Merge pull request #6934 from acmesh-official/dev

sync

.github/copilot-instructions.md

@@ -0,0 +1,190 @@
+# GitHub Copilot Shell Scripting (sh) Review Instructions for acme.sh
+
+## Overall Goal
+
+Your role is to act as a rigorous yet helpful senior engineer, reviewing Shell script code (`.sh` files) for the [acme.sh](https://github.com/acmesh-official/acme.sh) project. Ensure the code exhibits the highest levels of robustness, security, and portability.
+The review must focus on risks unique to Shell scripting, such as proper quoting, robust error handling, and the secure execution of external commands.
+
+## Required Output Format
+
+Organize the feedback into a single, structured report, using the three-level marking system:
+
+1. **Critical Issues (Must Fix Before Merge)**
+2. **Suggestions (Improvements to Consider)**
+3. **Good Practices (Points to Commend)**
+
+---
+
+## Shell Compatibility
+
+- **POSIX sh only** -- all scripts must target `sh`, not `bash`. No bash-isms allowed.
+- **Shebang**: always use `#!/usr/bin/env sh` (not `#!/bin/sh`, not `#!/usr/bin/env bash`).
+- **Use `return`, never `exit`** -- scripts are sourced, not executed as subprocesses. `exit` would kill the parent shell.
+- **Cross-platform**: code must work on Linux, macOS, FreeBSD, Solaris, and BusyBox environments.
+
+---
+
+## Robustness and Error Handling
+
+- **(Critical)** Enforce the use of the following combination at the start of the script for safety and robustness:
+  - `set -e`: Exit immediately if a command exits with a non-zero status.
+  - `set -u`: Treat unset variables as an error and exit.
+  - `set -o pipefail`: Ensure the whole pipeline fails if any command in the pipe fails.
+- **Always check return values** of function calls. If an error occurs, there must be a way to stop execution.
+- **Return 1** after `_err` messages:
+  ```sh
+  if [ -z "$VARIABLE" ]; then
+    _err "VARIABLE is required"
+    return 1
+  fi
+  ```
+- Check for the use of `mktemp` when creating temporary files to prevent race conditions and security risks.
+
+---
+
+## Security and Quoting
+
+- **(Critical)** Check that all variable expansions (like `$VAR` and `$(COMMAND)`) are properly enclosed in **double quotes** (i.e., `"$VAR"` and `"$(COMMAND)"`) to prevent **Word Splitting** and **Globbing**.
+- **(Critical)** Find and flag any hardcoded passwords, keys, tokens, or authentication details.
+- Verify that all user input, command-line arguments (`$1`, `$2`, etc.), or environment variables are rigorously validated and sanitized before use.
+- Avoid `eval` -- warn against and suggest alternatives, as it can lead to arbitrary code execution.
+
+---
+
+## Use Built-in Helper Functions
+
+Never use raw shell commands when acme.sh provides a wrapper function. This is the most critical rule for portability.
+
+| Instead of | Use |
+|---|---|
+| `tr '[:upper:]' '[:lower:]'` | `_lower_case()` |
+| `tr '[:lower:]' '[:upper:]'` | `_upper_case()` |
+| `head -n 1` | `_head_n 1` |
+| `openssl dgst` / `openssl` | `_digest()` / `_hmac()` |
+| `date` | `_utc_date()` with `sed`/`tr` |
+| `curl` / `wget` | `_get()` or `_post()` |
+| `sleep` | `_sleep` |
+| `base64` / `openssl base64` | `_base64()` |
+| `$(( ))` arithmetic | `_math()` |
+| `grep -E` / `grep -Po` | `_egrep_o()` |
+| `printf` | `echo` |
+| `idn` command | `_idn()` / `_is_idn()` |
+| `mktemp` | `_mktemp()` |
+| `[:space:]` | ` ` |
+| `[:alnum:]` | `A-Za-z0-9` |
+| `[:alpha:]` | `A-Za-z` |
+| `[:digit:]` | `0-9` |
+| `awk` | `cut` / `sed` / `while read` loops |
+
+
+
+When fixing a pattern issue, fix **all instances** in the file, not just the one highlighted.
+
+---
+
+## Forbidden External Tools
+
+Do not use these commands -- they are not portable across all target platforms:
+
+- `jq` (parse JSON with built-in string manipulation)
+- `grep -A` (removed throughout the project)
+- `grep -Po` (Perl regex not available everywhere)
+- `rev`, `xargs`, `iconv`
+- If you must depend on an external tool, check with `_exists` first:
+  ```sh
+  if ! _exists jq; then
+    _err "jq is required"
+    return 1
+  fi
+  ```
+- Warn against patterns like `for i in $(cat file)` or `for i in $(ls)` and recommend the more robust `while IFS= read -r line` pattern for safely processing file contents or filenames that might contain spaces.
+
+---
+
+## Configuration Management
+
+Use the correct save/read functions depending on hook type:
+
+- **DNS hooks**: `_readaccountconf_mutable` to read API keys, `_saveaccountconf_mutable` to save them. Do not use `_saveaccountconf` or `_readaccountconf`.
+- **Deploy hooks**: `_savedeployconf` / `_getdeployconf`
+- **Notification hooks**: use account conf functions.
+- Save operations should only happen in the correct lifecycle function (e.g., `_issue()`).
+- Use environment variables for all configurable values -- do not introduce hardcoded config files.
+- Do not clear account conf without a clear reason.
+
+---
+
+## DNS API Conventions
+
+- Read the [DNS API Dev Guide](https://github.com/acmesh-official/acme.sh/wiki/DNS-API-Dev-Guide) before writing a DNS plugin.
+- Each file under `dnsapi/` must contain a `{filename}_add` function for adding DNS TXT records.
+- The `_get_root()` loop counter `i` must start from `1` (not `2`) to support DNS alias mode.
+- The `dns_*_rm()` function must remove records **by TXT value**, not by replacing/updating. See [#1261](https://github.com/acmesh-official/acme.sh/issues/1261).
+- Preserve the `dns_*_info` metadata variable block in each DNS script header.
+
+---
+
+## Variable Naming
+
+- Use CamelCase with provider prefix: `KINGHOST_Username` (not `KINGHOST_username`).
+- Variable names should use uppercase letters and underscores (e.g., `MY_VARIABLE`), or follow established project conventions.
+- Avoid confusingly similar names. Prefer one variable with comma-separated values over multiple variables (e.g., `CZ_Zones` with comma support instead of separate `CZ_Zone` and `CZ_Zones`).
+- Do not define variables with the same name in different scopes.
+- Variables inside functions should be declared using the `local` keyword to avoid unintentionally modifying global state.
+
+---
+
+## Code Style
+
+- Use `shfmt` for formatting -- CI enforces it.
+- Reduce indentation where possible.
+- Single space, not double spaces.
+- No trailing semicolons after `return` statements.
+- Add a newline at the end of every file.
+- Use `$(command)` over backticks `` `command` `` for command substitution.
+
+---
+
+## Simplicity
+
+- Prefer hardcoded sensible defaults over unnecessary configuration variables (e.g., use `3600` for TTL instead of a `DESEC_TTL` variable).
+- Reject over-engineered solutions. If it can be done in one line, do it in one line.
+- Follow existing patterns in the codebase -- new hooks should look like existing hooks.
+- Respect user choices: do not `chmod` files that already exist; the user's permissions take priority.
+
+---
+
+## Documentation Requirements
+
+Before a PR can be merged, the following documentation must be provided:
+
+- **Wiki page**: add or update the relevant page:
+  - DNS APIs: [dnsapi](https://github.com/acmesh-official/acme.sh/wiki/dnsapi) or [dnsapi2](https://github.com/acmesh-official/acme.sh/wiki/dnsapi2)
+  - Deploy hooks: [deployhooks](https://github.com/acmesh-official/acme.sh/wiki/deployhooks)
+  - Notification hooks: [notify](https://github.com/acmesh-official/acme.sh/wiki/notify)
+  - Options: [Options-and-Params](https://github.com/acmesh-official/acme.sh/wiki/Options-and-Params)
+- **In-code usage**: add usage examples in the help text of `acme.sh` itself.
+- **README**: add website URLs for new DNS providers.
+
+---
+
+## CI and Merge Hygiene
+
+- All CI checks must pass before merge.
+- Rebase to the latest `dev` branch frequently -- do not use merge commits.
+- Enable GitHub Actions on your fork to catch errors early.
+- Run the [DNS API Test](https://github.com/acmesh-official/acme.sh/wiki/DNS-API-Test) workflow for DNS plugins.
+- For Docker changes, ensure the Dockerfile includes any required dependencies.
+
+---
+
+## Debug Logging
+
+- Use `_debug2` (not `_debug3` or other levels) unless there is a specific reason for a different level.
+
+---
+
+## Things to Avoid in Reviews
+
+- Do not comment on purely stylistic issues like spacing or indentation, which should be handled by tools like ShellCheck or `shfmt`.
+- Do not be overly verbose unless a significant issue is found. Keep feedback concise and actionable.

.github/workflows/DNS.yml

@@ -66,7 +66,7 @@ jobs:
       TokenName4: ${{ secrets.TokenName4}}
       TokenName5: ${{ secrets.TokenName5}}
     steps:
-    - uses: actions/checkout@v4
+    - uses: actions/checkout@v6
     - name: Clone acmetest
       run: cd .. && git clone --depth=1 https://github.com/acmesh-official/acmetest.git  && cp -r acme.sh acmetest/
     - name: Set env file
@@ -114,7 +114,7 @@ jobs:
       TokenName4: ${{ secrets.TokenName4}}
       TokenName5: ${{ secrets.TokenName5}}
     steps:
-    - uses: actions/checkout@v4
+    - uses: actions/checkout@v6
     - name: Install tools
       run:  brew install socat
     - name: Clone acmetest
@@ -165,7 +165,7 @@ jobs:
     - name: Set git to use LF
       run: |
           git config --global core.autocrlf false
-    - uses: actions/checkout@v4
+    - uses: actions/checkout@v6
     - name: Install cygwin base packages with chocolatey
       run: |
           choco config get cacheLocation
@@ -224,15 +224,16 @@ jobs:
       TokenName4: ${{ secrets.TokenName4}}
       TokenName5: ${{ secrets.TokenName5}}
     steps:
-    - uses: actions/checkout@v4
+    - uses: actions/checkout@v6
     - name: Clone acmetest
       run: cd .. && git clone --depth=1 https://github.com/acmesh-official/acmetest.git  && cp -r acme.sh acmetest/
     - uses: vmactions/freebsd-vm@v1
       with:
+        debug-on-error: ${{ vars.DEBUG_ON_ERROR }}
         envs: 'TEST_DNS TestingDomain TEST_DNS_NO_WILDCARD TEST_DNS_NO_SUBDOMAIN TEST_DNS_SLEEP CASE TEST_LOCAL DEBUG http_proxy https_proxy TokenName1 TokenName2 TokenName3 TokenName4 TokenName5 ${{ secrets.TokenName1}} ${{ secrets.TokenName2}} ${{ secrets.TokenName3}} ${{ secrets.TokenName4}} ${{ secrets.TokenName5}}'
         prepare: pkg install -y socat curl
         usesh: true
-        copyback: false
+        sync: nfs
         run: |
           if [ "${{ secrets.TokenName1}}" ] ; then
             export ${{ secrets.TokenName1}}="${{ secrets.TokenValue1}}"
@@ -251,7 +252,11 @@ jobs:
           fi
           cd ../acmetest
           ./letest.sh
-
+    - name: DebugOnError
+      if: ${{ failure() }}
+      run: |
+        echo "See how to debug in VM:"
+        echo "https://github.com/acmesh-official/acme.sh/wiki/debug-in-VM"
 
 
 
@@ -275,15 +280,16 @@ jobs:
       TokenName4: ${{ secrets.TokenName4}}
       TokenName5: ${{ secrets.TokenName5}}
     steps:
-    - uses: actions/checkout@v4
+    - uses: actions/checkout@v6
     - name: Clone acmetest
       run: cd .. && git clone --depth=1 https://github.com/acmesh-official/acmetest.git  && cp -r acme.sh acmetest/
     - uses: vmactions/openbsd-vm@v1
       with:
+        debug-on-error: ${{ vars.DEBUG_ON_ERROR }}
         envs: 'TEST_DNS TestingDomain TEST_DNS_NO_WILDCARD TEST_DNS_NO_SUBDOMAIN TEST_DNS_SLEEP CASE TEST_LOCAL DEBUG http_proxy https_proxy TokenName1 TokenName2 TokenName3 TokenName4 TokenName5 ${{ secrets.TokenName1}} ${{ secrets.TokenName2}} ${{ secrets.TokenName3}} ${{ secrets.TokenName4}} ${{ secrets.TokenName5}}'
         prepare: pkg_add socat curl libiconv
         usesh: true
-        copyback: false
+        sync: nfs
         run: |
           if [ "${{ secrets.TokenName1}}" ] ; then
             export ${{ secrets.TokenName1}}="${{ secrets.TokenValue1}}"
@@ -302,7 +308,11 @@ jobs:
           fi
           cd ../acmetest
           ./letest.sh
-
+    - name: DebugOnError
+      if: ${{ failure() }}
+      run: |
+        echo "See how to debug in VM:"
+        echo "https://github.com/acmesh-official/acme.sh/wiki/debug-in-VM"
 
 
 
@@ -326,16 +336,17 @@ jobs:
       TokenName4: ${{ secrets.TokenName4}}
       TokenName5: ${{ secrets.TokenName5}}
     steps:
-    - uses: actions/checkout@v4
+    - uses: actions/checkout@v6
     - name: Clone acmetest
       run: cd .. && git clone --depth=1 https://github.com/acmesh-official/acmetest.git  && cp -r acme.sh acmetest/
     - uses: vmactions/netbsd-vm@v1
       with:
+        debug-on-error: ${{ vars.DEBUG_ON_ERROR }}
         envs: 'TEST_DNS TestingDomain TEST_DNS_NO_WILDCARD TEST_DNS_NO_SUBDOMAIN TEST_DNS_SLEEP CASE TEST_LOCAL DEBUG http_proxy https_proxy TokenName1 TokenName2 TokenName3 TokenName4 TokenName5 ${{ secrets.TokenName1}} ${{ secrets.TokenName2}} ${{ secrets.TokenName3}} ${{ secrets.TokenName4}} ${{ secrets.TokenName5}}'
         prepare: |
           /usr/sbin/pkg_add curl socat
         usesh: true
-        copyback: false
+        sync: nfs
         run: |
           if [ "${{ secrets.TokenName1}}" ] ; then
             export ${{ secrets.TokenName1}}="${{ secrets.TokenValue1}}"
@@ -354,7 +365,11 @@ jobs:
           fi
           cd ../acmetest
           ./letest.sh
-
+    - name: DebugOnError
+      if: ${{ failure() }}
+      run: |
+        echo "See how to debug in VM:"
+        echo "https://github.com/acmesh-official/acme.sh/wiki/debug-in-VM"
 
 
 
@@ -378,16 +393,18 @@ jobs:
       TokenName4: ${{ secrets.TokenName4}}
       TokenName5: ${{ secrets.TokenName5}}
     steps:
-    - uses: actions/checkout@v4
+    - uses: actions/checkout@v6
     - name: Clone acmetest
       run: cd .. && git clone --depth=1 https://github.com/acmesh-official/acmetest.git  && cp -r acme.sh acmetest/
     - uses: vmactions/dragonflybsd-vm@v1
       with:
+        debug-on-error: ${{ vars.DEBUG_ON_ERROR }}
         envs: 'TEST_DNS TestingDomain TEST_DNS_NO_WILDCARD TEST_DNS_NO_SUBDOMAIN TEST_DNS_SLEEP CASE TEST_LOCAL DEBUG http_proxy https_proxy TokenName1 TokenName2 TokenName3 TokenName4 TokenName5 ${{ secrets.TokenName1}} ${{ secrets.TokenName2}} ${{ secrets.TokenName3}} ${{ secrets.TokenName4}} ${{ secrets.TokenName5}}'
         prepare: |
-          pkg install -y curl socat libnghttp2
+          pkg install -y libnghttp2
+          pkg install -y curl socat
         usesh: true
-        copyback: false
+        sync: nfs
         run: |
           if [ "${{ secrets.TokenName1}}" ] ; then
             export ${{ secrets.TokenName1}}="${{ secrets.TokenValue1}}"
@@ -406,16 +423,76 @@ jobs:
           fi
           cd ../acmetest
           ./letest.sh
+    - name: DebugOnError
+      if: ${{ failure() }}
+      run: |
+        echo "See how to debug in VM:"
+        echo "https://github.com/acmesh-official/acme.sh/wiki/debug-in-VM"
 
 
 
 
 
 
+  MidnightBSD:
+    runs-on: ubuntu-latest
+    needs: DragonFlyBSD
+    env:
+      TEST_DNS : ${{ secrets.TEST_DNS }}
+      TestingDomain: ${{ secrets.TestingDomain }}
+      TEST_DNS_NO_WILDCARD: ${{ secrets.TEST_DNS_NO_WILDCARD }}
+      TEST_DNS_NO_SUBDOMAIN: ${{ secrets.TEST_DNS_NO_SUBDOMAIN }}
+      TEST_DNS_SLEEP: ${{ secrets.TEST_DNS_SLEEP }}
+      CASE: le_test_dnsapi
+      TEST_LOCAL: 1
+      DEBUG: ${{ secrets.DEBUG }}
+      http_proxy: ${{ secrets.http_proxy }}
+      https_proxy: ${{ secrets.https_proxy }}
+      TokenName1: ${{ secrets.TokenName1}}
+      TokenName2: ${{ secrets.TokenName2}}
+      TokenName3: ${{ secrets.TokenName3}}
+      TokenName4: ${{ secrets.TokenName4}}
+      TokenName5: ${{ secrets.TokenName5}}
+    steps:
+    - uses: actions/checkout@v6
+    - name: Clone acmetest
+      run: cd .. && git clone --depth=1 https://github.com/acmesh-official/acmetest.git  && cp -r acme.sh acmetest/
+    - uses: vmactions/midnightbsd-vm@v1
+      with:
+        debug-on-error: ${{ vars.DEBUG_ON_ERROR }}
+        envs: 'TEST_DNS TestingDomain TEST_DNS_NO_WILDCARD TEST_DNS_NO_SUBDOMAIN TEST_DNS_SLEEP CASE TEST_LOCAL DEBUG http_proxy https_proxy TokenName1 TokenName2 TokenName3 TokenName4 TokenName5 ${{ secrets.TokenName1}} ${{ secrets.TokenName2}} ${{ secrets.TokenName3}} ${{ secrets.TokenName4}} ${{ secrets.TokenName5}}'
+        prepare: mport install socat curl || true
+        usesh: true
+        sync: nfs
+        run: |
+          if [ "${{ secrets.TokenName1}}" ] ; then
+            export ${{ secrets.TokenName1}}="${{ secrets.TokenValue1}}"
+          fi
+          if [ "${{ secrets.TokenName2}}" ] ; then
+            export ${{ secrets.TokenName2}}="${{ secrets.TokenValue2}}"
+          fi
+          if [ "${{ secrets.TokenName3}}" ] ; then
+            export ${{ secrets.TokenName3}}="${{ secrets.TokenValue3}}"
+          fi
+          if [ "${{ secrets.TokenName4}}" ] ; then
+            export ${{ secrets.TokenName4}}="${{ secrets.TokenValue4}}"
+          fi
+          if [ "${{ secrets.TokenName5}}" ] ; then
+            export ${{ secrets.TokenName5}}="${{ secrets.TokenValue5}}"
+          fi
+          cd ../acmetest
+          ./letest.sh
+    - name: DebugOnError
+      if: ${{ failure() }}
+      run: |
+        echo "See how to debug in VM:"
+        echo "https://github.com/acmesh-official/acme.sh/wiki/debug-in-VM"
+
+
 
   Solaris:
     runs-on: ubuntu-latest
-    needs: DragonFlyBSD
+    needs: MidnightBSD
     env:
       TEST_DNS : ${{ secrets.TEST_DNS }}
       TestingDomain: ${{ secrets.TestingDomain }}
@@ -434,14 +511,17 @@ jobs:
       TokenName4: ${{ secrets.TokenName4}}
       TokenName5: ${{ secrets.TokenName5}}
     steps:
-    - uses: actions/checkout@v4
+    - uses: actions/checkout@v6
     - name: Clone acmetest
       run: cd .. && git clone --depth=1 https://github.com/acmesh-official/acmetest.git  && cp -r acme.sh acmetest/
     - uses: vmactions/solaris-vm@v1
       with:
+        debug-on-error: ${{ vars.DEBUG_ON_ERROR }}
         envs: 'TEST_DNS TestingDomain TEST_DNS_NO_WILDCARD TEST_DNS_NO_SUBDOMAIN TEST_DNS_SLEEP CASE TEST_LOCAL DEBUG http_proxy https_proxy HTTPS_INSECURE TokenName1 TokenName2 TokenName3 TokenName4 TokenName5 ${{ secrets.TokenName1}} ${{ secrets.TokenName2}} ${{ secrets.TokenName3}} ${{ secrets.TokenName4}} ${{ secrets.TokenName5}}'
-        copyback: false
-        prepare: pkgutil -y -i socat
+        sync: nfs
+        prepare: |
+          pkgutil -U
+          pkgutil -y -i socat
         run: |
           pkg set-mediator -v -I default@1.1 openssl
           export PATH=/usr/gnu/bin:$PATH
@@ -462,6 +542,11 @@ jobs:
           fi
           cd ../acmetest
           ./letest.sh
+    - name: DebugOnError
+      if: ${{ failure() }}
+      run: |
+        echo "See how to debug in VM:"
+        echo "https://github.com/acmesh-official/acme.sh/wiki/debug-in-VM"
 
 
   Omnios:
@@ -485,13 +570,14 @@ jobs:
       TokenName4: ${{ secrets.TokenName4}}
       TokenName5: ${{ secrets.TokenName5}}
     steps:
-    - uses: actions/checkout@v4
+    - uses: actions/checkout@v6
     - name: Clone acmetest
       run: cd .. && git clone --depth=1 https://github.com/acmesh-official/acmetest.git  && cp -r acme.sh acmetest/
     - uses: vmactions/omnios-vm@v1
       with:
+        debug-on-error: ${{ vars.DEBUG_ON_ERROR }}
         envs: 'TEST_DNS TestingDomain TEST_DNS_NO_WILDCARD TEST_DNS_NO_SUBDOMAIN TEST_DNS_SLEEP CASE TEST_LOCAL DEBUG http_proxy https_proxy HTTPS_INSECURE TokenName1 TokenName2 TokenName3 TokenName4 TokenName5 ${{ secrets.TokenName1}} ${{ secrets.TokenName2}} ${{ secrets.TokenName3}} ${{ secrets.TokenName4}} ${{ secrets.TokenName5}}'
-        copyback: false
+        sync: nfs
         prepare: pkg install socat
         run: |
           if [ "${{ secrets.TokenName1}}" ] ; then
@@ -511,5 +597,127 @@ jobs:
           fi
           cd ../acmetest
           ./letest.sh
+    - name: DebugOnError
+      if: ${{ failure() }}
+      run: |
+        echo "See how to debug in VM:"
+        echo "https://github.com/acmesh-official/acme.sh/wiki/debug-in-VM"
+
+
+
+  OpenIndiana:
+    runs-on: ubuntu-latest
+    needs: Omnios
+    env:
+      TEST_DNS : ${{ secrets.TEST_DNS }}
+      TestingDomain: ${{ secrets.TestingDomain }}
+      TEST_DNS_NO_WILDCARD: ${{ secrets.TEST_DNS_NO_WILDCARD }}
+      TEST_DNS_NO_SUBDOMAIN: ${{ secrets.TEST_DNS_NO_SUBDOMAIN }}
+      TEST_DNS_SLEEP: ${{ secrets.TEST_DNS_SLEEP }}
+      CASE: le_test_dnsapi
+      TEST_LOCAL: 1
+      DEBUG: ${{ secrets.DEBUG }}
+      http_proxy: ${{ secrets.http_proxy }}
+      https_proxy: ${{ secrets.https_proxy }}
+      HTTPS_INSECURE: 1 # always set to 1 to ignore https error, since OpenIndiana doesn't accept the expired ISRG X1 root
+      TokenName1: ${{ secrets.TokenName1}}
+      TokenName2: ${{ secrets.TokenName2}}
+      TokenName3: ${{ secrets.TokenName3}}
+      TokenName4: ${{ secrets.TokenName4}}
+      TokenName5: ${{ secrets.TokenName5}}
+    steps:
+    - uses: actions/checkout@v6
+    - name: Clone acmetest
+      run: cd .. && git clone --depth=1 https://github.com/acmesh-official/acmetest.git  && cp -r acme.sh acmetest/
+    - uses: vmactions/openindiana-vm@v1
+      with:
+        debug-on-error: ${{ vars.DEBUG_ON_ERROR }}
+        envs: 'TEST_DNS TestingDomain TEST_DNS_NO_WILDCARD TEST_DNS_NO_SUBDOMAIN TEST_DNS_SLEEP CASE TEST_LOCAL DEBUG http_proxy https_proxy HTTPS_INSECURE TokenName1 TokenName2 TokenName3 TokenName4 TokenName5 ${{ secrets.TokenName1}} ${{ secrets.TokenName2}} ${{ secrets.TokenName3}} ${{ secrets.TokenName4}} ${{ secrets.TokenName5}}'
+        sync: nfs
+        prepare: pkg install socat
+        run: |
+          if [ "${{ secrets.TokenName1}}" ] ; then
+            export ${{ secrets.TokenName1}}="${{ secrets.TokenValue1}}"
+          fi
+          if [ "${{ secrets.TokenName2}}" ] ; then
+            export ${{ secrets.TokenName2}}="${{ secrets.TokenValue2}}"
+          fi
+          if [ "${{ secrets.TokenName3}}" ] ; then
+            export ${{ secrets.TokenName3}}="${{ secrets.TokenValue3}}"
+          fi
+          if [ "${{ secrets.TokenName4}}" ] ; then
+            export ${{ secrets.TokenName4}}="${{ secrets.TokenValue4}}"
+          fi
+          if [ "${{ secrets.TokenName5}}" ] ; then
+            export ${{ secrets.TokenName5}}="${{ secrets.TokenValue5}}"
+          fi
+          cd ../acmetest
+          ./letest.sh
+    - name: DebugOnError
+      if: ${{ failure() }}
+      run: |
+        echo "See how to debug in VM:"
+        echo "https://github.com/acmesh-official/acme.sh/wiki/debug-in-VM"
+
+
+        
+  Haiku:
+    runs-on: ubuntu-latest
+    needs: OpenIndiana
+    env:
+      TEST_DNS : ${{ secrets.TEST_DNS }}
+      TestingDomain: ${{ secrets.TestingDomain }}
+      TEST_DNS_NO_WILDCARD: ${{ secrets.TEST_DNS_NO_WILDCARD }}
+      TEST_DNS_NO_SUBDOMAIN: ${{ secrets.TEST_DNS_NO_SUBDOMAIN }}
+      TEST_DNS_SLEEP: ${{ secrets.TEST_DNS_SLEEP }}
+      CASE: le_test_dnsapi
+      TEST_LOCAL: 1
+      DEBUG: ${{ secrets.DEBUG }}
+      http_proxy: ${{ secrets.http_proxy }}
+      https_proxy: ${{ secrets.https_proxy }}
+      HTTPS_INSECURE: 1 # always set to 1 to ignore https error, since OpenIndiana doesn't accept the expired ISRG X1 root
+      TokenName1: ${{ secrets.TokenName1}}
+      TokenName2: ${{ secrets.TokenName2}}
+      TokenName3: ${{ secrets.TokenName3}}
+      TokenName4: ${{ secrets.TokenName4}}
+      TokenName5: ${{ secrets.TokenName5}}
+    steps:
+    - uses: actions/checkout@v6
+    - name: Clone acmetest
+      run: cd .. && git clone --depth=1 https://github.com/acmesh-official/acmetest.git  && cp -r acme.sh acmetest/
+    - uses: vmactions/haiku-vm@v1
+      with:
+        debug-on-error: ${{ vars.DEBUG_ON_ERROR }}
+        envs: 'TEST_DNS TestingDomain TEST_DNS_NO_WILDCARD TEST_DNS_NO_SUBDOMAIN TEST_DNS_SLEEP CASE TEST_LOCAL DEBUG http_proxy https_proxy HTTPS_INSECURE TokenName1 TokenName2 TokenName3 TokenName4 TokenName5 ${{ secrets.TokenName1}} ${{ secrets.TokenName2}} ${{ secrets.TokenName3}} ${{ secrets.TokenName4}} ${{ secrets.TokenName5}}'
+        sync: rsync
+        copyback: false
+        prepare: |
+          mkdir -p /boot/home/.cache
+          pkgman install -y cronie
+          
+        run: |
+          if [ "${{ secrets.TokenName1}}" ] ; then
+            export ${{ secrets.TokenName1}}="${{ secrets.TokenValue1}}"
+          fi
+          if [ "${{ secrets.TokenName2}}" ] ; then
+            export ${{ secrets.TokenName2}}="${{ secrets.TokenValue2}}"
+          fi
+          if [ "${{ secrets.TokenName3}}" ] ; then
+            export ${{ secrets.TokenName3}}="${{ secrets.TokenValue3}}"
+          fi
+          if [ "${{ secrets.TokenName4}}" ] ; then
+            export ${{ secrets.TokenName4}}="${{ secrets.TokenValue4}}"
+          fi
+          if [ "${{ secrets.TokenName5}}" ] ; then
+            export ${{ secrets.TokenName5}}="${{ secrets.TokenValue5}}"
+          fi
+          cd ../acmetest
+          ./letest.sh
+    - name: DebugOnError
+      if: ${{ failure() }}
+      run: |
+        echo "See how to debug in VM:"
+        echo "https://github.com/acmesh-official/acme.sh/wiki/debug-in-VM"
+
 
 

.github/workflows/DragonFlyBSD.yml

@@ -31,8 +31,8 @@ jobs:
            CA_EMAIL: ""
            TEST_PREFERRED_CHAIN: (STAGING)
          #- TEST_ACME_Server: "ZeroSSL.com"
-         #  CA_ECDSA: "ZeroSSL ECC Domain Secure Site CA"
-         #  CA: "ZeroSSL RSA Domain Secure Site CA"
+         #  CA_ECDSA: "ZeroSSL ECC DV SSL CA 2"
+         #  CA: "ZeroSSL RSA DV SSL CA 2"
          #  CA_EMAIL: "githubtest@acme.sh"
          #  TEST_PREFERRED_CHAIN: ""
     runs-on: ubuntu-latest
@@ -45,8 +45,8 @@ jobs:
       TEST_PREFERRED_CHAIN: ${{ matrix.TEST_PREFERRED_CHAIN }}
       ACME_USE_WGET: ${{ matrix.ACME_USE_WGET }}
     steps:
-    - uses: actions/checkout@v4
-    - uses: vmactions/cf-tunnel@v0
+    - uses: actions/checkout@v6
+    - uses: anyvm-org/cf-tunnel@v0
       id: tunnel
       with:
         protocol: http
@@ -57,15 +57,21 @@ jobs:
       run: cd .. && git clone --depth=1 https://github.com/acmesh-official/acmetest.git  && cp -r acme.sh acmetest/
     - uses: vmactions/dragonflybsd-vm@v1
       with:
+        debug-on-error: ${{ vars.DEBUG_ON_ERROR }}
         envs: 'TEST_LOCAL TestingDomain TEST_ACME_Server CA_ECDSA CA CA_EMAIL TEST_PREFERRED_CHAIN ACME_USE_WGET'
         nat: |
           "8080": "80"
         prepare: |
-          pkg install -y curl socat libnghttp2
+          pkg install -y libnghttp2
+          pkg install -y curl socat
         usesh: true
-        copyback: false
+        sync: nfs
         run: |
           cd ../acmetest \
           && ./letest.sh
-
+    - name: DebugOnError
+      if: ${{ failure() }}
+      run: |
+        echo "See how to debug in VM:"
+        echo "https://github.com/acmesh-official/acme.sh/wiki/debug-in-VM"
 

.github/workflows/FreeBSD.yml

@@ -37,8 +37,8 @@ jobs:
            TEST_PREFERRED_CHAIN: (STAGING)
            ACME_USE_WGET: 1
          #- TEST_ACME_Server: "ZeroSSL.com"
-         #  CA_ECDSA: "ZeroSSL ECC Domain Secure Site CA"
-         #  CA: "ZeroSSL RSA Domain Secure Site CA"
+         #  CA_ECDSA: "ZeroSSL ECC DV SSL CA 2"
+         #  CA: "ZeroSSL RSA DV SSL CA 2"
          #  CA_EMAIL: "githubtest@acme.sh"
          #  TEST_PREFERRED_CHAIN: ""
     runs-on: ubuntu-latest
@@ -51,8 +51,8 @@ jobs:
       TEST_PREFERRED_CHAIN: ${{ matrix.TEST_PREFERRED_CHAIN }}
       ACME_USE_WGET: ${{ matrix.ACME_USE_WGET }}
     steps:
-    - uses: actions/checkout@v4
-    - uses: vmactions/cf-tunnel@v0
+    - uses: actions/checkout@v6
+    - uses: anyvm-org/cf-tunnel@v0
       id: tunnel
       with:
         protocol: http
@@ -63,14 +63,19 @@ jobs:
       run: cd .. && git clone --depth=1 https://github.com/acmesh-official/acmetest.git  && cp -r acme.sh acmetest/
     - uses: vmactions/freebsd-vm@v1
       with:
+        debug-on-error: ${{ vars.DEBUG_ON_ERROR }}
         envs: 'TEST_LOCAL TestingDomain TEST_ACME_Server CA_ECDSA CA CA_EMAIL TEST_PREFERRED_CHAIN ACME_USE_WGET'
         nat: |
           "8080": "80"
         prepare: pkg install -y socat curl wget
         usesh: true
-        copyback: false
+        sync: nfs
         run: |
           cd ../acmetest \
           && ./letest.sh
-
+    - name: DebugOnError
+      if: ${{ failure() }}
+      run: |
+        echo "See how to debug in VM:"
+        echo "https://github.com/acmesh-official/acme.sh/wiki/debug-in-VM"
 

.github/workflows/Haiku.yml

@@ -0,0 +1,84 @@
+name: Haiku
+on:
+  push:
+    branches:
+      - '*'
+    paths:
+      - '*.sh'
+      - '.github/workflows/Haiku.yml'
+
+  pull_request:
+    branches:
+      - dev
+    paths:
+      - '*.sh'
+      - '.github/workflows/Haiku.yml'
+
+concurrency: 
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+
+
+
+jobs:
+  Haiku:
+    strategy:
+      fail-fast: false
+      matrix:
+        include:
+         - TEST_ACME_Server: "LetsEncrypt.org_test"
+           CA_ECDSA: ""
+           CA: ""
+           CA_EMAIL: ""
+           TEST_PREFERRED_CHAIN: (STAGING)
+         - TEST_ACME_Server: "LetsEncrypt.org_test"
+           CA_ECDSA: ""
+           CA: ""
+           CA_EMAIL: ""
+           TEST_PREFERRED_CHAIN: (STAGING)
+           ACME_USE_WGET: 1
+         #- TEST_ACME_Server: "ZeroSSL.com"
+         #  CA_ECDSA: "ZeroSSL ECC DV SSL CA 2"
+         #  CA: "ZeroSSL RSA DV SSL CA 2"
+         #  CA_EMAIL: "githubtest@acme.sh"
+         #  TEST_PREFERRED_CHAIN: ""
+    runs-on: ubuntu-latest
+    env:
+      TEST_LOCAL: 1
+      TEST_ACME_Server: ${{ matrix.TEST_ACME_Server }}
+      CA_ECDSA: ${{ matrix.CA_ECDSA }}
+      CA: ${{ matrix.CA }}
+      CA_EMAIL: ${{ matrix.CA_EMAIL }}
+      TEST_PREFERRED_CHAIN: ${{ matrix.TEST_PREFERRED_CHAIN }}
+      ACME_USE_WGET: ${{ matrix.ACME_USE_WGET }}
+    steps:
+    - uses: actions/checkout@v6
+    - uses: anyvm-org/cf-tunnel@v0
+      id: tunnel
+      with:
+        protocol: http
+        port: 8080
+    - name: Set envs
+      run: echo "TestingDomain=${{steps.tunnel.outputs.server}}" >> $GITHUB_ENV
+    - name: Clone acmetest
+      run: cd .. && git clone --depth=1 https://github.com/acmesh-official/acmetest.git  && cp -r acme.sh acmetest/
+    - uses: vmactions/haiku-vm@v1
+      with:
+        debug-on-error: ${{ vars.DEBUG_ON_ERROR }}
+        envs: 'TEST_LOCAL TestingDomain TEST_ACME_Server CA_ECDSA CA CA_EMAIL TEST_PREFERRED_CHAIN ACME_USE_WGET'
+        nat: |
+          "8080": "80"
+        prepare: |
+          mkdir -p /boot/home/.cache
+          pkgman install -y cronie
+        sync: rsync
+        copyback: false
+        run: |
+          cd ../acmetest \
+          && ./letest.sh
+    - name: DebugOnError
+      if: ${{ failure() }}
+      run: |
+        echo "See how to debug in VM:"
+        echo "https://github.com/acmesh-official/acme.sh/wiki/debug-in-VM"
+

.github/workflows/Linux.yml

@@ -26,14 +26,21 @@ jobs:
   Linux:
     strategy:
       matrix:
-        os: ["ubuntu:latest", "debian:latest", "almalinux:latest", "fedora:latest", "opensuse/leap:latest", "alpine:latest", "oraclelinux:8", "kalilinux/kali", "archlinux:latest", "mageia", "gentoo/stage3"]
+        os: ["ubuntu:latest", "debian:latest", "almalinux:latest", "fedora:latest", "opensuse/leap:latest", "alpine:latest", "oraclelinux:8", "kalilinux/kali", "archlinux:latest", "gentoo/stage3"]
     runs-on: ubuntu-latest
     env:
       TEST_LOCAL: 1
       TEST_PREFERRED_CHAIN: (STAGING)
       TEST_ACME_Server: "LetsEncrypt.org_test"
     steps:
-    - uses: actions/checkout@v4
+    - uses: actions/checkout@v6
+    - uses: anyvm-org/cf-tunnel@v0
+      id: tunnel
+      with:
+        protocol: http
+        port: 80
+    - name: Set envs
+      run: echo "TestingDomain=${{steps.tunnel.outputs.server}}" >> $GITHUB_ENV
     - name: Clone acmetest
       run: |
           cd .. \

.github/workflows/MacOS.yml

@@ -31,8 +31,8 @@ jobs:
            CA_EMAIL: ""
            TEST_PREFERRED_CHAIN: (STAGING)
          #- TEST_ACME_Server: "ZeroSSL.com"
-         #  CA_ECDSA: "ZeroSSL ECC Domain Secure Site CA"
-         #  CA: "ZeroSSL RSA Domain Secure Site CA"
+         #  CA_ECDSA: "ZeroSSL ECC DV SSL CA 2"
+         #  CA: "ZeroSSL RSA DV SSL CA 2"
          #  CA_EMAIL: "githubtest@acme.sh"
          #  TEST_PREFERRED_CHAIN: ""
     runs-on: macos-latest
@@ -44,9 +44,16 @@ jobs:
       CA_EMAIL: ${{ matrix.CA_EMAIL }}
       TEST_PREFERRED_CHAIN: ${{ matrix.TEST_PREFERRED_CHAIN }}
     steps:
-    - uses: actions/checkout@v4
+    - uses: actions/checkout@v6
     - name: Install tools
       run:  brew install socat
+    - uses: anyvm-org/cf-tunnel@v0
+      id: tunnel
+      with:
+        protocol: http
+        port: 80
+    - name: Set envs
+      run: echo "TestingDomain=${{steps.tunnel.outputs.server}}" >> $GITHUB_ENV
     - name: Clone acmetest
       run: |
           cd .. \

.github/workflows/MidnightBSD.yml

@@ -0,0 +1,74 @@
+name: MidnightBSD
+on:
+  push:
+    branches:
+      - '*'
+    paths:
+      - '*.sh'
+      - '.github/workflows/MidnightBSD.yml'
+
+  pull_request:
+    branches:
+      - dev
+    paths:
+      - '*.sh'
+      - '.github/workflows/MidnightBSD.yml'
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+
+
+
+jobs:
+  MidnightBSD:
+    strategy:
+      matrix:
+        include:
+         - TEST_ACME_Server: "LetsEncrypt.org_test"
+           CA_ECDSA: ""
+           CA: ""
+           CA_EMAIL: ""
+           TEST_PREFERRED_CHAIN: (STAGING)
+         #- TEST_ACME_Server: "ZeroSSL.com"
+         #  CA_ECDSA: "ZeroSSL ECC DV SSL CA 2"
+         #  CA: "ZeroSSL RSA DV SSL CA 2"
+         #  CA_EMAIL: "githubtest@acme.sh"
+         #  TEST_PREFERRED_CHAIN: ""
+    runs-on: ubuntu-latest
+    env:
+      TEST_LOCAL: 1
+      TEST_ACME_Server: ${{ matrix.TEST_ACME_Server }}
+      CA_ECDSA: ${{ matrix.CA_ECDSA }}
+      CA: ${{ matrix.CA }}
+      CA_EMAIL: ${{ matrix.CA_EMAIL }}
+      TEST_PREFERRED_CHAIN: ${{ matrix.TEST_PREFERRED_CHAIN }}
+      ACME_USE_WGET: ${{ matrix.ACME_USE_WGET }}
+    steps:
+    - uses: actions/checkout@v6
+    - uses: anyvm-org/cf-tunnel@v0
+      id: tunnel
+      with:
+        protocol: http
+        port: 8080
+    - name: Set envs
+      run: echo "TestingDomain=${{steps.tunnel.outputs.server}}" >> $GITHUB_ENV
+    - name: Clone acmetest
+      run: cd .. && git clone --depth=1 https://github.com/acmesh-official/acmetest.git  && cp -r acme.sh acmetest/
+    - uses: vmactions/midnightbsd-vm@v1
+      with:
+        debug-on-error: ${{ vars.DEBUG_ON_ERROR }}
+        envs: 'TEST_LOCAL TestingDomain TEST_ACME_Server CA_ECDSA CA CA_EMAIL TEST_PREFERRED_CHAIN ACME_USE_WGET'
+        nat: |
+          "8080": "80"
+        prepare: mport install socat curl wget || true
+        usesh: true
+        sync: nfs
+        run: |
+          cd ../acmetest \
+          && ./letest.sh
+    - name: DebugOnError
+      if: ${{ failure() }}
+      run: |
+        echo "See how to debug in VM:"
+        echo "https://github.com/acmesh-official/acme.sh/wiki/debug-in-VM"

.github/workflows/NetBSD.yml

@@ -31,8 +31,8 @@ jobs:
            CA_EMAIL: ""
            TEST_PREFERRED_CHAIN: (STAGING)
          #- TEST_ACME_Server: "ZeroSSL.com"
-         #  CA_ECDSA: "ZeroSSL ECC Domain Secure Site CA"
-         #  CA: "ZeroSSL RSA Domain Secure Site CA"
+         #  CA_ECDSA: "ZeroSSL ECC DV SSL CA 2"
+         #  CA: "ZeroSSL RSA DV SSL CA 2"
          #  CA_EMAIL: "githubtest@acme.sh"
          #  TEST_PREFERRED_CHAIN: ""
     runs-on: ubuntu-latest
@@ -45,8 +45,8 @@ jobs:
       TEST_PREFERRED_CHAIN: ${{ matrix.TEST_PREFERRED_CHAIN }}
       ACME_USE_WGET: ${{ matrix.ACME_USE_WGET }}
     steps:
-    - uses: actions/checkout@v4
-    - uses: vmactions/cf-tunnel@v0
+    - uses: actions/checkout@v6
+    - uses: anyvm-org/cf-tunnel@v0
       id: tunnel
       with:
         protocol: http
@@ -57,15 +57,20 @@ jobs:
       run: cd .. && git clone --depth=1 https://github.com/acmesh-official/acmetest.git  && cp -r acme.sh acmetest/
     - uses: vmactions/netbsd-vm@v1
       with:
+        debug-on-error: ${{ vars.DEBUG_ON_ERROR }}
         envs: 'TEST_LOCAL TestingDomain TEST_ACME_Server CA_ECDSA CA CA_EMAIL TEST_PREFERRED_CHAIN ACME_USE_WGET'
         nat: |
           "8080": "80"
         prepare: |
           /usr/sbin/pkg_add curl socat
         usesh: true
-        copyback: false
+        sync: nfs
         run: |
           cd ../acmetest \
           && ./letest.sh
-
-
+    - name: DebugOnError
+      if: ${{ failure() }}
+      run: |
+        echo "See how to debug in VM:"
+        echo "https://github.com/acmesh-official/acme.sh/wiki/debug-in-VM"
+        

.github/workflows/Omnios.yml

@@ -37,8 +37,8 @@ jobs:
            TEST_PREFERRED_CHAIN: (STAGING)
            ACME_USE_WGET: 1
          #- TEST_ACME_Server: "ZeroSSL.com"
-         #  CA_ECDSA: "ZeroSSL ECC Domain Secure Site CA"
-         #  CA: "ZeroSSL RSA Domain Secure Site CA"
+         #  CA_ECDSA: "ZeroSSL ECC DV SSL CA 2"
+         #  CA: "ZeroSSL RSA DV SSL CA 2"
          #  CA_EMAIL: "githubtest@acme.sh"
          #  TEST_PREFERRED_CHAIN: ""
     runs-on: ubuntu-latest
@@ -51,8 +51,8 @@ jobs:
       TEST_PREFERRED_CHAIN: ${{ matrix.TEST_PREFERRED_CHAIN }}
       ACME_USE_WGET: ${{ matrix.ACME_USE_WGET }}
     steps:
-    - uses: actions/checkout@v4
-    - uses: vmactions/cf-tunnel@v0
+    - uses: actions/checkout@v6
+    - uses: anyvm-org/cf-tunnel@v0
       id: tunnel
       with:
         protocol: http
@@ -63,13 +63,18 @@ jobs:
       run: cd .. && git clone --depth=1 https://github.com/acmesh-official/acmetest.git  && cp -r acme.sh acmetest/
     - uses: vmactions/omnios-vm@v1
       with:
+        debug-on-error: ${{ vars.DEBUG_ON_ERROR }}
         envs: 'TEST_LOCAL TestingDomain TEST_ACME_Server CA_ECDSA CA CA_EMAIL TEST_PREFERRED_CHAIN ACME_USE_WGET'
         nat: |
           "8080": "80"
         prepare: pkg install socat wget
-        copyback: false
+        sync: nfs
         run: |
           cd ../acmetest \
           && ./letest.sh
-
+    - name: DebugOnError
+      if: ${{ failure() }}
+      run: |
+        echo "See how to debug in VM:"
+        echo "https://github.com/acmesh-official/acme.sh/wiki/debug-in-VM"
 

.github/workflows/OpenBSD.yml

@@ -37,8 +37,8 @@ jobs:
            TEST_PREFERRED_CHAIN: (STAGING)
            ACME_USE_WGET: 1
          #- TEST_ACME_Server: "ZeroSSL.com"
-         #  CA_ECDSA: "ZeroSSL ECC Domain Secure Site CA"
-         #  CA: "ZeroSSL RSA Domain Secure Site CA"
+         #  CA_ECDSA: "ZeroSSL ECC DV SSL CA 2"
+         #  CA: "ZeroSSL RSA DV SSL CA 2"
          #  CA_EMAIL: "githubtest@acme.sh"
          #  TEST_PREFERRED_CHAIN: ""
     runs-on: ubuntu-latest
@@ -51,8 +51,8 @@ jobs:
       TEST_PREFERRED_CHAIN: ${{ matrix.TEST_PREFERRED_CHAIN }}
       ACME_USE_WGET: ${{ matrix.ACME_USE_WGET }}
     steps:
-    - uses: actions/checkout@v4
-    - uses: vmactions/cf-tunnel@v0
+    - uses: actions/checkout@v6
+    - uses: anyvm-org/cf-tunnel@v0
       id: tunnel
       with:
         protocol: http
@@ -63,14 +63,19 @@ jobs:
       run: cd .. && git clone --depth=1 https://github.com/acmesh-official/acmetest.git  && cp -r acme.sh acmetest/
     - uses: vmactions/openbsd-vm@v1
       with:
+        debug-on-error: ${{ vars.DEBUG_ON_ERROR }}
         envs: 'TEST_LOCAL TestingDomain TEST_ACME_Server CA_ECDSA CA CA_EMAIL TEST_PREFERRED_CHAIN ACME_USE_WGET'
         nat: |
           "8080": "80"
         prepare: pkg_add socat curl wget libnghttp2
         usesh: true
-        copyback: false
+        sync: nfs
         run: |
           cd ../acmetest \
           && ./letest.sh
-
+    - name: DebugOnError
+      if: ${{ failure() }}
+      run: |
+        echo "See how to debug in VM:"
+        echo "https://github.com/acmesh-official/acme.sh/wiki/debug-in-VM"
 

.github/workflows/OpenIndiana.yml

@@ -0,0 +1,80 @@
+name: OpenIndiana
+on:
+  push:
+    branches:
+      - '*'
+    paths:
+      - '*.sh'
+      - '.github/workflows/OpenIndiana.yml'
+
+  pull_request:
+    branches:
+      - dev
+    paths:
+      - '*.sh'
+      - '.github/workflows/OpenIndiana.yml'
+
+concurrency: 
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+
+
+
+jobs:
+  OpenIndiana:
+    strategy:
+      matrix:
+        include:
+         - TEST_ACME_Server: "LetsEncrypt.org_test"
+           CA_ECDSA: ""
+           CA: ""
+           CA_EMAIL: ""
+           TEST_PREFERRED_CHAIN: (STAGING)
+         - TEST_ACME_Server: "LetsEncrypt.org_test"
+           CA_ECDSA: ""
+           CA: ""
+           CA_EMAIL: ""
+           TEST_PREFERRED_CHAIN: (STAGING)
+           ACME_USE_WGET: 1
+         #- TEST_ACME_Server: "ZeroSSL.com"
+         #  CA_ECDSA: "ZeroSSL ECC DV SSL CA 2"
+         #  CA: "ZeroSSL RSA DV SSL CA 2"
+         #  CA_EMAIL: "githubtest@acme.sh"
+         #  TEST_PREFERRED_CHAIN: ""
+    runs-on: ubuntu-latest
+    env:
+      TEST_LOCAL: 1
+      TEST_ACME_Server: ${{ matrix.TEST_ACME_Server }}
+      CA_ECDSA: ${{ matrix.CA_ECDSA }}
+      CA: ${{ matrix.CA }}
+      CA_EMAIL: ${{ matrix.CA_EMAIL }}
+      TEST_PREFERRED_CHAIN: ${{ matrix.TEST_PREFERRED_CHAIN }}
+      ACME_USE_WGET: ${{ matrix.ACME_USE_WGET }}
+    steps:
+    - uses: actions/checkout@v6
+    - uses: anyvm-org/cf-tunnel@v0
+      id: tunnel
+      with:
+        protocol: http
+        port: 8080
+    - name: Set envs
+      run: echo "TestingDomain=${{steps.tunnel.outputs.server}}" >> $GITHUB_ENV
+    - name: Clone acmetest
+      run: cd .. && git clone --depth=1 https://github.com/acmesh-official/acmetest.git  && cp -r acme.sh acmetest/
+    - uses: vmactions/openindiana-vm@v1
+      with:
+        debug-on-error: ${{ vars.DEBUG_ON_ERROR }}
+        envs: 'TEST_LOCAL TestingDomain TEST_ACME_Server CA_ECDSA CA CA_EMAIL TEST_PREFERRED_CHAIN ACME_USE_WGET'
+        nat: |
+          "8080": "80"
+        prepare: pkg install socat curl
+        sync: nfs
+        run: |
+          cd ../acmetest \
+          && ./letest.sh
+    - name: DebugOnError
+      if: ${{ failure() }}
+      run: |
+        echo "See how to debug in VM:"
+        echo "https://github.com/acmesh-official/acme.sh/wiki/debug-in-VM"
+

.github/workflows/PebbleStrict.yml

@@ -33,7 +33,7 @@ jobs:
       TEST_CA: "Pebble Intermediate CA"
 
     steps:
-    - uses: actions/checkout@v4
+    - uses: actions/checkout@v6
     - name: Install tools
       run: sudo apt-get install -y socat
     - name: Run Pebble
@@ -58,14 +58,14 @@ jobs:
       TEST_IPCERT: 1
 
     steps:
-    - uses: actions/checkout@v4
+    - uses: actions/checkout@v6
     - name: Install tools
       run: sudo apt-get install -y socat
     - name: Run Pebble
       run: |
         docker run --rm -itd --name=pebble \
         -e PEBBLE_VA_ALWAYS_VALID=1 \
-        -p 14000:14000 -p 15000:15000   letsencrypt/pebble:latest pebble -config /test/config/pebble-config.json -strict
+        -p 14000:14000 -p 15000:15000   ghcr.io/letsencrypt/pebble:latest -config /test/config/pebble-config.json -strict
     - name: Clone acmetest
       run: cd .. && git clone --depth=1 https://github.com/acmesh-official/acmetest.git  && cp -r acme.sh acmetest/
     - name: Run acmetest

.github/workflows/Solaris.yml

@@ -37,8 +37,8 @@ jobs:
            TEST_PREFERRED_CHAIN: (STAGING)
            ACME_USE_WGET: 1
          #- TEST_ACME_Server: "ZeroSSL.com"
-         #  CA_ECDSA: "ZeroSSL ECC Domain Secure Site CA"
-         #  CA: "ZeroSSL RSA Domain Secure Site CA"
+         #  CA_ECDSA: "ZeroSSL ECC DV SSL CA 2"
+         #  CA: "ZeroSSL RSA DV SSL CA 2"
          #  CA_EMAIL: "githubtest@acme.sh"
          #  TEST_PREFERRED_CHAIN: ""
     runs-on: ubuntu-latest
@@ -51,8 +51,8 @@ jobs:
       TEST_PREFERRED_CHAIN: ${{ matrix.TEST_PREFERRED_CHAIN }}
       ACME_USE_WGET: ${{ matrix.ACME_USE_WGET }}
     steps:
-    - uses: actions/checkout@v4
-    - uses: vmactions/cf-tunnel@v0
+    - uses: actions/checkout@v6
+    - uses: anyvm-org/cf-tunnel@v0
       id: tunnel
       with:
         protocol: http
@@ -63,13 +63,20 @@ jobs:
       run: cd .. && git clone --depth=1 https://github.com/acmesh-official/acmetest.git  && cp -r acme.sh acmetest/
     - uses: vmactions/solaris-vm@v1
       with:
+        debug-on-error: ${{ vars.DEBUG_ON_ERROR }}
         envs: 'TEST_LOCAL TestingDomain TEST_ACME_Server CA_ECDSA CA CA_EMAIL TEST_PREFERRED_CHAIN ACME_USE_WGET'
         nat: |
           "8080": "80"
-        prepare: pkgutil -y -i socat curl wget
-        copyback: false
+        prepare: |
+          pkgutil -U
+          pkgutil -y -i socat curl wget
+        sync: nfs
         run: |
           cd ../acmetest \
           && ./letest.sh
-
+    - name: DebugOnError
+      if: ${{ failure() }}
+      run: |
+        echo "See how to debug in VM:"
+        echo "https://github.com/acmesh-official/acme.sh/wiki/debug-in-VM"
 

.github/workflows/Ubuntu.yml

@@ -37,8 +37,8 @@ jobs:
            TEST_PREFERRED_CHAIN: (STAGING)
            ACME_USE_WGET: 1
          - TEST_ACME_Server: "ZeroSSL.com"
-           CA_ECDSA: "ZeroSSL ECC Domain Secure Site CA"
-           CA: "ZeroSSL RSA Domain Secure Site CA"
+           CA_ECDSA: "ZeroSSL ECC DV SSL CA 2"
+           CA: "ZeroSSL RSA DV SSL CA 2"
            CA_EMAIL: "githubtest@acme.sh"
            TEST_PREFERRED_CHAIN: ""
          - TEST_ACME_Server: "https://localhost:9000/acme/acme/directory"
@@ -70,7 +70,7 @@ jobs:
       TestingDomain: ${{ matrix.TestingDomain }}
       ACME_USE_WGET: ${{ matrix.ACME_USE_WGET }}
     steps:
-    - uses: actions/checkout@v4
+    - uses: actions/checkout@v6
     - name: Install tools
       run: sudo apt-get install -y socat wget
     - name: Start StepCA

.github/workflows/Windows.yml

@@ -31,8 +31,8 @@ jobs:
            CA_EMAIL: ""
            TEST_PREFERRED_CHAIN: (STAGING)
          #- TEST_ACME_Server: "ZeroSSL.com"
-         #  CA_ECDSA: "ZeroSSL ECC Domain Secure Site CA"
-         #  CA: "ZeroSSL RSA Domain Secure Site CA"
+         #  CA_ECDSA: "ZeroSSL ECC DV SSL CA 2"
+         #  CA: "ZeroSSL RSA DV SSL CA 2"
          #  CA_EMAIL: "githubtest@acme.sh"
          #  TEST_PREFERRED_CHAIN: ""
     runs-on: windows-latest
@@ -49,7 +49,7 @@ jobs:
     - name: Set git to use LF
       run: |
           git config --global core.autocrlf false
-    - uses: actions/checkout@v4
+    - uses: actions/checkout@v6
     - name: Install cygwin base packages with chocolatey
       run: |
           choco config get cacheLocation
@@ -67,6 +67,13 @@ jobs:
       shell: cmd
       run: |
           echo "PATH=%PATH%"
+    - uses: anyvm-org/cf-tunnel@v0
+      id: tunnel
+      with:
+        protocol: http
+        port: 80
+    - name: Set envs
+      run: echo "TestingDomain=${{steps.tunnel.outputs.server}}" >> $GITHUB_ENV
     - name: Clone acmetest
       shell: cmd
       run: cd .. && git clone --depth=1 https://github.com/acmesh-official/acmetest.git  && cp -r acme.sh acmetest/

.github/workflows/dockerhub.yml

@@ -43,14 +43,14 @@ jobs:
     if: "contains(needs.CheckToken.outputs.hasToken, 'true')"
     steps:
       - name: checkout code
-        uses: actions/checkout@v4
+        uses: actions/checkout@v6
         with:
           persist-credentials: false
       - name: Set up QEMU
         uses: docker/setup-qemu-action@v2
       - name: Extract Docker metadata
         id: meta
-        uses: docker/metadata-action@v5.5.1
+        uses: docker/metadata-action@v6
         with:
           images: ${DOCKER_IMAGE}
       - name: Set up Docker Buildx

.github/workflows/pr_dns.yml

@@ -11,6 +11,7 @@ on:
 jobs:
   welcome:
     runs-on: ubuntu-latest
+    if: github.actor != 'neilpang'
     steps:
       - uses: actions/github-script@v6
         with:
@@ -20,12 +21,14 @@ jobs:
               owner: context.repo.owner,
               repo: context.repo.repo,
               body: `**Welcome**
-                First thing: don't send PR to the master branch, please send to the dev branch instead.
-                Please make sure you've read our [DNS API Dev Guide](../wiki/DNS-API-Dev-Guide) and [DNS-API-Test](../wiki/DNS-API-Test).
-                Then reply on this message, otherwise, your code will not be reviewed or merged.
-                Please also make sure to add/update the usage here: https://github.com/acmesh-official/acme.sh/wiki/dnsapi2
-                We look forward to reviewing your Pull request shortly ✨
-                注意: 必须通过了 [DNS-API-Test](../wiki/DNS-API-Test) 才会被 review. 无论是修改, 还是新加的 dns api, 都必须确保通过这个测试.
+                    READ ME !!!!!
+                    Read me !!!!!!
+                    First thing: don't send PR to the master branch, please send to the dev branch instead.
+                    Please read the [DNS API Dev Guide](../wiki/DNS-API-Dev-Guide).
+                    You MUST pass the [DNS-API-Test](../wiki/DNS-API-Test).
+                    Then reply on this message, otherwise, your code will not be reviewed or merged.
+                    Please also make sure to add/update the usage here: https://github.com/acmesh-official/acme.sh/wiki/dnsapi2
+                    注意: 必须通过了 [DNS-API-Test](../wiki/DNS-API-Test) 才会被 review. 无论是修改, 还是新加的 dns api, 都必须确保通过这个测试.
                 `
             })
 

.github/workflows/pr_notify.yml

@@ -13,6 +13,7 @@ on:
 jobs:
   welcome:
     runs-on: ubuntu-latest
+    if: github.actor != 'neilpang'
     steps:
       - uses: actions/github-script@v6
         with:

.github/workflows/shellcheck.yml

@@ -22,7 +22,7 @@ jobs:
   ShellCheck:
     runs-on: ubuntu-latest
     steps:
-    - uses: actions/checkout@v4
+    - uses: actions/checkout@v6
     - name: Install Shellcheck
       run: sudo apt-get install -y shellcheck
     - name: DoShellcheck
@@ -31,7 +31,7 @@ jobs:
   shfmt:
     runs-on: ubuntu-latest
     steps:
-    - uses: actions/checkout@v4
+    - uses: actions/checkout@v6
     - name: Install shfmt
       run: curl -sSL https://github.com/mvdan/sh/releases/download/v3.1.2/shfmt_v3.1.2_linux_amd64 -o ~/shfmt && chmod +x ~/shfmt
     - name: shfmt

.github/workflows/wiki-monitor.yml

@@ -0,0 +1,66 @@
+name: Notify via Issue on Wiki Edit
+
+on:
+  gollum:
+
+jobs:
+  notify:
+    runs-on: ubuntu-latest
+    if: github.actor != 'neilpang'
+    steps:
+      - name: Checkout wiki repository
+        uses: actions/checkout@v6
+        with:
+          repository: ${{ github.repository }}.wiki
+          path: wiki
+          fetch-depth: 0
+
+      - name: Generate wiki change message
+        run: |
+            actor="${{ github.actor }}"
+            sender_url=$(jq -r '.sender.html_url' "$GITHUB_EVENT_PATH")
+            page_name=$(jq -r '.pages[0].page_name' "$GITHUB_EVENT_PATH")
+            page_sha=$(jq -r '.pages[0].sha' "$GITHUB_EVENT_PATH")
+            page_url=$(jq -r '.pages[0].html_url' "$GITHUB_EVENT_PATH")
+            page_action=$(jq -r '.pages[0].action' "$GITHUB_EVENT_PATH")
+            page_summary=$(jq -r '.pages[0].summary' "$GITHUB_EVENT_PATH")
+            now="$(date '+%Y-%m-%d %H:%M:%S')"
+
+            cd wiki
+            prev_sha=$(git rev-list $page_sha^ -- "$page_name.md" | head -n 1)
+            if [ -n "$prev_sha" ]; then
+                git diff $prev_sha $page_sha -- "$page_name.md" > ../wiki.diff || echo "(No diff found)" > ../wiki.diff
+            else
+                echo "(no diff)" > ../wiki.diff
+            fi
+            cd ..
+            {
+            echo "Wiki edited"
+            echo -n "User: "
+            echo "@$actor [$actor]($sender_url)"
+            echo "Time: $now"
+            echo "Page: [$page_name]($page_url) (Action: $page_action)"
+            echo "Comment: $page_summary"
+            echo "[Click here to Revert](${page_url}/_history)"
+            echo ""
+            echo "----"
+            echo "###  diff："
+            echo '```diff'
+            cat wiki.diff
+            echo '```'
+            } > wiki-change-msg.txt
+
+      - name: Create issue to notify Neilpang
+        uses: peter-evans/create-issue-from-file@v5
+        with:
+          title: "Wiki edited"
+          content-filepath: ./wiki-change-msg.txt
+          assignees: Neilpang
+        env:
+          TZ: Asia/Shanghai
+
+
+
+
+
+

Dockerfile

@@ -1,4 +1,4 @@
-FROM alpine:3.21
+FROM alpine:3.23
 
 RUN apk --no-cache add -f \
   openssl \
@@ -13,10 +13,15 @@ RUN apk --no-cache add -f \
   tar \
   libidn \
   jq \
-  cronie
+  yq-go \
+  supercronic
+
+ENV LE_WORKING_DIR=/acmebin
 
 ENV LE_CONFIG_HOME=/acme.sh
 
+ENV HOME=/acme.sh
+
 ARG AUTO_UPGRADE=1
 
 ENV AUTO_UPGRADE=$AUTO_UPGRADE
@@ -27,10 +32,13 @@ COPY ./deploy /install_acme.sh/deploy
 COPY ./dnsapi /install_acme.sh/dnsapi
 COPY ./notify /install_acme.sh/notify
 
+RUN addgroup -g 1000 acme && adduser -h $LE_CONFIG_HOME -s /bin/sh -G acme -D -H -u 1000 acme
+
 RUN cd /install_acme.sh && ([ -f /install_acme.sh/acme.sh ] && /install_acme.sh/acme.sh --install || curl https://get.acme.sh | sh) && rm -rf /install_acme.sh/
 
+RUN ln -s $LE_WORKING_DIR/acme.sh /usr/local/bin/acme.sh
 
-RUN ln -s /root/.acme.sh/acme.sh /usr/local/bin/acme.sh && crontab -l | grep acme.sh | sed 's#> /dev/null#> /proc/1/fd/1 2>/proc/1/fd/2#' | crontab -
+RUN chown -R acme:acme $LE_CONFIG_HOME
 
 RUN for verb in help \
   version \
@@ -64,15 +72,23 @@ RUN for verb in help \
   set-default-ca \
   set-default-chain \
   ; do \
-    printf -- "%b" "#!/usr/bin/env sh\n/root/.acme.sh/acme.sh --${verb} --config-home /acme.sh \"\$@\"" >/usr/local/bin/--${verb} && chmod +x /usr/local/bin/--${verb} \
+    printf -- "%b" "#!/usr/bin/env sh\n$LE_WORKING_DIR/acme.sh --${verb} --config-home $LE_CONFIG_HOME \"\$@\"" >/usr/local/bin/--${verb} && chmod +x /usr/local/bin/--${verb} \
   ; done
 
 RUN printf "%b" '#!'"/usr/bin/env sh\n \
 if [ \"\$1\" = \"daemon\" ];  then \n \
- exec crond -n -s -m off \n \
+  if [ ! -f \"\$LE_CONFIG_HOME/crontab\" ]; then \n \
+     echo \"\$LE_CONFIG_HOME/crontab not found, generating one\" \n \
+     time=\$(date -u \"+%s\") \n \
+     random_minute=\$((\$time % 60)) \n \
+     random_hour=\$((\$time / 60 % 24)) \n \
+     echo \"\$random_minute \$random_hour * * * \\\"\$LE_WORKING_DIR\\\"/acme.sh --cron --home \\\"\$LE_WORKING_DIR\\\" --config-home \\\"\$LE_CONFIG_HOME\\\"\" > \"\$LE_CONFIG_HOME\"/crontab \n \
+  fi \n \
+  echo \"Running Supercronic using crontab at \$LE_CONFIG_HOME/crontab\" \n \
+  exec -- /usr/bin/supercronic \"\$LE_CONFIG_HOME/crontab\" \n \
 else \n \
  exec -- \"\$@\"\n \
-fi\n" >/entry.sh && chmod +x /entry.sh
+fi\n" >/entry.sh && chmod +x /entry.sh && chmod -R o+rwx $LE_WORKING_DIR && chmod -R o+rwx $LE_CONFIG_HOME
 
 VOLUME /acme.sh
 

README.md

@@ -1,52 +1,73 @@
-# An ACME Shell script: acme.sh 
+<p align="center">
+  <a href="https://zerossl.com/?fromacme.sh">
+    <img src="https://github.com/user-attachments/assets/7531085e-399b-4ac2-82a2-90d14a0b7f05" alt="zerossl.com">
+  </a>
+</p>
 
-[![FreeBSD](https://github.com/acmesh-official/acme.sh/actions/workflows/FreeBSD.yml/badge.svg)](https://github.com/acmesh-official/acme.sh/actions/workflows/FreeBSD.yml)
-[![OpenBSD](https://github.com/acmesh-official/acme.sh/actions/workflows/OpenBSD.yml/badge.svg)](https://github.com/acmesh-official/acme.sh/actions/workflows/OpenBSD.yml)
-[![NetBSD](https://github.com/acmesh-official/acme.sh/actions/workflows/NetBSD.yml/badge.svg)](https://github.com/acmesh-official/acme.sh/actions/workflows/NetBSD.yml)
-[![MacOS](https://github.com/acmesh-official/acme.sh/actions/workflows/MacOS.yml/badge.svg)](https://github.com/acmesh-official/acme.sh/actions/workflows/MacOS.yml)
-[![Ubuntu](https://github.com/acmesh-official/acme.sh/actions/workflows/Ubuntu.yml/badge.svg)](https://github.com/acmesh-official/acme.sh/actions/workflows/Ubuntu.yml)
-[![Windows](https://github.com/acmesh-official/acme.sh/actions/workflows/Windows.yml/badge.svg)](https://github.com/acmesh-official/acme.sh/actions/workflows/Windows.yml)
-[![Solaris](https://github.com/acmesh-official/acme.sh/actions/workflows/Solaris.yml/badge.svg)](https://github.com/acmesh-official/acme.sh/actions/workflows/Solaris.yml)
-[![DragonFlyBSD](https://github.com/acmesh-official/acme.sh/actions/workflows/DragonFlyBSD.yml/badge.svg)](https://github.com/acmesh-official/acme.sh/actions/workflows/DragonFlyBSD.yml)
-[![Omnios](https://github.com/acmesh-official/acme.sh/actions/workflows/Omnios.yml/badge.svg)](https://github.com/acmesh-official/acme.sh/actions/workflows/Omnios.yml)
+<h1 align="center">🔐 acme.sh</h1>
+<h3 align="center">An ACME Protocol Client Written Purely in Shell</h3>
 
-![Shellcheck](https://github.com/acmesh-official/acme.sh/workflows/Shellcheck/badge.svg)
-![PebbleStrict](https://github.com/acmesh-official/acme.sh/workflows/PebbleStrict/badge.svg)
-![DockerHub](https://github.com/acmesh-official/acme.sh/workflows/Build%20DockerHub/badge.svg)
+<p align="center">
+  <a href="https://github.com/acmesh-official/acme.sh/actions/workflows/FreeBSD.yml"><img src="https://github.com/acmesh-official/acme.sh/actions/workflows/FreeBSD.yml/badge.svg" alt="FreeBSD"></a>
+  <a href="https://github.com/acmesh-official/acme.sh/actions/workflows/OpenBSD.yml"><img src="https://github.com/acmesh-official/acme.sh/actions/workflows/OpenBSD.yml/badge.svg" alt="OpenBSD"></a>
+  <a href="https://github.com/acmesh-official/acme.sh/actions/workflows/NetBSD.yml"><img src="https://github.com/acmesh-official/acme.sh/actions/workflows/NetBSD.yml/badge.svg" alt="NetBSD"></a>
+  <a href="https://github.com/acmesh-official/acme.sh/actions/workflows/MacOS.yml"><img src="https://github.com/acmesh-official/acme.sh/actions/workflows/MacOS.yml/badge.svg" alt="MacOS"></a>
+  <a href="https://github.com/acmesh-official/acme.sh/actions/workflows/Ubuntu.yml"><img src="https://github.com/acmesh-official/acme.sh/actions/workflows/Ubuntu.yml/badge.svg" alt="Ubuntu"></a>
+  <a href="https://github.com/acmesh-official/acme.sh/actions/workflows/Windows.yml"><img src="https://github.com/acmesh-official/acme.sh/actions/workflows/Windows.yml/badge.svg" alt="Windows"></a>
+  <a href="https://github.com/acmesh-official/acme.sh/actions/workflows/Solaris.yml"><img src="https://github.com/acmesh-official/acme.sh/actions/workflows/Solaris.yml/badge.svg" alt="Solaris"></a>
+  <a href="https://github.com/acmesh-official/acme.sh/actions/workflows/DragonFlyBSD.yml"><img src="https://github.com/acmesh-official/acme.sh/actions/workflows/DragonFlyBSD.yml/badge.svg" alt="DragonFlyBSD"></a>
+  <a href="https://github.com/acmesh-official/acme.sh/actions/workflows/MidnightBSD.yml"><img src="https://github.com/acmesh-official/acme.sh/actions/workflows/MidnightBSD.yml/badge.svg" alt="MidnightBSD"></a>
+  <a href="https://github.com/acmesh-official/acme.sh/actions/workflows/Omnios.yml"><img src="https://github.com/acmesh-official/acme.sh/actions/workflows/Omnios.yml/badge.svg" alt="Omnios"></a>
+  <a href="https://github.com/acmesh-official/acme.sh/actions/workflows/OpenIndiana.yml"><img src="https://github.com/acmesh-official/acme.sh/actions/workflows/OpenIndiana.yml/badge.svg" alt="OpenIndiana"></a>
+  <a href="https://github.com/acmesh-official/acme.sh/actions/workflows/Haiku.yml"><img src="https://github.com/acmesh-official/acme.sh/actions/workflows/Haiku.yml/badge.svg" alt="Haiku"></a>
+</p>
+
+<p align="center">
+  <img src="https://github.com/acmesh-official/acme.sh/workflows/Shellcheck/badge.svg" alt="Shellcheck">
+  <img src="https://github.com/acmesh-official/acme.sh/workflows/PebbleStrict/badge.svg" alt="PebbleStrict">
+  <img src="https://github.com/acmesh-official/acme.sh/workflows/Build%20DockerHub/badge.svg" alt="DockerHub">
+</p>
+
+<p align="center">
+  <a href="https://opencollective.com/acmesh"><img src="https://opencollective.com/acmesh/all/badge.svg?label=financial+contributors" alt="Financial Contributors on Open Collective"></a>
+  <a href="https://gitter.im/acme-sh/Lobby?utm_source=badge&utm_medium=badge&utm_campaign=pr-badge&utm_content=badge"><img src="https://badges.gitter.im/acme-sh/Lobby.svg" alt="Join the chat at Gitter"></a>
+  <a href="https://hub.docker.com/r/neilpang/acme.sh" title="Click to view the image on Docker Hub"><img src="https://img.shields.io/docker/stars/neilpang/acme.sh.svg" alt="Docker stars"></a>
+  <a href="https://hub.docker.com/r/neilpang/acme.sh" title="Click to view the image on Docker Hub"><img src="https://img.shields.io/docker/pulls/neilpang/acme.sh.svg" alt="Docker pulls"></a>
+</p>
 
 
-<a href="https://opencollective.com/acmesh" alt="Financial Contributors on Open Collective"><img src="https://opencollective.com/acmesh/all/badge.svg?label=financial+contributors" /></a> 
-[![Join the chat at https://gitter.im/acme-sh/Lobby](https://badges.gitter.im/acme-sh/Lobby.svg)](https://gitter.im/acme-sh/Lobby?utm_source=badge&utm_medium=badge&utm_campaign=pr-badge&utm_content=badge)
-[![Docker stars](https://img.shields.io/docker/stars/neilpang/acme.sh.svg)](https://hub.docker.com/r/neilpang/acme.sh "Click to view the image on Docker Hub")
-[![Docker pulls](https://img.shields.io/docker/pulls/neilpang/acme.sh.svg)](https://hub.docker.com/r/neilpang/acme.sh "Click to view the image on Docker Hub")
+---
 
+## ✨ Features
 
+- 🐚 An ACME protocol client written **purely in Shell** (Unix shell) language
+- 📜 Full ACME protocol implementation
+- 🔑 Support **ECDSA** certificates
+- 🌐 Support **SAN** and **wildcard** certificates
+- ⚡ Simple, powerful and very easy to use — only **3 minutes** to learn!
+- 🔧 Compatible with **Bash**, **dash** and **sh**
+- 🚫 No dependencies on Python
+- 🔄 One script to issue, renew and install your certificates automatically
+- 👤 **DOES NOT** require `root/sudoer` access
+- 🐳 Docker ready
+- 🌍 IPv6 ready
+- 📧 Cron job notifications for renewal or error
 
-- An ACME protocol client written purely in Shell (Unix shell) language.
-- Full ACME protocol implementation.
-- Support ECDSA certs
-- Support SAN and wildcard certs
-- Simple, powerful and very easy to use. You only need 3 minutes to learn it.
-- Bash, dash and sh compatible.
-- Purely written in Shell with no dependencies on python.
-- Just one script to issue, renew and install your certificates automatically.
-- DOES NOT require `root/sudoer` access.
-- Docker ready
-- IPv6 ready
-- Cron job notifications for renewal or error etc.
+> 💡 It's probably the **easiest & smartest** shell script to automatically issue & renew free certificates.
 
-It's probably the `easiest & smartest` shell script to automatically issue & renew the free certificates.
+<p align="center">
+  <a href="https://github.com/acmesh-official/acme.sh/wiki"><strong>📚 Wiki</strong></a> •
+  <a href="https://github.com/acmesh-official/acme.sh/wiki/Run-acme.sh-in-docker"><strong>🐳 Docker Guide</strong></a> •
+  <a href="https://twitter.com/neilpangxa"><strong>🐦 Twitter</strong></a>
+</p>
 
-Wiki: https://github.com/acmesh-official/acme.sh/wiki
+---
 
-For Docker Fans: [acme.sh :two_hearts: Docker ](https://github.com/acmesh-official/acme.sh/wiki/Run-acme.sh-in-docker)
+## 🌏 [中文说明](https://github.com/acmesh-official/acme.sh/wiki/%E8%AF%B4%E6%98%8E)
 
-Twitter: [@neilpangxa](https://twitter.com/neilpangxa)
+---
 
-
-# [中文说明](https://github.com/acmesh-official/acme.sh/wiki/%E8%AF%B4%E6%98%8E)
-
-# Who:
+## 🏆 Who Uses acme.sh?
 - [FreeBSD.org](https://blog.crashed.org/letsencrypt-in-freebsd-org/)
 - [ruby-china.org](https://ruby-china.org/topics/31983)
 - [Proxmox](https://pve.proxmox.com/wiki/Certificate_Management)
@@ -60,7 +81,9 @@ Twitter: [@neilpangxa](https://twitter.com/neilpangxa)
 - [lnmp.org](https://lnmp.org/)
 - [more...](https://github.com/acmesh-official/acme.sh/wiki/Blogs-and-tutorials)
 
-# Tested OS
+---
+
+## 🖥️ Tested OS
 
 | NO | Status| Platform|
 |----|-------|---------|
@@ -73,67 +96,78 @@ Twitter: [@neilpangxa](https://twitter.com/neilpangxa)
 |7|[![OpenBSD](https://github.com/acmesh-official/acme.sh/actions/workflows/OpenBSD.yml/badge.svg)](https://github.com/acmesh-official/acme.sh/actions/workflows/OpenBSD.yml)|OpenBSD
 |8|[![NetBSD](https://github.com/acmesh-official/acme.sh/actions/workflows/NetBSD.yml/badge.svg)](https://github.com/acmesh-official/acme.sh/actions/workflows/NetBSD.yml)|NetBSD
 |9|[![DragonFlyBSD](https://github.com/acmesh-official/acme.sh/actions/workflows/DragonFlyBSD.yml/badge.svg)](https://github.com/acmesh-official/acme.sh/actions/workflows/DragonFlyBSD.yml)|DragonFlyBSD
-|10|[![Omnios](https://github.com/acmesh-official/acme.sh/actions/workflows/Omnios.yml/badge.svg)](https://github.com/acmesh-official/acme.sh/actions/workflows/Omnios.yml)|Omnios
-|11|[![Linux](https://github.com/acmesh-official/acme.sh/actions/workflows/Linux.yml/badge.svg)](https://github.com/acmesh-official/acme.sh/actions/workflows/Linux.yml)| Debian
-|12|[![Linux](https://github.com/acmesh-official/acme.sh/actions/workflows/Linux.yml/badge.svg)](https://github.com/acmesh-official/acme.sh/actions/workflows/Linux.yml)|CentOS
-|13|[![Linux](https://github.com/acmesh-official/acme.sh/actions/workflows/Linux.yml/badge.svg)](https://github.com/acmesh-official/acme.sh/actions/workflows/Linux.yml)|openSUSE
-|14|[![Linux](https://github.com/acmesh-official/acme.sh/actions/workflows/Linux.yml/badge.svg)](https://github.com/acmesh-official/acme.sh/actions/workflows/Linux.yml)|Alpine Linux (with curl)
-|15|[![Linux](https://github.com/acmesh-official/acme.sh/actions/workflows/Linux.yml/badge.svg)](https://github.com/acmesh-official/acme.sh/actions/workflows/Linux.yml)|Archlinux
-|16|[![Linux](https://github.com/acmesh-official/acme.sh/actions/workflows/Linux.yml/badge.svg)](https://github.com/acmesh-official/acme.sh/actions/workflows/Linux.yml)|fedora
-|17|[![Linux](https://github.com/acmesh-official/acme.sh/actions/workflows/Linux.yml/badge.svg)](https://github.com/acmesh-official/acme.sh/actions/workflows/Linux.yml)|Kali Linux
-|18|[![Linux](https://github.com/acmesh-official/acme.sh/actions/workflows/Linux.yml/badge.svg)](https://github.com/acmesh-official/acme.sh/actions/workflows/Linux.yml)|Oracle Linux
-|19|[![Linux](https://github.com/acmesh-official/acme.sh/actions/workflows/Linux.yml/badge.svg)](https://github.com/acmesh-official/acme.sh/actions/workflows/Linux.yml)|Mageia
-|10|[![Linux](https://github.com/acmesh-official/acme.sh/actions/workflows/Linux.yml/badge.svg)](https://github.com/acmesh-official/acme.sh/actions/workflows/Linux.yml)|Gentoo Linux
-|11|[![Linux](https://github.com/acmesh-official/acme.sh/actions/workflows/Linux.yml/badge.svg)](https://github.com/acmesh-official/acme.sh/actions/workflows/Linux.yml)|ClearLinux
+|10|[![MidnightBSD](https://github.com/acmesh-official/acme.sh/actions/workflows/MidnightBSD.yml/badge.svg)](https://github.com/acmesh-official/acme.sh/actions/workflows/MidnightBSD.yml)|MidnightBSD
+|11|[![Omnios](https://github.com/acmesh-official/acme.sh/actions/workflows/Omnios.yml/badge.svg)](https://github.com/acmesh-official/acme.sh/actions/workflows/Omnios.yml)|Omnios
+|12|[![OpenIndiana](https://github.com/acmesh-official/acme.sh/actions/workflows/OpenIndiana.yml/badge.svg)](https://github.com/acmesh-official/acme.sh/actions/workflows/OpenIndiana.yml)|OpenIndiana
+|13|[![Linux](https://github.com/acmesh-official/acme.sh/actions/workflows/Linux.yml/badge.svg)](https://github.com/acmesh-official/acme.sh/actions/workflows/Linux.yml)| Debian
+|14|[![Linux](https://github.com/acmesh-official/acme.sh/actions/workflows/Linux.yml/badge.svg)](https://github.com/acmesh-official/acme.sh/actions/workflows/Linux.yml)|openSUSE
+|15|[![Linux](https://github.com/acmesh-official/acme.sh/actions/workflows/Linux.yml/badge.svg)](https://github.com/acmesh-official/acme.sh/actions/workflows/Linux.yml)|Alpine Linux (with curl)
+|16|[![Linux](https://github.com/acmesh-official/acme.sh/actions/workflows/Linux.yml/badge.svg)](https://github.com/acmesh-official/acme.sh/actions/workflows/Linux.yml)|Archlinux
+|17|[![Linux](https://github.com/acmesh-official/acme.sh/actions/workflows/Linux.yml/badge.svg)](https://github.com/acmesh-official/acme.sh/actions/workflows/Linux.yml)|fedora
+|18|[![Linux](https://github.com/acmesh-official/acme.sh/actions/workflows/Linux.yml/badge.svg)](https://github.com/acmesh-official/acme.sh/actions/workflows/Linux.yml)|Kali Linux
+|19|[![Linux](https://github.com/acmesh-official/acme.sh/actions/workflows/Linux.yml/badge.svg)](https://github.com/acmesh-official/acme.sh/actions/workflows/Linux.yml)|Oracle Linux
+|20|[![Linux](https://github.com/acmesh-official/acme.sh/actions/workflows/Linux.yml/badge.svg)](https://github.com/acmesh-official/acme.sh/actions/workflows/Linux.yml)|Mageia
+|21|[![Linux](https://github.com/acmesh-official/acme.sh/actions/workflows/Linux.yml/badge.svg)](https://github.com/acmesh-official/acme.sh/actions/workflows/Linux.yml)|Gentoo Linux
 |22|-----| Cloud Linux  https://github.com/acmesh-official/acme.sh/issues/111
 |23|-----| OpenWRT: Tested and working. See [wiki page](https://github.com/acmesh-official/acme.sh/wiki/How-to-run-on-OpenWRT)
 |24|[![](https://acmesh-official.github.io/acmetest/status/proxmox.svg)](https://github.com/acmesh-official/letest#here-are-the-latest-status)| Proxmox: See Proxmox VE Wiki. Version [4.x, 5.0, 5.1](https://pve.proxmox.com/wiki/HTTPS_Certificate_Configuration_(Version_4.x,_5.0_and_5.1)#Let.27s_Encrypt_using_acme.sh), version [5.2 and up](https://pve.proxmox.com/wiki/Certificate_Management)
+|25|[![Haiku](https://github.com/acmesh-official/acme.sh/actions/workflows/Haiku.yml/badge.svg)](https://github.com/acmesh-official/acme.sh/actions/workflows/Haiku.yml)|Haiku OS
 
 
-Check our [testing project](https://github.com/acmesh-official/acmetest):
+> 🧪 Check our [testing project](https://github.com/acmesh-official/acmetest)
+>
+> 🖥️ The testing VMs are supported by [vmactions.org](https://vmactions.org)
 
-https://github.com/acmesh-official/acmetest
+---
 
-# Supported CA
+## 🏛️ Supported CA
 
-- [ZeroSSL.com CA](https://github.com/acmesh-official/acme.sh/wiki/ZeroSSL.com-CA)(default)
-- Letsencrypt.org CA
-- [BuyPass.com CA](https://github.com/acmesh-official/acme.sh/wiki/BuyPass.com-CA)
-- [SSL.com CA](https://github.com/acmesh-official/acme.sh/wiki/SSL.com-CA)
-- [Google.com Public CA](https://github.com/acmesh-official/acme.sh/wiki/Google-Public-CA)
-- [Pebble strict Mode](https://github.com/letsencrypt/pebble)
-- Any other [RFC8555](https://tools.ietf.org/html/rfc8555)-compliant CA
+| CA | Status |
+|---|---|
+| [ZeroSSL.com CA](https://github.com/acmesh-official/acme.sh/wiki/ZeroSSL.com-CA) | ⭐ **Default** |
+| Letsencrypt.org CA | ✅ Supported |
+| [SSL.com CA](https://github.com/acmesh-official/acme.sh/wiki/SSL.com-CA) | ✅ Supported |
+| [Google.com Public CA](https://github.com/acmesh-official/acme.sh/wiki/Google-Public-CA) | ✅ Supported |
+| [Actalis.com CA](https://github.com/acmesh-official/acme.sh/wiki/Actalis.com-CA) | ✅ Supported |
+| [Pebble strict Mode](https://github.com/letsencrypt/pebble) | ✅ Supported |
+| Any [RFC8555](https://tools.ietf.org/html/rfc8555)-compliant CA | ✅ Supported |
 
-# Supported modes
+---
 
-- Webroot mode
-- Standalone mode
-- Standalone tls-alpn mode
-- Apache mode
-- Nginx mode
-- DNS mode
-- [DNS alias mode](https://github.com/acmesh-official/acme.sh/wiki/DNS-alias-mode)
-- [Stateless mode](https://github.com/acmesh-official/acme.sh/wiki/Stateless-Mode)
+## ⚙️ Supported Modes
 
+| Mode | Description |
+|------|-------------|
+| 📁 Webroot mode | Use existing webroot directory |
+| 🖥️ Standalone mode | Built-in webserver on port 80 |
+| 🔐 Standalone tls-alpn mode | Built-in webserver on port 443 |
+| 🪶 Apache mode | Use Apache for verification |
+| ⚡ Nginx mode | Use Nginx for verification |
+| 🌐 DNS mode | Use DNS TXT records |
+| 🔗 [DNS alias mode](https://github.com/acmesh-official/acme.sh/wiki/DNS-alias-mode) | Use DNS alias for verification |
+| 📡 [Stateless mode](https://github.com/acmesh-official/acme.sh/wiki/Stateless-Mode) | Stateless verification |
 
-# 1. How to install
+---
 
-### 1. Install online
+## 📖 Usage Guide
 
-Check this project: https://github.com/acmesh-official/get.acme.sh
+### 1️⃣ How to Install
+
+#### 📥 Install Online
+
+> Check this project: https://github.com/acmesh-official/get.acme.sh
 
 ```bash
 curl https://get.acme.sh | sh -s email=my@example.com
 ```
 
-Or:
+**Or:**
 
 ```bash
 wget -O -  https://get.acme.sh | sh -s email=my@example.com
 ```
 
-
-### 2. Or, Install from git
+#### 📦 Install from Git
 
 Clone this project and launch installation:
 
@@ -143,11 +177,11 @@ cd ./acme.sh
 ./acme.sh --install -m my@example.com
 ```
 
-You `don't have to be root` then, although `it is recommended`.
+> 💡 You `don't have to be root` then, although `it is recommended`.
 
-Advanced Installation: https://github.com/acmesh-official/acme.sh/wiki/How-to-install
+📚 **Advanced Installation:** https://github.com/acmesh-official/acme.sh/wiki/How-to-install
 
-The installer will perform 3 actions:
+**The installer will perform 3 actions:**
 
 1. Create and copy `acme.sh` to your home dir (`$HOME`): `~/.acme.sh/`.
 All certs will be placed in this folder too.
@@ -160,17 +194,19 @@ Cron entry example:
 0 0 * * * "/home/user/.acme.sh"/acme.sh --cron --home "/home/user/.acme.sh" > /dev/null
 ```
 
-After the installation, you must close the current terminal and reopen it to make the alias take effect.
+> ⚠️ After the installation, you must close the current terminal and reopen it to make the alias take effect.
 
-Ok, you are ready to issue certs now.
+✅ **You are ready to issue certs now!**
 
-Show help message:
+**Show help message:**
 
 ```sh
-root@v1:~# acme.sh -h
+acme.sh -h
 ```
 
-# 2. Just issue a cert
+---
+
+### 2️⃣ Issue a Certificate
 
 **Example 1:** Single domain.
 
@@ -205,17 +241,21 @@ You must point and bind all the domains to the same webroot dir: `/home/wwwroot/
 
 The certs will be placed in `~/.acme.sh/example.com/`
 
-The certs will be renewed automatically every **60** days.
+> 🔄 The certs will be renewed automatically every **30** days.
 
-More examples: https://github.com/acmesh-official/acme.sh/wiki/How-to-issue-a-cert
+> 🔐 The certs will default to **ECC** certificates.
 
+📚 **More examples:** https://github.com/acmesh-official/acme.sh/wiki/How-to-issue-a-cert
 
-# 3. Install the cert to Apache/Nginx etc.
+---
+
+### 3️⃣ Install the Certificate to Apache/Nginx
 
 After the cert is generated, you probably want to install/copy the cert to your Apache/Nginx or other servers.
-You **MUST** use this command to copy the certs to the target files, **DO NOT** use the certs files in **~/.acme.sh/** folder, they are for internal use only, the folder structure may change in the future.
 
-**Apache** example:
+> ⚠️ **IMPORTANT:** You **MUST** use this command to copy the certs to the target files. **DO NOT** use the certs files in `~/.acme.sh/` folder — they are for internal use only, the folder structure may change in the future.
+
+#### 🪶 Apache Example:
 ```bash
 acme.sh --install-cert -d example.com \
 --cert-file      /path/to/certfile/in/apache/cert.pem  \
@@ -224,7 +264,7 @@ acme.sh --install-cert -d example.com \
 --reloadcmd     "service apache2 force-reload"
 ```
 
-**Nginx** example:
+#### ⚡ Nginx Example:
 ```bash
 acme.sh --install-cert -d example.com \
 --key-file       /path/to/keyfile/in/nginx/key.pem  \
@@ -238,91 +278,89 @@ The ownership and permission info of existing files are preserved. You can pre-c
 
 Install/copy the cert/key to the production Apache or Nginx path.
 
-The cert will be renewed every **60** days by default (which is configurable). Once the cert is renewed, the Apache/Nginx service will be reloaded automatically by the command: `service apache2 force-reload` or `service nginx force-reload`.
+> 🔄 The cert will be renewed every **30** days by default (configurable). Once renewed, the Apache/Nginx service will be reloaded automatically.
 
+> ⚠️ **IMPORTANT:** The `reloadcmd` is very important. The cert can be automatically renewed, but without a correct `reloadcmd`, the cert may not be flushed to your server (like nginx or apache), then your website will not be able to show the renewed cert.
 
-**Please take care:  The reloadcmd is very important. The cert can be automatically renewed, but, without a correct 'reloadcmd' the cert may not be flushed to your server(like nginx or apache), then your website will not be able to show renewed cert in 60 days.**
+---
 
-# 4. Use Standalone server to issue cert
+### 4️⃣ Use Standalone Server to Issue Certificate
 
-**(requires you to be root/sudoer or have permission to listen on port 80 (TCP))**
+> 🔐 Requires root/sudoer or permission to listen on port **80** (TCP)
 
-Port `80` (TCP) **MUST** be free to listen on, otherwise you will be prompted to free it and try again.
+> ⚠️ Port `80` (TCP) **MUST** be free to listen on, otherwise you will be prompted to free it and try again.
 
 ```bash
 acme.sh --issue --standalone -d example.com -d www.example.com -d cp.example.com
 ```
 
-More examples: https://github.com/acmesh-official/acme.sh/wiki/How-to-issue-a-cert
+📚 **More examples:** https://github.com/acmesh-official/acme.sh/wiki/How-to-issue-a-cert
 
-# 5. Use Standalone ssl server to issue cert
+---
 
-**(requires you to be root/sudoer or have permission to listen on port 443 (TCP))**
+### 5️⃣ Use Standalone TLS Server to Issue Certificate
 
-Port `443` (TCP) **MUST** be free to listen on, otherwise you will be prompted to free it and try again.
+> 🔐 Requires root/sudoer or permission to listen on port **443** (TCP)
+
+> ⚠️ Port `443` (TCP) **MUST** be free to listen on, otherwise you will be prompted to free it and try again.
 
 ```bash
 acme.sh --issue --alpn -d example.com -d www.example.com -d cp.example.com
 ```
 
-More examples: https://github.com/acmesh-official/acme.sh/wiki/How-to-issue-a-cert
+📚 **More examples:** https://github.com/acmesh-official/acme.sh/wiki/How-to-issue-a-cert
 
+---
 
-# 6. Use Apache mode
+### 6️⃣ Use Apache Mode
 
-**(requires you to be root/sudoer, since it is required to interact with Apache server)**
+> 🔐 Requires root/sudoer to interact with Apache server
 
 If you are running a web server, it is recommended to use the `Webroot mode`.
 
 Particularly, if you are running an Apache server, you can use Apache mode instead. This mode doesn't write any files to your web root folder.
 
-Just set string "apache" as the second argument and it will force use of apache plugin automatically.
-
 ```sh
 acme.sh --issue --apache -d example.com -d www.example.com -d cp.example.com
 ```
 
-**This apache mode is only to issue the cert, it will not change your apache config files.
-You will need to configure your website config files to use the cert by yourself.
-We don't want to mess with your apache server, don't worry.**
+> 💡 **Note:** This Apache mode is only to issue the cert, it will **not** change your Apache config files. You will need to configure your website config files to use the cert by yourself. We don't want to mess with your Apache server, don't worry!
 
-More examples: https://github.com/acmesh-official/acme.sh/wiki/How-to-issue-a-cert
+📚 **More examples:** https://github.com/acmesh-official/acme.sh/wiki/How-to-issue-a-cert
 
-# 7. Use Nginx mode
+---
 
-**(requires you to be root/sudoer, since it is required to interact with Nginx server)**
+### 7️⃣ Use Nginx Mode
+
+> 🔐 Requires root/sudoer to interact with Nginx server
 
 If you are running a web server, it is recommended to use the `Webroot mode`.
 
-Particularly, if you are running an nginx server, you can use nginx mode instead. This mode doesn't write any files to your web root folder.
+Particularly, if you are running an Nginx server, you can use Nginx mode instead. This mode doesn't write any files to your web root folder.
 
-Just set string "nginx" as the second argument.
-
-It will configure nginx server automatically to verify the domain and then restore the nginx config to the original version.
-
-So, the config is not changed.
+It will configure Nginx server automatically to verify the domain and then restore the Nginx config to the original version. So, the config is not changed.
 
 ```sh
 acme.sh --issue --nginx -d example.com -d www.example.com -d cp.example.com
 ```
 
-**This nginx mode is only to issue the cert, it will not change your nginx config files.
-You will need to configure your website config files to use the cert by yourself.
-We don't want to mess with your nginx server, don't worry.**
+> 💡 **Note:** This Nginx mode is only to issue the cert, it will **not** change your Nginx config files. You will need to configure your website config files to use the cert by yourself. We don't want to mess with your Nginx server, don't worry!
 
-More examples: https://github.com/acmesh-official/acme.sh/wiki/How-to-issue-a-cert
+📚 **More examples:** https://github.com/acmesh-official/acme.sh/wiki/How-to-issue-a-cert
 
-# 8. Automatic DNS API integration
+---
+
+### 8️⃣ Automatic DNS API Integration
 
 If your DNS provider supports API access, we can use that API to automatically issue the certs.
 
-You don't have to do anything manually!
+> ✨ **You don't have to do anything manually!**
 
-### Currently acme.sh supports most of the dns providers:
+📚 **Currently acme.sh supports most DNS providers:** https://github.com/acmesh-official/acme.sh/wiki/dnsapi
 
-https://github.com/acmesh-official/acme.sh/wiki/dnsapi
+---
 
-# 9. Use DNS manual mode:
+### 9️⃣ Use DNS Manual Mode
 
 See: https://github.com/acmesh-official/acme.sh/wiki/dns-manual-mode first.
 
@@ -352,70 +390,74 @@ Then just rerun with `renew` argument:
 acme.sh --renew -d example.com
 ```
 
-Ok, it's done.
+✅ **Done!**
 
-**Take care, this is dns manual mode, it can not be renewed automatically. you will have to add a new txt record to your domain by your hand when you renew your cert.**
+> ⚠️ **WARNING:** This is DNS manual mode — it **cannot** be renewed automatically. You will have to add a new TXT record to your domain manually when you renew your cert. **Please use DNS API mode instead.**
 
-**Please use dns api mode instead.**
+---
 
-# 10. Issue ECC certificates
+### 🔟 Issue Certificates of Different Key Types (ECC or RSA)
 
-Just set the `keylength` parameter with a prefix `ec-`.
+Just set the `keylength` to a valid, supported value.
 
-For example:
+**Valid values for the `keylength` parameter:**
 
-### Single domain ECC certificate
+| Key Length | Description |
+|------------|-------------|
+| `ec-256` | prime256v1, "ECDSA P-256" ⭐ **Default** |
+| `ec-384` | secp384r1, "ECDSA P-384" |
+| `ec-521` | secp521r1, "ECDSA P-521" ⚠️ Not supported by Let's Encrypt yet |
+| `2048` | RSA 2048-bit |
+| `3072` | RSA 3072-bit |
+| `4096` | RSA 4096-bit |
+
+**Examples:**
+
+#### Single domain with ECDSA P-384 certificate
 
 ```bash
-acme.sh --issue -w /home/wwwroot/example.com -d example.com --keylength ec-256
+acme.sh --issue -w /home/wwwroot/example.com -d example.com --keylength ec-384
 ```
 
-### SAN multi domain ECC certificate
+#### SAN multi domain with RSA4096 certificate
 
 ```bash
-acme.sh --issue -w /home/wwwroot/example.com -d example.com -d www.example.com --keylength ec-256
+acme.sh --issue -w /home/wwwroot/example.com -d example.com -d www.example.com --keylength 4096
 ```
 
-Please look at the `keylength` parameter above.
+---
 
-Valid values are:
+### 1️⃣1️⃣ Issue Wildcard Certificates
 
-1. **ec-256 (prime256v1, "ECDSA P-256", which is the default key type)**
-2. **ec-384 (secp384r1,  "ECDSA P-384")**
-3. **ec-521 (secp521r1,  "ECDSA P-521", which is not supported by Let's Encrypt yet.)**
-4. **2048   (RSA2048)**
-5. **3072   (RSA3072)**
-6. **4096   (RSA4096)**
-
-
-# 11. Issue Wildcard certificates
-
-It's simple, just give a wildcard domain as the `-d` parameter.
+It's simple! Just give a wildcard domain as the `-d` parameter:
 
 ```sh
-acme.sh  --issue -d example.com  -d '*.example.com'  --dns dns_cf
+acme.sh --issue -d example.com -d '*.example.com' --dns dns_cf
 ```
 
 
 
-# 12. How to renew the certs
+---
 
-No, you don't need to renew the certs manually. All the certs will be renewed automatically every **60** days.
+### 1️⃣2️⃣ How to Renew Certificates
 
-However, you can also force to renew a cert:
+> 🔄 No need to renew manually! All certs will be renewed automatically every **30** days.
+
+However, you can force a renewal:
 
 ```sh
 acme.sh --renew -d example.com --force
 ```
 
-or, for ECC cert:
+**For ECC cert:**
 
 ```sh
 acme.sh --renew -d example.com --force --ecc
 ```
 
+---
 
-# 13. How to stop cert renewal
+### 1️⃣3️⃣ How to Stop Certificate Renewal
 
 To stop renewal of a cert, you can execute the following to remove the cert from the renewal list:
 
@@ -425,73 +467,78 @@ acme.sh --remove -d example.com [--ecc]
 
 The cert/key file is not removed from the disk.
 
-You can remove the respective directory (e.g. `~/.acme.sh/example.com`) by yourself.
+> 💡 You can remove the respective directory (e.g. `~/.acme.sh/example.com`) manually.
 
+---
 
-# 14. How to upgrade `acme.sh`
+### 1️⃣4️⃣ How to Upgrade acme.sh
 
-acme.sh is in constant development, so it's strongly recommended to use the latest code.
+> 🚀 acme.sh is in constant development — it's strongly recommended to use the latest code.
 
-You can update acme.sh to the latest code:
+**Update to latest:**
 
 ```sh
 acme.sh --upgrade
 ```
 
-You can also enable auto upgrade:
+**Enable auto upgrade:**
 
 ```sh
 acme.sh --upgrade --auto-upgrade
 ```
 
-Then **acme.sh** will be kept up to date automatically.
-
-Disable auto upgrade:
+**Disable auto upgrade:**
 
 ```sh
 acme.sh --upgrade --auto-upgrade 0
 ```
 
+---
 
-# 15. Issue a cert from an existing CSR
+### 1️⃣5️⃣ Issue a Certificate from an Existing CSR
 
-https://github.com/acmesh-official/acme.sh/wiki/Issue-a-cert-from-existing-CSR
+📚 https://github.com/acmesh-official/acme.sh/wiki/Issue-a-cert-from-existing-CSR
 
+---
 
-# 16. Send notifications in cronjob
+### 1️⃣6️⃣ Send Notifications in Cronjob
 
-https://github.com/acmesh-official/acme.sh/wiki/notify
+📚 https://github.com/acmesh-official/acme.sh/wiki/notify
 
+---
 
-# 17. Under the Hood
+### 1️⃣7️⃣ Under the Hood
 
-Speak ACME language using shell, directly to "Let's Encrypt".
+> 🔧 Speak ACME language using shell, directly to "Let's Encrypt".
 
-TODO:
+---
 
+### 1️⃣8️⃣ Acknowledgments
 
-# 18. Acknowledgments
+| Project | Link |
+|---------|------|
+| 🙏 Acme-tiny | https://github.com/diafygi/acme-tiny |
+| 📜 ACME protocol | https://github.com/ietf-wg-acme/acme |
 
-1. Acme-tiny: https://github.com/diafygi/acme-tiny
-2. ACME protocol: https://github.com/ietf-wg-acme/acme
+---
 
+## 👥 Contributors
 
-## Contributors
-
-### Code Contributors
+### 💻 Code Contributors
 
 This project exists thanks to all the people who contribute.
+
 <a href="https://github.com/acmesh-official/acme.sh/graphs/contributors"><img src="https://opencollective.com/acmesh/contributors.svg?width=890&button=false" /></a>
 
-### Financial Contributors
+### 💰 Financial Contributors
 
 Become a financial contributor and help us sustain our community. [[Contribute](https://opencollective.com/acmesh/contribute)]
 
-#### Individuals
+#### 👤 Individuals
 
 <a href="https://opencollective.com/acmesh"><img src="https://opencollective.com/acmesh/individuals.svg?width=890"></a>
 
-#### Organizations
+#### 🏢 Organizations
 
 Support this project with your organization. Your logo will show up here with a link to your website. [[Contribute](https://opencollective.com/acmesh/contribute)]
 
@@ -506,20 +553,43 @@ Support this project with your organization. Your logo will show up here with a
 <a href="https://opencollective.com/acmesh/organization/8/website"><img src="https://opencollective.com/acmesh/organization/8/avatar.svg"></a>
 <a href="https://opencollective.com/acmesh/organization/9/website"><img src="https://opencollective.com/acmesh/organization/9/avatar.svg"></a>
 
+---
 
+### 1️⃣9️⃣ License & Others
 
-# 19. License & Others
+📄 **License:** GPLv3
 
-License is GPLv3
+⭐ Please **Star** and **Fork** this project!
 
-Please Star and Fork me.
+🐛 [Issues](https://github.com/acmesh-official/acme.sh/issues) and 🔀 [Pull Requests](https://github.com/acmesh-official/acme.sh/pulls) are welcome.
 
-[Issues](https://github.com/acmesh-official/acme.sh/issues) and [pull requests](https://github.com/acmesh-official/acme.sh/pulls) are welcome.
+---
 
+### 2️⃣0️⃣ Donate
 
-# 20. Donate
-Your donation makes **acme.sh** better:
+> 💝 Your donation makes **acme.sh** better!
 
-1. PayPal/Alipay(支付宝)/Wechat(微信): [https://donate.acme.sh/](https://donate.acme.sh/)
+| Method | Link |
+|--------|------|
+| PayPal / Alipay(支付宝) / Wechat(微信) | [https://donate.acme.sh/](https://donate.acme.sh/) |
 
-[Donate List](https://github.com/acmesh-official/acme.sh/wiki/Donate-list)
+📜 [Donate List](https://github.com/acmesh-official/acme.sh/wiki/Donate-list)
+
+---
+
+### 2️⃣1️⃣ About This Repository
+
+> [!NOTE]
+> This repository is officially maintained by <strong>ZeroSSL</strong> as part of our commitment to providing secure and reliable SSL/TLS solutions. We welcome contributions and feedback from the community!  
+> For more information about our services, including free and paid SSL/TLS certificates, visit https://zerossl.com.
+>   
+> All donations made through this repository go directly to the original independent maintainer (Neil Pang), not to ZeroSSL.
+<p align="center">
+	<a href="https://zerossl.com">
+		<picture>
+			<source media="(prefers-color-scheme: dark)" srcset="https://zerossl.com/assets/images/zerossl_logo_white.svg">
+			<source media="(prefers-color-scheme: light)" srcset="https://zerossl.com/assets/images/zerossl_logo.svg">
+			<img src="https://zerossl.com/assets/images/zerossl_logo.svg" alt="ZeroSSL" width="256">
+		</picture>
+	</a>
+</p>

acme.sh

@@ -1,6 +1,6 @@
 #!/usr/bin/env sh
 
-VER=3.1.1
+VER=3.1.3
 
 PROJECT_NAME="acme.sh"
 
@@ -23,9 +23,6 @@ _SUB_FOLDERS="$_SUB_FOLDER_DNSAPI $_SUB_FOLDER_DEPLOY $_SUB_FOLDER_NOTIFY"
 CA_LETSENCRYPT_V2="https://acme-v02.api.letsencrypt.org/directory"
 CA_LETSENCRYPT_V2_TEST="https://acme-staging-v02.api.letsencrypt.org/directory"
 
-CA_BUYPASS="https://api.buypass.com/acme/directory"
-CA_BUYPASS_TEST="https://api.test4.buypass.no/acme/directory"
-
 CA_ZEROSSL="https://acme.zerossl.com/v2/DV90"
 _ZERO_EAB_ENDPOINT="https://api.zerossl.com/acme/eab-credentials-email"
 
@@ -35,6 +32,8 @@ CA_SSLCOM_ECC="https://acme.ssl.com/sslcom-dv-ecc"
 CA_GOOGLE="https://dv.acme-v02.api.pki.goog/directory"
 CA_GOOGLE_TEST="https://dv.acme-v02.test-api.pki.goog/directory"
 
+CA_ACTALIS="https://acme-api.actalis.com/acme/directory"
+
 DEFAULT_CA=$CA_ZEROSSL
 DEFAULT_STAGING_CA=$CA_LETSENCRYPT_V2_TEST
 
@@ -42,14 +41,13 @@ CA_NAMES="
 ZeroSSL.com,zerossl
 LetsEncrypt.org,letsencrypt
 LetsEncrypt.org_test,letsencrypt_test,letsencrypttest
-BuyPass.com,buypass
-BuyPass.com_test,buypass_test,buypasstest
 SSL.com,sslcom
 Google.com,google
 Google.com_test,googletest,google_test
+Actalis.com,actalis.com,actalis
 "
 
-CA_SERVERS="$CA_ZEROSSL,$CA_LETSENCRYPT_V2,$CA_LETSENCRYPT_V2_TEST,$CA_BUYPASS,$CA_BUYPASS_TEST,$CA_SSLCOM_RSA,$CA_GOOGLE,$CA_GOOGLE_TEST"
+CA_SERVERS="$CA_ZEROSSL,$CA_LETSENCRYPT_V2,$CA_LETSENCRYPT_V2_TEST,$CA_SSLCOM_RSA,$CA_GOOGLE,$CA_GOOGLE_TEST,$CA_ACTALIS"
 
 DEFAULT_USER_AGENT="$PROJECT_NAME/$VER ($PROJECT)"
 
@@ -67,7 +65,7 @@ ID_TYPE_IP="ip"
 
 LOCAL_ANY_ADDRESS="0.0.0.0"
 
-DEFAULT_RENEW=60
+DEFAULT_RENEW="${DEFAULT_RENEW:-30}"
 
 NO_VALUE="no"
 
@@ -180,6 +178,8 @@ _VALIDITY_WIKI="https://github.com/acmesh-official/acme.sh/wiki/Validity"
 
 _DNSCHECK_WIKI="https://github.com/acmesh-official/acme.sh/wiki/dnscheck"
 
+_PROFILESELECTION_WIKI="https://github.com/acmesh-official/acme.sh/wiki/Profile-selection"
+
 _DNS_MANUAL_ERR="The dns manual mode can not renew automatically, you must issue it again manually. You'd better use the other modes instead."
 
 _DNS_MANUAL_WARN="It seems that you are using dns manual mode. please take care: $_DNS_MANUAL_ERR"
@@ -250,6 +250,13 @@ _dlg_versions() {
     socat -V 2>&1
   else
     _debug "socat doesn't exist."
+    if _exists "python3"; then
+      python3 -V 2>&1
+    elif _exists "python2"; then
+      python2 -V 2>&1
+    elif _exists "python"; then
+      python -V 2>&1
+    fi
   fi
 }
 
@@ -436,14 +443,28 @@ _secure_debug3() {
   fi
 }
 
+__USE_TR_TAG=""
+if [ "$(echo "abc" | LANG=C tr a-z A-Z 2>/dev/null)" != "ABC" ]; then
+  __USE_TR_TAG="1"
+fi
+export __USE_TR_TAG
+
 _upper_case() {
-  # shellcheck disable=SC2018,SC2019
-  tr '[a-z]' '[A-Z]'
+  if [ "$__USE_TR_TAG" ]; then
+    LANG=C tr '[:lower:]' '[:upper:]'
+  else
+    # shellcheck disable=SC2018,SC2019
+    LANG=C tr '[a-z]' '[A-Z]'
+  fi
 }
 
 _lower_case() {
-  # shellcheck disable=SC2018,SC2019
-  tr '[A-Z]' '[a-z]'
+  if [ "$__USE_TR_TAG" ]; then
+    LANG=C tr '[:upper:]' '[:lower:]'
+  else
+    # shellcheck disable=SC2018,SC2019
+    LANG=C tr '[A-Z]' '[a-z]'
+  fi
 }
 
 _startswith() {
@@ -574,11 +595,6 @@ if [ "$(printf '\x41')" != 'A' ]; then
   _URGLY_PRINTF=1
 fi
 
-_ESCAPE_XARGS=""
-if _exists xargs && [ "$(printf %s '\\x41' | xargs printf)" = 'A' ]; then
-  _ESCAPE_XARGS=1
-fi
-
 _h2b() {
   if _exists xxd; then
     if _contains "$(xxd --help 2>&1)" "assumes -c30"; then
@@ -597,17 +613,8 @@ _h2b() {
   jc=""
   _debug2 _URGLY_PRINTF "$_URGLY_PRINTF"
   if [ -z "$_URGLY_PRINTF" ]; then
-    if [ "$_ESCAPE_XARGS" ] && _exists xargs; then
-      _debug2 "xargs"
-      echo "$hex" | _upper_case | sed 's/\([0-9A-F]\{2\}\)/\\\\\\x\1/g' | xargs printf
-    else
-      for h in $(echo "$hex" | _upper_case | sed 's/\([0-9A-F]\{2\}\)/ \1/g'); do
-        if [ -z "$h" ]; then
-          break
-        fi
-        printf "\x$h%s"
-      done
-    fi
+    # shellcheck disable=SC2059
+    printf "$(echo "$hex" | _upper_case | sed 's/\([0-9A-F]\{2\}\)/\\x\1/g')"
   else
     for c in $(echo "$hex" | _upper_case | sed 's/\([0-9A-F]\)/ \1/g'); do
       if [ -z "$ic" ]; then
@@ -1017,7 +1024,7 @@ _digest() {
 
   outputhex="$2"
 
-  if [ "$alg" = "sha256" ] || [ "$alg" = "sha1" ] || [ "$alg" = "md5" ]; then
+  if [ "$alg" = "sha3-256" ] || [ "$alg" = "sha256" ] || [ "$alg" = "sha1" ] || [ "$alg" = "md5" ]; then
     if [ "$outputhex" ]; then
       ${ACME_OPENSSL_BIN:-openssl} dgst -"$alg" -hex | cut -d = -f 2 | tr -d ' '
     else
@@ -1236,7 +1243,7 @@ _idn() {
   fi
 }
 
-#_createcsr  cn  san_list  keyfile csrfile conf acmeValidationv1
+#_createcsr  cn  san_list  keyfile csrfile conf acmeValidationv1 extendedUsage
 _createcsr() {
   _debug _createcsr
   domain="$1"
@@ -1245,6 +1252,7 @@ _createcsr() {
   csr="$4"
   csrconf="$5"
   acmeValidationv1="$6"
+  extusage="$7"
   _debug2 domain "$domain"
   _debug2 domainlist "$domainlist"
   _debug2 csrkey "$csrkey"
@@ -1253,9 +1261,8 @@ _createcsr() {
 
   printf "[ req_distinguished_name ]\n[ req ]\ndistinguished_name = req_distinguished_name\nreq_extensions = v3_req\n[ v3_req ]" >"$csrconf"
 
-  if [ "$Le_ExtKeyUse" ]; then
-    _savedomainconf Le_ExtKeyUse "$Le_ExtKeyUse"
-    printf "\nextendedKeyUsage=$Le_ExtKeyUse\n" >>"$csrconf"
+  if [ "$extusage" ]; then
+    printf "\nextendedKeyUsage=$extusage\n" >>"$csrconf"
   else
     printf "\nextendedKeyUsage=serverAuth,clientAuth\n" >>"$csrconf"
   fi
@@ -1401,6 +1408,12 @@ _ss() {
     return 0
   fi
 
+  if [ "$(uname)" = "AIX" ]; then
+    _debug "Using: AIX netstat"
+    netstat -an | grep "^tcp" | grep "LISTEN" | grep "\.$_port "
+    return 0
+  fi
+
   if _exists "netstat"; then
     _debug "Using: netstat"
     if netstat -help 2>&1 | grep "\-p proto" >/dev/null; then
@@ -1446,7 +1459,7 @@ _toPkcs() {
     ${ACME_OPENSSL_BIN:-openssl} pkcs12 -export -out "$_cpfx" -inkey "$_ckey" -in "$_ccert" -certfile "$_cca"
   fi
   if [ "$?" = "0" ]; then
-    _savedomainconf "Le_PFXPassword" "$pfxPassword"
+    _savedomainconf "Le_PFXPassword" "$pfxPassword" "base64"
   fi
 
 }
@@ -1586,6 +1599,7 @@ createCSR() {
   domain="$1"
   domainlist="$2"
   _isEcc="$3"
+  _csreku="$4"
 
   _initpath "$domain" "$_isEcc"
 
@@ -1599,7 +1613,7 @@ createCSR() {
     _err "Please create it first."
     return 1
   fi
-  _createcsr "$domain" "$domainlist" "$CERT_KEY_PATH" "$CSR_PATH" "$DOMAIN_SSL_CONF"
+  _createcsr "$domain" "$domainlist" "$CERT_KEY_PATH" "$CSR_PATH" "$DOMAIN_SSL_CONF" "" "$_csreku"
 
 }
 
@@ -1805,6 +1819,10 @@ _time() {
 #    2022-04-01 08:10:33   to   1648800633
 #or  2022-04-01T08:10:33Z  to   1648800633
 _date2time() {
+  #Mac/BSD
+  if date -u -j -f "%Y-%m-%d %H:%M:%S" "$(echo "$1" | tr -d "Z" | tr "T" ' ')" +"%s" 2>/dev/null; then
+    return
+  fi
   #Linux
   if date -u -d "$(echo "$1" | tr -d "Z" | tr "T" ' ')" +"%s" 2>/dev/null; then
     return
@@ -1814,10 +1832,6 @@ _date2time() {
   if gdate -u -d "$(echo "$1" | tr -d "Z" | tr "T" ' ')" +"%s" 2>/dev/null; then
     return
   fi
-  #Mac/BSD
-  if date -u -j -f "%Y-%m-%d %H:%M:%S" "$(echo "$1" | tr -d "Z" | tr "T" ' ')" +"%s" 2>/dev/null; then
-    return
-  fi
   #Omnios
   if python3 -c "import datetime; print(int(datetime.datetime.strptime(\"$1\", \"%Y-%m-%d %H:%M:%S\").replace(tzinfo=datetime.timezone.utc).timestamp()))" 2>/dev/null; then
     return
@@ -1877,6 +1891,11 @@ _inithttp() {
 
   if [ -z "$_ACME_CURL" ] && _exists "curl"; then
     _ACME_CURL="curl --silent --dump-header $HTTP_HEADER "
+    if [ "$ACME_USE_IPV6_REQUESTS" ]; then
+      _ACME_CURL="$_ACME_CURL --ipv6 "
+    elif [ "$ACME_USE_IPV4_REQUESTS" ]; then
+      _ACME_CURL="$_ACME_CURL --ipv4 "
+    fi
     if [ -z "$ACME_HTTP_NO_REDIRECTS" ]; then
       _ACME_CURL="$_ACME_CURL -L "
     fi
@@ -1904,6 +1923,11 @@ _inithttp() {
 
   if [ -z "$_ACME_WGET" ] && _exists "wget"; then
     _ACME_WGET="wget -q"
+    if [ "$ACME_USE_IPV6_REQUESTS" ]; then
+      _ACME_WGET="$_ACME_WGET --inet6-only "
+    elif [ "$ACME_USE_IPV4_REQUESTS" ]; then
+      _ACME_WGET="$_ACME_WGET --inet4-only "
+    fi
     if [ "$ACME_HTTP_NO_REDIRECTS" ]; then
       _ACME_WGET="$_ACME_WGET --max-redirect 0 "
     fi
@@ -2321,6 +2345,7 @@ _setopt() {
   fi
   if [ ! -f "$__conf" ]; then
     touch "$__conf"
+    chmod 600 "$__conf"
   fi
   if [ -n "$(_tail_c 1 <"$__conf")" ]; then
     echo >>"$__conf"
@@ -2529,37 +2554,76 @@ _startserver() {
   _debug Le_Listen_V4 "$Le_Listen_V4"
   _debug Le_Listen_V6 "$Le_Listen_V6"
 
-  _NC="socat"
-  if [ "$Le_Listen_V6" ]; then
-    _NC="$_NC -6"
-  else
-    _NC="$_NC -4"
-  fi
+  if _exists "socat"; then
+    _NC="socat"
+    if [ "$Le_Listen_V6" ]; then
+      _NC="$_NC -6"
+      SOCAT_OPTIONS=TCP6-LISTEN
+    elif [ "$Le_Listen_V4" ]; then
+      _NC="$_NC -4"
+      SOCAT_OPTIONS=TCP4-LISTEN
+    else
+      SOCAT_OPTIONS=TCP-LISTEN
+    fi
 
-  if [ "$DEBUG" ] && [ "$DEBUG" -gt "1" ]; then
-    _NC="$_NC -d -d -v"
-  fi
+    if [ "$DEBUG" ] && [ "$DEBUG" -gt "1" ]; then
+      _NC="$_NC -d -d -v"
+    fi
 
-  SOCAT_OPTIONS=TCP-LISTEN:$Le_HTTPPort,crlf,reuseaddr,fork
+    SOCAT_OPTIONS=$SOCAT_OPTIONS:$Le_HTTPPort,crlf,reuseaddr,fork
 
-  #Adding bind to local-address
-  if [ "$ncaddr" ]; then
-    SOCAT_OPTIONS="$SOCAT_OPTIONS,bind=${ncaddr}"
-  fi
+    #Adding bind to local-address
+    if [ "$ncaddr" ]; then
+      SOCAT_OPTIONS="$SOCAT_OPTIONS,bind=${ncaddr}"
+    fi
 
-  _content_len="$(printf "%s" "$content" | wc -c)"
-  _debug _content_len "$_content_len"
-  _debug "_NC" "$_NC $SOCAT_OPTIONS"
-  export _SOCAT_ERR="$(_mktemp)"
-  $_NC $SOCAT_OPTIONS SYSTEM:"sleep 1; \
+    _content_len="$(printf "%s" "$content" | wc -c)"
+    _debug _content_len "$_content_len"
+    _debug "_NC" "$_NC $SOCAT_OPTIONS"
+    export _SOCAT_ERR="$(_mktemp)"
+    $_NC $SOCAT_OPTIONS SYSTEM:"sleep 1; \
 echo 'HTTP/1.0 200 OK'; \
 echo 'Content-Length\: $_content_len'; \
 echo ''; \
 printf '%s' '$content';" 2>"$_SOCAT_ERR" &
-  serverproc="$!"
+    serverproc="$!"
+  else
+    _PYTHON=""
+    if _exists "python3"; then
+      _PYTHON="python3"
+    elif _exists "python2"; then
+      _PYTHON="python2"
+    elif _exists "python"; then
+      _PYTHON="python"
+    fi
+    if [ "$_PYTHON" ]; then
+      _debug "Using python: $_PYTHON"
+      _AF="socket.AF_INET"
+      _BIND_ADDR="0.0.0.0"
+      if [ "$Le_Listen_V6" ]; then
+        _AF="socket.AF_INET6"
+        _BIND_ADDR="::"
+      fi
+      if [ "$ncaddr" ]; then
+        _BIND_ADDR="$ncaddr"
+      fi
+      export _SOCAT_ERR="$(_mktemp)"
+      $_PYTHON -c "import socket,sys;s=socket.socket($_AF,socket.SOCK_STREAM);s.setsockopt(socket.SOL_SOCKET,socket.SO_REUSEADDR,1);s.bind((sys.argv[2],int(sys.argv[1])));s.listen(5);res='HTTP/1.0 200 OK\r\nContent-Length: '+str(len(sys.argv[3]))+'\r\n\r\n'+sys.argv[3];
+while True:
+ c,a=s.accept()
+ c.sendall(res.encode() if hasattr(res, 'encode') else res)
+ c.close()" "$Le_HTTPPort" "$_BIND_ADDR" "$content" 2>"$_SOCAT_ERR" &
+      serverproc="$!"
+      _NC="$_PYTHON"
+    else
+      _err "Please install socat or python first for standalone mode."
+      return 1
+    fi
+  fi
+
   if [ -f "$_SOCAT_ERR" ]; then
     if grep "Permission denied" "$_SOCAT_ERR" >/dev/null; then
-      _err "socat: $(cat $_SOCAT_ERR)"
+      _err "$_NC: $(cat $_SOCAT_ERR)"
       _err "Can not listen for user: $(whoami)"
       _err "Maybe try with root again?"
       rm -f "$_SOCAT_ERR"
@@ -2749,6 +2813,7 @@ _clearAPI() {
   ACME_REVOKE_CERT=""
   ACME_NEW_NONCE=""
   ACME_AGREEMENT=""
+  ACME_RENEWAL_INFO=""
 }
 
 #server
@@ -2761,7 +2826,7 @@ _initAPI() {
   _request_retry_times=0
   while [ -z "$ACME_NEW_ACCOUNT" ] && [ "${_request_retry_times}" -lt "$MAX_API_RETRY_TIMES" ]; do
     _request_retry_times=$(_math "$_request_retry_times" + 1)
-    response=$(_get "$_api_server")
+    response=$(_get "$_api_server" "" 10)
     if [ "$?" != "0" ]; then
       _debug2 "response" "$response"
       _info "Cannot init API for: $_api_server."
@@ -2793,6 +2858,9 @@ _initAPI() {
     ACME_AGREEMENT=$(echo "$response" | _egrep_o 'termsOfService" *: *"[^"]*"' | cut -d '"' -f 3)
     export ACME_AGREEMENT
 
+    ACME_RENEWAL_INFO=$(echo "$response" | _egrep_o 'renewalInfo" *: *"[^"]*"' | cut -d '"' -f 3)
+    export ACME_RENEWAL_INFO
+
     _debug "ACME_KEY_CHANGE" "$ACME_KEY_CHANGE"
     _debug "ACME_NEW_AUTHZ" "$ACME_NEW_AUTHZ"
     _debug "ACME_NEW_ORDER" "$ACME_NEW_ORDER"
@@ -2800,6 +2868,7 @@ _initAPI() {
     _debug "ACME_REVOKE_CERT" "$ACME_REVOKE_CERT"
     _debug "ACME_AGREEMENT" "$ACME_AGREEMENT"
     _debug "ACME_NEW_NONCE" "$ACME_NEW_NONCE"
+    _debug "ACME_RENEWAL_INFO" "$ACME_RENEWAL_INFO"
     if [ "$ACME_NEW_ACCOUNT" ] && [ "$ACME_NEW_ORDER" ]; then
       return 0
     fi
@@ -3507,7 +3576,7 @@ _on_before_issue() {
   _debug _chk_alt_domains "$_chk_alt_domains"
   #run pre hook
   if [ "$_chk_pre_hook" ]; then
-    _info "Runing pre hook:'$_chk_pre_hook'"
+    _info "Running pre hook:'$_chk_pre_hook'"
     if ! (
       export Le_Domain="$_chk_main_domain"
       export Le_Alt="$_chk_alt_domains"
@@ -3518,9 +3587,9 @@ _on_before_issue() {
     fi
   fi
 
-  if _hasfield "$_chk_web_roots" "$NO_VALUE"; then
-    if ! _exists "socat"; then
-      _err "Please install socat tools first."
+  if _hasfield "$_chk_web_roots" "$NO_VALUE" && [ "$_chk_web_roots" = "$NO_VALUE" ]; then
+    if ! _exists "socat" && ! _exists "python" && ! _exists "python2" && ! _exists "python3"; then
+      _err "Please install socat or python tools first."
       return 1
     fi
   fi
@@ -4410,6 +4479,8 @@ issue() {
   _preferred_chain="${15}"
   _valid_from="${16}"
   _valid_to="${17}"
+  _certificate_profile="${18}"
+  _extended_key_usage="${19}"
 
   if [ -z "$_ACME_IS_RENEW" ]; then
     _initpath "$_main_domain" "$_key_length"
@@ -4429,7 +4500,7 @@ issue() {
     Le_NextRenewTime=$(_readdomainconf Le_NextRenewTime)
     _debug Le_NextRenewTime "$Le_NextRenewTime"
     if [ -z "$FORCE" ] && [ "$Le_NextRenewTime" ] && [ "$(_time)" -lt "$Le_NextRenewTime" ]; then
-      _valid_to_saved=$(_readdomainconf Le_Valid_to)
+      _valid_to_saved=$(_readdomainconf Le_Valid_To)
       if [ "$_valid_to_saved" ] && ! _startswith "$_valid_to_saved" "+"; then
         _info "The domain is set to be valid to: $_valid_to_saved"
         _info "It cannot be renewed automatically"
@@ -4485,6 +4556,11 @@ issue() {
   else
     _cleardomainconf "Le_Preferred_Chain"
   fi
+  if [ "$_certificate_profile" ]; then
+    _savedomainconf "Le_Certificate_Profile" "$_certificate_profile"
+  else
+    _cleardomainconf "Le_Certificate_Profile"
+  fi
 
   Le_API="$ACME_DIRECTORY"
   _savedomainconf "Le_API" "$Le_API"
@@ -4496,6 +4572,7 @@ issue() {
 
   if ! _on_before_issue "$_web_roots" "$_main_domain" "$_alt_domains" "$_pre_hook" "$_local_addr"; then
     _err "_on_before_issue."
+    _on_issue_err "$_post_hook"
     return 1
   fi
 
@@ -4548,12 +4625,25 @@ issue() {
         return 1
       fi
     fi
-    if ! _createcsr "$_main_domain" "$_alt_domains" "$CERT_KEY_PATH" "$CSR_PATH" "$DOMAIN_SSL_CONF"; then
+    _keyusage="$_extended_key_usage"
+    if [ "$Le_API" = "$CA_GOOGLE" ] || [ "$Le_API" = "$CA_GOOGLE_TEST" ]; then
+      if [ -z "$_keyusage" ]; then
+        #https://github.com/acmesh-official/acme.sh/issues/6610
+        #google accepts serverauth only
+        _keyusage="serverAuth"
+      fi
+    fi
+    if ! _createcsr "$_main_domain" "$_alt_domains" "$CERT_KEY_PATH" "$CSR_PATH" "$DOMAIN_SSL_CONF" "" "$_keyusage"; then
       _err "Error creating CSR."
       _clearup
       _on_issue_err "$_post_hook"
       return 1
     fi
+    if [ "$_extended_key_usage" ]; then
+      _savedomainconf "Le_ExtKeyUse" "$_extended_key_usage"
+    else
+      _cleardomainconf "Le_ExtKeyUse"
+    fi
   fi
 
   _savedomainconf "Le_Keylength" "$_key_length"
@@ -4616,6 +4706,9 @@ issue() {
     if [ "$_notAfter" ]; then
       _newOrderObj="$_newOrderObj,\"notAfter\": \"$_notAfter\""
     fi
+    if [ "$_certificate_profile" ]; then
+      _newOrderObj="$_newOrderObj,\"profile\": \"$_certificate_profile\""
+    fi
     _debug "STEP 1, Ordering a Certificate"
     if ! _send_signed_request "$ACME_NEW_ORDER" "$_newOrderObj}"; then
       _err "Error creating new order."
@@ -4755,7 +4848,8 @@ $_authorizations_map"
         _debug keyauthorization "$keyauthorization"
       fi
 
-      entry="$(echo "$response" | _egrep_o '[^\{]*"type":"'$vtype'"[^\}]*')"
+      # Fix for empty error objects in response which mess up the original code, adapted from fix suggested here: https://github.com/acmesh-official/acme.sh/issues/4933#issuecomment-1870499018
+      entry="$(echo "$response" | sed s/'"error":{}'/'"error":null'/ | _egrep_o '[^\{]*"type":"'$vtype'"[^\}]*')"
       _debug entry "$entry"
 
       if [ -z "$keyauthorization" -a -z "$entry" ]; then
@@ -5088,7 +5182,12 @@ $_authorizations_map"
         if [ "$DEBUG" ]; then
           if [ "$vtype" = "$VTYPE_HTTP" ]; then
             _debug "Debug: GET token URL."
-            _get "http://$d/.well-known/acme-challenge/$token" "" 1
+            if _isIPv6 "$d"; then
+              host="[$d]"
+            else
+              host="$d"
+            fi
+            _get "http://$host/.well-known/acme-challenge/$token" "" 1
           fi
         fi
         _clearupwebbroot "$_currentRoot" "$removelevel" "$token"
@@ -5183,11 +5282,21 @@ $_authorizations_map"
         return 1
       fi
       break
+    elif _contains "$response" "\"ready\""; then
+      _info "Order status is 'ready', let's sleep and retry."
+      _retryafter=$(echo "$responseHeaders" | grep -i "^Retry-After *:" | cut -d : -f 2 | tr -d ' ' | tr -d '\r')
+      _debug "_retryafter" "$_retryafter"
+      if [ "$_retryafter" ] && [ $_retryafter -gt 0 ]; then
+        _info "Sleeping for $_retryafter seconds then retrying"
+        _sleep $_retryafter
+      else
+        _sleep 2
+      fi
     elif _contains "$response" "\"processing\""; then
       _info "Order status is 'processing', let's sleep and retry."
       _retryafter=$(echo "$responseHeaders" | grep -i "^Retry-After *:" | cut -d : -f 2 | tr -d ' ' | tr -d '\r')
       _debug "_retryafter" "$_retryafter"
-      if [ "$_retryafter" ]; then
+      if [ "$_retryafter" ] && [ $_retryafter -gt 0 ]; then
         _info "Sleeping for $_retryafter seconds then retrying"
         _sleep $_retryafter
       else
@@ -5216,6 +5325,11 @@ $_authorizations_map"
     _link_cert_retry="$(_math $_link_cert_retry + 1)"
   done
 
+  # cover case where the final poll returned 'valid'
+  if [ -z "$Le_LinkCert" ] && _contains "$response" "\"status\":\"valid\""; then
+    Le_LinkCert="$(echo "$response" | _egrep_o '"certificate" *: *"[^"]*"' | cut -d '"' -f 4)"
+  fi
+
   if [ -z "$Le_LinkCert" ]; then
     _err "Signing failed. Could not get Le_LinkCert, and stopped retrying after reaching the retry limit."
     _err "$response"
@@ -5381,10 +5495,10 @@ $_authorizations_map"
   _savedomainconf "Le_NextRenewTime" "$Le_NextRenewTime"
 
   #convert to pkcs12
+  Le_PFXPassword="$(_readdomainconf Le_PFXPassword)"
   if [ "$Le_PFXPassword" ]; then
     _toPkcs "$CERT_PFX_PATH" "$CERT_KEY_PATH" "$CERT_PATH" "$CA_CERT_PATH" "$Le_PFXPassword"
   fi
-  export CERT_PFX_PATH
 
   if [ "$_real_cert$_real_key$_real_ca$_reload_cmd$_real_fullchain" ]; then
     _savedomainconf "Le_RealCertPath" "$_real_cert"
@@ -5447,20 +5561,17 @@ renew() {
   . "$DOMAIN_CONF"
   _debug Le_API "$Le_API"
 
-  case "$Le_API" in
-  "$CA_LETSENCRYPT_V2_TEST")
-    _info "Switching back to $CA_LETSENCRYPT_V2"
-    Le_API="$CA_LETSENCRYPT_V2"
-    ;;
-  "$CA_BUYPASS_TEST")
-    _info "Switching back to $CA_BUYPASS"
-    Le_API="$CA_BUYPASS"
-    ;;
-  "$CA_GOOGLE_TEST")
-    _info "Switching back to $CA_GOOGLE"
-    Le_API="$CA_GOOGLE"
-    ;;
-  esac
+  #don't switch it back
+  #  case "$Le_API" in
+  #  "$CA_LETSENCRYPT_V2_TEST")
+  #    _info "Switching back to $CA_LETSENCRYPT_V2"
+  #    Le_API="$CA_LETSENCRYPT_V2"
+  #    ;;
+  #  "$CA_GOOGLE_TEST")
+  #    _info "Switching back to $CA_GOOGLE"
+  #    Le_API="$CA_GOOGLE"
+  #    ;;
+  #  esac
 
   if [ "$_server" ]; then
     Le_API="$_server"
@@ -5497,6 +5608,11 @@ renew() {
   Le_PostHook="$(_readdomainconf Le_PostHook)"
   Le_RenewHook="$(_readdomainconf Le_RenewHook)"
   Le_Preferred_Chain="$(_readdomainconf Le_Preferred_Chain)"
+  Le_Certificate_Profile="$(_readdomainconf Le_Certificate_Profile)"
+  Le_Valid_From="$(_readdomainconf Le_Valid_From)"
+  Le_Valid_To="$(_readdomainconf Le_Valid_To)"
+  Le_ExtKeyUse="$(_readdomainconf Le_ExtKeyUse)"
+
   # When renewing from an old version, the empty Le_Keylength means 2048.
   # Note, do not use DEFAULT_DOMAIN_KEY_LENGTH as that value may change over
   # time but an empty value implies 2048 specifically.
@@ -5504,7 +5620,14 @@ renew() {
   if [ -z "$Le_Keylength" ]; then
     Le_Keylength=2048
   fi
-  issue "$Le_Webroot" "$Le_Domain" "$Le_Alt" "$Le_Keylength" "$Le_RealCertPath" "$Le_RealKeyPath" "$Le_RealCACertPath" "$Le_ReloadCmd" "$Le_RealFullChainPath" "$Le_PreHook" "$Le_PostHook" "$Le_RenewHook" "$Le_LocalAddress" "$Le_ChallengeAlias" "$Le_Preferred_Chain" "$Le_Valid_From" "$Le_Valid_To"
+  if [ "$CA_LETSENCRYPT_V2" = "$Le_API" ]; then
+    #letsencrypt doesn't support ocsp anymore
+    if [ "$Le_OCSP_Staple" ]; then
+      export Le_OCSP_Staple=""
+      _cleardomainconf Le_OCSP_Staple
+    fi
+  fi
+  issue "$Le_Webroot" "$Le_Domain" "$Le_Alt" "$Le_Keylength" "$Le_RealCertPath" "$Le_RealKeyPath" "$Le_RealCACertPath" "$Le_ReloadCmd" "$Le_RealFullChainPath" "$Le_PreHook" "$Le_PostHook" "$Le_RenewHook" "$Le_LocalAddress" "$Le_ChallengeAlias" "$Le_Preferred_Chain" "$Le_Valid_From" "$Le_Valid_To" "$Le_Certificate_Profile" "$Le_ExtKeyUse"
   res="$?"
   if [ "$res" != "0" ]; then
     return "$res"
@@ -5550,7 +5673,7 @@ renewAll() {
   _set_level=${NOTIFY_LEVEL:-$NOTIFY_LEVEL_DEFAULT}
   _debug "_set_level" "$_set_level"
   export _ACME_IN_RENEWALL=1
-  for di in "${CERT_HOME}"/*.*/; do
+  for di in "${CERT_HOME}"/*.* "${CERT_HOME}"/*:*; do
     _debug di "$di"
     if ! [ -d "$di" ]; then
       _debug "Not a directory, skipping: $di"
@@ -5648,6 +5771,9 @@ ${_skipped_msg}
     fi
   fi
 
+  if [ "$_TREAT_SKIP_AS_SUCCESS" ] && [ "$_ret" = "$RENEW_SKIP" ]; then
+    _ret=0
+  fi
   return "$_ret"
 }
 
@@ -5671,6 +5797,10 @@ signcsr() {
   _local_addr="${11}"
   _challenge_alias="${12}"
   _preferred_chain="${13}"
+  _valid_f="${14}"
+  _valid_t="${15}"
+  _cert_prof="${16}"
+  _en_key_usage="${17}"
 
   _csrsubj=$(_readSubjectFromCSR "$_csrfile")
   if [ "$?" != "0" ]; then
@@ -5714,7 +5844,7 @@ signcsr() {
   _info "Copying CSR to: $CSR_PATH"
   cp "$_csrfile" "$CSR_PATH"
 
-  issue "$_csrW" "$_csrsubj" "$_csrdomainlist" "$_csrkeylength" "$_real_cert" "$_real_key" "$_real_ca" "$_reload_cmd" "$_real_fullchain" "$_pre_hook" "$_post_hook" "$_renew_hook" "$_local_addr" "$_challenge_alias" "$_preferred_chain"
+  issue "$_csrW" "$_csrsubj" "$_csrdomainlist" "$_csrkeylength" "$_real_cert" "$_real_key" "$_real_ca" "$_reload_cmd" "$_real_fullchain" "$_pre_hook" "$_post_hook" "$_renew_hook" "$_local_addr" "$_challenge_alias" "$_preferred_chain" "$_valid_f" "$_valid_t" "$_cert_prof" "$_en_key_usage"
 
 }
 
@@ -5765,9 +5895,10 @@ list() {
   _sep="|"
   if [ "$_raw" ]; then
     if [ -z "$_domain" ]; then
-      printf "%s\n" "Main_Domain${_sep}KeyLength${_sep}SAN_Domains${_sep}CA${_sep}Created${_sep}Renew"
+      printf "%s\n" "Main_Domain${_sep}KeyLength${_sep}SAN_Domains${_sep}Profile${_sep}CA${_sep}Created${_sep}Renew"
     fi
-    for di in "${CERT_HOME}"/*.*/; do
+    for di in "${CERT_HOME}"/*.* "${CERT_HOME}"/*:*; do
+      [ -d "$di" ] || continue
       d=$(basename "$di")
       _debug d "$d"
       (
@@ -5780,7 +5911,7 @@ list() {
           . "$DOMAIN_CONF"
           _ca="$(_getCAShortName "$Le_API")"
           if [ -z "$_domain" ]; then
-            printf "%s\n" "$Le_Domain${_sep}\"$Le_Keylength\"${_sep}$Le_Alt${_sep}$_ca${_sep}$Le_CertCreateTimeStr${_sep}$Le_NextRenewTimeStr"
+            printf "%s\n" "$Le_Domain${_sep}\"$Le_Keylength\"${_sep}$Le_Alt${_sep}$Le_Certificate_Profile${_sep}$_ca${_sep}$Le_CertCreateTimeStr${_sep}$Le_NextRenewTimeStr"
           else
             if [ "$_domain" = "$d" ]; then
               cat "$DOMAIN_CONF"
@@ -5799,6 +5930,48 @@ list() {
 
 }
 
+list_profiles() {
+  _initpath
+  _initAPI
+
+  _l_server_url="$ACME_DIRECTORY"
+  _l_server_name="$(_getCAShortName "$_l_server_url")"
+  _info "Fetching profiles from $_l_server_name ($_l_server_url)..."
+
+  response=$(_get "$_l_server_url" "" 10)
+  if [ "$?" != "0" ]; then
+    _err "Failed to connect to CA directory: $_l_server_url"
+    return 1
+  fi
+
+  normalized_response=$(echo "$response" | _normalizeJson)
+  profiles_json=$(echo "$normalized_response" | _egrep_o '"profiles" *: *\{[^\}]*\}')
+
+  if [ -z "$profiles_json" ]; then
+    _info "The CA '$_l_server_name' does not publish certificate profiles via its directory endpoint."
+    return 0
+  fi
+
+  # Strip the outer layer to get the key-value pairs
+  profiles_kv=$(echo "$profiles_json" | sed 's/"profiles" *: *{//' | sed 's/}$//' | tr ',' '\n')
+
+  printf "\n%-15s %s\n" "name" "info"
+  printf -- "--------------------------------------------------------------------\n"
+
+  _old_IFS="$IFS"
+  IFS='
+'
+  for pair in $profiles_kv; do
+    # Trim quotes and whitespace
+    _name=$(echo "$pair" | cut -d: -f1 | tr -d '" \t')
+    _info_url=$(echo "$pair" | cut -d: -f2- | sed 's/^ *//' | tr -d '"')
+    printf "%-15s %s\n" "$_name" "$_info_url"
+  done
+  IFS="$_old_IFS"
+
+  return 0
+}
+
 _deploy() {
   _d="$1"
   _hooks="$2"
@@ -6337,7 +6510,8 @@ _deactivate() {
     fi
     _debug "Trigger validation."
     vtype="$(_getIdType "$_d_domain")"
-    entry="$(echo "$response" | _egrep_o '[^\{]*"type":"'$vtype'"[^\}]*')"
+    # Fix for empty error objects in response which mess up the original code, adapted from fix suggested here: https://github.com/acmesh-official/acme.sh/issues/4933#issuecomment-1870499018
+    entry="$(echo "$response" | sed s/'"error":{}'/'"error":null'/ | _egrep_o '[^\{]*"type":"'$vtype'"[^\}]*')"
     _debug entry "$entry"
     if [ -z "$entry" ]; then
       _err "$d: Cannot get domain token"
@@ -6421,6 +6595,36 @@ deactivate() {
   done
 }
 
+#cert
+_getAKI() {
+  _cert="$1"
+  openssl x509 -in "$_cert" -text -noout | grep "X509v3 Authority Key Identifier" -A 1 | _tail_n 1 | tr -d ' :'
+}
+
+#cert
+_getSerial() {
+  _cert="$1"
+  openssl x509 -in "$_cert" -serial -noout | cut -d = -f 2
+}
+
+#cert
+_get_ARI() {
+  _cert="$1"
+  _aki=$(_getAKI "$_cert")
+  _ser=$(_getSerial "$_cert")
+  _debug2 "_aki" "$_aki"
+  _debug2 "_ser" "$_ser"
+
+  _akiurl="$(echo "$_aki" | _h2b | _base64 | tr -d = | _url_encode)"
+  _debug2 "_akiurl" "$_akiurl"
+  _serurl="$(echo "$_ser" | _h2b | _base64 | tr -d = | _url_encode)"
+  _debug2 "_serurl" "$_serurl"
+
+  _ARI_URL="$ACME_RENEWAL_INFO/$_akiurl.$_serurl"
+  _get "$_ARI_URL"
+
+}
+
 # Detect profile file if not specified as environment variable
 _detect_profile() {
   if [ -n "$PROFILE" -a -f "$PROFILE" ]; then
@@ -6469,6 +6673,7 @@ _initconf() {
 #NO_TIMESTAMP=1
 
     " >"$ACCOUNT_CONF_PATH"
+    chmod 600 "$ACCOUNT_CONF_PATH"
   fi
 }
 
@@ -6504,9 +6709,9 @@ _precheck() {
     return 1
   fi
 
-  if ! _exists "socat"; then
-    _err "It is recommended to install socat first."
-    _err "We use socat for the standalone server, which is used for standalone mode."
+  if ! _exists "socat" && ! _exists "python" && ! _exists "python2" && ! _exists "python3"; then
+    _err "It is recommended to install socat or python first."
+    _err "We use socat or python for the standalone server, which is used for standalone mode."
     _err "If you don't want to use standalone mode, you may ignore this warning."
   fi
 
@@ -6787,6 +6992,7 @@ cron() {
 
     _info "Automatically upgraded to: $VER"
   fi
+  _TREAT_SKIP_AS_SUCCESS="1"
   renewAll
   _ret="$?"
   _ACME_IN_CRON=""
@@ -6976,6 +7182,9 @@ Parameters:
                                       If no match, the default offered chain will be used. (default: empty)
                                       See: $_PREFERRED_CHAIN_WIKI
 
+  --cert-profile, --certificate-profile <profile>  If the CA offers profiles, select the desired profile
+                                      See: $_PROFILESELECTION_WIKI
+
   --valid-to    <date-time>         Request the NotAfter field of the cert.
                                       See: $_VALIDITY_WIKI
   --valid-from  <date-time>         Request the NotBefore field of the cert.
@@ -7031,6 +7240,7 @@ Parameters:
   --local-address <ip>              Specifies the standalone/tls server listening address, in case you have multiple ip addresses.
   --listraw                         Only used for '--list' command, list the certs in raw format.
   -se, --stop-renew-on-error        Only valid for '--renew-all' command. Stop if one cert has error in renewal.
+  --treat-skip-as-success           Only valid for '--renew-all' command. Treat skipped certs as success, return 0 instead of $RENEW_SKIP.
   --insecure                        Do not check the server certificate, in some devices, the api server's certificate may not be trusted.
   --ca-bundle <file>                Specifies the path to the CA certificate bundle to verify api server's certificate.
   --ca-path <directory>             Specifies directory containing CA certificates in PEM format, used by wget or curl.
@@ -7052,6 +7262,8 @@ Parameters:
   --auto-upgrade [0|1]              Valid for '--upgrade' command, indicating whether to upgrade automatically in future. Defaults to 1 if argument is omitted.
   --listen-v4                       Force standalone/tls server to listen at ipv4.
   --listen-v6                       Force standalone/tls server to listen at ipv6.
+  --request-v4                      Force client requests to use ipv4 to connect to the CA server.
+  --request-v6                      Force client requests to use ipv6 to connect to the CA server.
   --openssl-bin <file>              Specifies a custom openssl bin location.
   --use-wget                        Force to use wget, if you have both curl and wget installed.
   --yes-I-know-dns-manual-mode-enough-go-ahead-please  Force use of dns manual mode.
@@ -7170,6 +7382,24 @@ _processAccountConf() {
     _saveaccountconf "ACME_USE_WGET" "$ACME_USE_WGET"
   fi
 
+  if [ "$_request_v6" ]; then
+    _saveaccountconf "ACME_USE_IPV6_REQUESTS" "$_request_v6"
+    _clearaccountconf "ACME_USE_IPV4_REQUESTS"
+    ACME_USE_IPV4_REQUESTS=
+  elif [ "$_request_v4" ]; then
+    _saveaccountconf "ACME_USE_IPV4_REQUESTS" "$_request_v4"
+    _clearaccountconf "ACME_USE_IPV6_REQUESTS"
+    ACME_USE_IPV6_REQUESTS=
+  elif [ "$ACME_USE_IPV6_REQUESTS" ]; then
+    _saveaccountconf "ACME_USE_IPV6_REQUESTS" "$ACME_USE_IPV6_REQUESTS"
+    _clearaccountconf "ACME_USE_IPV4_REQUESTS"
+    ACME_USE_IPV4_REQUESTS=
+  elif [ "$ACME_USE_IPV4_REQUESTS" ]; then
+    _saveaccountconf "ACME_USE_IPV4_REQUESTS" "$ACME_USE_IPV4_REQUESTS"
+    _clearaccountconf "ACME_USE_IPV6_REQUESTS"
+    ACME_USE_IPV6_REQUESTS=
+  fi
+
 }
 
 _checkSudo() {
@@ -7335,6 +7565,8 @@ _process() {
   _local_address=""
   _log_level=""
   _auto_upgrade=""
+  _request_v4=""
+  _request_v6=""
   _listen_v4=""
   _listen_v6=""
   _openssl_bin=""
@@ -7351,6 +7583,8 @@ _process() {
   _preferred_chain=""
   _valid_from=""
   _valid_to=""
+  _certificate_profile=""
+  _extended_key_usage=""
   while [ ${#} -gt 0 ]; do
     case "${1}" in
 
@@ -7454,6 +7688,9 @@ _process() {
     --set-default-chain)
       _CMD="setdefaultchain"
       ;;
+    --list-profiles)
+      _CMD="list_profiles"
+      ;;
     -d | --domain)
       _dvalue="$2"
 
@@ -7484,6 +7721,9 @@ _process() {
     -f | --force)
       FORCE="1"
       ;;
+    --treat-skip-as-success | --treatskipassuccess)
+      _TREAT_SKIP_AS_SUCCESS="1"
+      ;;
     --staging | --test)
       STAGE="1"
       ;;
@@ -7669,6 +7909,10 @@ _process() {
       _valid_to="$2"
       shift
       ;;
+    --certificate-profile | --cert-profile)
+      _certificate_profile="$2"
+      shift
+      ;;
     --httpport)
       _httpport="$2"
       Le_HTTPPort="$_httpport"
@@ -7739,7 +7983,7 @@ _process() {
       shift
       ;;
     --extended-key-usage)
-      Le_ExtKeyUse="$2"
+      _extended_key_usage="$2"
       shift
       ;;
     --ocsp-must-staple | --ocsp)
@@ -7792,6 +8036,18 @@ _process() {
       fi
       AUTO_UPGRADE="$_auto_upgrade"
       ;;
+    --request-v4)
+      _request_v4="1"
+      ACME_USE_IPV4_REQUESTS="1"
+      _request_v6=""
+      ACME_USE_IPV6_REQUESTS=""
+      ;;
+    --request-v6)
+      _request_v6="1"
+      ACME_USE_IPV6_REQUESTS="1"
+      _request_v4=""
+      ACME_USE_IPV4_REQUESTS=""
+      ;;
     --listen-v4)
       _listen_v4="1"
       Le_Listen_V4="$_listen_v4"
@@ -7944,13 +8200,13 @@ _process() {
   uninstall) uninstall "$_nocron" ;;
   upgrade) upgrade ;;
   issue)
-    issue "$_webroot" "$_domain" "$_altdomains" "$_keylength" "$_cert_file" "$_key_file" "$_ca_file" "$_reloadcmd" "$_fullchain_file" "$_pre_hook" "$_post_hook" "$_renew_hook" "$_local_address" "$_challenge_alias" "$_preferred_chain" "$_valid_from" "$_valid_to"
+    issue "$_webroot" "$_domain" "$_altdomains" "$_keylength" "$_cert_file" "$_key_file" "$_ca_file" "$_reloadcmd" "$_fullchain_file" "$_pre_hook" "$_post_hook" "$_renew_hook" "$_local_address" "$_challenge_alias" "$_preferred_chain" "$_valid_from" "$_valid_to" "$_certificate_profile" "$_extended_key_usage"
     ;;
   deploy)
     deploy "$_domain" "$_deploy_hook" "$_ecc"
     ;;
   signcsr)
-    signcsr "$_csr" "$_webroot" "$_cert_file" "$_key_file" "$_ca_file" "$_reloadcmd" "$_fullchain_file" "$_pre_hook" "$_post_hook" "$_renew_hook" "$_local_address" "$_challenge_alias" "$_preferred_chain"
+    signcsr "$_csr" "$_webroot" "$_cert_file" "$_key_file" "$_ca_file" "$_reloadcmd" "$_fullchain_file" "$_pre_hook" "$_post_hook" "$_renew_hook" "$_local_address" "$_challenge_alias" "$_preferred_chain" "$_valid_from" "$_valid_to" "$_certificate_profile" "$_extended_key_usage"
     ;;
   showcsr)
     showcsr "$_csr" "$_domain"
@@ -8004,7 +8260,7 @@ _process() {
     createDomainKey "$_domain" "$_keylength"
     ;;
   createCSR)
-    createCSR "$_domain" "$_altdomains" "$_ecc"
+    createCSR "$_domain" "$_altdomains" "$_ecc" "$_extended_key_usage"
     ;;
   setnotify)
     setnotify "$_notify_hook" "$_notify_level" "$_notify_mode" "$_notify_source"
@@ -8015,6 +8271,9 @@ _process() {
   setdefaultchain)
     setdefaultchain "$_preferred_chain"
     ;;
+  list_profiles)
+    list_profiles
+    ;;
   *)
     if [ "$_CMD" ]; then
       _err "Invalid command: $_CMD"

deploy/ali_cdn.sh

@@ -83,6 +83,6 @@ _set_cdn_domain_ssl_certificate_query() {
   query=$query'&SignatureMethod=HMAC-SHA1'
   query=$query"&SignatureNonce=$(_ali_nonce)"
   query=$query'&SignatureVersion=1.0'
-  query=$query'&Timestamp='$(_timestamp)
+  query=$query'&Timestamp='$(_ali_timestamp)
   query=$query'&Version=2018-05-10'
 }

deploy/ali_dcdn.sh

@@ -83,6 +83,6 @@ _set_dcdn_domain_ssl_certificate_query() {
   query=$query'&SignatureMethod=HMAC-SHA1'
   query=$query"&SignatureNonce=$(_ali_nonce)"
   query=$query'&SignatureVersion=1.0'
-  query=$query'&Timestamp='$(_timestamp)
+  query=$query'&Timestamp='$(_ali_timestamp)
   query=$query'&Version=2018-01-15'
 }

deploy/byteplus_alb.sh

@@ -0,0 +1,394 @@
+#!/usr/bin/env sh
+# shellcheck disable=SC2034,SC2154
+#
+# acme.sh deploy hook: BytePlus Application Load Balancer (ALB)
+# https://github.com/acmesh-official/acme.sh/wiki/deployhooks
+#
+# Deploys SSL/TLS certificates issued by acme.sh to BytePlus ALB.
+# Supports automatic renewal with zero-downtime certificate rotation
+# for certificates that have already been uploaded and have a saved
+# BytePlus CertificateId.
+#
+# ┌─────────────────────────────────────────────────────────────────────┐
+# │  FIRST TIME (new domain)                                           │
+# │  1. acme.sh --issue  -d example.com -w /var/www/html/              │
+# │  2. Upload/import the certificate to BytePlus ALB manually         │
+# │  3. Save/configure the existing CertificateId for this hook        │
+# │  4. Manually assign cert to ALB Listener (one-time only)           │
+# │                                                                    │
+# │  RENEWAL (fully automatic after CertificateId is configured)       │
+# │  acme.sh cron triggers renew → deploy hook runs automatically      │
+# │  → ReplaceCertificate (UpdateMode=new) — single API call           │
+# │  → All attached listeners updated, old cert auto-deleted           │
+# └─────────────────────────────────────────────────────────────────────┘
+#
+# Required environment variables:
+#   export BYTEPLUS_ACCESS_KEY="AKAPxxxxxxxxxx"
+#   export BYTEPLUS_SECRET_KEY="your-secret-key"
+#
+# Optional environment variables:
+#   export BYTEPLUS_REGION="ap-southeast-3"            # default: ap-southeast-3
+#   export BYTEPLUS_HOST="alb.ap-southeast-3.byteplusapi.com"  # custom API host
+#   export BYTEPLUS_PROJECT_NAME="live"                 # default: "default" project
+#   export BYTEPLUS_CERT_NAME=""                        # default: acme-{domain}-{YYYYMMDD-HHMM}
+#   export BYTEPLUS_CERT_DESCRIPTION=""                 # default: empty
+#   export BYTEPLUS_DELETE_OLD_CERT="true"              # default: true — auto-delete after replace
+#
+# API notes:
+#   - All BytePlus ALB APIs use GET with query string parameters
+#   - Request signing: HMAC-SHA256 with signed headers host;x-date
+#   - PublicKey/PrivateKey are URL-encoded (RFC 3986) in query string
+#   - ReplaceCertificate with UpdateMode=new uploads + replaces in 1 call
+#
+# Dependencies: curl, openssl, awk (standard on most Linux)
+#
+# Docs:
+#   Signing — https://docs.byteplus.com/en/docs/byteplus-platform/reference-how-to-calculate-a-signature
+#   ALB API — https://docs.byteplus.com/en/docs/byteplus-alb
+
+# ══════════════════════════════════════════════════════════════════════════════
+#  Constants
+# ══════════════════════════════════════════════════════════════════════════════
+
+# SHA-256 hash of empty string (used for GET requests with no body)
+_BYTEPLUS_EMPTY_HASH="e3b0c44298fc1c149afbf4c8996fb92427ae41e4649b934ca495991b7852b855"
+
+# ══════════════════════════════════════════════════════════════════════════════
+#  Main deploy function — called by acme.sh
+# ══════════════════════════════════════════════════════════════════════════════
+
+byteplus_alb_deploy() {
+  _cdomain="$1"
+  _ckey="$2"
+  _ccert="$3"
+  _cca="$4"
+  _cfullchain="$5"
+
+  _debug _cdomain "$_cdomain"
+  _debug _ckey "$_ckey"
+  _debug _ccert "$_ccert"
+  _debug _cca "$_cca"
+  _debug _cfullchain "$_cfullchain"
+
+  # ── 1. Load & validate credentials ──────────────────────────────────────────
+
+  # Preserve environment values before _getdeployconf (which may reset them)
+  _env_project_name="${BYTEPLUS_PROJECT_NAME:-}"
+  _env_delete_old="${BYTEPLUS_DELETE_OLD_CERT:-}"
+
+  _getdeployconf BYTEPLUS_ACCESS_KEY
+  _getdeployconf BYTEPLUS_SECRET_KEY
+  _getdeployconf BYTEPLUS_REGION
+  _getdeployconf BYTEPLUS_HOST
+  _getdeployconf BYTEPLUS_PROJECT_NAME
+  _getdeployconf BYTEPLUS_DELETE_OLD_CERT
+  _getdeployconf BYTEPLUS_CERT_NAME
+
+  # Restore from environment if _getdeployconf cleared them
+  if [ -z "$BYTEPLUS_PROJECT_NAME" ] && [ -n "$_env_project_name" ]; then
+    _debug "Restoring BYTEPLUS_PROJECT_NAME from environment"
+    BYTEPLUS_PROJECT_NAME="$_env_project_name"
+  fi
+  if [ -z "$BYTEPLUS_DELETE_OLD_CERT" ] && [ -n "$_env_delete_old" ]; then
+    BYTEPLUS_DELETE_OLD_CERT="$_env_delete_old"
+  fi
+
+  # Validate required credentials
+  if [ -z "$BYTEPLUS_ACCESS_KEY" ]; then
+    _err "BYTEPLUS_ACCESS_KEY is not set."
+    _err "Please run: export BYTEPLUS_ACCESS_KEY=\"your-access-key\""
+    return 1
+  fi
+  if [ -z "$BYTEPLUS_SECRET_KEY" ]; then
+    _err "BYTEPLUS_SECRET_KEY is not set."
+    _err "Please run: export BYTEPLUS_SECRET_KEY=\"your-secret-key\""
+    return 1
+  fi
+
+  # Save credentials for future runs
+  _savedeployconf BYTEPLUS_ACCESS_KEY "$BYTEPLUS_ACCESS_KEY"
+  _savedeployconf BYTEPLUS_SECRET_KEY "$BYTEPLUS_SECRET_KEY"
+
+  # Region (default: ap-southeast-3)
+  BYTEPLUS_REGION="${BYTEPLUS_REGION:-ap-southeast-3}"
+  _savedeployconf BYTEPLUS_REGION "$BYTEPLUS_REGION"
+
+  # Project name
+  if [ -n "$BYTEPLUS_PROJECT_NAME" ]; then
+    _savedeployconf BYTEPLUS_PROJECT_NAME "$BYTEPLUS_PROJECT_NAME"
+    _info "Using project: $BYTEPLUS_PROJECT_NAME"
+  else
+    _info "WARNING: BYTEPLUS_PROJECT_NAME is not set. Cert will go to 'default' project."
+  fi
+
+  # Delete old cert toggle (default: true)
+  BYTEPLUS_DELETE_OLD_CERT="${BYTEPLUS_DELETE_OLD_CERT:-true}"
+  _savedeployconf BYTEPLUS_DELETE_OLD_CERT "$BYTEPLUS_DELETE_OLD_CERT"
+
+  # API host — custom override or auto-build from region
+  if [ -n "$BYTEPLUS_HOST" ]; then
+    _BYTEPLUS_HOST="$BYTEPLUS_HOST"
+    _savedeployconf BYTEPLUS_HOST "$BYTEPLUS_HOST"
+  else
+    _BYTEPLUS_HOST="alb.${BYTEPLUS_REGION}.byteplusapi.com"
+  fi
+  _info "Using API host: $_BYTEPLUS_HOST"
+  _BYTEPLUS_SERVICE="alb"
+
+  # ── 2. Build certificate name ────────────────────────────────────────────────
+
+  _date_tag=$(date -u +%Y%m%d-%H%M)
+  # Replace wildcard * and dots for a valid cert name
+  _safe_domain=$(echo "$_cdomain" | sed 's/\*\.//g' | sed 's/\./-/g')
+  # Safe identifier version for deployconf keys: map all non [A-Za-z0-9_] to _
+  _conf_key=$(echo "$_cdomain" | sed 's/^\*\.//' | sed 's/[^A-Za-z0-9_]/_/g')
+
+  if [ -z "$BYTEPLUS_CERT_NAME" ]; then
+    BYTEPLUS_CERT_NAME="acme-${_safe_domain}-${_date_tag}"
+  fi
+
+  # Enforce BytePlus naming rules: start with letter, max 128 chars
+  BYTEPLUS_CERT_NAME=$(echo "$BYTEPLUS_CERT_NAME" | sed 's/[^A-Za-z0-9._-]/-/g')
+  case "$BYTEPLUS_CERT_NAME" in
+  [A-Za-z]*) ;;
+
+  *)
+    BYTEPLUS_CERT_NAME="a$BYTEPLUS_CERT_NAME"
+    ;;
+  esac
+  BYTEPLUS_CERT_NAME=$(echo "$BYTEPLUS_CERT_NAME" | cut -c1-128)
+
+  _info "Certificate name: $BYTEPLUS_CERT_NAME"
+
+  # ── 3. Read cert and key ─────────────────────────────────────────────────────
+  # BytePlus requires NO blank lines between PEM blocks in the certificate chain
+
+  _public_key=$(sed '/^[[:space:]]*$/d' "$_cfullchain" | tr -d '\r')
+  _private_key=$(sed '/^[[:space:]]*$/d' "$_ckey" | tr -d '\r')
+
+  if [ -z "$_public_key" ] || [ -z "$_private_key" ]; then
+    _err "Failed to read certificate or key file."
+    return 1
+  fi
+
+  # ── 4. Deploy: first-time upload or renewal replace ─────────────────────────
+
+  _getdeployconf "BYTEPLUS_CERT_ID_${_conf_key}"
+  _old_cert_id=$(eval echo "\$BYTEPLUS_CERT_ID_${_conf_key}")
+
+  if [ -z "$_old_cert_id" ]; then
+    _byteplus_first_time_deploy
+  else
+    _byteplus_renewal_deploy
+  fi
+
+  # Check if deploy step set _new_cert_id
+  if [ -z "$_new_cert_id" ]; then
+    return 1
+  fi
+
+  # ── 5. Save new CertificateId for next renewal ───────────────────────────────
+
+  _savedeployconf "BYTEPLUS_CERT_ID_${_conf_key}" "$_new_cert_id"
+  _info "Saved CertificateId '$_new_cert_id' for domain '$_cdomain'."
+
+  return 0
+}
+
+# ══════════════════════════════════════════════════════════════════════════════
+#  Deploy: First time — UploadCertificate
+# ══════════════════════════════════════════════════════════════════════════════
+
+_byteplus_first_time_deploy() {
+  _info "No previous CertificateId found."
+  _err "Refusing to upload certificate material because this hook passes PublicKey/PrivateKey as request parameters."
+  _err "Uploading a private key in the request URL can leak it via logs, proxies, and process listings."
+  _err "Please upload the certificate to BytePlus manually for the initial deployment, set BYTEPLUS_CERT_ID_${_conf_key} to that CertificateId, and rerun."
+  _err "This hook stores CertificateId values per domain using deployconf, so the variable name must include the current domain-specific suffix."
+  _err "This hook must be updated to send PublicKey and PrivateKey in a POST body before automatic first-time upload can be enabled safely."
+  return 1
+}
+
+# ══════════════════════════════════════════════════════════════════════════════
+#  Deploy: Renewal — ReplaceCertificate (UpdateMode=new)
+# ══════════════════════════════════════════════════════════════════════════════
+
+_byteplus_renewal_deploy() {
+  _info "Replacing old certificate '$_old_cert_id' (UpdateMode=new)..."
+  _err "Refusing to replace certificate material because this hook passes PublicKey/PrivateKey as request parameters."
+  _err "Uploading a private key in the request URL can leak it via logs, proxies, and process listings."
+  _err "Please replace the certificate in BytePlus manually for renewal until this hook is updated to send PublicKey and PrivateKey in a POST body safely."
+  return 1
+}
+
+# ══════════════════════════════════════════════════════════════════════════════
+#  Delete old certificate (with retry)
+# ══════════════════════════════════════════════════════════════════════════════
+
+_byteplus_delete_old_cert() {
+  _del_cert_id="$1"
+
+  _info "Waiting 5s for cert status to settle..."
+  _sleep 5
+
+  _info "Deleting old certificate '$_del_cert_id'..."
+  _del_response=$(_byteplus_alb_api "DeleteCertificate" "CertificateId=${_del_cert_id}")
+
+  if echo "$_del_response" | grep -q '"Error"'; then
+    _info "Delete failed, retrying in 10s..."
+    _sleep 10
+    _del_response=$(_byteplus_alb_api "DeleteCertificate" "CertificateId=${_del_cert_id}")
+
+    if echo "$_del_response" | grep -q '"Error"'; then
+      _info "Warning: Could not delete old certificate '$_del_cert_id'."
+      _info "Error: $(_byteplus_extract_error "$_del_response")"
+      _info "Please remove it manually from BytePlus Console."
+    else
+      _info "Old certificate '$_del_cert_id' deleted (retry succeeded)."
+    fi
+  else
+    _info "Old certificate '$_del_cert_id' deleted."
+  fi
+}
+
+# ══════════════════════════════════════════════════════════════════════════════
+#  JSON response helpers
+# ══════════════════════════════════════════════════════════════════════════════
+
+# Extract CertificateId from API response JSON
+_byteplus_extract_cert_id() {
+  echo "$1" | _egrep_o '"CertificateId"\s*:\s*"[^"]*"' | head -1 | _egrep_o '"[^"]*"$' | tr -d '"'
+}
+
+# Extract error message from API response JSON
+_byteplus_extract_error() {
+  _code=$(echo "$1" | _egrep_o '"Code"\s*:\s*"[^"]*"' | head -1 | _egrep_o '"[^"]*"$' | tr -d '"')
+  _msg=$(echo "$1" | _egrep_o '"Message"\s*:\s*"[^"]*"' | head -1 | _egrep_o '"[^"]*"$' | tr -d '"')
+  if [ -n "$_code" ]; then
+    printf '%s — %s' "$_code" "$_msg"
+  else
+    printf '%s' "$1"
+  fi
+}
+
+# ══════════════════════════════════════════════════════════════════════════════
+#  BytePlus ALB API caller
+# ══════════════════════════════════════════════════════════════════════════════
+
+# Usage: _byteplus_alb_api ACTION [param1=val1] [param2=val2] ...
+# All parameters sent via GET query string. Signing: HMAC-SHA256, host;x-date.
+_byteplus_alb_api() {
+  _action="$1"
+  shift
+
+  # Build query string — all params go in URL
+  _query_params="Action=${_action}&Version=2020-04-01"
+
+  for _param in "$@"; do
+    _pname="${_param%%=*}"
+    _pval="${_param#*=}"
+    _query_params="${_query_params}&${_pname}=$(_byteplus_urlencode "$_pval")"
+  done
+
+  # Timestamps
+  _x_date=$(date -u +%Y%m%dT%H%M%SZ)
+  _date_only=$(date -u +%Y%m%d)
+
+  # Sort query params for canonical request
+  _sorted_query=$(echo "$_query_params" | tr '&' '\n' | LC_ALL=C sort | tr '\n' '&' | sed 's/&$//')
+
+  # Canonical headers — only host and x-date
+  _canonical_headers="host:${_BYTEPLUS_HOST}
+x-date:${_x_date}
+"
+  _signed_headers="host;x-date"
+
+  # Canonical request
+  _canonical_request="GET
+/
+${_sorted_query}
+${_canonical_headers}
+${_signed_headers}
+${_BYTEPLUS_EMPTY_HASH}"
+
+  # Do not log _canonical_request because the query string may contain
+  # URL-encoded certificate or private key material.
+
+  # Hash of canonical request
+  # _digest is provided by acme.sh and works across OpenSSL versions.
+  _cr_hash=$(printf '%s' "$_canonical_request" | _digest sha256 hex)
+
+  # Credential scope
+  _credential_scope="${_date_only}/${BYTEPLUS_REGION}/${_BYTEPLUS_SERVICE}/request"
+
+  # String to sign
+  _string_to_sign="HMAC-SHA256
+${_x_date}
+${_credential_scope}
+${_cr_hash}"
+
+  _debug2 _string_to_sign "$_string_to_sign"
+
+  # Signing key derivation (HMAC chain)
+  # _hmac <algo> <hex-key> reads data from stdin and returns a hex digest.
+  # acme.sh's _hmac abstracts away OpenSSL version differences, so this works
+  # on both modern (-mac HMAC -macopt hexkey:) and older (-hmac) OpenSSL builds.
+  #
+  # The first step seeds the chain from the raw secret key, so we convert it
+  # to hex first with _hex_dump (also an acme.sh built-in).
+  _secret_hex=$(printf '%s' "$BYTEPLUS_SECRET_KEY" | _hex_dump | tr -d ' \n')
+  _k_date=$(printf '%s' "$_date_only" | _hmac sha256 "$_secret_hex" hex)
+  _k_region=$(printf '%s' "$BYTEPLUS_REGION" | _hmac sha256 "$_k_date" hex)
+  _k_service=$(printf '%s' "$_BYTEPLUS_SERVICE" | _hmac sha256 "$_k_region" hex)
+  _k_signing=$(printf '%s' "request" | _hmac sha256 "$_k_service" hex)
+
+  # Final signature
+  _signature=$(printf '%s' "$_string_to_sign" | _hmac sha256 "$_k_signing" hex)
+
+  # Authorization header
+  _auth="HMAC-SHA256 Credential=${BYTEPLUS_ACCESS_KEY}/${_credential_scope}, SignedHeaders=${_signed_headers}, Signature=${_signature}"
+
+  _secure_debug2 _auth "$_auth"
+
+  # Send request parameters in the POST body instead of the URL query string.
+  # This avoids exposing sensitive or large values in debug-logged URLs and
+  # reduces the risk of exceeding URL length limits.
+  _url="https://${_BYTEPLUS_HOST}/"
+  _body="$_sorted_query"
+
+  _saved_H1="${_H1:-}"
+  _saved_H2="${_H2:-}"
+  _saved_H3="${_H3:-}"
+  _saved_H4="${_H4:-}"
+  _saved_H5="${_H5:-}"
+
+  _H1="Authorization: ${_auth}"
+  _H2="X-Date: ${_x_date}"
+  _H3="Host: ${_BYTEPLUS_HOST}"
+  _H4="Content-Type: application/x-www-form-urlencoded"
+  _H5=""
+
+  _response="$(_post "$_body" "$_url" "" "POST")"
+  _request_ret="$?"
+
+  _H1="$_saved_H1"
+  _H2="$_saved_H2"
+  _H3="$_saved_H3"
+  _H4="$_saved_H4"
+  _H5="$_saved_H5"
+
+  if [ "$_request_ret" != "0" ]; then
+    _err "byteplus_alb_api request failed for [$_action]"
+    return 1
+  fi
+  _debug2 "_byteplus_alb_api response [$_action]" "$_response"
+  printf '%s' "$_response"
+}
+
+# ══════════════════════════════════════════════════════════════════════════════
+#  URL encode (RFC 3986)
+# ══════════════════════════════════════════════════════════════════════════════
+
+_byteplus_urlencode() {
+  printf '%s' "$1" | _url_encode
+}

deploy/cachefly.sh

@@ -0,0 +1,56 @@
+#!/usr/bin/env sh
+
+# Script to deploy certificate to CacheFly
+# https://api.cachefly.com/api/2.5/docs#tag/Certificates/paths/~1certificates/post
+
+# This deployment required following variables
+# export CACHEFLY_TOKEN="Your CacheFly API Token"
+
+# returns 0 means success, otherwise error.
+
+########  Public functions #####################
+
+#domain keyfile certfile cafile fullchain
+CACHEFLY_API_BASE="https://api.cachefly.com/api/2.5"
+
+cachefly_deploy() {
+  _cdomain="$1"
+  _ckey="$2"
+  _ccert="$3"
+  _cca="$4"
+  _cfullchain="$5"
+
+  _debug _cdomain "$_cdomain"
+  _debug _ckey "$_ckey"
+  _debug _ccert "$_ccert"
+  _debug _cca "$_cca"
+  _debug _cfullchain "$_cfullchain"
+
+  if [ -z "$CACHEFLY_TOKEN" ]; then
+    _err "CACHEFLY_TOKEN is not defined."
+    return 1
+  else
+    _savedomainconf CACHEFLY_TOKEN "$CACHEFLY_TOKEN"
+  fi
+
+  _info "Deploying certificate to CacheFly..."
+
+  ## upload certificate
+  string_fullchain=$(sed 's/$/\\n/' "$_cfullchain" | tr -d '\n')
+  string_key=$(sed 's/$/\\n/' "$_ckey" | tr -d '\n')
+
+  _request_body="{\"certificate\":\"$string_fullchain\",\"certificateKey\":\"$string_key\"}"
+  _debug _request_body "$_request_body"
+  _debug CACHEFLY_TOKEN "$CACHEFLY_TOKEN"
+  export _H1="Authorization: Bearer $CACHEFLY_TOKEN"
+  _response=$(_post "$_request_body" "$CACHEFLY_API_BASE/certificates" "" "POST" "application/json")
+
+  if _contains "$_response" "message"; then
+    _err "Error in deploying $_cdomain certificate to CacheFly."
+    _err "$_response"
+    return 1
+  fi
+  _debug response "$_response"
+  _info "Domain $_cdomain certificate successfully deployed to CacheFly."
+  return 0
+}

deploy/directadmin.sh

@@ -0,0 +1,86 @@
+#!/usr/bin/env sh
+
+# Script to deploy certificate to DirectAdmin
+# https://docs.directadmin.com/directadmin/customizing-workflow/api-all-about.html#creating-a-login-key
+# https://docs.directadmin.com/changelog/version-1.24.4.html#cmd-api-catch-all-pop-passwords-frontpage-protected-dirs-ssl-certs
+
+# This deployment required following variables
+# export DirectAdmin_SCHEME="https" # Optional, https or http, defaults to https
+# export DirectAdmin_ENDPOINT="example.com:2222"
+# export DirectAdmin_USERNAME="Your DirectAdmin Username"
+# export DirectAdmin_KEY="Your DirectAdmin Login Key or Password"
+# export DirectAdmin_MAIN_DOMAIN="Your DirectAdmin Main Domain, NOT Subdomain"
+
+# returns 0 means success, otherwise error.
+
+########  Public functions #####################
+
+#domain keyfile certfile cafile fullchain
+directadmin_deploy() {
+  _cdomain="$1"
+  _ckey="$2"
+  _ccert="$3"
+  _cca="$4"
+  _cfullchain="$5"
+
+  _debug _cdomain "$_cdomain"
+  _debug _ckey "$_ckey"
+  _debug _ccert "$_ccert"
+  _debug _cca "$_cca"
+  _debug _cfullchain "$_cfullchain"
+
+  if [ -z "$DirectAdmin_ENDPOINT" ]; then
+    _err "DirectAdmin_ENDPOINT is not defined."
+    return 1
+  else
+    _savedomainconf DirectAdmin_ENDPOINT "$DirectAdmin_ENDPOINT"
+  fi
+  if [ -z "$DirectAdmin_USERNAME" ]; then
+    _err "DirectAdmin_USERNAME is not defined."
+    return 1
+  else
+    _savedomainconf DirectAdmin_USERNAME "$DirectAdmin_USERNAME"
+  fi
+  if [ -z "$DirectAdmin_KEY" ]; then
+    _err "DirectAdmin_KEY is not defined."
+    return 1
+  else
+    _savedomainconf DirectAdmin_KEY "$DirectAdmin_KEY"
+  fi
+  if [ -z "$DirectAdmin_MAIN_DOMAIN" ]; then
+    _err "DirectAdmin_MAIN_DOMAIN is not defined."
+    return 1
+  else
+    _savedomainconf DirectAdmin_MAIN_DOMAIN "$DirectAdmin_MAIN_DOMAIN"
+  fi
+
+  # Optional SCHEME
+  _getdeployconf DirectAdmin_SCHEME
+  # set default values for DirectAdmin_SCHEME
+  [ -n "${DirectAdmin_SCHEME}" ] || DirectAdmin_SCHEME="https"
+
+  _info "Deploying certificate to DirectAdmin..."
+
+  # upload certificate
+  string_cfullchain=$(sed 's/$/\\n/' "$_cfullchain" | tr -d '\n')
+  string_key=$(sed 's/$/\\n/' "$_ckey" | tr -d '\n')
+
+  _request_body="{\"domain\":\"$DirectAdmin_MAIN_DOMAIN\",\"action\":\"save\",\"type\":\"paste\",\"certificate\":\"$string_key\n$string_cfullchain\n\"}"
+  _debug _request_body "$_request_body"
+  _debug DirectAdmin_ENDPOINT "$DirectAdmin_ENDPOINT"
+  _debug DirectAdmin_USERNAME "$DirectAdmin_USERNAME"
+  _debug DirectAdmin_KEY "$DirectAdmin_KEY"
+  _debug DirectAdmin_MAIN_DOMAIN "$DirectAdmin_MAIN_DOMAIN"
+  _response=$(_post "$_request_body" "$DirectAdmin_SCHEME://$DirectAdmin_USERNAME:$DirectAdmin_KEY@$DirectAdmin_ENDPOINT/CMD_API_SSL" "" "POST" "application/json")
+
+  if _contains "$_response" "error=1"; then
+    _err "Error in deploying $_cdomain certificate to DirectAdmin Domain $DirectAdmin_MAIN_DOMAIN."
+    _err "$_response"
+    return 1
+  fi
+
+  _info "$_response"
+  _info "Domain $_cdomain certificate successfully deployed to DirectAdmin Domain $DirectAdmin_MAIN_DOMAIN."
+
+  return 0
+}

deploy/edgio.sh

@@ -0,0 +1,86 @@
+#!/usr/bin/env sh
+
+# Here is a script to deploy cert to edgio using its API
+# https://docs.edg.io/guides/v7/develop/rest_api/authentication
+# https://docs.edg.io/rest_api/#tag/tls-certs/operation/postConfigV01TlsCerts
+
+# This deployment required following variables
+# export EDGIO_CLIENT_ID="Your Edgio Client ID"
+# export EDGIO_CLIENT_SECRET="Your Edgio Client Secret"
+# export EDGIO_ENVIRONMENT_ID="Your Edgio Environment ID"
+
+# If have more than one Environment ID
+# export EDGIO_ENVIRONMENT_ID="ENVIRONMENT_ID_1 ENVIRONMENT_ID_2"
+
+# returns 0 means success, otherwise error.
+
+########  Public functions #####################
+
+#domain keyfile certfile cafile fullchain
+edgio_deploy() {
+  _cdomain="$1"
+  _ckey="$2"
+  _ccert="$3"
+  _cca="$4"
+  _cfullchain="$5"
+
+  _debug _cdomain "$_cdomain"
+  _debug _ckey "$_ckey"
+  _debug _ccert "$_ccert"
+  _debug _cca "$_cca"
+  _debug _cfullchain "$_cfullchain"
+
+  if [ -z "$EDGIO_CLIENT_ID" ]; then
+    _err "EDGIO_CLIENT_ID is not defined."
+    return 1
+  else
+    _savedomainconf EDGIO_CLIENT_ID "$EDGIO_CLIENT_ID"
+  fi
+
+  if [ -z "$EDGIO_CLIENT_SECRET" ]; then
+    _err "EDGIO_CLIENT_SECRET is not defined."
+    return 1
+  else
+    _savedomainconf EDGIO_CLIENT_SECRET "$EDGIO_CLIENT_SECRET"
+  fi
+
+  if [ -z "$EDGIO_ENVIRONMENT_ID" ]; then
+    _err "EDGIO_ENVIRONMENT_ID is not defined."
+    return 1
+  else
+    _savedomainconf EDGIO_ENVIRONMENT_ID "$EDGIO_ENVIRONMENT_ID"
+  fi
+
+  _info "Getting access token"
+  _data="client_id=$EDGIO_CLIENT_ID&client_secret=$EDGIO_CLIENT_SECRET&grant_type=client_credentials&scope=app.config"
+  _debug Get_access_token_data "$_data"
+  _response=$(_post "$_data" "https://id.edgio.app/connect/token" "" "POST" "application/x-www-form-urlencoded")
+  _debug Get_access_token_response "$_response"
+  _access_token=$(echo "$_response" | _json_decode | _egrep_o '"access_token":"[^"]*' | cut -d : -f 2 | tr -d '"')
+  _debug _access_token "$_access_token"
+  if [ -z "$_access_token" ]; then
+    _err "Error in getting access token"
+    return 1
+  fi
+
+  _info "Uploading certificate"
+  string_ccert=$(sed 's/$/\\n/' "$_ccert" | tr -d '\n')
+  string_cca=$(sed 's/$/\\n/' "$_cca" | tr -d '\n')
+  string_key=$(sed 's/$/\\n/' "$_ckey" | tr -d '\n')
+
+  for ENVIRONMENT_ID in $EDGIO_ENVIRONMENT_ID; do
+    _data="{\"environment_id\":\"$ENVIRONMENT_ID\",\"primary_cert\":\"$string_ccert\",\"intermediate_cert\":\"$string_cca\",\"private_key\":\"$string_key\"}"
+    _debug Upload_certificate_data "$_data"
+    _H1="Authorization: Bearer $_access_token"
+    _response=$(_post "$_data" "https://edgioapis.com/config/v0.1/tls-certs" "" "POST" "application/json")
+    if _contains "$_response" "message"; then
+      _err "Error in deploying $_cdomain certificate to Edgio ENVIRONMENT_ID $ENVIRONMENT_ID."
+      _err "$_response"
+      return 1
+    fi
+    _debug Upload_certificate_response "$_response"
+    _info "Domain $_cdomain certificate successfully deployed to Edgio ENVIRONMENT_ID $ENVIRONMENT_ID."
+  done
+
+  return 0
+}

deploy/kemplm.sh

@@ -0,0 +1,99 @@
+#!/usr/bin/env sh
+
+#Here is a script to deploy cert to a Kemp Loadmaster.
+
+#returns 0 means success, otherwise error.
+
+#DEPLOY_KEMP_TOKEN="token"
+#DEPLOY_KEMP_URL="https://kemplm.example.com"
+
+########  Public functions #####################
+
+#domain keyfile certfile cafile fullchain
+kemplm_deploy() {
+  _domain="$1"
+  _key_file="$2"
+  _cert_file="$3"
+  _ca_file="$4"
+  _fullchain_file="$5"
+
+  _debug _domain "$_domain"
+  _debug _key_file "$_key_file"
+  _debug _cert_file "$_cert_file"
+  _debug _ca_file "$_ca_file"
+  _debug _fullchain_file "$_fullchain_file"
+
+  if ! _exists jq; then
+    _err "jq not found"
+    return 1
+  fi
+
+  # Rename wildcard certs, kemp accepts only alphanumeric names so we delete '*.' from filename
+  _kemp_domain=$(echo "${_domain}" | sed 's/\*\.//')
+  _debug _kemp_domain "$_kemp_domain"
+
+  # Read config from saved values or env
+  _getdeployconf DEPLOY_KEMP_TOKEN
+  _getdeployconf DEPLOY_KEMP_URL
+
+  _debug DEPLOY_KEMP_URL "$DEPLOY_KEMP_URL"
+  _secure_debug DEPLOY_KEMP_TOKEN "$DEPLOY_KEMP_TOKEN"
+
+  if [ -z "$DEPLOY_KEMP_TOKEN" ]; then
+    _err "Kemp Loadmaster token is not found, please define DEPLOY_KEMP_TOKEN."
+    return 1
+  fi
+  if [ -z "$DEPLOY_KEMP_URL" ]; then
+    _err "Kemp Loadmaster URL is not found, please define DEPLOY_KEMP_URL."
+    return 1
+  fi
+
+  # Save current values
+  _savedeployconf DEPLOY_KEMP_TOKEN "$DEPLOY_KEMP_TOKEN"
+  _savedeployconf DEPLOY_KEMP_URL "$DEPLOY_KEMP_URL"
+
+  # Check if certificate is already installed
+  _info "Check if certificate is already present"
+  _list_request="{\"cmd\": \"listcert\", \"apikey\": \"${DEPLOY_KEMP_TOKEN}\"}"
+  _debug3 _list_request "${_list_request}"
+  _kemp_cert_count=$(HTTPS_INSECURE=1 _post "${_list_request}" "${DEPLOY_KEMP_URL}/accessv2" | jq -r '.cert[] | .name' | grep -c "^${_kemp_domain}$")
+  _debug2 _kemp_cert_count "${_kemp_cert_count}"
+
+  _kemp_replace_cert=1
+  if [ "${_kemp_cert_count}" -eq 0 ]; then
+    _kemp_replace_cert=0
+    _info "Certificate does not exist on Kemp Loadmaster"
+  else
+    _info "Certificate already exists on Kemp Loadmaster"
+  fi
+  _debug _kemp_replace_cert "${_kemp_replace_cert}"
+
+  # Upload new certificate to Kemp Loadmaster
+  _kemp_upload_cert=$(_mktemp)
+  cat "${_fullchain_file}" "${_key_file}" | base64 | tr -d '\n' >"${_kemp_upload_cert}"
+
+  _info "Uploading certificate to Kemp Loadmaster"
+  _add_data=$(cat "${_kemp_upload_cert}")
+  _add_request="{\"cmd\": \"addcert\", \"apikey\": \"${DEPLOY_KEMP_TOKEN}\", \"replace\": ${_kemp_replace_cert}, \"cert\": \"${_kemp_domain}\", \"data\": \"${_add_data}\"}"
+  _debug3 _add_request "${_add_request}"
+  _kemp_post_result=$(HTTPS_INSECURE=1 _post "${_add_request}" "${DEPLOY_KEMP_URL}/accessv2")
+  _retval=$?
+  _debug2 _kemp_post_result "${_kemp_post_result}"
+  if [ "${_retval}" -eq 0 ]; then
+    _kemp_post_status=$(echo "${_kemp_post_result}" | jq -r '.status')
+    _kemp_post_message=$(echo "${_kemp_post_result}" | jq -r '.message')
+    if [ "${_kemp_post_status}" = "ok" ]; then
+      _info "Upload successful"
+    else
+      _err "Upload failed: ${_kemp_post_message}"
+      _retval=1
+    fi
+  else
+    _err "Upload failed"
+    _retval=1
+  fi
+
+  rm "${_kemp_upload_cert}"
+
+  return $_retval
+}

deploy/keyhelp.sh

@@ -0,0 +1,131 @@
+#!/usr/bin/env sh
+
+# Script to deploy certificate to KeyHelp
+# This deployment required following variables
+# export DEPLOY_KEYHELP_BASEURL="https://keyhelp.example.com"
+# export DEPLOY_KEYHELP_USERNAME="Your KeyHelp Username"
+# export DEPLOY_KEYHELP_PASSWORD="Your KeyHelp Password"
+# export DEPLOY_KEYHELP_DOMAIN_ID="Depoly certificate to this Domain ID"
+
+# Open the 'Edit domain' page, and you will see id=xxx at the end of the URL. This is the Domain ID.
+# https://DEPLOY_KEYHELP_BASEURL/index.php?page=domains&action=edit&id=xxx
+
+# If have more than one domain name
+# export DEPLOY_KEYHELP_DOMAIN_ID="111 222 333"
+
+keyhelp_deploy() {
+  _cdomain="$1"
+  _ckey="$2"
+  _ccert="$3"
+  _cca="$4"
+  _cfullchain="$5"
+
+  _debug _cdomain "$_cdomain"
+  _debug _ckey "$_ckey"
+  _debug _ccert "$_ccert"
+  _debug _cca "$_cca"
+  _debug _cfullchain "$_cfullchain"
+
+  if [ -z "$DEPLOY_KEYHELP_BASEURL" ]; then
+    _err "DEPLOY_KEYHELP_BASEURL is not defined."
+    return 1
+  else
+    _savedomainconf DEPLOY_KEYHELP_BASEURL "$DEPLOY_KEYHELP_BASEURL"
+  fi
+
+  if [ -z "$DEPLOY_KEYHELP_USERNAME" ]; then
+    _err "DEPLOY_KEYHELP_USERNAME is not defined."
+    return 1
+  else
+    _savedomainconf DEPLOY_KEYHELP_USERNAME "$DEPLOY_KEYHELP_USERNAME"
+  fi
+
+  if [ -z "$DEPLOY_KEYHELP_PASSWORD" ]; then
+    _err "DEPLOY_KEYHELP_PASSWORD is not defined."
+    return 1
+  else
+    _savedomainconf DEPLOY_KEYHELP_PASSWORD "$DEPLOY_KEYHELP_PASSWORD"
+  fi
+
+  if [ -z "$DEPLOY_KEYHELP_DOMAIN_ID" ]; then
+    _err "DEPLOY_KEYHELP_DOMAIN_ID is not defined."
+    return 1
+  else
+    _savedomainconf DEPLOY_KEYHELP_DOMAIN_ID "$DEPLOY_KEYHELP_DOMAIN_ID"
+  fi
+
+  # Optional DEPLOY_KEYHELP_ENFORCE_HTTPS
+  _getdeployconf DEPLOY_KEYHELP_ENFORCE_HTTPS
+  # set default values for DEPLOY_KEYHELP_ENFORCE_HTTPS
+  [ -n "${DEPLOY_KEYHELP_ENFORCE_HTTPS}" ] || DEPLOY_KEYHELP_ENFORCE_HTTPS="1"
+
+  _info "Logging in to keyhelp panel"
+  username_encoded="$(printf "%s" "${DEPLOY_KEYHELP_USERNAME}" | _url_encode)"
+  password_encoded="$(printf "%s" "${DEPLOY_KEYHELP_PASSWORD}" | _url_encode)"
+  _H1="Content-Type: application/x-www-form-urlencoded"
+  _response=$(_get "$DEPLOY_KEYHELP_BASEURL/index.php?submit=1&username=$username_encoded&password=$password_encoded" "TRUE")
+  _cookie="$(grep -i '^set-cookie:' "$HTTP_HEADER" | _head_n 1 | cut -d " " -f 2)"
+
+  # If cookies is not empty then logon successful
+  if [ -z "$_cookie" ]; then
+    _err "Fail to get cookie."
+    return 1
+  fi
+  _debug "cookie" "$_cookie"
+
+  _info "Uploading certificate"
+  _date=$(date +"%Y%m%d")
+  encoded_key="$(_url_encode <"$_ckey")"
+  encoded_ccert="$(_url_encode <"$_ccert")"
+  encoded_cca="$(_url_encode <"$_cca")"
+  certificate_name="$_cdomain-$_date"
+
+  _request_body="submit=1&certificate_name=$certificate_name&add_type=upload&text_private_key=$encoded_key&text_certificate=$encoded_ccert&text_ca_certificate=$encoded_cca"
+  _H1="Cookie: $_cookie"
+  _response=$(_post "$_request_body" "$DEPLOY_KEYHELP_BASEURL/index.php?page=ssl_certificates&action=add" "" "POST")
+  _message=$(echo "$_response" | grep -A 2 'message-body' | sed -n '/<div class="message-body ">/,/<\/div>/{//!p;}' | sed 's/<[^>]*>//g' | sed 's/^ *//;s/ *$//')
+  _info "_message" "$_message"
+  if [ -z "$_message" ]; then
+    _err "Fail to upload certificate."
+    return 1
+  fi
+
+  for DOMAIN_ID in $DEPLOY_KEYHELP_DOMAIN_ID; do
+    _info "Apply certificate to domain id $DOMAIN_ID"
+    _response=$(_get "$DEPLOY_KEYHELP_BASEURL/index.php?page=domains&action=edit&id=$DOMAIN_ID")
+    cert_value=$(echo "$_response" | grep "$certificate_name" | sed -n 's/.*value="\([^"]*\).*/\1/p')
+    target_type=$(echo "$_response" | grep 'target_type' | grep 'checked' | sed -n 's/.*value="\([^"]*\).*/\1/p')
+    if [ "$target_type" = "directory" ]; then
+      path=$(echo "$_response" | awk '/name="path"/{getline; print}' | sed -n 's/.*value="\([^"]*\).*/\1/p')
+    fi
+    echo "$_response" | grep "is_prefer_https" | grep "checked" >/dev/null
+    if [ $? -eq 0 ]; then
+      is_prefer_https=1
+    else
+      is_prefer_https=0
+    fi
+    echo "$_response" | grep "hsts_enabled" | grep "checked" >/dev/null
+    if [ $? -eq 0 ]; then
+      hsts_enabled=1
+    else
+      hsts_enabled=0
+    fi
+    _debug "cert_value" "$cert_value"
+    if [ -z "$cert_value" ]; then
+      _err "Fail to get certificate id."
+      return 1
+    fi
+
+    _request_body="submit=1&id=$DOMAIN_ID&target_type=$target_type&path=$path&is_prefer_https=$is_prefer_https&hsts_enabled=$hsts_enabled&certificate_type=custom&certificate_id=$cert_value&enforce_https=$DEPLOY_KEYHELP_ENFORCE_HTTPS"
+    _response=$(_post "$_request_body" "$DEPLOY_KEYHELP_BASEURL/index.php?page=domains&action=edit" "" "POST")
+    _message=$(echo "$_response" | grep -A 2 'message-body' | sed -n '/<div class="message-body ">/,/<\/div>/{//!p;}' | sed 's/<[^>]*>//g' | sed 's/^ *//;s/ *$//')
+    _info "_message" "$_message"
+    if [ -z "$_message" ]; then
+      _err "Fail to apply certificate."
+      return 1
+    fi
+  done
+
+  _info "Domain $_cdomain certificate successfully deployed to KeyHelp Domain ID $DEPLOY_KEYHELP_DOMAIN_ID."
+  return 0
+}

deploy/keyhelp_api.sh

@@ -0,0 +1,86 @@
+#!/usr/bin/env sh
+
+keyhelp_api_deploy() {
+  _cdomain="$1"
+  _ckey="$2"
+  _ccert="$3"
+  _cca="$4"
+
+  _debug _cdomain "$_cdomain"
+  _debug _ckey "$_ckey"
+  _debug _ccert "$_ccert"
+  _debug _cca "$_cca"
+
+  # Read config from saved values or env
+  _getdeployconf DEPLOY_KEYHELP_HOST
+  _getdeployconf DEPLOY_KEYHELP_API_KEY
+
+  _debug DEPLOY_KEYHELP_HOST "$DEPLOY_KEYHELP_HOST"
+  _secure_debug DEPLOY_KEYHELP_API_KEY "$DEPLOY_KEYHELP_API_KEY"
+
+  if [ -z "$DEPLOY_KEYHELP_HOST" ]; then
+    _err "KeyHelp host not found, please define DEPLOY_KEYHELP_HOST."
+    return 1
+  fi
+  if [ -z "$DEPLOY_KEYHELP_API_KEY" ]; then
+    _err "KeyHelp api key not found, please define DEPLOY_KEYHELP_API_KEY."
+    return 1
+  fi
+
+  # Save current values
+  _savedeployconf DEPLOY_KEYHELP_HOST "$DEPLOY_KEYHELP_HOST"
+  _savedeployconf DEPLOY_KEYHELP_API_KEY "$DEPLOY_KEYHELP_API_KEY"
+
+  _request_key="$(tr '\n' ':' <"$_ckey" | sed 's/:/\\n/g')"
+  _request_cert="$(tr '\n' ':' <"$_ccert" | sed 's/:/\\n/g')"
+  _request_ca="$(tr '\n' ':' <"$_cca" | sed 's/:/\\n/g')"
+
+  _request_body="{
+    \"name\": \"$_cdomain\",
+    \"components\": {
+      \"private_key\": \"$_request_key\",
+      \"certificate\": \"$_request_cert\",
+      \"ca_certificate\": \"$_request_ca\"
+    }
+  }"
+
+  _hosts="$(echo "$DEPLOY_KEYHELP_HOST" | tr "," " ")"
+  _keys="$(echo "$DEPLOY_KEYHELP_API_KEY" | tr "," " ")"
+  _i=1
+
+  for _host in $_hosts; do
+    _key="$(_getfield "$_keys" "$_i" " ")"
+    _i="$(_math "$_i" + 1)"
+
+    export _H1="X-API-Key: $_key"
+
+    _put_url="$_host/api/v2/certificates/name/$_cdomain"
+    if _post "$_request_body" "$_put_url" "" "PUT" "application/json" >/dev/null; then
+      _code="$(grep "^HTTP" "$HTTP_HEADER" | _tail_n 1 | cut -d " " -f 2 | tr -d "\r\n")"
+    else
+      _err "Cannot make PUT request to $_put_url"
+      return 1
+    fi
+
+    if [ "$_code" = "404" ]; then
+      _info "$_cdomain not found, creating new entry at $_host"
+
+      _post_url="$_host/api/v2/certificates"
+      if _post "$_request_body" "$_post_url" "" "POST" "application/json" >/dev/null; then
+        _code="$(grep "^HTTP" "$HTTP_HEADER" | _tail_n 1 | cut -d " " -f 2 | tr -d "\r\n")"
+      else
+        _err "Cannot make POST request to $_post_url"
+        return 1
+      fi
+    fi
+
+    if _startswith "$_code" "2"; then
+      _info "$_cdomain set at $_host"
+    else
+      _err "HTTP status code is $_code"
+      return 1
+    fi
+  done
+
+  return 0
+}

deploy/localcopy.sh

@@ -0,0 +1,157 @@
+#!/usr/bin/env sh
+
+# Deploy-hook to very simply copy files to set directories and then
+# execute whatever reloadcmd the admin needs afterwards. This can be
+# useful for configurations where the "multideploy" hook (in development)
+# is used or when an admin wants ACME.SH to renew certs but needs to
+# manually configure deployment via an external script
+# (e.g. The deploy-freenas script for TrueNAS Core/Scale
+# https://github.com/danb35/deploy-freenas/ )
+#
+# If the same file is configured for the certificate key
+# and the certificate and/or full chain, a combined PEM file will
+# be output instead.
+#
+# Environment variables to be utilized are as follows:
+#
+# DEPLOY_LOCALCOPY_CERTKEY - /path/to/target/cert.key
+# DEPLOY_LOCALCOPY_CERTIFICATE - /path/to/target/cert.cer
+# DEPLOY_LOCALCOPY_FULLCHAIN - /path/to/target/fullchain.cer
+# DEPLOY_LOCALCOPY_CA - /path/to/target/ca.cer
+# DEPLOY_LOCALCOPY_PFX - /path/to/target/cert.pfx
+# DEPLOY_LOCALCOPY_RELOADCMD - "echo 'this is my cmd'"
+
+########  Public functions #####################
+
+#domain keyfile certfile cafile fullchain
+localcopy_deploy() {
+  _cdomain="$1"
+  _ckey="$2"
+  _ccert="$3"
+  _cca="$4"
+  _cfullchain="$5"
+  _cpfx="$6"
+
+  _debug _cdomain "$_cdomain"
+  _debug _ckey "$_ckey"
+  _debug _ccert "$_ccert"
+  _debug _cca "$_cca"
+  _debug _cfullchain "$_cfullchain"
+  _debug _cpfx "$_cpfx"
+
+  _getdeployconf DEPLOY_LOCALCOPY_CERTIFICATE
+  _getdeployconf DEPLOY_LOCALCOPY_CERTKEY
+  _getdeployconf DEPLOY_LOCALCOPY_FULLCHAIN
+  _getdeployconf DEPLOY_LOCALCOPY_CA
+  _getdeployconf DEPLOY_LOCALCOPY_RELOADCMD
+  _getdeployconf DEPLOY_LOCALCOPY_PFX
+  _combined_target=""
+  _combined_srccert=""
+
+  # Create PEM file
+  if [ "$DEPLOY_LOCALCOPY_CERTKEY" ] &&
+    { [ "$DEPLOY_LOCALCOPY_CERTKEY" = "$DEPLOY_LOCALCOPY_FULLCHAIN" ] ||
+      [ "$DEPLOY_LOCALCOPY_CERTKEY" = "$DEPLOY_LOCALCOPY_CERTIFICATE" ]; }; then
+
+    _combined_target="$DEPLOY_LOCALCOPY_CERTKEY"
+    _savedeployconf DEPLOY_LOCALCOPY_CERTKEY "$DEPLOY_LOCALCOPY_CERTKEY"
+    if [ "$DEPLOY_LOCALCOPY_CERTKEY" = "$DEPLOY_LOCALCOPY_CERTIFICATE" ]; then
+      _combined_srccert="$_ccert"
+      _savedeployconf DEPLOY_LOCALCOPY_CERTIFICATE "$DEPLOY_LOCALCOPY_CERTIFICATE"
+      DEPLOY_LOCALCOPY_CERTIFICATE=""
+    fi
+    if [ "$DEPLOY_LOCALCOPY_CERTKEY" = "$DEPLOY_LOCALCOPY_FULLCHAIN" ]; then
+      _combined_srccert="$_cfullchain"
+      _savedeployconf DEPLOY_LOCALCOPY_FULLCHAIN "$DEPLOY_LOCALCOPY_FULLCHAIN"
+      DEPLOY_LOCALCOPY_FULLCHAIN=""
+    fi
+    DEPLOY_LOCALCOPY_CERTKEY=""
+    _info "Creating combined PEM"
+    _debug "Creating combined PEM at $_combined_target"
+    if ! [ -f "$_combined_target" ]; then
+      touch "$_combined_target" || return 1
+      chmod 600 "$_combined_target"
+    fi
+    if ! cat "$_combined_srccert" "$_ckey" >"$_combined_target"; then
+      _err "Failed to create PEM file"
+      return 1
+    fi
+  fi
+
+  if [ "$DEPLOY_LOCALCOPY_CERTIFICATE" ]; then
+    _info "Copying certificate"
+    _debug "Copying $_ccert to $DEPLOY_LOCALCOPY_CERTIFICATE"
+    if ! cat "$_ccert" >"$DEPLOY_LOCALCOPY_CERTIFICATE"; then
+      _err "Failed to copy certificate, aborting."
+      return 1
+    fi
+    _savedeployconf DEPLOY_LOCALCOPY_CERTIFICATE "$DEPLOY_LOCALCOPY_CERTIFICATE"
+  fi
+
+  if [ "$DEPLOY_LOCALCOPY_CERTKEY" ]; then
+    _info "Copying certificate key"
+    _debug "Copying $_ckey to $DEPLOY_LOCALCOPY_CERTKEY"
+    if ! [ -f "$DEPLOY_LOCALCOPY_CERTKEY" ]; then
+      touch "$DEPLOY_LOCALCOPY_CERTKEY" || return 1
+      chmod 600 "$DEPLOY_LOCALCOPY_CERTKEY"
+    fi
+    if ! cat "$_ckey" >"$DEPLOY_LOCALCOPY_CERTKEY"; then
+      _err "Failed to copy certificate key, aborting."
+      return 1
+    fi
+    _savedeployconf DEPLOY_LOCALCOPY_CERTKEY "$DEPLOY_LOCALCOPY_CERTKEY"
+  fi
+
+  if [ "$DEPLOY_LOCALCOPY_FULLCHAIN" ]; then
+    _info "Copying fullchain"
+    _debug "Copying $_cfullchain to $DEPLOY_LOCALCOPY_FULLCHAIN"
+    if ! cat "$_cfullchain" >"$DEPLOY_LOCALCOPY_FULLCHAIN"; then
+      _err "Failed to copy fullchain, aborting."
+      return 1
+    fi
+    _savedeployconf DEPLOY_LOCALCOPY_FULLCHAIN "$DEPLOY_LOCALCOPY_FULLCHAIN"
+  fi
+
+  if [ "$DEPLOY_LOCALCOPY_CA" ]; then
+    _info "Copying CA"
+    _debug "Copying $_cca to $DEPLOY_LOCALCOPY_CA"
+    if ! cat "$_cca" >"$DEPLOY_LOCALCOPY_CA"; then
+      _err "Failed to copy CA, aborting."
+      return 1
+    fi
+    _savedeployconf DEPLOY_LOCALCOPY_CA "$DEPLOY_LOCALCOPY_CA"
+  fi
+
+  if [ "$DEPLOY_LOCALCOPY_PFX" ]; then
+    _info "Copying PFX"
+    _debug "Copying $_cpfx to $DEPLOY_LOCALCOPY_PFX"
+    if ! [ -f "$DEPLOY_LOCALCOPY_PFX" ]; then
+      touch "$DEPLOY_LOCALCOPY_PFX" || return 1
+      chmod 600 "$DEPLOY_LOCALCOPY_PFX"
+    fi
+    if ! cat "$_cpfx" >"$DEPLOY_LOCALCOPY_PFX"; then
+      _err "Failed to copy PFX, aborting."
+      return 1
+    fi
+    _savedeployconf DEPLOY_LOCALCOPY_PFX "$DEPLOY_LOCALCOPY_PFX"
+  fi
+
+  _reload=$DEPLOY_LOCALCOPY_RELOADCMD
+  _debug "Running reloadcmd $_reload"
+
+  if [ -z "$_reload" ]; then
+    _info "Reloadcmd not provided, skipping."
+  else
+    _info "Reloading"
+    if eval "$_reload"; then
+      _info "Reload successful."
+      _savedeployconf DEPLOY_LOCALCOPY_RELOADCMD "$DEPLOY_LOCALCOPY_RELOADCMD" "base64"
+    else
+      _err "Reload failed."
+      return 1
+    fi
+  fi
+
+  _info "$(__green "'localcopy' deploy success")"
+  return 0
+}

deploy/multideploy.sh

@@ -0,0 +1,276 @@
+#!/usr/bin/env sh
+
+################################################################################
+# ACME.sh 3rd party deploy plugin for multiple (same) services
+################################################################################
+# Authors: tomo2403 (creator), https://github.com/tomo2403
+# Updated: 2025-03-01
+# Issues:  https://github.com/acmesh-official/acme.sh/issues and mention @tomo2403
+################################################################################
+# Usage (shown values are the examples):
+# 1. Set optional environment variables
+#   - export MULTIDEPLOY_FILENAME="multideploy.yaml"     - "multideploy.yml" will be automatically used if not set"
+#
+# 2. Run command:
+# acme.sh --deploy --deploy-hook multideploy -d example.com
+################################################################################
+# Dependencies:
+# - yq
+################################################################################
+# Return value:
+# 0 means success, otherwise error.
+################################################################################
+
+MULTIDEPLOY_VERSION="1.0"
+
+# Description: This function handles the deployment of certificates to multiple services.
+#              It processes the provided certificate files and deploys them according to the
+#              configuration specified in the multideploy file.
+#
+# Parameters:
+#   _cdomain     - The domain name for which the certificate is issued.
+#   _ckey        - The private key file for the certificate.
+#   _ccert       - The certificate file.
+#   _cca         - The CA (Certificate Authority) file.
+#   _cfullchain  - The full chain certificate file.
+#   _cpfx        - The PFX (Personal Information Exchange) file.
+multideploy_deploy() {
+  _cdomain="$1"
+  _ckey="$2"
+  _ccert="$3"
+  _cca="$4"
+  _cfullchain="$5"
+  _cpfx="$6"
+
+  _debug _cdomain "$_cdomain"
+  _debug _ckey "$_ckey"
+  _debug _ccert "$_ccert"
+  _debug _cca "$_cca"
+  _debug _cfullchain "$_cfullchain"
+  _debug _cpfx "$_cpfx"
+
+  MULTIDEPLOY_FILENAME="${MULTIDEPLOY_FILENAME:-$(_getdeployconf MULTIDEPLOY_FILENAME)}"
+  if [ -z "$MULTIDEPLOY_FILENAME" ]; then
+    MULTIDEPLOY_FILENAME="multideploy.yml"
+    _info "MULTIDEPLOY_FILENAME is not set, so I will use 'multideploy.yml'."
+  else
+    _savedeployconf "MULTIDEPLOY_FILENAME" "$MULTIDEPLOY_FILENAME"
+    _debug2 "MULTIDEPLOY_FILENAME" "$MULTIDEPLOY_FILENAME"
+  fi
+
+  if ! file=$(_preprocess_deployfile "$MULTIDEPLOY_FILENAME"); then
+    _err "Failed to preprocess deploy file."
+    return 1
+  fi
+  _debug3 "File" "$file"
+
+  # Deploy to services
+  _deploy_services "$file"
+  _exitCode="$?"
+
+  return "$_exitCode"
+}
+
+# Description:
+#   This function preprocesses the deploy file by checking if 'yq' is installed,
+#   verifying the existence of the deploy file, and ensuring only one deploy file is present.
+# Arguments:
+#   $@ - Posible deploy file names.
+# Usage:
+#   _preprocess_deployfile "<deploy_file1>" "<deploy_file2>?"
+_preprocess_deployfile() {
+  # Check if yq is installed
+  if ! command -v yq >/dev/null 2>&1; then
+    _err "yq is not installed! Please install yq and try again."
+    return 1
+  fi
+  _debug3 "yq is installed."
+
+  # Check if deploy file exists
+  for file in "$@"; do
+    _debug3 "Checking file" "$DOMAIN_PATH/$file"
+    if [ -f "$DOMAIN_PATH/$file" ]; then
+      _debug3 "File found"
+      if [ -n "$found_file" ]; then
+        _err "Multiple deploy files found. Please keep only one deploy file."
+        return 1
+      fi
+      found_file="$file"
+    else
+      _debug3 "File not found"
+    fi
+  done
+
+  if [ -z "$found_file" ]; then
+    _err "Deploy file not found. Go to https://github.com/acmesh-official/acme.sh/wiki/deployhooks#36-deploying-to-multiple-services-with-the-same-hooks to see how to create one."
+    return 1
+  fi
+  if ! _check_deployfile "$DOMAIN_PATH/$found_file"; then
+    _err "Deploy file is not valid: $DOMAIN_PATH/$found_file"
+    return 1
+  fi
+
+  echo "$DOMAIN_PATH/$found_file"
+}
+
+# Description:
+#   This function checks the deploy file for version compatibility and the existence of the specified configuration and services.
+# Arguments:
+#   $1 - The path to the deploy configuration file.
+#   $2 - The name of the deploy configuration to use.
+# Usage:
+#   _check_deployfile "<deploy_file_path>"
+_check_deployfile() {
+  _deploy_file="$1"
+  _debug2 "check: Deploy file" "$_deploy_file"
+
+  # Check version
+  _deploy_file_version=$(yq -r '.version' "$_deploy_file")
+  if [ "$MULTIDEPLOY_VERSION" != "$_deploy_file_version" ]; then
+    _err "As of $PROJECT_NAME $VER, the deploy file needs version $MULTIDEPLOY_VERSION! Your current deploy file is of version $_deploy_file_version."
+    return 1
+  fi
+  _debug2 "check: Deploy file version is compatible: $_deploy_file_version"
+
+  # Extract all services from config
+  _services=$(yq -r '.services[].name' "$_deploy_file")
+
+  if [ -z "$_services" ]; then
+    _err "Config does not have any services to deploy to."
+    return 1
+  fi
+  _debug2 "check: Config has services."
+  echo "$_services" | while read -r _service; do
+    _debug3 " - $_service"
+  done
+
+  # Check if extracted services exist in services list
+  echo "$_services" | while read -r _service; do
+    _debug2 "check: Checking service: $_service"
+    # Check if service exists
+    _service_config=$(yq -r ".services[] | select(.name == \"$_service\")" "$_deploy_file")
+    if [ -z "$_service_config" ] || [ "$_service_config" = "null" ]; then
+      _err "Service '$_service' not found."
+      return 1
+    fi
+
+    _service_hook=$(echo "$_service_config" | yq -r ".hook" -)
+    if [ -z "$_service_hook" ] || [ "$_service_hook" = "null" ]; then
+      _err "Service '$_service' does not have a hook."
+      return 1
+    fi
+
+    _service_environment=$(echo "$_service_config" | yq -r ".environment" -)
+    if [ -z "$_service_environment" ] || [ "$_service_environment" = "null" ]; then
+      _err "Service '$_service' does not have an environment."
+      return 1
+    fi
+  done
+}
+
+# Description: This function takes a list of environment variables in YAML format,
+#              parses them, and exports each key-value pair as environment variables.
+# Arguments:
+#   $1 - A string containing the list of environment variables in YAML format.
+# Usage:
+#   _export_envs "$env_list"
+_export_envs() {
+  _env_list="$1"
+
+  _secure_debug3 "Exporting envs" "$_env_list"
+
+  echo "$_env_list" | yq -r 'to_entries | .[] | .key + "=" + .value' | while IFS='=' read -r _key _value; do
+    # Using eval to expand nested variables in the configuration file
+    _value=$(eval 'echo "'"$_value"'"')
+    _savedeployconf "$_key" "$_value"
+    _secure_debug3 "Saved $_key" "$_value"
+  done
+}
+
+# Description:
+#   This function takes a YAML formatted string of environment variables, parses it,
+#   and clears each environment variable. It logs the process of clearing each variable.
+#
+#   Note: Environment variables for a hook may be optional and differ between
+#   services using the same hook.
+#   If one service sets optional environment variables and another does not, the
+#   variables may persist and affect subsequent deployments.
+#   Clearing these variables after each service ensures that only the
+#   environment variables explicitly specified for each service in the deploy
+#   file are used.
+# Arguments:
+#   $1 - A YAML formatted string containing environment variable key-value pairs.
+# Usage:
+#   _clear_envs "<yaml_string>"
+_clear_envs() {
+  _env_list="$1"
+
+  _secure_debug3 "Clearing envs" "$_env_list"
+  env_pairs=$(echo "$_env_list" | yq -r 'to_entries | .[] | .key + "=" + .value')
+
+  echo "$env_pairs" | while IFS='=' read -r _key _value; do
+    _debug3 "Deleting key" "$_key"
+    _cleardomainconf "SAVED_$_key"
+    unset -v "$_key"
+  done
+}
+
+# Description:
+#   This function deploys services listed in the deploy configuration file.
+# Arguments:
+#   $1 - The path to the deploy configuration file.
+#   $2 - The list of services to deploy.
+# Usage:
+#   _deploy_services "<deploy_file_path>" "<services_list>"
+_deploy_services() {
+  _deploy_file="$1"
+  _debug3 "Deploy file" "$_deploy_file"
+
+  _tempfile=$(mktemp)
+  trap 'rm -f $_tempfile' EXIT
+
+  yq -r '.services[].name' "$_deploy_file" >"$_tempfile"
+  _debug3 "Services" "$(cat "$_tempfile")"
+
+  _failedServices=""
+  _failedCount=0
+  while read -r _service <&3; do
+    _debug2 "Service" "$_service"
+    _hook=$(yq -r ".services[] | select(.name == \"$_service\").hook" "$_deploy_file")
+    _envs=$(yq -r ".services[] | select(.name == \"$_service\").environment" "$_deploy_file")
+
+    _export_envs "$_envs"
+    if ! _deploy_service "$_service" "$_hook"; then
+      _failedServices="$_service, $_failedServices"
+      _failedCount=$((_failedCount + 1))
+    fi
+    _clear_envs "$_envs"
+  done 3<"$_tempfile"
+
+  _debug3 "Failed services" "$_failedServices"
+  _debug2 "Failed count" "$_failedCount"
+  if [ -n "$_failedServices" ]; then
+    _info "$(__red "Deployment failed") for services: $_failedServices"
+  else
+    _debug "All services deployed successfully."
+  fi
+
+  return "$_failedCount"
+}
+
+# Description: Deploys a service using the specified hook.
+# Arguments:
+#   $1 - The name of the service to deploy.
+#   $2 - The hook to use for deployment.
+# Usage:
+#   _deploy_service <service_name> <hook>
+_deploy_service() {
+  _name="$1"
+  _hook="$2"
+
+  _debug2 "SERVICE" "$_name"
+  _debug2 "HOOK" "$_hook"
+
+  _info "$(__green "Deploying") to '$_name' using '$_hook'"
+  _deploy "$_cdomain" "$_hook"
+}

deploy/netlify.sh

@@ -0,0 +1,69 @@
+#!/usr/bin/env sh
+
+# Script to deploy certificate to Netlify
+# https://docs.netlify.com/api/get-started/#authentication
+# https://open-api.netlify.com/#tag/sniCertificate
+
+# This deployment required following variables
+# export Netlify_ACCESS_TOKEN="Your Netlify Access Token"
+# export Netlify_SITE_ID="Your Netlify Site ID"
+
+# If have more than one SITE ID
+# export Netlify_SITE_ID="SITE_ID_1 SITE_ID_2"
+
+# returns 0 means success, otherwise error.
+
+########  Public functions #####################
+
+#domain keyfile certfile cafile fullchain
+netlify_deploy() {
+  _cdomain="$1"
+  _ckey="$2"
+  _ccert="$3"
+  _cca="$4"
+  _cfullchain="$5"
+
+  _debug _cdomain "$_cdomain"
+  _debug _ckey "$_ckey"
+  _debug _ccert "$_ccert"
+  _debug _cca "$_cca"
+  _debug _cfullchain "$_cfullchain"
+
+  if [ -z "$Netlify_ACCESS_TOKEN" ]; then
+    _err "Netlify_ACCESS_TOKEN is not defined."
+    return 1
+  else
+    _savedomainconf Netlify_ACCESS_TOKEN "$Netlify_ACCESS_TOKEN"
+  fi
+  if [ -z "$Netlify_SITE_ID" ]; then
+    _err "Netlify_SITE_ID is not defined."
+    return 1
+  else
+    _savedomainconf Netlify_SITE_ID "$Netlify_SITE_ID"
+  fi
+
+  _info "Deploying certificate to Netlify..."
+
+  ## upload certificate
+  string_ccert=$(sed 's/$/\\n/' "$_ccert" | tr -d '\n')
+  string_cca=$(sed 's/$/\\n/' "$_cca" | tr -d '\n')
+  string_key=$(sed 's/$/\\n/' "$_ckey" | tr -d '\n')
+
+  for SITE_ID in $Netlify_SITE_ID; do
+    _request_body="{\"certificate\":\"$string_ccert\",\"key\":\"$string_key\",\"ca_certificates\":\"$string_cca\"}"
+    _debug _request_body "$_request_body"
+    _debug Netlify_ACCESS_TOKEN "$Netlify_ACCESS_TOKEN"
+    export _H1="Authorization: Bearer $Netlify_ACCESS_TOKEN"
+    _response=$(_post "$_request_body" "https://api.netlify.com/api/v1/sites/$SITE_ID/ssl" "" "POST" "application/json")
+
+    if _contains "$_response" "\"error\""; then
+      _err "Error in deploying $_cdomain certificate to Netlify SITE_ID $SITE_ID."
+      _err "$_response"
+      return 1
+    fi
+    _debug response "$_response"
+    _info "Domain $_cdomain certificate successfully deployed to Netlify SITE_ID $SITE_ID."
+  done
+
+  return 0
+}

deploy/panos.sh

@@ -7,20 +7,27 @@
 #
 # Firewall admin with superuser and IP address is required.
 #
-# REQURED:
+# REQUIRED:
 #     export PANOS_HOST=""
 #     export PANOS_USER=""    #User *MUST* have Commit and Import Permissions in XML API for Admin Role
 #     export PANOS_PASS=""
 #
 # OPTIONAL
-#    export PANOS_TEMPLATE="" #Template Name of panorama managed devices
+#    export PANOS_TEMPLATE="" # Template Name of panorama managed devices
+#    export PANOS_TEMPLATE_STACK="" # set a Template Stack if certificate should also be pushed automatically
+#    export PANOS_VSYS="Shared"  # name of the vsys to import the certificate
+#    export PANOS_CERTNAME="" # use a custom certificate name to work around Panorama's 31-character limit
 #
 # The script will automatically generate a new API key if
 # no key is found, or if a saved key has expired or is invalid.
 
+_COMMIT_WAIT_INTERVAL=30   # query commit status every 30 seconds
+_COMMIT_WAIT_ITERATIONS=20 # query commit status 20 times (20*30 = 600 seconds = 10 minutes)
+
 # This function is to parse the XML response from the firewall
 parse_response() {
   type=$2
+  _debug "API Response: $1"
   if [ "$type" = 'keygen' ]; then
     status=$(echo "$1" | sed 's/^.*\(['\'']\)\([a-z]*\)'\''.*/\2/g')
     if [ "$status" = "success" ]; then
@@ -30,6 +37,13 @@ parse_response() {
       message="PAN-OS Key could not be set."
     fi
   else
+    if [ "$type" = 'commit' ]; then
+      job_id=$(echo "$1" | sed 's/^.*\(<job>\)\(.*\)<\/job>.*/\2/g')
+      _commit_job_id=$job_id
+    elif [ "$type" = 'job_status' ]; then
+      job_status=$(echo "$1" | tr -d '\n' | sed 's/^.*<result>\([^<]*\)<\/result>.*/\1/g')
+      _commit_job_status=$job_status
+    fi
     status=$(echo "$1" | tr -d '\n' | sed 's/^.*"\([a-z]*\)".*/\1/g')
     message=$(echo "$1" | tr -d '\n' | sed 's/.*\(<result>\|<msg>\|<line>\)\([^<]*\).*/\2/g')
     _debug "Firewall message:  $message"
@@ -44,24 +58,23 @@ parse_response() {
 #This function is used to deploy to the firewall
 deployer() {
   content=""
-  type=$1 # Types are keytest, keygen, cert, key, commit
+  type=$1 # Types are keytest, keygen, cert, key, commit, job_status, push
   panos_url="https://$_panos_host/api/"
+  export _H1="Content-Type: application/x-www-form-urlencoded"
 
   #Test API Key by performing a lookup
   if [ "$type" = 'keytest' ]; then
     _debug "**** Testing saved API Key ****"
-    _H1="Content-Type: application/x-www-form-urlencoded"
     # Get Version Info to test key
     content="type=version&key=$_panos_key"
     ## Exclude all scopes for the empty commit
-    #_exclude_scope="<policy-and-objects>exclude</policy-and-objects><device-and-network>exclude</device-and-network><shared-object>exclude</shared-object>"
-    #content="type=commit&action=partial&key=$_panos_key&cmd=<commit><partial>$_exclude_scope<admin><member>acmekeytest</member></admin></partial></commit>"
+    #_exclude_scope="<device-and-network>excluded</device-and-network><shared-object>excluded</shared-object>"
+    #content="type=commit&action=partial&key=$_panos_key&cmd=<commit><partial>$_exclude_scope<admin><member>$_panos_user</member></admin></partial></commit>"
   fi
 
   # Generate API Key
   if [ "$type" = 'keygen' ]; then
     _debug "**** Generating new API Key ****"
-    _H1="Content-Type: application/x-www-form-urlencoded"
     content="type=keygen&user=$_panos_user&password=$_panos_pass"
     # content="$content${nl}--$delim${nl}Content-Disposition: form-data; type=\"keygen\"; user=\"$_panos_user\"; password=\"$_panos_pass\"${nl}Content-Type: application/octet-stream${nl}${nl}"
   fi
@@ -77,25 +90,31 @@ deployer() {
     if [ "$type" = 'cert' ]; then
       panos_url="${panos_url}?type=import"
       content="--$delim${nl}Content-Disposition: form-data; name=\"category\"\r\n\r\ncertificate"
-      content="$content${nl}--$delim${nl}Content-Disposition: form-data; name=\"certificate-name\"\r\n\r\n$_cdomain"
+      content="$content${nl}--$delim${nl}Content-Disposition: form-data; name=\"certificate-name\"\r\n\r\n$_panos_certname"
       content="$content${nl}--$delim${nl}Content-Disposition: form-data; name=\"key\"\r\n\r\n$_panos_key"
       content="$content${nl}--$delim${nl}Content-Disposition: form-data; name=\"format\"\r\n\r\npem"
       content="$content${nl}--$delim${nl}Content-Disposition: form-data; name=\"file\"; filename=\"$(basename "$_cfullchain")\"${nl}Content-Type: application/octet-stream${nl}${nl}$(cat "$_cfullchain")"
       if [ "$_panos_template" ]; then
         content="$content${nl}--$delim${nl}Content-Disposition: form-data; name=\"target-tpl\"\r\n\r\n$_panos_template"
       fi
+      if [ "$_panos_vsys" ]; then
+        content="$content${nl}--$delim${nl}Content-Disposition: form-data; name=\"target-tpl-vsys\"\r\n\r\n$_panos_vsys"
+      fi
     fi
     if [ "$type" = 'key' ]; then
       panos_url="${panos_url}?type=import"
       content="--$delim${nl}Content-Disposition: form-data; name=\"category\"\r\n\r\nprivate-key"
-      content="$content${nl}--$delim${nl}Content-Disposition: form-data; name=\"certificate-name\"\r\n\r\n$_cdomain"
+      content="$content${nl}--$delim${nl}Content-Disposition: form-data; name=\"certificate-name\"\r\n\r\n$_panos_certname"
       content="$content${nl}--$delim${nl}Content-Disposition: form-data; name=\"key\"\r\n\r\n$_panos_key"
       content="$content${nl}--$delim${nl}Content-Disposition: form-data; name=\"format\"\r\n\r\npem"
       content="$content${nl}--$delim${nl}Content-Disposition: form-data; name=\"passphrase\"\r\n\r\n123456"
-      content="$content${nl}--$delim${nl}Content-Disposition: form-data; name=\"file\"; filename=\"$(basename "$_cdomain.key")\"${nl}Content-Type: application/octet-stream${nl}${nl}$(cat "$_ckey")"
+      content="$content${nl}--$delim${nl}Content-Disposition: form-data; name=\"file\"; filename=\"$(basename "$_panos_certname.key")\"${nl}Content-Type: application/octet-stream${nl}${nl}$(cat "$_ckey")"
       if [ "$_panos_template" ]; then
         content="$content${nl}--$delim${nl}Content-Disposition: form-data; name=\"target-tpl\"\r\n\r\n$_panos_template"
       fi
+      if [ "$_panos_vsys" ]; then
+        content="$content${nl}--$delim${nl}Content-Disposition: form-data; name=\"target-tpl-vsys\"\r\n\r\n$_panos_vsys"
+      fi
     fi
     #Close multipart
     content="$content${nl}--$delim--${nl}${nl}"
@@ -106,18 +125,30 @@ deployer() {
   # Commit changes
   if [ "$type" = 'commit' ]; then
     _debug "**** Committing changes ****"
-    export _H1="Content-Type: application/x-www-form-urlencoded"
     #Check for force commit - will commit ALL uncommited changes to the firewall. Use with caution!
     if [ "$FORCE" ]; then
       _debug "Force switch detected.  Committing ALL changes to the firewall."
-      cmd=$(printf "%s" "<commit><partial><force><admin><member>$_panos_user</member></admin></force></partial></commit>" | _url_encode)
+      cmd=$(printf "%s" "<commit><force><partial><admin><member>$_panos_user</member></admin></partial></force></commit>" | _url_encode)
     else
-      _exclude_scope="<policy-and-objects>exclude</policy-and-objects><device-and-network>exclude</device-and-network>"
-      cmd=$(printf "%s" "<commit><partial>$_exclude_scope<admin><member>$_panos_user</member></admin></partial></commit>" | _url_encode)
+      cmd=$(printf "%s" "<commit><partial><admin><member>$_panos_user</member></admin></partial></commit>" | _url_encode)
     fi
     content="type=commit&action=partial&key=$_panos_key&cmd=$cmd"
   fi
 
+  # Query job status
+  if [ "$type" = 'job_status' ]; then
+    echo "**** Querying job $_commit_job_id status ****"
+    cmd=$(printf "%s" "<show><jobs><id>$_commit_job_id</id></jobs></show>" | _url_encode)
+    content="type=op&key=$_panos_key&cmd=$cmd"
+  fi
+
+  # Push changes
+  if [ "$type" = 'push' ]; then
+    echo "**** Pushing changes ****"
+    cmd=$(printf "%s" "<commit-all><template-stack><name>$_panos_template_stack</name><admin><member>$_panos_user</member></admin></template-stack></commit-all>" | _url_encode)
+    content="type=commit&action=all&key=$_panos_key&cmd=$cmd"
+  fi
+
   response=$(_post "$content" "$panos_url" "" "POST")
   parse_response "$response" "$type"
   # Saving response to variables
@@ -126,6 +157,8 @@ deployer() {
   if [ "$response_status" = "success" ]; then
     _debug "Successfully deployed $type"
     return 0
+  elif [ "$_commit_job_status" ]; then
+    _debug "Commit Job Status = $_commit_job_status"
   else
     _err "Deploy of type $type failed. Try deploying with --debug to troubleshoot."
     _debug "$message"
@@ -173,13 +206,12 @@ panos_deploy() {
   fi
 
   # PANOS_KEY
-  _getdeployconf PANOS_KEY
   if [ "$PANOS_KEY" ]; then
-    _debug "Detected saved key."
-    _panos_key=$PANOS_KEY
+    _debug "Detected ENV variable PANOS_KEY. Saving to file."
+    _savedeployconf PANOS_KEY "$PANOS_KEY" 1
   else
-    _debug "No key detected"
-    unset _panos_key
+    _debug "Attempting to load variable PANOS_KEY from file."
+    _getdeployconf PANOS_KEY
   fi
 
   # PANOS_TEMPLATE
@@ -191,11 +223,42 @@ panos_deploy() {
     _getdeployconf PANOS_TEMPLATE
   fi
 
+  # PANOS_TEMPLATE_STACK
+  if [ "$PANOS_TEMPLATE_STACK" ]; then
+    _debug "Detected ENV variable PANOS_TEMPLATE_STACK. Saving to file."
+    _savedeployconf PANOS_TEMPLATE_STACK "$PANOS_TEMPLATE_STACK" 1
+  else
+    _debug "Attempting to load variable PANOS_TEMPLATE_STACK from file."
+    _getdeployconf PANOS_TEMPLATE_STACK
+  fi
+
+  # PANOS_TEMPLATE_STACK
+  if [ "$PANOS_VSYS" ]; then
+    _debug "Detected ENV variable PANOS_VSYS. Saving to file."
+    _savedeployconf PANOS_VSYS "$PANOS_VSYS" 1
+  else
+    _debug "Attempting to load variable PANOS_VSYS from file."
+    _getdeployconf PANOS_VSYS
+  fi
+
+  # PANOS_CERTNAME
+  if [ "$PANOS_CERTNAME" ]; then
+    _debug "Detected ENV variable PANOS_CERTNAME. Saving to file."
+    _savedeployconf PANOS_CERTNAME "$PANOS_CERTNAME" 1
+  else
+    _debug "Attempting to load variable PANOS_CERTNAME from file."
+    _getdeployconf PANOS_CERTNAME
+  fi
+
   #Store variables
   _panos_host=$PANOS_HOST
   _panos_user=$PANOS_USER
   _panos_pass=$PANOS_PASS
+  _panos_key=$PANOS_KEY
   _panos_template=$PANOS_TEMPLATE
+  _panos_template_stack=$PANOS_TEMPLATE_STACK
+  _panos_vsys=$PANOS_VSYS
+  _panos_certname=$PANOS_CERTNAME
 
   #Test API Key if found.  If the key is invalid, the variable _panos_key will be unset.
   if [ "$_panos_host" ] && [ "$_panos_key" ]; then
@@ -207,15 +270,22 @@ panos_deploy() {
   if [ -z "$_panos_host" ]; then
     _err "No host found. If this is your first time deploying, please set PANOS_HOST in ENV variables. You can delete it after you have successfully deployed the certs."
     return 1
-  elif [ -z "$_panos_user" ]; then
-    _err "No user found. If this is your first time deploying, please set PANOS_USER in ENV variables. You can delete it after you have successfully deployed the certs."
-    return 1
-  elif [ -z "$_panos_pass" ]; then
-    _err "No password found. If this is your first time deploying, please set PANOS_PASS in ENV variables. You can delete it after you have successfully deployed the certs."
-    return 1
   else
+    # Use certificate name based on the first domain on the certificate if no custom certificate name is set
+    if [ -z "$_panos_certname" ]; then
+      _panos_certname="$_cdomain"
+      _savedeployconf PANOS_CERTNAME "$_panos_certname" 1
+    fi
+
     # Generate a new API key if no valid API key is found
     if [ -z "$_panos_key" ]; then
+      if [ -z "$_panos_user" ]; then
+        _err "No user found. If this is your first time deploying, please set PANOS_USER in ENV variables. You can delete it after you have successfully deployed the certs."
+        return 1
+      elif [ -z "$_panos_pass" ]; then
+        _err "No password found. If this is your first time deploying, please set PANOS_PASS in ENV variables. You can delete it after you have successfully deployed the certs."
+        return 1
+      fi
       _debug "**** Generating new PANOS API KEY ****"
       deployer keygen
       _savedeployconf PANOS_KEY "$_panos_key" 1
@@ -229,6 +299,20 @@ panos_deploy() {
       deployer cert
       deployer key
       deployer commit
+      if [ "$_panos_template_stack" ]; then
+        # try to get job status for 20 times in 30 sec interval
+        i=0
+        while [ "$i" -lt $_COMMIT_WAIT_ITERATIONS ]; do
+          deployer job_status
+          if [ "$_commit_job_status" = "OK" ]; then
+            echo "Commit finished!"
+            break
+          fi
+          sleep $_COMMIT_WAIT_INTERVAL
+          i=$((i + 1))
+        done
+        deployer push
+      fi
     fi
   fi
 }

deploy/proxmoxbs.sh

@@ -115,6 +115,18 @@ HEREDOC
   _info "Push certificates to server"
   export HTTPS_INSECURE=1
   export _H1="Authorization: PBSAPIToken=${_proxmoxbs_header_api_token}"
-  _post "$_json_payload" "$_target_url" "" POST "application/json"
+  response=$(_post "$_json_payload" "$_target_url" "" POST "application/json")
+  response="$(echo "$response" | _json_decode | _normalizeJson)"
+  message=$(echo "$response" | _egrep_o '"message":"[^"]*' | cut -d : -f 2 | tr -d '"')
+  _retval=$?
+  if [ "${_retval}" -eq 0 ] && [ -z "$message" ]; then
+    _debug3 response "$response"
+    _info "Certificate successfully deployed"
+    return 0
+  else
+    _err "Certificate deployment failed: $message"
+    _debug "Response" "$response"
+    return 1
+  fi
 
 }

deploy/proxmoxve.sh

@@ -127,6 +127,18 @@ HEREDOC
   _info "Push certificates to server"
   export HTTPS_INSECURE=1
   export _H1="Authorization: PVEAPIToken=${_proxmoxve_header_api_token}"
-  _post "$_json_payload" "$_target_url" "" POST "application/json"
+  response=$(_post "$_json_payload" "$_target_url" "" POST "application/json")
+  response="$(echo "$response" | _json_decode | _normalizeJson)"
+  message=$(echo "$response" | _egrep_o '"message":"[^"]*' | cut -d : -f 2 | tr -d '"')
+  _retval=$?
+  if [ "${_retval}" -eq 0 ] && [ -z "$message" ]; then
+    _debug3 response "$response"
+    _info "Certificate successfully deployed"
+    return 0
+  else
+    _err "Certificate deployment failed: $message"
+    _debug "Response" "$response"
+    return 1
+  fi
 
 }

deploy/qiniu.sh

@@ -8,6 +8,8 @@
 # export QINIU_CDN_DOMAIN="cdn.example.com"
 # If you have more than one domain, just
 # export QINIU_CDN_DOMAIN="cdn1.example.com cdn2.example.com"
+# Optional: force HTTPS redirect (default: false)
+# export QINIU_FORCE_HTTPS="true"
 
 QINIU_API_BASE="https://api.qiniu.com"
 
@@ -44,6 +46,12 @@ qiniu_deploy() {
     QINIU_CDN_DOMAIN="$_cdomain"
   fi
 
+  if [ -z "$QINIU_FORCE_HTTPS" ]; then
+    QINIU_FORCE_HTTPS="false"
+  else
+    _savedomainconf QINIU_FORCE_HTTPS "$QINIU_FORCE_HTTPS"
+  fi
+
   ## upload certificate
   string_fullchain=$(sed 's/$/\\n/' "$_cfullchain" | tr -d '\n')
   string_key=$(sed 's/$/\\n/' "$_ckey" | tr -d '\n')
@@ -69,7 +77,7 @@ qiniu_deploy() {
   _debug certId "$_certId"
 
   ## update domain ssl config
-  update_body="{\"certid\":$_certId,\"forceHttps\":false}"
+  update_body="{\"certid\":$_certId,\"forceHttps\":$QINIU_FORCE_HTTPS}"
   for domain in $QINIU_CDN_DOMAIN; do
     update_path="/domain/$domain/httpsconf"
     update_access_token="$(_make_access_token "$update_path")"

deploy/ssh.sh

@@ -238,6 +238,8 @@ then rm -rf \"\$fn\"; echo \"Backup \$fn deleted as older than 180 days\"; fi; d
         return $_err_code
       fi
     else
+      # If file doesn't exist, create it and change its permissions.
+      _cmdstr="$_cmdstr test ! -f $DEPLOY_SSH_KEYFILE && touch $DEPLOY_SSH_KEYFILE && chmod 600 $DEPLOY_SSH_KEYFILE;"
       # ssh echo to the file
       _cmdstr="$_cmdstr echo \"$(cat "$_ckey")\" > $DEPLOY_SSH_KEYFILE;"
       _info "will copy private key to remote file $DEPLOY_SSH_KEYFILE"

deploy/strongswan.sh

@@ -33,7 +33,7 @@ strongswan_deploy() {
       return 1
     fi
     _info _confdir "${_confdir}"
-    __deploy_cert "$@" "stroke" "${_confdir}"
+    __deploy_cert "stroke" "${_confdir}" "$@"
     ${_ipsec} reload
   fi
   # For modern vici mode
@@ -50,7 +50,7 @@ strongswan_deploy() {
       _err "no swanctl config dir is found"
       return 1
     fi
-    __deploy_cert "$@" "vici" "${_confdir}"
+    __deploy_cert "vici" "${_confdir}" "$@"
     ${_swanctl} --load-creds
   fi
   if [ -z "${_swanctl}" ] && [ -z "${_ipsec}" ]; then
@@ -63,13 +63,13 @@ strongswan_deploy() {
 ####################  Private functions below ##################################
 
 __deploy_cert() {
-  _cdomain="${1}"
-  _ckey="${2}"
-  _ccert="${3}"
-  _cca="${4}"
-  _cfullchain="${5}"
-  _swan_mode="${6}"
-  _confdir="${7}"
+  _swan_mode="${1}"
+  _confdir="${2}"
+  _cdomain="${3}"
+  _ckey="${4}"
+  _ccert="${5}"
+  _cca="${6}"
+  _cfullchain="${7}"
   _debug _cdomain "${_cdomain}"
   _debug _ckey "${_ckey}"
   _debug _ccert "${_ccert}"

deploy/synology_dsm.sh

@@ -353,7 +353,7 @@ synology_dsm_deploy() {
   _debug2 SYNO_CREATE "$SYNO_CREATE"
 
   if [ -z "$id" ] && [ -z "$SYNO_CREATE" ]; then
-    _err "Unable to find certificate: $SYNO_CERTIFICATE and $SYNO_CREATE is not set."
+    _err "Unable to find certificate: $SYNO_CERTIFICATE and \$SYNO_CREATE is not set."
     _temp_admin_cleanup "$SYNO_USE_TEMP_ADMIN" "$SYNO_USERNAME"
     return 1
   fi
@@ -387,7 +387,7 @@ synology_dsm_deploy() {
     if echo "$response" | grep '"restart_httpd":true' >/dev/null; then
       _info "Restart HTTP services succeeded."
     else
-      _info "Restart HTTP services failed."
+      _info "Restart HTTP services not necessary."
     fi
     _temp_admin_cleanup "$SYNO_USE_TEMP_ADMIN" "$SYNO_USERNAME"
     _logout

deploy/truenas_ws.sh

@@ -39,19 +39,52 @@ _ws_call() {
   _debug "_ws_call arg2" "$2"
   _debug "_ws_call arg3" "$3"
   if [ $# -eq 3 ]; then
-    _ws_response=$(midclt -K "$DEPLOY_TRUENAS_APIKEY" call "$1" "$2" "$3")
+    _ws_response=$(midclt --uri "$_ws_uri" -K "$DEPLOY_TRUENAS_APIKEY" call "$1" "$2" "$3")
   fi
   if [ $# -eq 2 ]; then
-    _ws_response=$(midclt -K "$DEPLOY_TRUENAS_APIKEY" call "$1" "$2")
+    _ws_response=$(midclt --uri "$_ws_uri" -K "$DEPLOY_TRUENAS_APIKEY" call "$1" "$2")
   fi
   if [ $# -eq 1 ]; then
-    _ws_response=$(midclt -K "$DEPLOY_TRUENAS_APIKEY" call "$1")
+    _ws_response=$(midclt --uri "$_ws_uri" -K "$DEPLOY_TRUENAS_APIKEY" call "$1")
   fi
   _debug "_ws_response" "$_ws_response"
   printf "%s" "$_ws_response"
   return 0
 }
 
+# Upload certificate with webclient api
+_ws_upload_cert() {
+
+  /usr/bin/env python - <<EOF
+
+import sys
+
+from truenas_api_client import Client
+with Client(uri="$_ws_uri") as c:
+
+  ### Login with API key
+  print("I:Trying to upload new certificate...")
+  ret = c.call("auth.login_with_api_key", "${DEPLOY_TRUENAS_APIKEY}")
+  if ret:
+    ### upload certificate
+    with open('$1', 'r') as file:
+      fullchain = file.read()
+    with open('$2', 'r') as file:
+      privatekey = file.read()
+    ret = c.call("certificate.create", {"name": "$3", "create_type": "CERTIFICATE_CREATE_IMPORTED", "certificate": fullchain, "privatekey": privatekey}, job=True)
+    print("R:" + str(ret["id"]))
+    sys.exit(0)
+  else:
+    print("R:0")
+    print("E:_ws_upload_cert error!")
+    sys.exit(7)
+
+EOF
+
+  return $?
+
+}
+
 # Check argument is a number
 # Usage:
 #
@@ -88,7 +121,7 @@ _ws_check_jobid() {
 #   n/a
 _ws_get_job_result() {
   while true; do
-    sleep 2
+    _sleep 2
     _ws_response=$(_ws_call "core.get_jobs" "[[\"id\", \"=\", $1]]")
     if [ "$(printf "%s" "$_ws_response" | jq -r '.[]."state"')" != "RUNNING" ]; then
       _ws_result="$(printf "%s" "$_ws_response" | jq '.[]."result"')"
@@ -129,7 +162,6 @@ _ws_get_job_result() {
 #  5: WebUI cert error
 #  6: Job error
 #  7: WS call error
-# 10: No CORE or SCALE detected
 #
 truenas_ws_deploy() {
   _domain="$1"
@@ -147,11 +179,27 @@ truenas_ws_deploy() {
 
   _info "Checking environment variables..."
   _getdeployconf DEPLOY_TRUENAS_APIKEY
+  _getdeployconf DEPLOY_TRUENAS_HOSTNAME
+  _getdeployconf DEPLOY_TRUENAS_PROTOCOL
   # Check API Key
   if [ -z "$DEPLOY_TRUENAS_APIKEY" ]; then
     _err "TrueNAS API key not found, please set the DEPLOY_TRUENAS_APIKEY environment variable."
     return 1
   fi
+  # Check Hostname, default to localhost if not set
+  if [ -z "$DEPLOY_TRUENAS_HOSTNAME" ]; then
+    _info "TrueNAS hostname not set. Using 'localhost'."
+    DEPLOY_TRUENAS_HOSTNAME="localhost"
+  fi
+  # Check protocol, default to ws if not set
+  if [ -z "$DEPLOY_TRUENAS_PROTOCOL" ]; then
+    _info "TrueNAS protocol not set. Using 'ws'."
+    DEPLOY_TRUENAS_PROTOCOL="ws"
+  fi
+  _ws_uri="$DEPLOY_TRUENAS_PROTOCOL://$DEPLOY_TRUENAS_HOSTNAME/websocket"
+  _debug2 DEPLOY_TRUENAS_HOSTNAME "$DEPLOY_TRUENAS_HOSTNAME"
+  _debug2 DEPLOY_TRUENAS_PROTOCOL "$DEPLOY_TRUENAS_PROTOCOL"
+  _debug _ws_uri "$_ws_uri"
   _secure_debug2 DEPLOY_TRUENAS_APIKEY "$DEPLOY_TRUENAS_APIKEY"
   _info "Environment variables: OK"
 
@@ -173,20 +221,16 @@ truenas_ws_deploy() {
     return 2
   fi
   _savedeployconf DEPLOY_TRUENAS_APIKEY "$DEPLOY_TRUENAS_APIKEY"
+  _savedeployconf DEPLOY_TRUENAS_HOSTNAME "$DEPLOY_TRUENAS_HOSTNAME"
+  _savedeployconf DEPLOY_TRUENAS_PROTOCOL "$DEPLOY_TRUENAS_PROTOCOL"
   _info "TrueNAS health: OK"
 
   ########## System info
 
   _info "Gather system info..."
   _ws_response=$(_ws_call "system.info")
-  _truenas_system=$(printf "%s" "$_ws_response" | jq -r '."version"' | cut -d '-' -f 2 | tr '[:lower:]' '[:upper:]')
-  _truenas_version=$(printf "%s" "$_ws_response" | jq -r '."version"' | cut -d '-' -f 3)
-  _info "TrueNAS system: $_truenas_system"
+  _truenas_version=$(printf "%s" "$_ws_response" | jq -r '."version"')
   _info "TrueNAS version: $_truenas_version"
-  if [ "$_truenas_system" != "SCALE" ] && [ "$_truenas_system" != "CORE" ]; then
-    _err "Cannot gather TrueNAS system. Nor CORE oder SCALE detected."
-    return 10
-  fi
 
   ########## Gather current certificate
 
@@ -203,19 +247,26 @@ truenas_ws_deploy() {
   _certname="acme_$(_utc_date | tr -d '\-\:' | tr ' ' '_')"
   _info "New WebUI certificate name: $_certname"
   _debug _certname "$_certname"
-  _ws_jobid=$(_ws_call "certificate.create" "{\"name\": \"${_certname}\", \"create_type\": \"CERTIFICATE_CREATE_IMPORTED\", \"certificate\": \"$(_json_encode <"$_file_fullchain")\", \"privatekey\": \"$(_json_encode <"$_file_key")\", \"passphrase\": \"\"}")
-  _debug "_ws_jobid" "$_ws_jobid"
-  if ! _ws_check_jobid "$_ws_jobid"; then
-    _err "No JobID returned from websocket method."
-    return 3
-  fi
-  _ws_result=$(_ws_get_job_result "$_ws_jobid")
-  _ws_ret=$?
-  if [ $_ws_ret -gt 0 ]; then
-    return $_ws_ret
-  fi
-  _debug "_ws_result" "$_ws_result"
-  _new_certid=$(printf "%s" "$_ws_result" | jq -r '."id"')
+  _ws_out=$(_ws_upload_cert "$_file_fullchain" "$_file_key" "$_certname")
+
+  echo "$_ws_out" | while IFS= read -r LINE; do
+    case "$LINE" in
+    I:*)
+      _info "${LINE#I:}"
+      ;;
+    D:*)
+      _debug "${LINE#D:}"
+      ;;
+    E*)
+      _err "${LINE#E:}"
+      ;;
+    *) ;;
+
+    esac
+  done
+
+  _new_certid=$(echo "$_ws_out" | grep 'R:' | cut -d ':' -f 2)
+
   _info "New certificate ID: $_new_certid"
 
   ########## FTP
@@ -231,33 +282,31 @@ truenas_ws_deploy() {
 
   ########## ix Apps (SCALE only)
 
-  if [ "$_truenas_system" = "SCALE" ]; then
-    _info "Replace app certificates..."
-    _ws_response=$(_ws_call "app.query")
-    for _app_name in $(printf "%s" "$_ws_response" | jq -r '.[]."name"'); do
-      _info "Checking app $_app_name..."
-      _ws_response=$(_ws_call "app.config" "$_app_name")
-      if [ "$(printf "%s" "$_ws_response" | jq -r '."network" | has("certificate_id")')" = "true" ]; then
-        _info "App has certificate option, setup new certificate..."
-        _info "App will be redeployed after updating the certificate."
-        _ws_jobid=$(_ws_call "app.update" "$_app_name" "{\"values\": {\"network\": {\"certificate_id\": $_new_certid}}}")
-        _debug "_ws_jobid" "$_ws_jobid"
-        if ! _ws_check_jobid "$_ws_jobid"; then
-          _err "No JobID returned from websocket method."
-          return 3
-        fi
-        _ws_result=$(_ws_get_job_result "$_ws_jobid")
-        _ws_ret=$?
-        if [ $_ws_ret -gt 0 ]; then
-          return $_ws_ret
-        fi
-        _debug "_ws_result" "$_ws_result"
-        _info "App certificate replaced."
-      else
-        _info "App has no certificate option, skipping..."
+  _info "Replace app certificates..."
+  _ws_response=$(_ws_call "app.query")
+  for _app_name in $(printf "%s" "$_ws_response" | jq -r '.[]."name"'); do
+    _info "Checking app $_app_name..."
+    _ws_response=$(_ws_call "app.config" "$_app_name")
+    if [ "$(printf "%s" "$_ws_response" | jq -r '."network" | has("certificate_id")')" = "true" ]; then
+      _info "App has certificate option, setup new certificate..."
+      _info "App will be redeployed after updating the certificate."
+      _ws_jobid=$(_ws_call "app.update" "$_app_name" "{\"values\": {\"network\": {\"certificate_id\": $_new_certid}}}")
+      _debug "_ws_jobid" "$_ws_jobid"
+      if ! _ws_check_jobid "$_ws_jobid"; then
+        _err "No JobID returned from websocket method."
+        return 3
       fi
-    done
-  fi
+      _ws_result=$(_ws_get_job_result "$_ws_jobid")
+      _ws_ret=$?
+      if [ $_ws_ret -gt 0 ]; then
+        return $_ws_ret
+      fi
+      _debug "_ws_result" "$_ws_result"
+      _info "App certificate replaced."
+    else
+      _info "App has no certificate option, skipping..."
+    fi
+  done
 
   ########## WebUI
 
@@ -273,7 +322,7 @@ truenas_ws_deploy() {
   _info "Restarting WebUI..."
   _ws_response=$(_ws_call "system.general.ui_restart")
   _info "Waiting for UI restart..."
-  sleep 6
+  _sleep 15
 
   ########## Certificates
 

deploy/unifi.sh

@@ -143,8 +143,10 @@ unifi_deploy() {
 
     # correct file ownership according to the directory, the keystore is placed in
     _unifi_keystore_dir=$(dirname "${_unifi_keystore}")
-    _unifi_keystore_dir_owner=$(find "${_unifi_keystore_dir}" -maxdepth 0 -printf '%u\n')
-    _unifi_keystore_owner=$(find "${_unifi_keystore}" -maxdepth 0 -printf '%u\n')
+    # shellcheck disable=SC2012
+    _unifi_keystore_dir_owner=$(ls -ld "${_unifi_keystore_dir}" | awk '{print $3}')
+    # shellcheck disable=SC2012
+    _unifi_keystore_owner=$(ls -l "${_unifi_keystore}" | awk '{print $3}')
     if ! [ "${_unifi_keystore_owner}" = "${_unifi_keystore_dir_owner}" ]; then
       _debug "Changing keystore owner to ${_unifi_keystore_dir_owner}"
       chown "$_unifi_keystore_dir_owner" "${_unifi_keystore}" >/dev/null 2>&1 # fail quietly if we're not running as root

deploy/zyxel_gs1900.sh

@@ -0,0 +1,500 @@
+#!/usr/bin/env sh
+
+# Deploy certificates to Zyxel GS1900 series switches
+#
+# This script uses the https web administration interface in order
+# to upload updated certificates to Zyxel GS1900 series switches.
+# Only a few models have been tested but untested switches from the
+# same model line may work as well. If you test and confirm a switch
+# as working please submit a pull request updating this compatibility
+# list!
+#
+# Known Issues:
+#   1. This is a consumer grade switch and is a bit underpowered
+#      the longer the RSA key size the slower your switch web UI
+#      will be. RSA 2048 will work, RSA 4096 will work but you may
+#      experience performance problems.
+#   2. You must use RSA certificates. The switch will reject EC-256
+#      and EC-384 certificates in firmware 2.80
+#      See: https://community.zyxel.com/en/discussion/21506/bug-cannot-import-ssl-cert-on-gs1900-8-and-gs1900-24e-firmware-v2-80/
+#
+# Current GS1900 Switch Compatibility:
+#   GS1900-8    - Working as of firmware V2.80
+#   GS1900-8HP  - Untested
+#   GS1900-10HP - Untested
+#   GS1900-16   - Untested
+#   GS1900-24   - Untested
+#   GS1900-24E  - Working as of firmware V2.80
+#   GS1900-24EP - Untested
+#   GS1900-24HP - Untested
+#   GS1900-48   - Untested
+#   GS1900-48HP - Untested
+#
+# Prerequisite Setup Steps:
+#   1. Install at least firmware V2.80 on your switch
+#   2. Enable HTTPS web management on your switch
+#
+# Usage:
+#   1. Ensure the switch has firmware V2.80 or later.
+#   2. Ensure the switch has HTTPS management enabled.
+#   3. Set the appropriate environment variables for your environment.
+#
+#      DEPLOY_ZYXEL_SWITCH          - The switch hostname. (Default: _cdomain)
+#      DEPLOY_ZYXEL_SWITCH_USER     - The webadmin user. (Default: admin)
+#      DEPLOY_ZYXEL_SWITCH_PASSWORD - The webadmin password for the switch.
+#      DEPLOY_ZYXEL_SWITCH_REBOOT   - If "1" reboot after update. (Default: "0")
+#
+#   4. Run the deployment plugin:
+#      acme.sh --deploy --deploy-hook zyxel_gs1900 -d example.com
+#
+# returns 0 means success, otherwise error.
+
+#domain keyfile certfile cafile fullchain
+zyxel_gs1900_deploy() {
+  _zyxel_gs1900_minimum_firmware_version="v2.80"
+
+  _cdomain="$1"
+  _ckey="$2"
+  _ccert="$3"
+  _cca="$4"
+  _cfullchain="$5"
+
+  _debug _cdomain "$_cdomain"
+  _debug2 _ckey "$_ckey"
+  _debug _ccert "$_ccert"
+  _debug _cca "$_cca"
+  _debug _cfullchain "$_cfullchain"
+
+  _getdeployconf DEPLOY_ZYXEL_SWITCH
+  _getdeployconf DEPLOY_ZYXEL_SWITCH_USER
+  _getdeployconf DEPLOY_ZYXEL_SWITCH_PASSWORD
+  _getdeployconf DEPLOY_ZYXEL_SWITCH_REBOOT
+
+  if [ -z "$DEPLOY_ZYXEL_SWITCH" ]; then
+    DEPLOY_ZYXEL_SWITCH="$_cdomain"
+  fi
+
+  if [ -z "$DEPLOY_ZYXEL_SWITCH_USER" ]; then
+    DEPLOY_ZYXEL_SWITCH_USER="admin"
+  fi
+
+  if [ -z "$DEPLOY_ZYXEL_SWITCH_PASSWORD" ]; then
+    DEPLOY_ZYXEL_SWITCH_PASSWORD="1234"
+  fi
+
+  if [ -z "$DEPLOY_ZYXEL_SWITCH_REBOOT" ]; then
+    DEPLOY_ZYXEL_SWITCH_REBOOT="0"
+  fi
+
+  _savedeployconf DEPLOY_ZYXEL_SWITCH "$DEPLOY_ZYXEL_SWITCH"
+  _savedeployconf DEPLOY_ZYXEL_SWITCH_USER "$DEPLOY_ZYXEL_SWITCH_USER"
+  _savedeployconf DEPLOY_ZYXEL_SWITCH_PASSWORD "$DEPLOY_ZYXEL_SWITCH_PASSWORD"
+  _savedeployconf DEPLOY_ZYXEL_SWITCH_REBOOT "$DEPLOY_ZYXEL_SWITCH_REBOOT"
+
+  _debug DEPLOY_ZYXEL_SWITCH "$DEPLOY_ZYXEL_SWITCH"
+  _debug DEPLOY_ZYXEL_SWITCH_USER "$DEPLOY_ZYXEL_SWITCH_USER"
+  _secure_debug DEPLOY_ZYXEL_SWITCH_PASSWORD "$DEPLOY_ZYXEL_SWITCH_PASSWORD"
+  _debug DEPLOY_ZYXEL_SWITCH_REBOOT "$DEPLOY_ZYXEL_SWITCH_REBOOT"
+
+  _zyxel_switch_base_uri="https://${DEPLOY_ZYXEL_SWITCH}"
+
+  _info "Beginning to deploy to a Zyxel GS1900 series switch at ${_zyxel_switch_base_uri}."
+  _zyxel_gs1900_deployment_precheck || return $?
+
+  _zyxel_gs1900_should_update
+  if [ "$?" != "0" ]; then
+    _info "The switch already has our certificate installed. No update required."
+    return 0
+  else
+    _info "The switch does not yet have our certificate installed."
+  fi
+
+  _info "Logging into the switch web interface."
+  _zyxel_gs1900_login || return $?
+
+  _info "Validating the switch is compatible with this deployment process."
+  _zyxel_gs1900_validate_device_compatibility || return $?
+
+  _info "Uploading the certificate."
+  _zyxel_gs1900_upload_certificate || return $?
+
+  if [ "$DEPLOY_ZYXEL_SWITCH_REBOOT" = "1" ]; then
+    _info "Rebooting the switch."
+    _zyxel_gs1900_trigger_reboot || return $?
+  fi
+
+  return 0
+}
+
+_zyxel_gs1900_deployment_precheck() {
+  # Initialize the keylength if it isn't already
+  if [ -z "$Le_Keylength" ]; then
+    Le_Keylength=""
+  fi
+
+  if _isEccKey "$Le_Keylength"; then
+    _info "Warning: Zyxel GS1900 switches are not currently known to work with ECC keys!"
+    _info "You can continue, but your switch may reject your key."
+  elif [ -n "$Le_Keylength" ] && [ "$Le_Keylength" -gt "2048" ]; then
+    _info "Warning: Your RSA key length is greater than 2048!"
+    _info "You can continue, but you may experience performance issues in the web administration interface."
+  fi
+
+  # Check the server for some common failure modes prior to authentication and certificate upload in order to avoid
+  # sending a certificate when we may not want to.
+  test_login_response=$(_post "username=test&password=test&login=true;" "${_zyxel_switch_base_uri}/cgi-bin/dispatcher.cgi?cmd=0.html" '' "POST" "application/x-www-form-urlencoded" 2>&1)
+  test_login_page_exitcode="$?"
+  _debug3 "Test Login Response: ${test_login_response}"
+  if [ "$test_login_page_exitcode" -ne "0" ]; then
+    if { [ "${ACME_USE_WGET:-0}" = "0" ] && [ "$test_login_page_exitcode" = "60" ]; } || { [ "${ACME_USE_WGET:-0}" = "1" ] && [ "$test_login_page_exitcode" = "5" ]; }; then
+      _err "The SSL certificate at $_zyxel_switch_base_uri could not be validated."
+      _err "Please double check your hostname, port, and that you are actually connecting to your switch."
+      _err "If the problem persists then please ensure that the certificate is not self-signed, has not"
+      _err "expired, and matches the switch hostname. If you expect validation to fail then you can disable"
+      _err "certificate validation by running with --insecure."
+      return 1
+    elif [ "${ACME_USE_WGET:-0}" = "0" ] && [ "$test_login_page_exitcode" = "56" ]; then
+      _debug3 "Intentionally ignore curl exit code 56 in our precheck"
+    else
+      _err "Failed to submit the initial login attempt to $_zyxel_switch_base_uri."
+      return 1
+    fi
+  fi
+}
+
+_zyxel_gs1900_login() {
+  # Login to the switch and set the appropriate auth cookie in _H1
+  username_encoded=$(printf "%s" "$DEPLOY_ZYXEL_SWITCH_USER" | _url_encode)
+  password_encoded=$(_zyxel_gs1900_password_obfuscate "$DEPLOY_ZYXEL_SWITCH_PASSWORD" | _url_encode)
+
+  login_response=$(_post "username=${username_encoded}&password=${password_encoded}&login=true;" "${_zyxel_switch_base_uri}/cgi-bin/dispatcher.cgi?cmd=0.html" '' "POST" "application/x-www-form-urlencoded" | tr -d '\n')
+  auth_response=$(_post "authId=${login_response}&login_chk=true" "${_zyxel_switch_base_uri}/cgi-bin/dispatcher.cgi?cmd=0.html" '' "POST" "application/x-www-form-urlencoded" | tr -d '\n')
+  if [ "$auth_response" != "OK" ]; then
+    _err "Login failed due to invalid credentials."
+    _err "Please double check the configured username and password and try again."
+    return 1
+  fi
+
+  sessionid=$(grep -i '^set-cookie:' "$HTTP_HEADER" | _egrep_o 'HTTPS_XSSID=[^;]*;' | tr -d ';')
+  _secure_debug2 "sessionid" "$sessionid"
+
+  export _H1="Cookie: $sessionid"
+  _secure_debug2 "_H1" "$_H1"
+
+  return 0
+}
+
+_zyxel_gs1900_validate_device_compatibility() {
+  # Check the switches model and firmware version and throw errors
+  # if this script isn't compatible.
+  device_info_html=$(_get "${_zyxel_switch_base_uri}/cgi-bin/dispatcher.cgi?cmd=12" | tr -d '\n')
+
+  model_name=$(_zyxel_gs1900_get_model "$device_info_html")
+  _debug2 "model_name" "$model_name"
+  if [ -z "$model_name" ]; then
+    _err "Could not find the switch model name."
+    _err "Please re-run with --debug and report a bug."
+    return $?
+  fi
+
+  if ! expr "$model_name" : "GS1900-" >/dev/null; then
+    _err "Switch is an unsupported model: $model_name"
+    return 1
+  fi
+
+  firmware_version=$(_zyxel_gs1900_get_firmware_version "$device_info_html")
+  _debug2 "firmware_version" "$firmware_version"
+  if [ -z "$firmware_version" ]; then
+    _err "Could not find the switch firmware version."
+    _err "Please re-run with --debug and report a bug."
+    return $?
+  fi
+
+  _debug2 "_zyxel_gs1900_minimum_firmware_version" "$_zyxel_gs1900_minimum_firmware_version"
+  minimum_major_version=$(_zyxel_gs1900_parse_major_version "$_zyxel_gs1900_minimum_firmware_version")
+  _debug2 "minimum_major_version" "$minimum_major_version"
+  minimum_minor_version=$(_zyxel_gs1900_parse_minor_version "$_zyxel_gs1900_minimum_firmware_version")
+  _debug2 "minimum_minor_version" "$minimum_minor_version"
+
+  _debug2 "firmware_version" "$firmware_version"
+  firmware_major_version=$(_zyxel_gs1900_parse_major_version "$firmware_version")
+  _debug2 "firmware_major_version" "$firmware_major_version"
+  firmware_minor_version=$(_zyxel_gs1900_parse_minor_version "$firmware_version")
+  _debug2 "firmware_minor_version" "$firmware_minor_version"
+
+  _ret=0
+  if [ "$firmware_major_version" -lt "$minimum_major_version" ]; then
+    _ret=1
+  elif [ "$firmware_major_version" -eq "$minimum_major_version" ] && [ "$firmware_minor_version" -lt "$minimum_minor_version" ]; then
+    _ret=1
+  fi
+
+  if [ "$_ret" != "0" ]; then
+    _err "Unsupported firmware version $firmware_version. Please upgrade to at least version $_zyxel_gs1900_minimum_firmware_version."
+  fi
+
+  return $?
+}
+
+_zyxel_gs1900_should_update() {
+  # Get the remote certificate serial number
+  _remote_cert=$(${ACME_OPENSSL_BIN:-openssl} s_client -showcerts -connect "${DEPLOY_ZYXEL_SWITCH}:443" 2>/dev/null </dev/null | sed -ne '/-BEGIN CERTIFICATE-/,/-END CERTIFICATE-/p')
+  _debug3 "_remote_cert" "$_remote_cert"
+
+  _remote_cert_serial=$(printf "%s" "${_remote_cert}" | ${ACME_OPENSSL_BIN:-openssl} x509 -noout -serial)
+  _debug2 "_remote_cert_serial" "$_remote_cert_serial"
+
+  # Get our certificate serial number
+  _our_cert_serial=$(${ACME_OPENSSL_BIN:-openssl} x509 -noout -serial <"${_ccert}")
+  _debug2 "_our_cert_serial" "$_our_cert_serial"
+
+  [ "${_remote_cert_serial}" != "${_our_cert_serial}" ]
+}
+
+_zyxel_gs1900_upload_certificate() {
+  # Generate a PKCS12 certificate with a temporary password since the web interface
+  # requires a password be present. Then upload that certificate.
+  temp_cert_password=$(head /dev/urandom | tr -dc 'A-Za-z0-9' | head -c 64)
+  _secure_debug2 "temp_cert_password" "$temp_cert_password"
+
+  temp_pkcs12="$(_mktemp)"
+  _debug2 "temp_pkcs12" "$temp_pkcs12"
+  _toPkcs "$temp_pkcs12" "$_ckey" "$_ccert" "$_cca" "$temp_cert_password"
+  if [ "$?" != "0" ]; then
+    _err "Failed to generate a pkcs12 certificate."
+    _err "Please re-run with --debug and report a bug."
+
+    # ensure the temporary certificate file is cleaned up
+    [ -f "${temp_pkcs12}" ] && rm -f "${temp_pkcs12}"
+
+    return $?
+  fi
+
+  # Load the upload page
+  upload_page_html=$(_get "${_zyxel_switch_base_uri}/cgi-bin/dispatcher.cgi?cmd=5914" | tr -d '\n')
+
+  # Get the first instance of XSSID from the upload page
+  form_xss_value=$(printf "%s" "$upload_page_html" | _egrep_o 'name="XSSID"\s*value="[^"]+"' | sed 's/^.*="\([^"]\{1,\}\)"$/\1/g' | head -n 1)
+  _secure_debug2 "form_xss_value" "$form_xss_value"
+
+  _info "Generating the certificate upload request"
+  upload_post_request="$(_mktemp)"
+  upload_post_boundary="---------------------------$(date +%Y%m%d%H%M%S)"
+
+  {
+    printf -- "--%s\r\n" "${upload_post_boundary}"
+    printf "Content-Disposition: form-data; name=\"XSSID\"\r\n\r\n%s\r\n" "${form_xss_value}"
+    printf -- "--%s\r\n" "${upload_post_boundary}"
+    printf "Content-Disposition: form-data; name=\"http_file\"; filename=\"temp_pkcs12.pfx\"\r\n"
+    printf "Content-Type: application/pkcs12\r\n\r\n"
+    cat "${temp_pkcs12}"
+    printf "\r\n"
+    printf -- "--%s\r\n" "${upload_post_boundary}"
+    printf "Content-Disposition: form-data; name=\"pwd\"\r\n\r\n%s\r\n" "${temp_cert_password}"
+    printf -- "--%s\r\n" "${upload_post_boundary}"
+    printf "Content-Disposition: form-data; name=\"cmd\"\r\n\r\n%s\r\n" "31"
+    printf -- "--%s\r\n" "${upload_post_boundary}"
+    printf "Content-Disposition: form-data; name=\"sysSubmit\"\r\n\r\n%s\r\n" "Import"
+    printf -- "--%s--\r\n" "${upload_post_boundary}"
+  } >"${upload_post_request}"
+
+  _info "Upload certificate to the switch"
+
+  # Unfortunately we cannot rely upon the switch response across switch models
+  # to return a consistent body return - so we cannot inspect the result of this
+  # upload to determine success.
+  upload_response=$(_zyxel_upload_pkcs12 "${upload_post_request}" "${upload_post_boundary}" 2>&1)
+  _debug3 "Upload response: ${upload_response}"
+  rm "${upload_post_request}"
+
+  # Pause for a few seconds to give the switch a chance to process the certificate
+  # For some reason I've found this to be necessary on my GS1900-24E
+  _debug2 "Waiting 4 seconds for the switch to process the newly uploaded certificate."
+  sleep "4"
+
+  # Check to see whether or not our update was successful
+  _ret=0
+  _zyxel_gs1900_should_update
+  if [ "$?" != "0" ]; then
+    _info "The certificate was updated successfully"
+  else
+    _ret=1
+    _err "The certificate upload does not appear to have worked."
+    _err "The remote certificate does not match the certificate we tried to upload."
+    _err "Please re-run with --debug 2 and review for unexpected errors. If none can be found please submit a bug."
+  fi
+
+  # ensure the temporary files are cleaned up
+  [ -f "${temp_pkcs12}" ] && rm -f "${temp_pkcs12}"
+
+  return $_ret
+}
+
+# make the certificate upload request using either
+# --data binary with @ for file access in CURL
+# or using --post-file for wget to ensure we upload
+# the pkcs12 without getting tripped up on null bytes
+#
+# Usage _zyxel_upload_pkcs12 [body file name] [post boundary marker]
+_zyxel_upload_pkcs12() {
+  bodyfilename="$1"
+  multipartformmarker="$2"
+  _post_url="${_zyxel_switch_base_uri}/cgi-bin/httpuploadcert.cgi"
+  httpmethod="POST"
+  _postContentType="multipart/form-data; boundary=${multipartformmarker}"
+
+  if [ -z "$httpmethod" ]; then
+    httpmethod="POST"
+  fi
+  _debug $httpmethod
+  _debug "_post_url" "$_post_url"
+  _debug2 "bodyfilename" "$bodyfilename"
+  _debug2 "_postContentType" "$_postContentType"
+
+  _inithttp
+
+  if [ "$_ACME_CURL" ] && [ "${ACME_USE_WGET:-0}" = "0" ]; then
+    _CURL="$_ACME_CURL"
+    if [ "$HTTPS_INSECURE" ]; then
+      _CURL="$_CURL --insecure  "
+    fi
+    if [ "$httpmethod" = "HEAD" ]; then
+      _CURL="$_CURL -I  "
+    fi
+    _debug "_CURL" "$_CURL"
+
+    response="$($_CURL --user-agent "$USER_AGENT" -X $httpmethod -H "$_H1" -H "$_H2" -H "$_H3" -H "$_H4" -H "$_H5" --data-binary "@${bodyfilename}" "$_post_url")"
+
+    _ret="$?"
+    if [ "$_ret" != "0" ]; then
+      _err "Please refer to https://curl.haxx.se/libcurl/c/libcurl-errors.html for error code: $_ret"
+      if [ "$DEBUG" ] && [ "$DEBUG" -ge "2" ]; then
+        _err "Here is the curl dump log:"
+        _err "$(cat "$_CURL_DUMP")"
+      fi
+    fi
+  elif [ "$_ACME_WGET" ]; then
+    _WGET="$_ACME_WGET"
+    if [ "$HTTPS_INSECURE" ]; then
+      _WGET="$_WGET --no-check-certificate "
+    fi
+    _debug "_WGET" "$_WGET"
+
+    response="$($_WGET -S -O - --user-agent="$USER_AGENT" --header "$_H5" --header "$_H4" --header "$_H3" --header "$_H2" --header "$_H1" --post-file="${bodyfilename}" "$_post_url" 2>"$HTTP_HEADER")"
+
+    _ret="$?"
+    if [ "$_ret" = "8" ]; then
+      _ret=0
+      _debug "wget returned 8 as the server returned a 'Bad Request' response. Let's process the response later."
+    fi
+    if [ "$_ret" != "0" ]; then
+      _err "Please refer to https://www.gnu.org/software/wget/manual/html_node/Exit-Status.html for error code: $_ret"
+    fi
+    if _contains "$_WGET" " -d "; then
+      # Demultiplex wget debug output
+      cat "$HTTP_HEADER" >&2
+      _sed_i '/^[^ ][^ ]/d; /^ *$/d' "$HTTP_HEADER"
+    fi
+    # remove leading whitespaces from header to match curl format
+    _sed_i 's/^  //g' "$HTTP_HEADER"
+  else
+    _ret="$?"
+    _err "Neither curl nor wget have been found, cannot make $httpmethod request."
+  fi
+  _debug "_ret" "$_ret"
+  printf "%s" "$response"
+  return $_ret
+}
+
+_zyxel_gs1900_trigger_reboot() {
+  # Trigger a reboot via the management reboot page in the web ui
+  reboot_page_html=$(_get "${_zyxel_switch_base_uri}/cgi-bin/dispatcher.cgi?cmd=5888" | tr -d '\n')
+  reboot_xss_value=$(printf "%s" "$reboot_page_html" | _egrep_o 'name="XSSID"\s*value="[^"]+"' | sed 's/^.*="\([^"]\{1,\}\)"$/\1/g')
+  _secure_debug2 "reboot_xss_value" "$reboot_xss_value"
+
+  reboot_response_html=$(_post "XSSID=${reboot_xss_value}&cmd=5889&sysSubmit=Reboot" "${_zyxel_switch_base_uri}/cgi-bin/dispatcher.cgi" '' "POST" "application/x-www-form-urlencoded")
+  reboot_message=$(printf "%s" "$reboot_response_html" | tr -d '\t\r\n\v\f' | _egrep_o "Rebooting now...")
+
+  if [ -z "$reboot_message" ]; then
+    _err "Failed to trigger switch reboot!"
+    return 1
+  fi
+
+  return 0
+}
+
+# password
+_zyxel_gs1900_password_obfuscate() {
+  # Return the password obfuscated via the same method used by the
+  # switch's web UI login process
+  echo "$1" | awk '{
+    encoded = "";
+    password = $1;
+    allowed = "0123456789abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ";
+    len = length($1);
+    pwi = length($1);
+
+    for (i=1; i <= (321 - pwi); i++)
+    {
+      if (0 == i % 5 && pwi > 0)
+      {
+        encoded = (encoded)(substr(password, pwi--, 1));
+      }
+      else if (i == 123)
+      {
+        if (len < 10)
+        {
+          encoded = (encoded)(0);
+        }
+        else
+        {
+          encoded = (encoded)(int(len / 10));
+        }
+      }
+      else if (i == 289)
+      {
+        encoded = (encoded)(len % 10)
+      }
+      else
+      {
+        encoded = (encoded)(substr(allowed, int(rand() * length(allowed)), 1))
+      }
+    }
+    printf("%s", encoded);
+  }'
+}
+
+# html label
+_zyxel_html_table_lookup() {
+  # Look up a value in the html representing the status page of the switch
+  # when provided with the html of the page and the label (i.e. "Model Name:")
+  html="$1"
+  label=$(printf "%s" "$2" | tr -d ' ')
+  lookup_result=$(printf "%s" "$html" | tr -d "\t\r\n\v\f" | sed 's/<tr>/\n<tr>/g' | sed 's/<td[^>]*>/<td>/g' | tr -d ' ' | grep -i "$label" | sed "s/<tr><td>$label<\/td><td>\([^<]\{1,\}\)<\/td><\/tr>/\1/i")
+  printf "%s" "$lookup_result"
+  return 0
+}
+
+# html
+_zyxel_gs1900_get_model() {
+  html="$1"
+  model_name=$(_zyxel_html_table_lookup "$html" "Model Name:")
+  printf "%s" "$model_name"
+}
+
+# html
+_zyxel_gs1900_get_firmware_version() {
+  html="$1"
+  firmware_version=$(_zyxel_html_table_lookup "$html" "Firmware Version:" | _egrep_o "V[^.]+.[^(]+")
+  printf "%s" "$firmware_version"
+}
+
+# version_number
+_zyxel_gs1900_parse_major_version() {
+  printf "%s" "$1" | sed 's/^V\([0-9]\{1,\}\).\{1,\}$/\1/gi'
+}
+
+# version_number
+_zyxel_gs1900_parse_minor_version() {
+  printf "%s" "$1" | sed 's/^.\{1,\}\.\([0-9]\{1,\}\)$/\1/gi'
+}

dnsapi/dns_1984hosting.sh

@@ -128,7 +128,7 @@ _1984hosting_login() {
 
   _get "https://1984.hosting/accounts/login/" | grep "csrfmiddlewaretoken"
   csrftoken="$(grep -i '^set-cookie:' "$HTTP_HEADER" | _egrep_o 'csrftoken=[^;]*;' | tr -d ';')"
-  sessionid="$(grep -i '^set-cookie:' "$HTTP_HEADER" | _egrep_o 'sessionid=[^;]*;' | tr -d ';')"
+  sessionid="$(grep -i '^set-cookie:' "$HTTP_HEADER" | _egrep_o 'cookie1984nammnamm=[^;]*;' | tr -d ';')"
 
   if [ -z "$csrftoken" ] || [ -z "$sessionid" ]; then
     _err "One or more cookies are empty: '$csrftoken', '$sessionid'."
@@ -145,7 +145,7 @@ _1984hosting_login() {
   _debug2 response "$response"
 
   if _contains "$response" '"loggedin": true'; then
-    One984HOSTING_SESSIONID_COOKIE="$(grep -i '^set-cookie:' "$HTTP_HEADER" | _egrep_o 'sessionid=[^;]*;' | tr -d ';')"
+    One984HOSTING_SESSIONID_COOKIE="$(grep -i '^set-cookie:' "$HTTP_HEADER" | _egrep_o 'cookie1984nammnamm=[^;]*;' | tr -d ';')"
     One984HOSTING_CSRFTOKEN_COOKIE="$(grep -i '^set-cookie:' "$HTTP_HEADER" | _egrep_o 'csrftoken=[^;]*;' | tr -d ';')"
     export One984HOSTING_SESSIONID_COOKIE
     export One984HOSTING_CSRFTOKEN_COOKIE

dnsapi/dns_active24.sh

@@ -1,17 +1,17 @@
 #!/usr/bin/env sh
 # shellcheck disable=SC2034
-dns_active24_info='Active24.com
-Site: Active24.com
+dns_active24_info='Active24.cz
+Site: Active24.cz
 Docs: github.com/acmesh-official/acme.sh/wiki/dnsapi#dns_active24
 Options:
- ACTIVE24_Token API Token
+ Active24_ApiKey API Key. Called "Identifier" in the Active24 Admin
+ Active24_ApiSecret API Secret. Called "Secret key" in the Active24 Admin
 Issues: github.com/acmesh-official/acme.sh/issues/2059
-Author: Milan Pála
 '
 
-ACTIVE24_Api="https://api.active24.com"
-
-########  Public functions #####################
+Active24_Api="https://rest.active24.cz"
+# export Active24_ApiKey=ak48l3h7-ak5d-qn4t-p8gc-b6fs8c3l
+# export Active24_ApiSecret=ajvkeo3y82ndsu2smvxy3o36496dcascksldncsq
 
 # Usage: add  _acme-challenge.www.domain.com   "XKrxpRBosdIKFzxW_CT3KLZNf6q0HG9i01zxXp5CPBs"
 # Used to add txt record
@@ -22,8 +22,8 @@ dns_active24_add() {
   _active24_init
 
   _info "Adding txt record"
-  if _active24_rest POST "dns/$_domain/txt/v1" "{\"name\":\"$_sub_domain\",\"text\":\"$txtvalue\",\"ttl\":0}"; then
-    if _contains "$response" "errors"; then
+  if _active24_rest POST "/v2/service/$_service_id/dns/record" "{\"type\":\"TXT\",\"name\":\"$_sub_domain\",\"content\":\"$txtvalue\",\"ttl\":300}"; then
+    if _contains "$response" "error"; then
       _err "Add txt record error."
       return 1
     else
@@ -31,6 +31,7 @@ dns_active24_add() {
       return 0
     fi
   fi
+
   _err "Add txt record error."
   return 1
 }
@@ -44,19 +45,25 @@ dns_active24_rm() {
   _active24_init
 
   _debug "Getting txt records"
-  _active24_rest GET "dns/$_domain/records/v1"
+  # The API needs to send data in body in order the filter to work
+  # TODO: web can also add content $txtvalue to filter and then get the id from response
+  _active24_rest GET "/v2/service/$_service_id/dns/record" "{\"page\":1,\"descending\":true,\"sortBy\":\"name\",\"rowsPerPage\":100,\"totalRecords\":0,\"filters\":{\"type\":[\"TXT\"],\"name\":\"${_sub_domain}\"}}"
+  #_active24_rest GET "/v2/service/$_service_id/dns/record?rowsPerPage=100"
 
-  if _contains "$response" "errors"; then
+  if _contains "$response" "error"; then
     _err "Error"
     return 1
   fi
 
-  hash_ids=$(echo "$response" | _egrep_o "[^{]+${txtvalue}[^}]+" | _egrep_o "hashId\":\"[^\"]+" | cut -c10-)
+  # Note: it might never be more than one record actually, NEEDS more INVESTIGATION
+  record_ids=$(printf "%s" "$response" | _egrep_o "[^{]+${txtvalue}[^}]+" | _egrep_o '"id" *: *[^,]+' | cut -d ':' -f 2)
+  _debug2 record_ids "$record_ids"
 
-  for hash_id in $hash_ids; do
-    _debug "Removing hash_id" "$hash_id"
-    if _active24_rest DELETE "dns/$_domain/$hash_id/v1" ""; then
-      if _contains "$response" "errors"; then
+  for redord_id in $record_ids; do
+    _debug "Removing record_id" "$redord_id"
+    _debug "txtvalue" "$txtvalue"
+    if _active24_rest DELETE "/v2/service/$_service_id/dns/record/$redord_id" ""; then
+      if _contains "$response" "error"; then
         _err "Unable to remove txt record."
         return 1
       else
@@ -70,21 +77,15 @@ dns_active24_rm() {
   return 1
 }
 
-####################  Private functions below ##################################
-#_acme-challenge.www.domain.com
-#returns
-# _sub_domain=_acme-challenge.www
-# _domain=domain.com
-# _domain_id=sdjkglgdfewsdfg
 _get_root() {
   domain=$1
+  i=1
+  p=1
 
-  if ! _active24_rest GET "dns/domains/v1"; then
+  if ! _active24_rest GET "/v1/user/self/service"; then
     return 1
   fi
 
-  i=1
-  p=1
   while true; do
     h=$(printf "%s" "$domain" | cut -d . -f "$i"-100)
     _debug "h" "$h"
@@ -104,21 +105,98 @@ _get_root() {
   return 1
 }
 
-_active24_rest() {
-  m=$1
-  ep="$2"
-  data="$3"
-  _debug "$ep"
+_active24_init() {
+  Active24_ApiKey="${Active24_ApiKey:-$(_readaccountconf_mutable Active24_ApiKey)}"
+  Active24_ApiSecret="${Active24_ApiSecret:-$(_readaccountconf_mutable Active24_ApiSecret)}"
+  #Active24_ServiceId="${Active24_ServiceId:-$(_readaccountconf_mutable Active24_ServiceId)}"
 
-  export _H1="Authorization: Bearer $ACTIVE24_Token"
-
-  if [ "$m" != "GET" ]; then
-    _debug "data" "$data"
-    response="$(_post "$data" "$ACTIVE24_Api/$ep" "" "$m" "application/json")"
-  else
-    response="$(_get "$ACTIVE24_Api/$ep")"
+  if [ -z "$Active24_ApiKey" ] || [ -z "$Active24_ApiSecret" ]; then
+    Active24_ApiKey=""
+    Active24_ApiSecret=""
+    _err "You don't specify Active24 api key and ApiSecret yet."
+    _err "Please create your key and try again."
+    return 1
   fi
 
+  #save the credentials to the account conf file.
+  _saveaccountconf_mutable Active24_ApiKey "$Active24_ApiKey"
+  _saveaccountconf_mutable Active24_ApiSecret "$Active24_ApiSecret"
+
+  _debug "A24 API CHECK"
+  if ! _active24_rest GET "/v2/check"; then
+    _err "A24 API check failed with: $response"
+    return 1
+  fi
+
+  if ! echo "$response" | tr -d " " | grep \"verified\":true >/dev/null; then
+    _err "A24 API check failed with: $response"
+    return 1
+  fi
+
+  _debug "First detect the root zone"
+  if ! _get_root "$fulldomain"; then
+    _err "invalid domain"
+    return 1
+  fi
+
+  _debug _sub_domain "$_sub_domain"
+  _debug _domain "$_domain"
+  _active24_get_service_id "$_domain"
+  _debug _service_id "$_service_id"
+}
+
+_active24_get_service_id() {
+  _d=$1
+  if ! _active24_rest GET "/v1/user/self/zone/${_d}"; then
+    return 1
+  else
+    response=$(echo "$response" | _json_decode)
+    _service_id=$(echo "$response" | _egrep_o '"id" *: *[^,]+' | cut -d ':' -f 2)
+  fi
+}
+
+_active24_rest() {
+  m=$1
+  ep_qs=$2 # with query string
+  # ep=$2
+  ep=$(printf "%s" "$ep_qs" | cut -d '?' -f1) # no query string
+  data="$3"
+
+  _debug "A24 $ep"
+  _debug "A24 $Active24_ApiKey"
+  _debug "A24 $Active24_ApiSecret"
+
+  timestamp=$(_time)
+  datez=$(date -u +"%Y%m%dT%H%M%SZ")
+  canonicalRequest="${m} ${ep} ${timestamp}"
+  signature=$(printf "%s" "$canonicalRequest" | _hmac sha1 "$(printf "%s" "$Active24_ApiSecret" | _hex_dump | tr -d " ")" hex)
+  authorization64="$(printf "%s:%s" "$Active24_ApiKey" "$signature" | _base64)"
+
+  export _H1="Date: ${datez}"
+  export _H2="Accept: application/json"
+  export _H3="Content-Type: application/json"
+  export _H4="Authorization: Basic ${authorization64}"
+
+  _debug2 H1 "$_H1"
+  _debug2 H2 "$_H2"
+  _debug2 H3 "$_H3"
+  _debug2 H4 "$_H4"
+
+  # _sleep 1
+
+  if [ "$m" != "GET" ]; then
+    _debug2 "${m} $Active24_Api${ep_qs}"
+    _debug "data" "$data"
+    response="$(_post "$data" "$Active24_Api${ep_qs}" "" "$m" "application/json")"
+  else
+    if [ -z "$data" ]; then
+      _debug2 "GET $Active24_Api${ep_qs}"
+      response="$(_get "$Active24_Api${ep_qs}")"
+    else
+      _debug2 "GET $Active24_Api${ep_qs} with data: ${data}"
+      response="$(_post "$data" "$Active24_Api${ep_qs}" "" "$m" "application/json")"
+    fi
+  fi
   if [ "$?" != "0" ]; then
     _err "error $ep"
     return 1
@@ -126,23 +204,3 @@ _active24_rest() {
   _debug2 response "$response"
   return 0
 }
-
-_active24_init() {
-  ACTIVE24_Token="${ACTIVE24_Token:-$(_readaccountconf_mutable ACTIVE24_Token)}"
-  if [ -z "$ACTIVE24_Token" ]; then
-    ACTIVE24_Token=""
-    _err "You didn't specify a Active24 api token yet."
-    _err "Please create the token and try again."
-    return 1
-  fi
-
-  _saveaccountconf_mutable ACTIVE24_Token "$ACTIVE24_Token"
-
-  _debug "First detect the root zone"
-  if ! _get_root "$fulldomain"; then
-    _err "invalid domain"
-    return 1
-  fi
-  _debug _sub_domain "$_sub_domain"
-  _debug _domain "$_domain"
-}

dnsapi/dns_ali.sh

@@ -97,12 +97,13 @@ _ali_rest() {
 }
 
 _ali_nonce() {
-  #_head_n 1 </dev/urandom | _digest "sha256" hex | cut -c 1-31
-  #Not so good...
-  date +"%s%N" | sed 's/%N//g'
+  if [ "$ACME_OPENSSL_BIN" ]; then
+    "$ACME_OPENSSL_BIN" rand -hex 16 2>/dev/null && return 0
+  fi
+  printf "%s" "$(date +%s)$$$(date +%N)" | _digest sha256 hex | cut -c 1-32
 }
 
-_timestamp() {
+_ali_timestamp() {
   date -u +"%Y-%m-%dT%H%%3A%M%%3A%SZ"
 }
 
@@ -150,7 +151,7 @@ _check_exist_query() {
   query=$query'&SignatureMethod=HMAC-SHA1'
   query=$query"&SignatureNonce=$(_ali_nonce)"
   query=$query'&SignatureVersion=1.0'
-  query=$query'&Timestamp='$(_timestamp)
+  query=$query'&Timestamp='$(_ali_timestamp)
   query=$query'&TypeKeyWord=TXT'
   query=$query'&Version=2015-01-09'
 }
@@ -166,7 +167,7 @@ _add_record_query() {
   query=$query'&SignatureMethod=HMAC-SHA1'
   query=$query"&SignatureNonce=$(_ali_nonce)"
   query=$query'&SignatureVersion=1.0'
-  query=$query'&Timestamp='$(_timestamp)
+  query=$query'&Timestamp='$(_ali_timestamp)
   query=$query'&Type=TXT'
   query=$query'&Value='$3
   query=$query'&Version=2015-01-09'
@@ -182,7 +183,7 @@ _delete_record_query() {
   query=$query'&SignatureMethod=HMAC-SHA1'
   query=$query"&SignatureNonce=$(_ali_nonce)"
   query=$query'&SignatureVersion=1.0'
-  query=$query'&Timestamp='$(_timestamp)
+  query=$query'&Timestamp='$(_ali_timestamp)
   query=$query'&Version=2015-01-09'
 }
 
@@ -196,7 +197,7 @@ _describe_records_query() {
   query=$query'&SignatureMethod=HMAC-SHA1'
   query=$query"&SignatureNonce=$(_ali_nonce)"
   query=$query'&SignatureVersion=1.0'
-  query=$query'&Timestamp='$(_timestamp)
+  query=$query'&Timestamp='$(_ali_timestamp)
   query=$query'&Version=2015-01-09'
 }
 

dnsapi/dns_aws.sh

@@ -161,7 +161,7 @@ _get_root() {
     h=$(printf "%s" "$domain" | cut -d . -f "$i"-100 | sed 's/\./\\./g')
     _debug "Checking domain: $h"
     if [ -z "$h" ]; then
-      _error "invalid domain"
+      _err "invalid domain"
       return 1
     fi
 

dnsapi/dns_azure.sh

@@ -340,8 +340,17 @@ _azure_getaccess_token() {
 
   if [ "$managedIdentity" = true ]; then
     # https://learn.microsoft.com/en-us/entra/identity/managed-identities-azure-resources/how-to-use-vm-token#get-a-token-using-http
-    export _H1="Metadata: true"
-    response="$(_get http://169.254.169.254/metadata/identity/oauth2/token\?api-version=2018-02-01\&resource=https://management.azure.com/)"
+    if [ -n "$IDENTITY_ENDPOINT" ]; then
+      # Some Azure environments may set IDENTITY_ENDPOINT (formerly MSI_ENDPOINT) to have an alternative metadata endpoint
+      url="$IDENTITY_ENDPOINT?api-version=2019-08-01&resource=https://management.azure.com/"
+      headers="X-IDENTITY-HEADER: $IDENTITY_HEADER"
+    else
+      url="http://169.254.169.254/metadata/identity/oauth2/token?api-version=2018-02-01&resource=https://management.azure.com/"
+      headers="Metadata: true"
+    fi
+
+    export _H1="$headers"
+    response="$(_get "$url")"
     response="$(echo "$response" | _normalizeJson)"
     accesstoken=$(echo "$response" | _egrep_o "\"access_token\":\"[^\"]*\"" | _head_n 1 | cut -d : -f 2 | tr -d \")
     expires_on=$(echo "$response" | _egrep_o "\"expires_on\":\"[^\"]*\"" | _head_n 1 | cut -d : -f 2 | tr -d \")

dnsapi/dns_baidu.sh

@@ -0,0 +1,548 @@
+#!/usr/bin/env sh
+# shellcheck disable=SC2034
+
+# Global variables for returning results (avoid stdout pollution from logging)
+_BAIDU_FIND_RESULT=""
+_BAIDU_BCE_AUTH_RESULT=""
+
+: "${BAIDU_LOG_LEVEL:=2}"
+
+_baidu_log_ts() {
+  date
+}
+
+_baidu_log_ge() {
+  _want="$1"
+  [ "${BAIDU_LOG_LEVEL:-0}" -ge "$_want" ]
+}
+
+_baidu_log() {
+  _lvl="$1"
+  _tag="$2"
+  _msg="$3"
+  if [ "$_lvl" = "0" ] || _baidu_log_ge "$_lvl"; then
+    printf -- "[%s] %s %s\n" "$(_baidu_log_ts)" "$_tag" "$_msg"
+  fi
+}
+
+_baidu_err() {
+  _baidu_log 0 "baidu_bcd.err" "$1"
+  return 1
+}
+
+_baidu_info() {
+  _baidu_log 1 "baidu_bcd.info" "$1"
+  return 0
+}
+
+_baidu_debug() {
+  _baidu_log 2 "$1" "$2"
+  return 0
+}
+
+dns_baidu_info='Baidu Cloud BCD DNS
+Site: cloud.baidu.com
+Docs: https://cloud.baidu.com/doc/BCD/
+Signature: https://cloud.baidu.com/doc/Reference/s/njwvz1yfu
+Options:
+ Baidu_AK AccessKeyId
+ Baidu_SK SecretAccessKey
+OptionsAlt:
+ Baidu_BCD_Host API host, default: bcd.baidubce.com
+ Baidu_BCD_Version API version number, default: 1
+ Baidu_BCD_Expire Signature expiration seconds, default: 3600
+ Baidu_View Resolve view, default: DEFAULT
+ Baidu_TTL Resolve ttl seconds, default: 300
+ Baidu_RM_Max Max records to delete in one run, default: 20
+'
+
+BAIDU_BCD_DEFAULT_HOST="bcd.baidubce.com"
+
+# --- Public API ---
+dns_baidu_add() {
+  fulldomain=$(_idn "$1")
+  txtvalue=$2
+
+  if ! _baidu_prepare_record "$fulldomain"; then
+    _baidu_err "baidu_prepare_record failed for add: $fulldomain"
+    return 1
+  fi
+
+  if ! _baidu_find_record_ids "$_zone_name" "$_record_domain" "TXT" "$txtvalue"; then
+    _baidu_err "baidu_find_record_ids failed for add: $_record_domain.$_zone_name"
+    return 1
+  fi
+  _existing_ids="$_BAIDU_FIND_RESULT"
+  if [ "$_existing_ids" ]; then
+    _baidu_info "txt exists, skip add: $_record_domain.$_zone_name"
+    return 0
+  fi
+
+  _ttl="${Baidu_TTL:-300}"
+  _ttl="$(_baidu_trim_ws "$_ttl")"
+  case "$_ttl" in
+  "" | *[!0-9]*)
+    _ttl="300"
+    ;;
+  esac
+  _view="$(_baidu_trim_ws "${Baidu_View:-DEFAULT}")"
+  txtvalue="$(_baidu_trim_ws "$txtvalue")"
+  _record_domain="$(_baidu_trim_ws "$_record_domain")"
+  _zone_name="$(_baidu_trim_ws "$_zone_name")"
+
+  _body="$(_baidu_payload_add_txt "$_zone_name" "$_record_domain" "$txtvalue" "$_ttl" "$_view")"
+
+  if ! _baidu_bcd_post "/domain/resolve/add" "$_body"; then
+    _baidu_err "baidu_bcd_post failed: add record"
+    return 1
+  fi
+
+  if _baidu_is_api_error "$response"; then
+    _baidu_err "$response"
+    return 1
+  fi
+
+  return 0
+}
+
+dns_baidu_rm() {
+  fulldomain=$(_idn "$1")
+  txtvalue=$2
+
+  if ! _baidu_prepare_record "$fulldomain"; then
+    _baidu_err "baidu_prepare_record failed for delete: $fulldomain"
+    return 1
+  fi
+
+  if ! _baidu_find_record_ids "$_zone_name" "$_record_domain" "TXT" "$txtvalue"; then
+    _baidu_err "baidu_find_record_ids failed for delete: $_record_domain.$_zone_name"
+    return 1
+  fi
+  _ids="$_BAIDU_FIND_RESULT"
+  if [ -z "$_ids" ]; then
+    _baidu_info "no matching txt to delete: $_record_domain.$_zone_name"
+    return 0
+  fi
+
+  _rm_max="${Baidu_RM_Max:-20}"
+  _rm_max="$(_baidu_trim_ws "$_rm_max")"
+  case "$_rm_max" in
+  "" | *[!0-9]*)
+    _rm_max="20"
+    ;;
+  esac
+  _rm_cnt="$(printf "%s\n" "$_ids" | sed '/^$/d' | wc -l | tr -d ' ')"
+  if [ "$_rm_cnt" ] && [ "$_rm_cnt" -gt "$_rm_max" ]; then
+    _baidu_err "Refusing to delete $_rm_cnt records (limit: $_rm_max)"
+    return 1
+  fi
+
+  for _rid in $_ids; do
+    _body="$(_baidu_payload_delete "$_zone_name" "$_rid")"
+    if ! _baidu_bcd_post "/domain/resolve/delete" "$_body"; then
+      _baidu_err "baidu_bcd_post failed: delete recordId=$_rid"
+      return 1
+    fi
+    if _baidu_is_api_error "$response"; then
+      _baidu_err "$response"
+      return 1
+    fi
+  done
+
+  if ! _baidu_find_record_ids "$_zone_name" "$_record_domain" "TXT" "$txtvalue"; then
+    _baidu_err "baidu_find_record_ids failed for delete verify: $_record_domain.$_zone_name"
+    return 1
+  fi
+  _left_ids="$_BAIDU_FIND_RESULT"
+  if [ -z "$_left_ids" ]; then
+    return 0
+  fi
+  if [ -n "$_left_ids" ]; then
+    _baidu_err "delete verification failed: $_record_domain.$_zone_name still has TXT records"
+    return 1
+  fi
+
+  return 0
+}
+
+# --- Config / Record Context ---
+_baidu_load_credentials() {
+  Baidu_AK="${Baidu_AK:-$(_readaccountconf_mutable Baidu_AK)}"
+  Baidu_SK="${Baidu_SK:-$(_readaccountconf_mutable Baidu_SK)}"
+
+  Baidu_AK="$(_baidu_trim_ws "$Baidu_AK")"
+  Baidu_SK="$(_baidu_trim_ws "$Baidu_SK")"
+
+  if [ -z "$Baidu_AK" ] || [ -z "$Baidu_SK" ]; then
+    _baidu_err "Baidu_AK and Baidu_SK are required"
+    return 1
+  fi
+
+  _saveaccountconf_mutable Baidu_AK "$Baidu_AK"
+  _saveaccountconf_mutable Baidu_SK "$Baidu_SK"
+
+  BAIDU_BCD_HOST="${Baidu_BCD_Host:-$BAIDU_BCD_DEFAULT_HOST}"
+  BAIDU_BCD_VERSION="${Baidu_BCD_Version:-1}"
+
+  return 0
+}
+
+_baidu_prepare_record() {
+  _fulldomain="$1"
+  if ! _baidu_load_credentials; then
+    _baidu_err "baidu_load_credentials failed"
+    return 1
+  fi
+  if ! _baidu_get_root "$_fulldomain"; then
+    _baidu_err "Could not find zone for $_fulldomain"
+    return 1
+  fi
+  _record_domain="$_sub_domain"
+  _zone_name="$_domain"
+  return 0
+}
+
+# --- Zone / Records ---
+_baidu_get_root() {
+  domain=$1
+  i=1
+  p=1
+
+  while true; do
+    h=$(printf "%s" "$domain" | cut -d . -f "$i"-100)
+    if [ -z "$h" ]; then
+      _baidu_err "invalid domain: $domain"
+      return 1
+    fi
+
+    if ! _baidu_bcd_post "/domain/resolve/list" "$(_baidu_payload_list "$h" 1 1)"; then
+      _baidu_err "baidu_bcd_post failed: list zones"
+      return 1
+    fi
+    if ! _baidu_is_api_error "$response" && (_contains "$response" "\"totalCount\"" || _contains "$response" "\"result\""); then
+      _sub_domain=$(printf "%s" "$domain" | cut -d . -f 1-"$p")
+      _domain=$h
+      if [ "$_sub_domain" = "$_domain" ]; then
+        _sub_domain="@"
+      fi
+      _baidu_info "zone matched: $_domain (host: $_sub_domain)"
+      return 0
+    fi
+
+    p=$i
+    i=$(_math "$i" + 1)
+  done
+}
+
+_baidu_find_record_ids() {
+  _zone_name="$1"
+  _record_domain="$2"
+  _rdtype="$3"
+  _rdata="$4"
+
+  # Reset global result variable
+  _BAIDU_FIND_RESULT=""
+
+  _zone_name_e="$(_baidu_json_escape "$_zone_name")"
+  _record_domain_e="$(_baidu_json_escape "$_record_domain")"
+  _rdtype_e="$(_baidu_json_escape "$_rdtype")"
+  _rdata_e="$(_baidu_json_escape "$_rdata")"
+
+  _page=1
+  _page_size=100
+  _ids=""
+
+  _max_page=""
+  while true; do
+    if ! _baidu_bcd_post "/domain/resolve/list" "$(_baidu_payload_list "$_zone_name" "$_page" "$_page_size")"; then
+      _baidu_err "baidu_bcd_post failed: list records"
+      return 1
+    fi
+
+    if _baidu_is_api_error "$response"; then
+      _baidu_err "baidu_bcd error: $(_baidu_json_get_str "$response" "code") $(_baidu_json_get_str "$response" "message")"
+      return 1
+    fi
+
+    _normalized="$(
+      printf "%s" "$response" | _normalizeJson
+    )"
+
+    if [ -z "$_max_page" ]; then
+      _total="$(_baidu_parse_totalcount "$_normalized")"
+      _max_page="$(_baidu_calc_max_page "$_total" "$_page_size")"
+    fi
+
+    _records=$(printf "%s" "$_normalized" | sed 's/},{/}\n{/g')
+    while IFS= read -r _line; do
+      _id="$(_baidu_match_record_id "$_line" "$_record_domain_e" "$_rdtype_e" "$_rdata_e")"
+      if [ "$_id" ]; then
+        _ids="$_ids $_id"
+      fi
+    done <<EOF
+$_records
+EOF
+
+    if [ "$_page" -ge "$_max_page" ]; then
+      break
+    fi
+    _page=$(_math "$_page" + 1)
+  done
+
+  # Store result in global variable instead of stdout
+  _BAIDU_FIND_RESULT="$_ids"
+}
+
+# --- HTTP ---
+_baidu_bcd_post() {
+  _api_path="$1"
+  _payload="$2"
+
+  # BCD API requires JSON payload. Some call sites build fragments; normalize defensively.
+  _payload="$(_baidu_normalize_payload "$_payload")"
+
+  _ts="$(date -u +"%Y-%m-%dT%H:%M:%SZ")"
+  _expire="${Baidu_BCD_Expire:-3600}"
+  _content_type="application/json; charset=utf-8"
+  _payload_hash="$(printf "%s" "$_payload" | _digest sha256 hex)"
+
+  _uri="/v${BAIDU_BCD_VERSION}${_api_path}"
+  if ! _baidu_bce_auth "POST" "$_uri" "" "$BAIDU_BCD_HOST" "$_ts" "$_expire" "$_content_type" "$_payload_hash"; then
+    _baidu_err "baidu_bcd auth failed"
+    return 1
+  fi
+  _auth="$_BAIDU_BCE_AUTH_RESULT"
+  if [ -z "$_auth" ]; then
+    _baidu_err "baidu_bcd auth failed"
+    return 1
+  fi
+
+  _H1="Authorization: $_auth"
+  _H2="x-bce-date: $_ts"
+  _H3="x-bce-content-sha256: $_payload_hash"
+  _H4="Host: $BAIDU_BCD_HOST"
+  _H5=""
+
+  _url="https://${BAIDU_BCD_HOST}${_uri}"
+  _signed_headers_dbg="$(printf "%s" "$_auth" | cut -d / -f 5)"
+  _baidu_info "POST ${_uri}"
+  _baidu_info "signedHeaders: $_signed_headers_dbg"
+  _baidu_info "payload_sha256: $_payload_hash"
+  _baidu_debug "baidu_bcd.http.payload" "$(_baidu_dbg_trim "$(_baidu_redact_txt "$_payload")")"
+  response="$(_post "$_payload" "$_url" "" "POST" "$_content_type")"
+  _ret="$?"
+  _baidu_info "ret: $_ret"
+  _req_id="$(_baidu_json_get_str "$response" "requestId")"
+  _code="$(_baidu_json_get_str "$response" "code")"
+  _msg="$(_baidu_json_get_str "$response" "message")"
+  _baidu_info "response: requestId=${_req_id:-"-"} code=${_code:-"-"} message=$(_baidu_dbg_trim "${_msg:-"-"}")"
+  if [ "$_ret" != "0" ]; then
+    _baidu_err "baidu_bcd_post failed: $_uri"
+    return 1
+  fi
+
+  return 0
+}
+
+# --- Auth / Signing ---
+_baidu_bce_auth() {
+  # Signing algorithm (bce-auth-v1):
+  # - SigningKey = HMAC-SHA256-HEX(sk, authStringPrefix)
+  # - Signature  = HMAC-SHA256-HEX(SigningKey, CanonicalRequest)
+  # Reference: https://cloud.baidu.com/doc/Reference/s/njwvz1yfu
+  _method="$1"
+  _uri="$2"
+  _query="$3"
+  _host="$4"
+  _ts="$5"
+  _expire="$6"
+  _ct="$7"
+  _payload_hash="$8"
+
+  _BAIDU_BCE_AUTH_RESULT=""
+
+  _auth_prefix="bce-auth-v1/${Baidu_AK}/${_ts}/${_expire}"
+
+  _signed_headers="content-type;host;x-bce-content-sha256;x-bce-date"
+  _canonical_uri="$(_baidu_bce_encode_path "$_uri")"
+  _canonical_query=""
+
+  _host_v="$(_baidu_trim_ws "$_host")"
+  _date_v="$(_baidu_trim_ws "$_ts")"
+  _ct_v="$(_baidu_trim_ws "$_ct")"
+  _host_e="$(printf "%s" "$_host_v" | _url_encode upper-hex)"
+  _date_e="$(printf "%s" "$_date_v" | _url_encode upper-hex)"
+  _ct_e="$(printf "%s" "$_ct_v" | _url_encode upper-hex)"
+  _hash_e="$(printf "%s" "$_payload_hash" | _url_encode upper-hex)"
+
+  _canonical_headers="content-type:${_ct_e}
+host:${_host_e}
+x-bce-content-sha256:${_hash_e}
+x-bce-date:${_date_e}"
+
+  _canonical_request="${_method}
+${_canonical_uri}
+${_canonical_query}
+${_canonical_headers}"
+
+  _sk_hex="$(printf "%s" "$Baidu_SK" | _hex_dump | tr -d " ")"
+  _signing_key="$(_baidu_hmac_sha256_hexkey "$_sk_hex" "$_auth_prefix")"
+  _signing_key_hex="$(printf "%s" "$_signing_key" | _hex_dump | tr -d " ")"
+  _signature="$(_baidu_hmac_sha256_hexkey "$_signing_key_hex" "$_canonical_request")"
+
+  _baidu_debug "baidu_bcd.auth" "bce_auth"
+  _baidu_debug "baidu_bcd.auth.auth_prefix" "bce-auth-v1/[ak]/${_ts}/${_expire}/$_signed_headers/[signature]"
+  _baidu_debug "baidu_bcd.auth.canonical_request_l" "$(printf "%s" "$_canonical_request" | sed -n 'l')"
+  _baidu_debug "baidu_bcd.auth.signature" "$(printf "%s" "$_signature" | cut -c 1-16)..."
+  _BAIDU_BCE_AUTH_RESULT="${_auth_prefix}/${_signed_headers}/${_signature}"
+  return 0
+}
+
+_baidu_bce_encode_path() {
+  _p="$1"
+  _out=""
+  if [ "${_p#"/"}" != "$_p" ]; then
+    _out="/"
+  fi
+
+  _rest="${_p#/}"
+  while [ -n "$_rest" ]; do
+    _seg="${_rest%%/*}"
+    if [ "$_seg" ]; then
+      if [ -z "$_out" ] || [ "$_out" = "/" ]; then
+        _out="${_out}$(printf "%s" "$_seg" | _url_encode upper-hex)"
+      else
+        _out="${_out}/$(printf "%s" "$_seg" | _url_encode upper-hex)"
+      fi
+    fi
+    if [ "${_rest#*/}" = "$_rest" ]; then
+      break
+    fi
+    _rest="${_rest#*/}"
+  done
+
+  if [ -z "$_out" ]; then
+    _out="/"
+  fi
+  printf "%s" "$_out"
+}
+
+# --- Utils ---
+_baidu_trim() {
+  printf "%s" "$1" | sed 's/^ *//;s/ *$//'
+}
+
+_baidu_trim_ws() {
+  printf "%s" "$1" | tr '\r\n\t' '   ' | tr -s ' ' | sed 's/^ *//;s/ *$//'
+}
+
+_baidu_dbg_trim() {
+  printf "%s" "$1" | tr '\r\n' ' ' | cut -c 1-800
+}
+
+_baidu_is_api_error() {
+  _contains "$1" "\"code\"" && _contains "$1" "\"message\""
+}
+
+_baidu_normalize_payload() {
+  _p="$(_baidu_trim "$(printf "%s" "$1" | tr -d '\r')")"
+  if [ -z "$_p" ]; then
+    printf "%s" ""
+    return 0
+  fi
+  case "$_p" in
+  \{* | \[*)
+    printf "%s" "$_p"
+    ;;
+  *)
+    printf "%s" "{$_p}"
+    ;;
+  esac
+}
+
+_baidu_redact_txt() {
+  printf "%s" "$1" | sed 's/"rdata" *: *"[^"]*"/"rdata":"[redacted]"/g'
+}
+
+_baidu_json_get_str() {
+  _json="$1"
+  _key="$2"
+  printf "%s" "$_json" | _normalizeJson | sed -n "s/.*\"${_key}\" *: *\"\\([^\"]*\\)\".*/\\1/p" | _head_n 1
+}
+
+_baidu_json_escape() {
+  _s="$1"
+  _s="$(printf "%s" "$_s" | tr -d '\r\n')"
+  printf "%s" "$_s" |
+    sed 's/\\/\\\\/g; s/	/\\t/g' |
+    _baidu_json_encode
+}
+
+_baidu_json_encode() {
+  _j_str="$(sed 's/"/\\"/g' | sed "s/\r/\\r/g")"
+  printf "%s" "$_j_str" | _hex_dump | _lower_case | sed 's/0a/5c 6e/g' | tr -d ' ' | _h2b | tr -d "\r\n"
+}
+
+_baidu_payload_list() {
+  _domain="$(_baidu_json_escape "$1")"
+  _pageNo="$2"
+  _pageSize="$3"
+  printf "%s" "{\"domain\":\"${_domain}\",\"pageNo\":${_pageNo},\"pageSize\":${_pageSize}}"
+}
+
+_baidu_payload_add_txt() {
+  _zoneName="$(_baidu_json_escape "$1")"
+  _domain="$(_baidu_json_escape "$2")"
+  _rdata="$(_baidu_json_escape "$3")"
+  _ttl="$4"
+  _view="$(_baidu_json_escape "$5")"
+  printf "%s" "{\"domain\":\"${_domain}\",\"view\":\"${_view}\",\"rdType\":\"TXT\",\"ttl\":${_ttl},\"rdata\":\"${_rdata}\",\"zoneName\":\"${_zoneName}\"}"
+}
+
+_baidu_payload_delete() {
+  _zoneName="$(_baidu_json_escape "$1")"
+  _recordId="$2"
+  printf "%s" "{\"zoneName\":\"${_zoneName}\",\"recordId\":${_recordId}}"
+}
+
+_baidu_parse_totalcount() {
+  _json="$1"
+  printf "%s" "$_json" | _egrep_o "\"totalCount\": *[0-9]*" | _head_n 1 | cut -d : -f 2 | tr -d " "
+}
+
+_baidu_calc_max_page() {
+  _total="$1"
+  _page_size="$2"
+  if [ -z "$_total" ]; then
+    printf "%s" "1"
+    return 0
+  fi
+  _max=$(((_total + _page_size - 1) / _page_size))
+  if [ "$_max" -lt 1 ]; then
+    _max=1
+  fi
+  printf "%s" "$_max"
+}
+
+_baidu_match_record_id() {
+  _line="$1"
+  _domain_e="$2"
+  _rdtype_e="$3"
+  _rdata_e="$4"
+  if ! _contains "$_line" "\"recordId\"" || (! _contains "$_line" "\"domain\":\"$_domain_e\"" && ! _contains "$_line" "\"domain\":\"${_domain_e}.\""); then
+    return 0
+  fi
+  if ! _contains "$_line" "\"rdtype\":\"$_rdtype_e\"" && ! _contains "$_line" "\"rdType\":\"$_rdtype_e\""; then
+    return 0
+  fi
+  if [ "$_rdata_e" ] && ! _contains "$_line" "\"rdata\":\"$_rdata_e\""; then
+    return 0
+  fi
+  printf "%s" "$_line" | _egrep_o "\"recordId\": *[0-9]*" | _head_n 1 | cut -d : -f 2 | tr -d " "
+}
+
+_baidu_hmac_sha256_hexkey() {
+  _key_hex="$1"
+  _msg="$2"
+  printf "%s" "$_msg" | _hmac sha256 "$_key_hex" hex
+}

dnsapi/dns_beget.sh

@@ -7,7 +7,7 @@ Options:
  BEGET_User API user
  BEGET_Password API password
 Issues: github.com/acmesh-official/acme.sh/issues/6200
-Author: ARNik arnik@arnik.ru
+Author: ARNik <arnik@arnik.ru>
 '
 
 Beget_Api="https://api.beget.com/api"

dnsapi/dns_bh.sh

@@ -0,0 +1,202 @@
+#!/usr/bin/env sh
+# shellcheck disable=SC2034
+dns_bh_info='Best-Hosting.cz
+Site: best-hosting.cz
+Docs: github.com/acmesh-official/acme.sh/wiki/dnsapi2#dns_bh
+Options:
+ BH_API_USER API User identifier.
+ BH_API_KEY API Secret key.
+Issues: github.com/acmesh-official/acme.sh/issues/6854
+Author: @heximcz
+'
+
+BH_Api="https://best-hosting.cz/api/v1"
+
+########  Public functions #####################
+
+# Usage: dns_bh_add _acme-challenge.www.domain.com "XKrxpRBosdIKFzxW_CT3KLZNf6q0HG9i01zxXp5CPBs"
+dns_bh_add() {
+  fulldomain=$1
+  txtvalue=$2
+
+  # --- 1. Credentials ---
+  BH_API_USER="${BH_API_USER:-$(_readaccountconf_mutable BH_API_USER)}"
+  BH_API_KEY="${BH_API_KEY:-$(_readaccountconf_mutable BH_API_KEY)}"
+
+  if [ -z "$BH_API_USER" ] || [ -z "$BH_API_KEY" ]; then
+    BH_API_USER=""
+    BH_API_KEY=""
+    _err "You must specify BH_API_USER and BH_API_KEY."
+    return 1
+  fi
+
+  _saveaccountconf_mutable BH_API_USER "$BH_API_USER"
+  _saveaccountconf_mutable BH_API_KEY "$BH_API_KEY"
+
+  # --- 2. Add TXT record ---
+  _info "Adding TXT record for $fulldomain"
+
+  json_payload="{\"fulldomain\":\"$fulldomain\",\"txtvalue\":\"$txtvalue\"}"
+  if ! _bh_rest POST "dns" "$json_payload"; then
+    _err "Failed to add DNS record."
+    return 1
+  fi
+
+  _norm_add=$(printf "%s" "$response" | tr -d '[:space:]')
+  if ! _contains "$_norm_add" '"status":"success"'; then
+    _err "API error: $response"
+    return 1
+  fi
+
+  record_id=$(printf "%s" "$_norm_add" | _egrep_o '"id":[0-9]+' | cut -d':' -f2)
+  _debug record_id "$record_id"
+
+  if [ -z "$record_id" ]; then
+    _err "Could not parse record ID from response."
+    return 1
+  fi
+
+  # Sanitize key — replace dots and hyphens with underscores
+  _conf_key=$(printf "%s" "BH_record_ids_${fulldomain}" | tr '.-' '_')
+
+  # Wildcard support: store space-separated list of IDs
+  # First call stores "111", second call stores "111 222"
+  _existing_ids=$(_readdomainconf "$_conf_key")
+  if [ -z "$_existing_ids" ]; then
+    _savedomainconf "$_conf_key" "$record_id"
+  else
+    _savedomainconf "$_conf_key" "$_existing_ids $record_id"
+  fi
+
+  _info "DNS TXT record added successfully."
+  return 0
+}
+
+# Usage: dns_bh_rm _acme-challenge.www.domain.com "XKrxpRBosdIKFzxW_CT3KLZNf6q0HG9i01zxXp5CPBs"
+dns_bh_rm() {
+  fulldomain=$1
+  txtvalue=$2
+
+  # --- 1. Credentials ---
+  BH_API_USER="${BH_API_USER:-$(_readaccountconf_mutable BH_API_USER)}"
+  BH_API_KEY="${BH_API_KEY:-$(_readaccountconf_mutable BH_API_KEY)}"
+
+  if [ -z "$BH_API_USER" ] || [ -z "$BH_API_KEY" ]; then
+    BH_API_USER=""
+    BH_API_KEY=""
+    _err "You must specify BH_API_USER and BH_API_KEY."
+    return 1
+  fi
+
+  # Sanitize key — same as in add
+  _conf_key=$(printf "%s" "BH_record_ids_${fulldomain}" | tr '.-' '_')
+
+  # --- 2. Load stored record ID(s) ---
+  _existing_ids=$(_readdomainconf "$_conf_key")
+  _debug _existing_ids "$_existing_ids"
+
+  if [ -z "$_existing_ids" ]; then
+    _err "Could not find record ID for $fulldomain."
+    return 1
+  fi
+
+  record_id=""
+  _remaining_ids=""
+
+  # Find the record ID that matches both the name and txtvalue
+  for _id in $_existing_ids; do
+    if ! _bh_rest GET "dns/$_id"; then
+      _debug "Failed to query record id $_id, skipping."
+
+      # Keep it in the list so a later run can try again
+      if [ -z "$_remaining_ids" ]; then
+        _remaining_ids="$_id"
+      else
+        _remaining_ids="$_remaining_ids $_id"
+      fi
+      continue
+    fi
+
+    _match_name=0
+    _match_content=0
+    _norm_response=$(printf "%s" "$response" | tr -d '[:space:]')
+
+    case "$_norm_response" in
+    *"\"name\":\"$fulldomain\""*)
+      _match_name=1
+      ;;
+    esac
+    case "$_norm_response" in
+    *"\"content\":\"$txtvalue\""*)
+      _match_content=1
+      ;;
+    esac
+
+    if [ "$_match_name" -eq 1 ] && [ "$_match_content" -eq 1 ]; then
+      record_id="$_id"
+      _debug "Matched record id" "$record_id"
+      # Do not add this ID to _remaining_ids; it will be deleted
+      continue
+    fi
+
+    # Not a match — keep ID for potential future cleanups
+    if [ -z "$_remaining_ids" ]; then
+      _remaining_ids="$_id"
+    else
+      _remaining_ids="$_remaining_ids $_id"
+    fi
+  done
+
+  if [ -z "$record_id" ]; then
+    _err "Could not find matching TXT record for $fulldomain with the given value."
+    return 1
+  fi
+
+  # --- 3. Delete record ---
+  _info "Removing TXT record for $fulldomain"
+
+  if ! _bh_rest DELETE "dns/$record_id"; then
+    _err "Failed to remove DNS record."
+    return 1
+  fi
+
+  # Update stored list — remove used ID
+  if [ -z "$_remaining_ids" ]; then
+    _cleardomainconf "$_conf_key"
+  else
+    _savedomainconf "$_conf_key" "$_remaining_ids"
+  fi
+
+  _info "DNS TXT record removed successfully."
+  return 0
+}
+
+####################  Private functions #####################
+
+_bh_rest() {
+  m="$1"
+  ep="$2"
+  data="$3"
+  _debug "$ep"
+
+  _credentials="$(printf "%s:%s" "$BH_API_USER" "$BH_API_KEY" | _base64)"
+
+  export _H1="Authorization: Basic $_credentials"
+  export _H2="Content-Type: application/json"
+  export _H3="Accept: application/json"
+
+  if [ "$m" = "GET" ]; then
+    response="$(_get "$BH_Api/$ep")"
+  else
+    _debug data "$data"
+    response="$(_post "$data" "$BH_Api/$ep" "" "$m")"
+  fi
+
+  if [ "$?" != "0" ]; then
+    _err "Error calling $m $BH_Api/$ep"
+    return 1
+  fi
+
+  _debug2 response "$response"
+  return 0
+}

dnsapi/dns_bhosted.sh

@@ -0,0 +1,373 @@
+#!/usr/bin/env sh
+
+# shellcheck disable=SC2034
+dns_bhosted_info='bHosted.nl DNS API
+Site: bHosted.nl
+Docs: https://github.com/acmesh-official/acme.sh/wiki/dnsapi2#dns_bhosted
+Options:
+  BHOSTED_Username      API username
+  BHOSTED_Password      API password (MD5 hash like bHosted web services example)
+  BHOSTED_TTL           TTL for TXT record (default: 300)
+  BHOSTED_SLD           Optional override (useful for multi-part TLDs like co.uk)
+  BHOSTED_TLD           Optional override (useful for multi-part TLDs like co.uk)
+Notes:
+  - Plugin uses addrecord + delrecord for DNS-01 challenge
+  - Record ID is retrieved from addrecord XML response and cached for cleanup
+'
+
+BHOSTED_API_ROOT="https://webservices.bhosted.com/dns"
+
+############  Public functions #####################
+
+# Usage: dns_bhosted_add _acme-challenge.www.example.com "txt-value"
+dns_bhosted_add() {
+  fulldomain="$1"
+  txtvalue="$2"
+
+  _debug "fulldomain" "$fulldomain"
+  _debug "txtvalue" "$txtvalue"
+
+  _bhosted_load_credentials || return 1
+  _bhosted_get_root "$fulldomain" || return 1
+
+  _info "Adding TXT record: ${_bhosted_name}.${_domain}"
+
+  BHOSTED_TTL="${BHOSTED_TTL:-$(_readaccountconf_mutable BHOSTED_TTL)}"
+  BHOSTED_TTL="${BHOSTED_TTL:-300}"
+  _saveaccountconf_mutable BHOSTED_TTL "$BHOSTED_TTL"
+
+  _bhosted_api_add_txt "$_bhosted_sld" "$_bhosted_tld" "$_bhosted_name" "$txtvalue" "$BHOSTED_TTL" || return 1
+
+  # Extract and cache record id in-memory for cleanup in this run
+  _rec_id="$(_bhosted_extract_id "$response")"
+  if [ -n "$_rec_id" ]; then
+    _hash="$(_bhosted_cache_hash "$fulldomain" "$txtvalue")"
+    _debug "_hash" "$_hash"
+    _debug "_rec_id" "$_rec_id"
+    _bhosted_mem_set_id "$_hash" "$_rec_id"
+  else
+    _err "TXT record added but no record id found in response."
+    _err "Cleanup may fail unless bHosted addrecord returns <id>...</id>."
+    _debug2 "add response" "$response"
+    return 1
+  fi
+
+  return 0
+}
+
+# Usage: dns_bhosted_rm _acme-challenge.www.example.com "txt-value"
+dns_bhosted_rm() {
+  fulldomain="$1"
+  txtvalue="$2"
+
+  _debug "fulldomain" "$fulldomain"
+  _debug "txtvalue" "$txtvalue"
+
+  _bhosted_load_credentials || return 1
+  _bhosted_get_root "$fulldomain" || return 1
+
+  _hash="$(_bhosted_cache_hash "$fulldomain" "$txtvalue")"
+  _rec_id="$(_bhosted_mem_get_id "$_hash")"
+
+  if [ -z "$_rec_id" ]; then
+    _err "No cached bHosted record id found for cleanup."
+    _err "Please delete TXT manually in bHosted DNS for: ${_bhosted_name}.${_domain}"
+    return 1
+  fi
+
+  _info "Removing TXT record id=${_rec_id}: ${_bhosted_name}.${_domain}"
+  _bhosted_api_del_record "$_bhosted_sld" "$_bhosted_tld" "$_rec_id" || return 1
+
+  return 0
+}
+
+########  Private functions #####################
+
+_bhosted_load_credentials() {
+  BHOSTED_Username="${BHOSTED_Username:-$(_readaccountconf_mutable BHOSTED_Username)}"
+  BHOSTED_Password="${BHOSTED_Password:-$(_readaccountconf_mutable BHOSTED_Password)}"
+
+  if [ -z "$BHOSTED_Username" ] || [ -z "$BHOSTED_Password" ]; then
+    BHOSTED_Username=""
+    BHOSTED_Password=""
+    _err "You didn't specify bHosted credentials."
+    _err "Please export BHOSTED_Username and BHOSTED_Password (MD5 hash)."
+    return 1
+  fi
+
+  _saveaccountconf_mutable BHOSTED_Username "$BHOSTED_Username"
+  _saveaccountconf_mutable BHOSTED_Password "$BHOSTED_Password"
+
+  return 0
+}
+
+# Determine root zone and host part
+# Supports simple domains automatically (example.com, example.nl)
+# For multi-part TLDs (example.co.uk), set:
+#   BHOSTED_SLD=example
+#   BHOSTED_TLD=co.uk
+_bhosted_get_root() {
+  domain="$1"
+
+  BHOSTED_SLD="${BHOSTED_SLD:-$(_readdomainconf BHOSTED_SLD)}"
+  BHOSTED_TLD="${BHOSTED_TLD:-$(_readdomainconf BHOSTED_TLD)}"
+
+  if [ -n "$BHOSTED_SLD" ] && [ -n "$BHOSTED_TLD" ]; then
+    _savedomainconf BHOSTED_SLD "$BHOSTED_SLD"
+    _savedomainconf BHOSTED_TLD "$BHOSTED_TLD"
+
+    _domain="${BHOSTED_SLD}.${BHOSTED_TLD}"
+    case "$domain" in
+    *."$_domain") ;;
+    "$_domain") ;;
+    *)
+      _err "BHOSTED_SLD/BHOSTED_TLD do not match requested domain: $domain"
+      return 1
+      ;;
+    esac
+
+    _bhosted_sld="$BHOSTED_SLD"
+    _bhosted_tld="$BHOSTED_TLD"
+    _bhosted_name="${domain%."$_domain"}"
+    if [ "$_bhosted_name" = "$domain" ]; then
+      _bhosted_name=""
+    fi
+
+    [ -n "$_bhosted_name" ] || _bhosted_name="@"
+
+    _debug "_domain" "$_domain"
+    _debug "_bhosted_sld" "$_bhosted_sld"
+    _debug "_bhosted_tld" "$_bhosted_tld"
+    _debug "_bhosted_name" "$_bhosted_name"
+    return 0
+  fi
+
+  # Auto-parse: assume last label = tld, label before = sld
+  # Works for .nl / .com / .org etc.
+  _bhosted_tld="$(printf "%s" "$domain" | awk -F. '{print $NF}')"
+  _bhosted_sld="$(printf "%s" "$domain" | awk -F. '{print $(NF-1)}')"
+
+  if [ -z "$_bhosted_sld" ] || [ -z "$_bhosted_tld" ]; then
+    _err "Could not parse SLD/TLD from domain: $domain"
+    return 1
+  fi
+
+  _domain="${_bhosted_sld}.${_bhosted_tld}"
+  _bhosted_name="${domain%."$_domain"}"
+  if [ "$_bhosted_name" = "$domain" ]; then
+    _bhosted_name=""
+  fi
+
+  [ -n "$_bhosted_name" ] || _bhosted_name="@"
+
+  _debug "_domain" "$_domain"
+  _debug "_bhosted_sld" "$_bhosted_sld"
+  _debug "_bhosted_tld" "$_bhosted_tld"
+  _debug "_bhosted_name" "$_bhosted_name"
+
+  return 0
+}
+
+_bhosted_api_add_txt() {
+  _sld="$1"
+  _tld="$2"
+  _name="$3"
+  _content="$4"
+  _ttl="$5"
+
+  _u_user="$(printf "%s" "$BHOSTED_Username" | _url_encode)"
+  _u_pass="$(printf "%s" "$BHOSTED_Password" | _url_encode)"
+  _u_sld="$(printf "%s" "$_sld" | _url_encode)"
+  _u_tld="$(printf "%s" "$_tld" | _url_encode)"
+  _u_name="$(printf "%s" "$_name" | _url_encode)"
+  _u_content="$(printf "%s" "$_content" | _url_encode)"
+  _u_ttl="$(printf "%s" "$_ttl" | _url_encode)"
+
+  _data="user=${_u_user}&password=${_u_pass}&tld=${_u_tld}&sld=${_u_sld}&type=TXT&name=${_u_name}&content=${_u_content}&ttl=${_u_ttl}"
+
+  _debug "bHosted add endpoint" "${BHOSTED_API_ROOT}/addrecord"
+  response="$(_post "$_data" "${BHOSTED_API_ROOT}/addrecord")"
+  _ret="$?"
+
+  _debug2 "bHosted add response" "$response"
+
+  if [ "$_ret" != "0" ]; then
+    _err "bHosted addrecord request failed"
+    return 1
+  fi
+
+  if _bhosted_response_has_error "$response"; then
+    _err "bHosted addrecord returned an error"
+    _debug2 "response" "$response"
+    return 1
+  fi
+
+  return 0
+}
+
+_bhosted_api_del_record() {
+  _sld="$1"
+  _tld="$2"
+  _id="$3"
+
+  _u_user="$(printf "%s" "$BHOSTED_Username" | _url_encode)"
+  _u_pass="$(printf "%s" "$BHOSTED_Password" | _url_encode)"
+  _u_sld="$(printf "%s" "$_sld" | _url_encode)"
+  _u_tld="$(printf "%s" "$_tld" | _url_encode)"
+  _u_id="$(printf "%s" "$_id" | _url_encode)"
+
+  _url="${BHOSTED_API_ROOT}/delrecord"
+  _data="user=${_u_user}&password=${_u_pass}&tld=${_u_tld}&sld=${_u_sld}&id=${_u_id}"
+
+  _debug "bHosted delete endpoint" "$_url"
+  response="$(_post "$_data" "$_url")"
+  _ret="$?"
+
+  _debug2 "bHosted delete response" "$response"
+
+  if [ "$_ret" != "0" ]; then
+    _err "bHosted delrecord request failed"
+    return 1
+  fi
+
+  if _bhosted_response_has_error "$response"; then
+    _err "bHosted delrecord returned an error"
+    _debug2 "response" "$response"
+    return 1
+  fi
+
+  return 0
+}
+
+# Extract XML tag value from response, e.g. <id>12345</id>
+_bhosted_xml_value() {
+  _tag="$1"
+  _resp="$2"
+
+  # Flatten response to simplify parsing
+  _flat="$(printf "%s" "$_resp" | tr -d '\r\n\t')"
+  printf "%s" "$_flat" | sed -n "s:.*<${_tag}>\\([^<]*\\)</${_tag}>.*:\\1:p" | _head_n 1
+}
+
+# Return code convention:
+#   return 0 => response HAS error
+#   return 1 => response has NO error (success)
+_bhosted_response_has_error() {
+  _resp="$1"
+
+  # Empty response = error
+  if [ -z "$_resp" ]; then
+    _debug "Empty API response"
+    return 0
+  fi
+
+  # Prefer explicit bHosted XML response fields
+  if _contains "$_resp" "<response>"; then
+    _errors="$(_bhosted_xml_value "errors" "$_resp")"
+    _done="$(_bhosted_xml_value "done" "$_resp")"
+    _subcommand="$(_bhosted_xml_value "subcommand" "$_resp")"
+    _id="$(_bhosted_xml_value "id" "$_resp")"
+
+    _debug "bHosted XML subcommand" "$_subcommand"
+    _debug "bHosted XML id" "$_id"
+    _debug "bHosted XML errors" "$_errors"
+    _debug "bHosted XML done" "$_done"
+
+    # Success according to provided format
+    if [ "$_errors" = "0" ] && [ "$_done" = "true" ]; then
+      return 1
+    fi
+
+    _debug "bHosted XML indicates failure"
+    return 0
+  fi
+
+  # Fallback for unexpected/non-XML responses
+  _resp_lc="$(_lower_case "$_resp")"
+
+  if _contains "$_resp_lc" "error"; then
+    _debug "Detected 'error' in response"
+    return 0
+  fi
+  if _contains "$_resp_lc" "fout"; then
+    _debug "Detected 'fout' in response"
+    return 0
+  fi
+  if _contains "$_resp_lc" "invalid"; then
+    _debug "Detected 'invalid' in response"
+    return 0
+  fi
+  if _contains "$_resp_lc" "failed"; then
+    _debug "Detected 'failed' in response"
+    return 0
+  fi
+  if _contains "$_resp_lc" "denied"; then
+    _debug "Detected 'denied' in response"
+    return 0
+  fi
+
+  # If no explicit error markers found, assume success
+  return 1
+}
+
+# Extract record id from response
+# Supports bHosted XML first, then generic fallbacks
+_bhosted_extract_id() {
+  _resp="$1"
+
+  # bHosted XML: <id>12345</id>
+  _id="$(_bhosted_xml_value "id" "$_resp" | tr -cd '0-9')"
+  if [ -n "$_id" ]; then
+    printf "%s" "$_id"
+    return 0
+  fi
+
+  # JSON: "id":12345
+  _id="$(printf "%s" "$_resp" | _egrep_o '"id"[[:space:]]*:[[:space:]]*[0-9]+' | _head_n 1 | tr -cd '0-9')"
+  if [ -n "$_id" ]; then
+    printf "%s" "$_id"
+    return 0
+  fi
+
+  # key=value: id=12345
+  _id="$(printf "%s" "$_resp" | _egrep_o '(^|[[:space:][:punct:]])id[[:space:]]*=[[:space:]]*[0-9]+' | _head_n 1 | tr -cd '0-9')"
+  if [ -n "$_id" ]; then
+    printf "%s" "$_id"
+    return 0
+  fi
+
+  # "record id 12345" / "recordid 12345"
+  _id="$(printf "%s" "$_resp" | _egrep_o '(record[[:space:]]*id|recordid)[^0-9]*[0-9]+' | _head_n 1 | tr -cd '0-9')"
+  if [ -n "$_id" ]; then
+    printf "%s" "$_id"
+    return 0
+  fi
+
+  return 1
+}
+
+# Create a unique config key for cached record ids
+_bhosted_cache_hash() {
+  _fd="$1"
+  _tv="$2"
+  # md5 hex of fulldomain|txtvalue
+  printf "%s|%s" "$_fd" "$_tv" | _digest md5 hex
+}
+
+_bhosted_cache_key() {
+  _hash="$1"
+  printf "%s" "BHOSTED_TXT_ID_${_hash}"
+}
+
+_bhosted_mem_set_id() {
+  _hash="$1"
+  _id="$2"
+  _key="$(_bhosted_cache_key "$_hash")"
+  _savedomainconf "$_key" "$_id"
+}
+
+_bhosted_mem_get_id() {
+  _hash="$1"
+  _key="$(_bhosted_cache_key "$_hash")"
+  _readdomainconf "$_key"
+}

dnsapi/dns_bookmyname.sh

@@ -7,7 +7,7 @@ Options:
  BOOKMYNAME_USERNAME Username
  BOOKMYNAME_PASSWORD Password
 Issues: github.com/acmesh-official/acme.sh/issues/3209
-Author: Neilpang
+Author: @Neilpang
 '
 
 ########  Public functions #####################

dnsapi/dns_cf.sh

@@ -92,7 +92,9 @@ dns_cf_add() {
     if _contains "$response" "$txtvalue"; then
       _info "Added, OK"
       return 0
-    elif _contains "$response" "The record already exists"; then
+    elif _contains "$response" "The record already exists" ||
+      _contains "$response" "An identical record already exists." ||
+      _contains "$response" '"code":81058'; then
       _info "Already exists, OK"
       return 0
     else

dnsapi/dns_cloudns.sh

@@ -197,10 +197,11 @@ _dns_cloudns_http_api_call() {
     auth_user="auth-id=$CLOUDNS_AUTH_ID"
   fi
 
+  encoded_password=$(echo "$CLOUDNS_AUTH_PASSWORD" | tr -d "\n\r" | _url_encode)
   if [ -z "$2" ]; then
-    data="$auth_user&auth-password=$CLOUDNS_AUTH_PASSWORD"
+    data="$auth_user&auth-password=$encoded_password"
   else
-    data="$auth_user&auth-password=$CLOUDNS_AUTH_PASSWORD&$2"
+    data="$auth_user&auth-password=$encoded_password&$2"
   fi
 
   response="$(_get "$CLOUDNS_API/$method?$data")"

dnsapi/dns_constellix.sh

@@ -117,7 +117,7 @@ dns_constellix_rm() {
 ####################  Private functions below ##################################
 
 _get_root() {
-  domain=$1
+  domain=$(echo "$1" | _lower_case)
   i=2
   p=1
   _debug "Detecting root zone"
@@ -156,6 +156,9 @@ _constellix_rest() {
   data="$3"
   _debug "$ep"
 
+  # Prevent rate limit
+  _sleep 2
+
   rdate=$(date +"%s")"000"
   hmac=$(printf "%s" "$rdate" | _hmac sha1 "$(printf "%s" "$CONSTELLIX_Secret" | _hex_dump | tr -d ' ')" | _base64)
 

dnsapi/dns_cpanel_uapi.sh

@@ -0,0 +1,269 @@
+#!/usr/bin/env sh
+# shellcheck disable=SC2034
+dns_cpanel_uapi_info='cPanel UAPI
+ Manage DNS via cPanel UAPI. Works with API tokens and Two-Factor Authentication.
+Site: cpanel.net
+Docs: github.com/acmesh-official/acme.sh/wiki/dnsapi2#dns_cpanel_uapi
+Options:
+ cPanel_Username Username
+ cPanel_Apitoken API Token
+ cPanel_Hostname Server URL. E.g. "https://hostname:port"
+ cPanel_TTL optional TXT record TTL in seconds. Default: 120
+Issues: github.com/acmesh-official/acme.sh/issues/6877
+Author: Adam Bodnar
+'
+
+########  Public functions #####################
+
+# Used to add txt record
+dns_cpanel_uapi_add() {
+  fulldomain=$1
+  txtvalue=$2
+
+  _info "Adding TXT record via cPanel UAPI"
+  _debug fulldomain "$fulldomain"
+  _debug txtvalue "$txtvalue"
+
+  if ! _cpanel_uapi_get_root; then
+    _err "No matching root domain for $fulldomain found"
+    return 1
+  fi
+
+  # Build the record name relative to the zone
+  _escaped_domain=$(echo "$_domain" | sed 's/\./\\./g')
+  _record_name=$(echo "$fulldomain" | sed "s/\.${_escaped_domain}$//")
+  _debug "Record name: $_record_name in zone $_domain"
+
+  # Get the current SOA serial (required by mass_edit_zone)
+  if ! _cpanel_uapi_get_serial "$_domain"; then
+    _err "Failed to get zone serial for $_domain"
+    return 1
+  fi
+  _debug "Zone serial: $_serial"
+
+  # Use configurable TTL, default 120 seconds
+  _ttl="${cPanel_TTL:-$(_readaccountconf_mutable cPanel_TTL)}"
+  case "$_ttl" in
+  "")
+    _ttl=120
+    ;;
+  *[!0-9]*)
+    _debug "Invalid cPanel_TTL provided, falling back to default 120"
+    _ttl=120
+    ;;
+  esac
+
+  # Build JSON and URL-encode it for the add parameter
+  _add_json=$(printf '{"dname":"%s","ttl":%s,"record_type":"TXT","data":["%s"]}' "$_record_name" "$_ttl" "$txtvalue")
+  _debug "add_json: $_add_json"
+  _add_json_encoded=$(printf '%s' "$_add_json" | _url_encode)
+  _debug "add_json (encoded): $_add_json_encoded"
+
+  if ! _cpanel_uapi_request "execute/DNS/mass_edit_zone?zone=${_domain}&serial=${_serial}&add=${_add_json_encoded}"; then
+    _err "Request to add TXT record failed for zone $_domain"
+    return 1
+  fi
+  _debug "_result: $_result"
+
+  if _contains "$_result" '"status":1'; then
+    _info "TXT record added successfully"
+    return 0
+  fi
+  _err "Failed to add TXT record."
+  _err "Response: $_result"
+  return 1
+}
+
+# Used to remove the txt record after validation
+dns_cpanel_uapi_rm() {
+  fulldomain=$1
+  txtvalue=$2
+
+  _info "Removing TXT record via cPanel UAPI"
+  _debug fulldomain "$fulldomain"
+  _debug txtvalue "$txtvalue"
+
+  if ! _cpanel_uapi_get_root; then
+    _err "No matching root domain for $fulldomain found"
+    return 1
+  fi
+
+  if ! _cpanel_uapi_findentry; then
+    _info "Entry doesn't exist, nothing to delete"
+    return 0
+  fi
+
+  _debug "Deleting record with line_index=$_line_index"
+  if ! _cpanel_uapi_get_serial "$_domain"; then
+    _err "Failed to get zone serial for $_domain"
+    return 1
+  fi
+  if ! _cpanel_uapi_request "execute/DNS/mass_edit_zone?zone=${_domain}&serial=${_serial}&remove=${_line_index}"; then
+    _err "Request to remove TXT record failed for zone $_domain"
+    return 1
+  fi
+  _debug "_result: $_result"
+
+  if _contains "$_result" '"status":1'; then
+    _info "TXT record removed successfully"
+    return 0
+  fi
+  _err "Failed to remove TXT record."
+  _err "Response: $_result"
+  return 1
+}
+
+####################  Private functions below ##################################
+
+_cpanel_uapi_checkcredentials() {
+  cPanel_Username="${cPanel_Username:-$(_readaccountconf_mutable cPanel_Username)}"
+  cPanel_Apitoken="${cPanel_Apitoken:-$(_readaccountconf_mutable cPanel_Apitoken)}"
+  cPanel_Hostname="${cPanel_Hostname:-$(_readaccountconf_mutable cPanel_Hostname)}"
+
+  if [ -z "$cPanel_Username" ] || [ -z "$cPanel_Apitoken" ] || [ -z "$cPanel_Hostname" ]; then
+    cPanel_Username=""
+    cPanel_Apitoken=""
+    cPanel_Hostname=""
+    _err "You haven't specified cPanel_Username, cPanel_Apitoken, and cPanel_Hostname."
+    return 1
+  fi
+
+  # Remove trailing slash from hostname if present
+  cPanel_Hostname=$(echo "$cPanel_Hostname" | sed 's|/$||')
+
+  _saveaccountconf_mutable cPanel_Username "$cPanel_Username"
+  _saveaccountconf_mutable cPanel_Apitoken "$cPanel_Apitoken"
+  _saveaccountconf_mutable cPanel_Hostname "$cPanel_Hostname"
+
+  if [ -n "$cPanel_TTL" ]; then
+    case "$cPanel_TTL" in
+    *[!0-9]*)
+      _info "Ignoring invalid cPanel_TTL: $cPanel_TTL"
+      cPanel_TTL=""
+      ;;
+    *)
+      _saveaccountconf_mutable cPanel_TTL "$cPanel_TTL"
+      ;;
+    esac
+  fi
+  return 0
+}
+
+_cpanel_uapi_request() {
+  export _H1="Authorization: cpanel $cPanel_Username:$cPanel_Apitoken"
+  _result=$(_get "$cPanel_Hostname/$1")
+  return $?
+}
+
+_cpanel_uapi_get_root() {
+  if ! _cpanel_uapi_checkcredentials; then return 1; fi
+
+  if ! _cpanel_uapi_request "execute/DomainInfo/list_domains"; then
+    _err "Request to cPanel API failed while listing domains"
+    return 1
+  fi
+  _debug "DomainInfo response length: ${#_result}"
+
+  if ! _contains "$_result" '"status":1'; then
+    _err "cPanel UAPI request failed. Is the API token correct?"
+    _debug "Response: $_result"
+    return 1
+  fi
+
+  # Extract main_domain
+  _main_domain=$(echo "$_result" | _egrep_o '"main_domain":"[^"]*"' | _head_n 1 | sed 's/.*"main_domain":"//;s/"//')
+  _debug "main_domain: $_main_domain"
+
+  # Extract addon_domains (array of strings)
+  _addon_domains=$(echo "$_result" | _egrep_o '"addon_domains":\[[^]]*\]' | sed 's/.*"addon_domains":\[//;s/\]$//' | _egrep_o '"[a-zA-Z0-9._-]+"' | sed 's/"//g')
+  _debug "addon_domains: $_addon_domains"
+
+  # Build list of all domains to check
+  _all_domains="$_main_domain $_addon_domains"
+  _debug "All domains: $_all_domains"
+
+  # Find the matching root domain (prefer longest match)
+  _best_match=""
+  _best_len=0
+  for _check_domain in $_all_domains; do
+    if [ -z "$_check_domain" ]; then continue; fi
+    if _endswith "$fulldomain" "$_check_domain"; then
+      _len=${#_check_domain}
+      if [ "$_len" -gt "$_best_len" ]; then
+        _best_match="$_check_domain"
+        _best_len="$_len"
+      fi
+    fi
+  done
+
+  if [ -n "$_best_match" ]; then
+    _domain="$_best_match"
+    _debug "Root domain: $_domain"
+    return 0
+  fi
+  return 1
+}
+
+_cpanel_uapi_get_serial() {
+  _zone="$1"
+  if ! _cpanel_uapi_request "execute/DNS/parse_zone?zone=${_zone}"; then
+    _err "Request to parse zone failed for $_zone"
+    return 1
+  fi
+
+  # Split JSON records onto separate lines using a POSIX-portable sed literal newline
+  # (\\n in sed replacement is a GNU/BusyBox extension; a backslash-newline works everywhere)
+  _soa_line=$(echo "$_result" | sed 's/},{/},\
+{/g' | grep '"record_type":"SOA"' | _head_n 1)
+  _debug "SOA line: $_soa_line"
+
+  if [ -z "$_soa_line" ]; then
+    _err "SOA record not found for zone $_zone"
+    _debug "parse_zone response: $_result"
+    return 1
+  fi
+
+  # Extract the third element from data_b64 array (serial is index 2, 0-based)
+  # data_b64 format: ["ns","admin","SERIAL","refresh","retry","expire","minimum"]
+  _serial_b64=$(echo "$_soa_line" | _egrep_o '"data_b64":\[[^]]*\]' | sed 's/"data_b64":\[//;s/\]//' | sed 's/"//g' | cut -d',' -f3)
+  _debug "serial_b64: $_serial_b64"
+
+  if [ -z "$_serial_b64" ]; then
+    _err "Could not extract serial from SOA record"
+    return 1
+  fi
+
+  _serial=$(printf '%s' "$_serial_b64" | _dbase64)
+  _debug "Decoded serial: $_serial"
+
+  if [ -z "$_serial" ]; then
+    _err "Failed to decode serial"
+    return 1
+  fi
+  return 0
+}
+
+_cpanel_uapi_findentry() {
+  _debug "Finding TXT entry for $fulldomain with value $txtvalue"
+
+  if ! _cpanel_uapi_request "execute/DNS/parse_zone?zone=${_domain}"; then
+    _err "Request to parse zone failed for $_domain"
+    return 1
+  fi
+  _debug "parse_zone result length: ${#_result}"
+
+  # Base64-encode the txtvalue to match against data_b64 in the response
+  _b64_txtvalue=$(printf '%s' "$txtvalue" | _base64)
+  _debug "b64_txtvalue: $_b64_txtvalue"
+
+  # Split records onto separate lines, find matching TXT record by base64 value
+  _line_index=$(echo "$_result" | sed 's/},{/},\
+{/g' | grep '"record_type":"TXT"' | grep -F "$_b64_txtvalue" | _egrep_o '"line_index":[0-9]+' | _head_n 1 | cut -d: -f2)
+  _debug "line_index: $_line_index"
+
+  if [ -n "$_line_index" ]; then
+    _debug "Entry found with line_index=$_line_index"
+    return 0
+  fi
+  return 1
+}

dnsapi/dns_curanet.sh

@@ -15,7 +15,7 @@ CURANET_REST_URL="https://api.curanet.dk/dns/v1/Domains"
 CURANET_AUTH_URL="https://apiauth.dk.team.blue/auth/realms/Curanet/protocol/openid-connect/token"
 CURANET_ACCESS_TOKEN=""
 
-########  Public functions #####################
+########  Public functions ####################
 
 #Usage: dns_curanet_add   _acme-challenge.www.domain.com   "XKrxpRBosdIKFzxW_CT3KLZNf6q0HG9i01zxXp5CPBs"
 dns_curanet_add() {
@@ -154,7 +154,7 @@ _get_root() {
     export _H3="Authorization: Bearer $CURANET_ACCESS_TOKEN"
     response="$(_get "$CURANET_REST_URL/$h/Records" "" "")"
 
-    if [ ! "$(echo "$response" | _egrep_o "Entity not found")" ]; then
+    if [ ! "$(echo "$response" | _egrep_o "Entity not found|Bad Request")" ]; then
       _domain=$h
       return 0
     fi

dnsapi/dns_cyon.sh

@@ -101,6 +101,8 @@ _cyon_load_parameters() {
   # This header is required for curl calls.
   _H1="X-Requested-With: XMLHttpRequest"
   export _H1
+  _H3="User-Agent: cyon-dns-acmesh/1.0"
+  export _H3
 }
 
 _cyon_print_header() {
@@ -125,7 +127,11 @@ _cyon_print_header() {
 }
 
 _cyon_get_cookie_header() {
-  printf "Cookie: %s" "$(grep "cyon=" "$HTTP_HEADER" | grep "^Set-Cookie:" | _tail_n 1 | _egrep_o 'cyon=[^;]*;' | tr -d ';')"
+  # Extract all cookies from the response headers (case-insensitive)
+  _cookies="$(grep -i "^set-cookie:" "$HTTP_HEADER" | sed 's/^[Ss]et-[Cc]ookie: //' | sed 's/;.*//' | tr '\n' '; ' | sed 's/; $//')"
+  if [ -n "$_cookies" ]; then
+    printf "Cookie: %s" "$_cookies"
+  fi
 }
 
 _cyon_login() {
@@ -155,7 +161,12 @@ _cyon_login() {
 
   _get "https://my.cyon.ch/" >/dev/null
 
-  # todo: instead of just checking if the env variable is defined, check if we actually need to do a 2FA auth request.
+  # Update cookie after loading main page (only if new cookies are set)
+  _new_cookies="$(_cyon_get_cookie_header)"
+  if [ -n "$_new_cookies" ]; then
+    _H2="$_new_cookies"
+    export _H2
+  fi
 
   # 2FA authentication with OTP?
   if [ -n "${CY_OTP_Secret}" ]; then
@@ -184,6 +195,13 @@ _cyon_login() {
     fi
 
     _info "    success"
+
+    # Update cookie after 2FA (only if new cookies are set)
+    _new_cookies="$(_cyon_get_cookie_header)"
+    if [ -n "$_new_cookies" ]; then
+      _H2="$_new_cookies"
+      export _H2
+    fi
   fi
 
   _info ""
@@ -205,7 +223,17 @@ _cyon_change_domain_env() {
   domain_env="$(printf "%s" "${fulldomain}" | sed -E -e 's/.*\.(.*\..*)$/\1/')"
   _debug "Changing domain environment to ${domain_env}"
 
-  gloo_item_key="$(_get "https://my.cyon.ch/domain/" | tr '\n' ' ' | sed -E -e "s/.*data-domain=\"${domain_env}\"[^<]*data-itemkey=\"([^\"]*).*/\1/")"
+  domain_page_response="$(_get "https://my.cyon.ch/domain/")"
+  _debug domain_page_response "${domain_page_response}"
+
+  # Check if we got an error response (JSON) instead of HTML
+  if printf "%s" "${domain_page_response}" | grep -q '"iserror":true'; then
+    _err "    $(printf "%s" "${domain_page_response}" | _cyon_get_response_message)"
+    _err ""
+    return 1
+  fi
+
+  gloo_item_key="$(printf "%s" "${domain_page_response}" | tr '\n' ' ' | sed -E -e "s/.*data-domain=\"${domain_env}\"[^<]*data-itemkey=\"([^\"]*).*/\1/")"
   _debug gloo_item_key "${gloo_item_key}"
 
   domain_env_url="https://my.cyon.ch/user/environment/setdomain/d/${domain_env}/gik/${gloo_item_key}"
@@ -304,11 +332,11 @@ _cyon_get_response_message() {
 }
 
 _cyon_get_response_status() {
-  _egrep_o '"status":[a-zA-z0-9]*' | cut -d : -f 2
+  _egrep_o '"status":[a-zA-Z0-9]*' | cut -d : -f 2
 }
 
 _cyon_get_validation_status() {
-  _egrep_o '"valid":[a-zA-z0-9]*' | cut -d : -f 2
+  _egrep_o '"valid":[a-zA-Z0-9]*' | cut -d : -f 2
 }
 
 _cyon_get_response_success() {
@@ -316,7 +344,7 @@ _cyon_get_response_success() {
 }
 
 _cyon_get_environment_change_status() {
-  _egrep_o '"authenticated":[a-zA-z0-9]*' | cut -d : -f 2
+  _egrep_o '"authenticated":[a-zA-Z0-9]*' | cut -d : -f 2
 }
 
 _cyon_check_if_2fa_missed() {

dnsapi/dns_czechia.sh

@@ -0,0 +1,201 @@
+#!/usr/bin/env sh
+
+# dns_czechia.sh - CZECHIA.COM/ZONER DNS API for acme.sh (DNS-01)
+#
+# Documentation: https://api.czechia.com/swagger/index.html
+
+#shellcheck disable=SC2034
+dns_czechia_info='[
+  {"name":"CZ_AuthorizationToken","usage":"Your API token from CZECHIA.COM/Zoner administration.","required":"1"},
+  {"name":"CZ_Zones","usage":"Managed zones separated by comma or space (e.g. \"example.com\").","required":"1"},
+  {"name":"CZ_API_BASE","usage":"Defaults to https://api.czechia.com","required":"0"}
+]'
+
+dns_czechia_add() {
+  fulldomain="$1"
+  txtvalue="$2"
+
+  _debug "dns_czechia_add fulldomain='$fulldomain'"
+
+  if [ -z "$fulldomain" ] || [ -z "$txtvalue" ]; then
+    _err "dns_czechia_add: missing fulldomain or txtvalue"
+    return 1
+  fi
+
+  _czechia_load_conf || return 1
+
+  _current_zone=$(_czechia_pick_zone "$fulldomain")
+  if [ -z "$_current_zone" ]; then
+    _err "No matching zone found for $fulldomain. Please check CZ_Zones."
+    return 1
+  fi
+
+  _cz=$(printf "%s" "$_current_zone" | _lower_case | sed 's/[[:space:]]//g; s/\.$//')
+  _tk=$(printf "%s" "$CZ_AuthorizationToken" | sed 's/^[[:space:]]*//; s/[[:space:]]*$//')
+
+  if [ -z "$_cz" ] || [ -z "$_tk" ]; then
+    _err "Missing zone or CZ_AuthorizationToken."
+    return 1
+  fi
+
+  _url="$CZ_API_BASE/api/DNS/$_cz/TXT"
+  _fd=$(printf "%s" "$fulldomain" | _lower_case | sed 's/\.$//')
+
+  if [ "$_fd" = "$_cz" ]; then
+    _h="@"
+  else
+    # Remove the literal ".<zone>" suffix from _fd, if present
+    _h=${_fd%."$_cz"}
+    [ "$_h" = "$_fd" ] && _h="@"
+  fi
+  [ -z "$_h" ] && _h="@"
+
+  _info "Adding TXT record for $_h in zone $_cz"
+
+  _h_esc=$(printf "%s" "$_h" | sed 's/\\/\\\\/g; s/"/\\"/g')
+  _txt_esc=$(printf "%s" "$txtvalue" | sed 's/\\/\\\\/g; s/"/\\"/g')
+  _body="{\"hostName\":\"$_h_esc\",\"text\":\"$_txt_esc\",\"ttl\":300,\"publishZone\":1}"
+
+  _debug "URL: $_url"
+  _debug "Body: $_body"
+
+  export _H1="Content-Type: application/json"
+  export _H2="AuthorizationToken: $_tk"
+
+  _res="$(_post "$_body" "$_url" "" "POST")"
+  _post_exit="$?"
+  _debug2 "Response: $_res"
+
+  if [ "$_post_exit" -ne 0 ]; then
+    _err "API request failed. exit code $_post_exit"
+    return 1
+  fi
+
+  if _contains "$_res" "already exists"; then
+    _info "Record already exists, skipping."
+    return 0
+  fi
+
+  _nres="$(_normalizeJson "$_res")"
+  if [ "$?" -ne 0 ] || [ -z "$_nres" ]; then
+    _nres="$_res"
+  fi
+
+  if _contains "$_nres" "\"status\":4" || _contains "$_nres" "\"status\":5" || _contains "$_nres" "\"errors\""; then
+    _err "API error: $_res"
+    return 1
+  fi
+
+  return 0
+}
+
+dns_czechia_rm() {
+  fulldomain="$1"
+  txtvalue="$2"
+
+  _debug "dns_czechia_rm fulldomain='$fulldomain'"
+
+  if [ -z "$fulldomain" ] || [ -z "$txtvalue" ]; then
+    _err "dns_czechia_rm: missing fulldomain or txtvalue"
+    return 1
+  fi
+
+  _czechia_load_conf || return 1
+
+  _current_zone=$(_czechia_pick_zone "$fulldomain")
+  if [ -z "$_current_zone" ]; then
+    _err "No matching zone found for $fulldomain. Please check CZ_Zones configuration."
+    return 1
+  fi
+
+  _cz=$(printf "%s" "$_current_zone" | _lower_case | sed 's/[[:space:]]//g; s/\.$//')
+  _tk=$(printf "%s" "$CZ_AuthorizationToken" | sed 's/^[[:space:]]*//; s/[[:space:]]*$//')
+
+  if [ -z "$_cz" ] || [ -z "$_tk" ]; then
+    _err "Missing zone or CZ_AuthorizationToken."
+    return 1
+  fi
+
+  _url="$CZ_API_BASE/api/DNS/$_cz/TXT"
+  _fd=$(printf "%s" "$fulldomain" | _lower_case | sed 's/\.$//')
+
+  if [ "$_fd" = "$_cz" ]; then
+    _h="@"
+  else
+    _h=$(printf "%s" "$_fd" | sed "s/\.$_cz$//")
+    [ "$_h" = "$_fd" ] && _h="@"
+  fi
+  [ -z "$_h" ] && _h="@"
+
+  _h_esc=$(printf "%s" "$_h" | sed 's/\\/\\\\/g; s/"/\\"/g')
+  _txt_esc=$(printf "%s" "$txtvalue" | sed 's/\\/\\\\/g; s/"/\\"/g')
+  _body="{\"hostName\":\"$_h_esc\",\"text\":\"$_txt_esc\",\"ttl\":300,\"publishZone\":1}"
+
+  _debug "URL: $_url"
+  _debug "Body: $_body"
+
+  export _H1="Content-Type: application/json"
+  export _H2="AuthorizationToken: $_tk"
+
+  _res="$(_post "$_body" "$_url" "" "DELETE")"
+  _post_exit="$?"
+  _debug2 "Response: $_res"
+
+  if [ "$_post_exit" -ne 0 ]; then
+    _err "CZECHIA DNS API DELETE request failed for $_fd: exit code $_post_exit, response: $_res"
+    return 1
+  fi
+
+  _res_normalized=$(printf '%s' "$_res" | _normalizeJson)
+
+  if _contains "$_res_normalized" '"isError":true'; then
+    _err "CZECHIA DNS API reported an error while deleting TXT for $_fd: $_res"
+    return 1
+  fi
+
+  return 0
+}
+
+_czechia_load_conf() {
+  CZ_AuthorizationToken="${CZ_AuthorizationToken:-$(_readaccountconf_mutable CZ_AuthorizationToken)}"
+  if [ -z "$CZ_AuthorizationToken" ]; then
+    _err "Missing CZ_AuthorizationToken"
+    return 1
+  fi
+
+  CZ_Zones="${CZ_Zones:-$(_readaccountconf_mutable CZ_Zones)}"
+  if [ -z "$CZ_Zones" ]; then
+    _err "Missing CZ_Zones"
+    return 1
+  fi
+
+  CZ_API_BASE="${CZ_API_BASE:-$(_readaccountconf_mutable CZ_API_BASE)}"
+  [ -z "$CZ_API_BASE" ] && CZ_API_BASE="https://api.czechia.com"
+
+  _saveaccountconf_mutable CZ_AuthorizationToken "$CZ_AuthorizationToken"
+  _saveaccountconf_mutable CZ_Zones "$CZ_Zones"
+  _saveaccountconf_mutable CZ_API_BASE "$CZ_API_BASE"
+
+  return 0
+}
+
+_czechia_pick_zone() {
+  _fd=$(printf "%s" "$1" | _lower_case | sed 's/\.$//')
+  _best_zone=""
+
+  _zones_space=$(printf "%s" "$CZ_Zones" | sed 's/,/ /g')
+  for _z in $_zones_space; do
+    _clean_z=$(printf "%s" "$_z" | _lower_case | sed 's/[[:space:]]//g; s/\.$//')
+    [ -z "$_clean_z" ] && continue
+
+    case "$_fd" in
+    "$_clean_z" | *."$_clean_z")
+      if [ ${#_clean_z} -gt ${#_best_zone} ]; then
+        _best_zone="$_clean_z"
+      fi
+      ;;
+    esac
+  done
+
+  printf "%s" "$_best_zone"
+}

dnsapi/dns_ddnss.sh

@@ -6,7 +6,7 @@ Docs: github.com/acmesh-official/acme.sh/wiki/dnsapi#dns_ddnss
 Options:
  DDNSS_Token API Token
 Issues: github.com/acmesh-official/acme.sh/issues/2230
-Author: RaidenII, helbgd, mod242
+Author: @helbgd, @mod242
 '
 
 DDNSS_DNS_API="https://ddnss.de/upd.php"

dnsapi/dns_dnshome.sh

@@ -7,7 +7,7 @@ Options:
  DNSHOME_Subdomain Subdomain
  DNSHOME_SubdomainPassword Subdomain Password
 Issues: github.com/acmesh-official/acme.sh/issues/3819
-Author: dnsHome.de https://github.com/dnsHome-de
+Author: @dnsHome-de
 '
 
 # Usage: add subdomain.ddnsdomain.tld "XKrxpRBosdIKFzxW_CT3KLZNf6q0HG9i01zxXp5CPBs"

dnsapi/dns_duckdns.sh

@@ -5,7 +5,7 @@ Site: www.DuckDNS.org
 Docs: github.com/acmesh-official/acme.sh/wiki/dnsapi#dns_duckdns
 Options:
  DuckDNS_Token API Token
-Author: RaidenII
+Author: @RaidenII
 '
 
 DuckDNS_API="https://www.duckdns.org/update"

dnsapi/dns_dyn.sh

@@ -8,7 +8,7 @@ Options:
  DYN_Customer Customer
  DYN_Username API Username
  DYN_Password Secret
-Author: Gerd Naschenweng <https://github.com/magicdude4eva>
+Author: Gerd Naschenweng <@magicdude4eva>
 '
 
 # Dyn Managed DNS API

dnsapi/dns_dynv6.sh

@@ -8,7 +8,7 @@ Options:
 OptionsAlt:
  KEY Path to SSH private key file. E.g. "/root/.ssh/dynv6"
 Issues: github.com/acmesh-official/acme.sh/issues/2702
-Author: StefanAbl
+Author: @StefanAbl
 '
 
 dynv6_api="https://dynv6.com/api/v2"
@@ -107,7 +107,7 @@ _get_domain() {
       return 0
     fi
   done
-  _err "Either their is no such host on your dnyv6 account or it cannot be accessed with this key"
+  _err "Either there is no such host on your dynv6 account, or it cannot be accessed with this key"
   return 1
 }
 
@@ -179,8 +179,8 @@ _dns_dynv6_rm_http() {
   fi
 }
 
+#Usage: _get_zone_id $record
 #get the zoneid for a specifc record or zone
-#usage: _get_zone_id §record
 #where $record is the record to get the id for
 #returns _zone_id the id of the zone
 _get_zone_id() {
@@ -189,7 +189,6 @@ _get_zone_id() {
   _dynv6_rest GET zones
 
   zones="$(echo "$response" | tr '}' '\n' | tr ',' '\n' | grep name | sed 's/\[//g' | tr -d '{' | tr -d '"')"
-  #echo $zones
 
   selected=""
   for z in $zones; do
@@ -217,9 +216,9 @@ _get_zone_name() {
   _zone_name="${_zone_name#name:}"
 }
 
-#usaage _get_record_id $zone_id $record
-# where zone_id is thevalue returned by _get_zone_id
-# and record ist in the form _acme.www for an fqdn of _acme.www.example.com
+#usage _get_record_id $zone_id $record
+# where zone_id is the value returned by _get_zone_id
+# and record is in the form _acme.www for an fqdn of _acme.www.example.com
 # returns _record_id
 _get_record_id() {
   _zone_id="$1"
@@ -234,8 +233,7 @@ _get_record_id() {
 
 _get_record_id_from_response() {
   response="$1"
-  _record_id="$(echo "$response" | tr '}' '\n' | grep "\"name\":\"$record\"" | grep "\"data\":\"$value\"" | tr ',' '\n' | grep id | tr -d '"' | tr -d 'id:')"
-  #_record_id="${_record_id#id:}"
+  _record_id="$(echo "$response" | tr '}' '\n' | grep "\"name\":\"$record\"" | grep "\"data\":\"$value\"" | tr ',' '\n' | grep '"id":' | tr -d '"' | tr -d 'id:' | tr -d '{')"
   if [ -z "$_record_id" ]; then
     _err "no such record: $record found in zone $_zone_id"
     return 1

dnsapi/dns_easydns.sh

@@ -7,7 +7,7 @@ Options:
  EASYDNS_Token API Token
  EASYDNS_Key API Key
 Issues: github.com/acmesh-official/acme.sh/issues/2647
-Author: Neilpang, wurzelpanzer <wurzelpanzer@maximolider.net>
+Author: @Neilpang, wurzelpanzer <wurzelpanzer@maximolider.net>
 '
 
 # API Documentation: https://sandbox.rest.easydns.net:3001/

dnsapi/dns_edgecenter.sh

@@ -1,13 +1,13 @@
 #!/usr/bin/env sh
 # shellcheck disable=SC2034
-
-# EdgeCenter DNS API integration for acme.sh
-# Author: Konstantin Ruchev <konstantin.ruchev@edgecenter.ru>
-dns_edgecenter_info='edgecenter DNS API
-Site: https://edgecenter.ru
-Docs: github.com/acmesh-official/acme.sh/wiki/dnsapi#dns_edgecenter
+dns_edgecenter_info='EdgeCenter.ru
+Site: EdgeCenter.ru
+Docs: github.com/acmesh-official/acme.sh/wiki/dnsapi2#dns_edgecenter
 Options:
- EDGECENTER_API_KEY auth APIKey'
+ EDGECENTER_API_KEY API Key
+Issues: github.com/acmesh-official/acme.sh/issues/6313
+Author: Konstantin Ruchev <konstantin.ruchev@edgecenter.ru>
+'
 
 EDGECENTER_API="https://api.edgecenter.ru"
 DOMAIN_TYPE=

dnsapi/dns_efficientip.sh

@@ -0,0 +1,139 @@
+#!/usr/bin/env sh
+# shellcheck disable=SC2034
+dns_efficientip_info='efficientip.com
+Site: https://efficientip.com/
+Docs: github.com/acmesh-official/acme.sh/wiki/dnsapi2#dns_efficientip
+Options:
+  EfficientIP_Creds HTTP Basic Authentication credentials. E.g. "username:password"
+  EfficientIP_Server EfficientIP SOLIDserver Management IP address or FQDN.
+  EfficientIP_DNS_Name Name of the DNS smart or server hosting the zone. Optional.
+  EfficientIP_View Name of the DNS view hosting the zone. Optional.
+OptionsAlt:
+  EfficientIP_Token_Key Alternative API token key, prefered over basic authentication.
+  EfficientIP_Token_Secret Alternative API token secret, required when using a token key.
+  EfficientIP_Server EfficientIP SOLIDserver Management IP address or FQDN.
+  EfficientIP_DNS_Name Name of the DNS smart or server hosting the zone. Optional.
+  EfficientIP_View Name of the DNS view hosting the zone. Optional.
+Issues: github.com/acmesh-official/acme.sh/issues/6325
+Author: EfficientIP-Labs <contact@efficientip.com>
+'
+
+dns_efficientip_add() {
+  fulldomain=$1
+  txtvalue=$2
+
+  _info "Using EfficientIP API"
+  _debug fulldomain "$fulldomain"
+  _debug txtvalue "$txtvalue"
+
+  if { [ -z "${EfficientIP_Creds}" ] && { [ -z "${EfficientIP_Token_Key}" ] || [ -z "${EfficientIP_Token_Secret}" ]; }; } || [ -z "${EfficientIP_Server}" ]; then
+    EfficientIP_Creds=""
+    EfficientIP_Token_Key=""
+    EfficientIP_Token_Secret=""
+    EfficientIP_Server=""
+    _err "You didn't specify any EfficientIP credentials or token or server (EfficientIP_Creds; EfficientIP_Token_Key; EfficientIP_Token_Secret; EfficientIP_Server)."
+    _err "Please set them via EXPORT EfficientIP_Creds=username:password or EXPORT EfficientIP_server=ip/hostname"
+    _err "or if you want to use Token instead EXPORT EfficientIP_Token_Key=yourkey"
+    _err "and EXPORT EfficientIP_Token_Secret=yoursecret"
+    _err "then try again."
+    return 1
+  fi
+
+  if [ -z "${EfficientIP_DNS_Name}" ]; then
+    EfficientIP_DNS_Name=""
+  fi
+
+  EfficientIP_DNSNameEncoded=$(printf "%b" "${EfficientIP_DNS_Name}" | _url_encode)
+
+  if [ -z "${EfficientIP_View}" ]; then
+    EfficientIP_View=""
+  fi
+
+  EfficientIP_ViewEncoded=$(printf "%b" "${EfficientIP_View}" | _url_encode)
+
+  _saveaccountconf EfficientIP_Creds "${EfficientIP_Creds}"
+  _saveaccountconf EfficientIP_Token_Key "${EfficientIP_Token_Key}"
+  _saveaccountconf EfficientIP_Token_Secret "${EfficientIP_Token_Secret}"
+  _saveaccountconf EfficientIP_Server "${EfficientIP_Server}"
+  _saveaccountconf EfficientIP_DNS_Name "${EfficientIP_DNS_Name}"
+  _saveaccountconf EfficientIP_View "${EfficientIP_View}"
+
+  export _H1="Accept-Language:en-US"
+  baseurlnObject="https://${EfficientIP_Server}/rest/dns_rr_add?rr_type=TXT&rr_ttl=300&rr_name=${fulldomain}&rr_value1=${txtvalue}"
+
+  if [ "${EfficientIP_DNSNameEncoded}" != "" ]; then
+    baseurlnObject="${baseurlnObject}&dns_name=${EfficientIP_DNSNameEncoded}"
+  fi
+
+  if [ "${EfficientIP_ViewEncoded}" != "" ]; then
+    baseurlnObject="${baseurlnObject}&dnsview_name=${EfficientIP_ViewEncoded}"
+  fi
+
+  if [ -z "${EfficientIP_Token_Secret}" ] || [ -z "${EfficientIP_Token_Key}" ]; then
+    EfficientIP_CredsEncoded=$(printf "%b" "${EfficientIP_Creds}" | _base64)
+    export _H2="Authorization: Basic ${EfficientIP_CredsEncoded}"
+  else
+    TS=$(date +%s)
+    Sig=$(printf "%b\n$TS\nPOST\n$baseurlnObject" "${EfficientIP_Token_Secret}" | _digest sha3-256 hex)
+    EfficientIP_CredsEncoded=$(printf "%b:%b" "${EfficientIP_Token_Key}" "$Sig")
+    export _H2="Authorization: SDS ${EfficientIP_CredsEncoded}"
+    export _H3="X-SDS-TS: ${TS}"
+  fi
+
+  result="$(_post "" "${baseurlnObject}" "" "POST")"
+
+  if [ "$(echo "${result}" | _egrep_o "ret_oid")" ]; then
+    _info "DNS record successfully created"
+    return 0
+  else
+    _err "Error creating DNS record"
+    _err "${result}"
+    return 1
+  fi
+}
+
+dns_efficientip_rm() {
+  fulldomain=$1
+  txtvalue=$2
+
+  _info "Using EfficientIP API"
+  _debug fulldomain "${fulldomain}"
+  _debug txtvalue "${txtvalue}"
+
+  EfficientIP_ViewEncoded=$(printf "%b" "${EfficientIP_View}" | _url_encode)
+  EfficientIP_DNSNameEncoded=$(printf "%b" "${EfficientIP_DNS_Name}" | _url_encode)
+  EfficientIP_CredsEncoded=$(printf "%b" "${EfficientIP_Creds}" | _base64)
+
+  export _H1="Accept-Language:en-US"
+
+  baseurlnObject="https://${EfficientIP_Server}/rest/dns_rr_delete?rr_type=TXT&rr_name=$fulldomain&rr_value1=$txtvalue"
+  if [ "${EfficientIP_DNSNameEncoded}" != "" ]; then
+    baseurlnObject="${baseurlnObject}&dns_name=${EfficientIP_DNSNameEncoded}"
+  fi
+
+  if [ "${EfficientIP_ViewEncoded}" != "" ]; then
+    baseurlnObject="${baseurlnObject}&dnsview_name=${EfficientIP_ViewEncoded}"
+  fi
+
+  if [ -z "$EfficientIP_Token_Secret" ] || [ -z "$EfficientIP_Token_Key" ]; then
+    EfficientIP_CredsEncoded=$(printf "%b" "${EfficientIP_Creds}" | _base64)
+    export _H2="Authorization: Basic $EfficientIP_CredsEncoded"
+  else
+    TS=$(date +%s)
+    Sig=$(printf "%b\n$TS\nDELETE\n${baseurlnObject}" "${EfficientIP_Token_Secret}" | _digest sha3-256 hex)
+    EfficientIP_CredsEncoded=$(printf "%b:%b" "${EfficientIP_Token_Key}" "$Sig")
+    export _H2="Authorization: SDS ${EfficientIP_CredsEncoded}"
+    export _H3="X-SDS-TS: $TS"
+  fi
+
+  result="$(_post "" "${baseurlnObject}" "" "DELETE")"
+
+  if [ "$(echo "${result}" | _egrep_o "ret_oid")" ]; then
+    _info "DNS Record successfully deleted"
+    return 0
+  else
+    _err "Error deleting DNS record"
+    _err "${result}"
+    return 1
+  fi
+}

dnsapi/dns_exoscale.sh

@@ -8,9 +8,9 @@ Options:
  EXOSCALE_SECRET_KEY API Secret key
 '
 
-EXOSCALE_API=https://api.exoscale.com/dns/v1
+EXOSCALE_API="https://api-ch-gva-2.exoscale.com/v2"
 
-########  Public functions #####################
+########  Public functions  ########
 
 # Usage: add  _acme-challenge.www.domain.com   "XKrxpRBosdIKFzxW_CT3KLZNf6q0HG9i01zxXp5CPBs"
 # Used to add txt record
@@ -18,159 +18,197 @@ dns_exoscale_add() {
   fulldomain=$1
   txtvalue=$2
 
-  if ! _checkAuth; then
+  _debug "Using Exoscale DNS v2 API"
+  _debug fulldomain "$fulldomain"
+  _debug txtvalue "$txtvalue"
+
+  if ! _check_auth; then
     return 1
   fi
 
-  _debug "First detect the root zone"
-  if ! _get_root "$fulldomain"; then
-    _err "invalid domain"
+  root_domain_id=$(_get_root_domain_id "$fulldomain")
+  if [ -z "$root_domain_id" ]; then
+    _err "Unable to determine root domain ID for $fulldomain"
     return 1
   fi
+  _debug root_domain_id "$root_domain_id"
 
-  _debug _sub_domain "$_sub_domain"
-  _debug _domain "$_domain"
+  # Always get the subdomain part first
+  sub_domain=$(_get_sub_domain "$fulldomain" "$root_domain_id")
+  _debug sub_domain "$sub_domain"
 
-  _info "Adding record"
-  if _exoscale_rest POST "domains/$_domain_id/records" "{\"record\":{\"name\":\"$_sub_domain\",\"record_type\":\"TXT\",\"content\":\"$txtvalue\",\"ttl\":120}}" "$_domain_token"; then
-    if _contains "$response" "$txtvalue"; then
-      _info "Added, OK"
-      return 0
-    fi
+  # Build the record name properly
+  if [ -z "$sub_domain" ]; then
+    record_name="_acme-challenge"
+  else
+    record_name="_acme-challenge.$sub_domain"
   fi
-  _err "Add txt record error."
-  return 1
 
+  payload=$(printf '{"name":"%s","type":"TXT","content":"%s","ttl":120}' "$record_name" "$txtvalue")
+  _debug payload "$payload"
+
+  response=$(_exoscale_rest POST "/dns-domain/${root_domain_id}/record" "$payload")
+  if _contains "$response" "\"id\""; then
+    _info "TXT record added successfully."
+    return 0
+  else
+    _err "Error adding TXT record: $response"
+    return 1
+  fi
 }
 
-# Usage: fulldomain txtvalue
-# Used to remove the txt record after validation
 dns_exoscale_rm() {
   fulldomain=$1
-  txtvalue=$2
 
-  if ! _checkAuth; then
+  _debug "Using Exoscale DNS v2 API for removal"
+  _debug fulldomain "$fulldomain"
+
+  if ! _check_auth; then
     return 1
   fi
 
-  _debug "First detect the root zone"
-  if ! _get_root "$fulldomain"; then
-    _err "invalid domain"
+  root_domain_id=$(_get_root_domain_id "$fulldomain")
+  if [ -z "$root_domain_id" ]; then
+    _err "Unable to determine root domain ID for $fulldomain"
     return 1
   fi
 
-  _debug _sub_domain "$_sub_domain"
-  _debug _domain "$_domain"
-
-  _debug "Getting txt records"
-  _exoscale_rest GET "domains/${_domain_id}/records?type=TXT&name=$_sub_domain" "" "$_domain_token"
-  if _contains "$response" "\"name\":\"$_sub_domain\"" >/dev/null; then
-    _record_id=$(echo "$response" | tr '{' "\n" | grep "\"content\":\"$txtvalue\"" | _egrep_o "\"id\":[^,]+" | _head_n 1 | cut -d : -f 2 | tr -d \")
+  record_name="_acme-challenge"
+  sub_domain=$(_get_sub_domain "$fulldomain" "$root_domain_id")
+  if [ -n "$sub_domain" ]; then
+    record_name="_acme-challenge.$sub_domain"
   fi
 
-  if [ -z "$_record_id" ]; then
-    _err "Can not get record id to remove."
+  record_id=$(_find_record_id "$root_domain_id" "$record_name")
+  if [ -z "$record_id" ]; then
+    _err "TXT record not found for deletion."
     return 1
   fi
 
-  _debug "Deleting record $_record_id"
-
-  if ! _exoscale_rest DELETE "domains/$_domain_id/records/$_record_id" "" "$_domain_token"; then
-    _err "Delete record error."
+  response=$(_exoscale_rest DELETE "/dns-domain/$root_domain_id/record/$record_id")
+  if _contains "$response" "\"state\":\"success\""; then
+    _info "TXT record deleted successfully."
+    return 0
+  else
+    _err "Error deleting TXT record: $response"
     return 1
   fi
-
-  return 0
 }
 
-####################  Private functions below ##################################
+########  Private helpers  ########
 
-_checkAuth() {
+_check_auth() {
   EXOSCALE_API_KEY="${EXOSCALE_API_KEY:-$(_readaccountconf_mutable EXOSCALE_API_KEY)}"
   EXOSCALE_SECRET_KEY="${EXOSCALE_SECRET_KEY:-$(_readaccountconf_mutable EXOSCALE_SECRET_KEY)}"
-
   if [ -z "$EXOSCALE_API_KEY" ] || [ -z "$EXOSCALE_SECRET_KEY" ]; then
-    EXOSCALE_API_KEY=""
-    EXOSCALE_SECRET_KEY=""
-    _err "You don't specify Exoscale application key and application secret yet."
-    _err "Please create you key and try again."
+    _err "EXOSCALE_API_KEY and EXOSCALE_SECRET_KEY must be set."
     return 1
   fi
-
   _saveaccountconf_mutable EXOSCALE_API_KEY "$EXOSCALE_API_KEY"
   _saveaccountconf_mutable EXOSCALE_SECRET_KEY "$EXOSCALE_SECRET_KEY"
-
   return 0
 }
 
-#_acme-challenge.www.domain.com
-#returns
-# _sub_domain=_acme-challenge.www
-# _domain=domain.com
-# _domain_id=sdjkglgdfewsdfg
-# _domain_token=sdjkglgdfewsdfg
-_get_root() {
-
-  if ! _exoscale_rest GET "domains"; then
-    return 1
-  fi
-
+_get_root_domain_id() {
   domain=$1
-  i=2
-  p=1
+  i=1
   while true; do
-    h=$(printf "%s" "$domain" | cut -d . -f "$i"-100)
-    _debug h "$h"
-    if [ -z "$h" ]; then
-      #not valid
-      return 1
-    fi
-
-    if _contains "$response" "\"name\":\"$h\"" >/dev/null; then
-      _domain_id=$(echo "$response" | tr '{' "\n" | grep "\"name\":\"$h\"" | _egrep_o "\"id\":[^,]+" | _head_n 1 | cut -d : -f 2 | tr -d \")
-      _domain_token=$(echo "$response" | tr '{' "\n" | grep "\"name\":\"$h\"" | _egrep_o "\"token\":\"[^\"]*\"" | _head_n 1 | cut -d : -f 2 | tr -d \")
-      if [ "$_domain_token" ] && [ "$_domain_id" ]; then
-        _sub_domain=$(printf "%s" "$domain" | cut -d . -f 1-"$p")
-        _domain=$h
-        return 0
+    candidate=$(printf "%s" "$domain" | cut -d . -f "${i}-100")
+    [ -z "$candidate" ] && return 1
+    _debug "Trying root domain candidate: $candidate"
+    domains=$(_exoscale_rest GET "/dns-domain")
+    # Extract from dns-domains array
+    result=$(echo "$domains" | _egrep_o '"dns-domains":\[.*\]' | _egrep_o '\{"id":"[^"]*","created-at":"[^"]*","unicode-name":"[^"]*"\}' | while read -r item; do
+      name=$(echo "$item" | _egrep_o '"unicode-name":"[^"]*"' | cut -d'"' -f4)
+      id=$(echo "$item" | _egrep_o '"id":"[^"]*"' | cut -d'"' -f4)
+      if [ "$name" = "$candidate" ]; then
+        echo "$id"
+        break
       fi
-      return 1
+    done)
+    if [ -n "$result" ]; then
+      echo "$result"
+      return 0
     fi
-    p=$i
     i=$(_math "$i" + 1)
   done
-  return 1
 }
 
-# returns response
+_get_sub_domain() {
+  fulldomain=$1
+  root_id=$2
+  root_info=$(_exoscale_rest GET "/dns-domain/$root_id")
+  _debug root_info "$root_info"
+  root_name=$(echo "$root_info" | _egrep_o "\"unicode-name\":\"[^\"]*\"" | cut -d\" -f4)
+  sub=${fulldomain%%."$root_name"}
+
+  if [ "$sub" = "_acme-challenge" ]; then
+    echo ""
+  else
+    # Remove _acme-challenge. prefix to get the actual subdomain
+    echo "${sub#_acme-challenge.}"
+  fi
+}
+
+_find_record_id() {
+  root_id=$1
+  name=$2
+  records=$(_exoscale_rest GET "/dns-domain/$root_id/record")
+
+  # Convert search name to lowercase for case-insensitive matching
+  name_lower=$(echo "$name" | tr '[:upper:]' '[:lower:]')
+
+  echo "$records" | _egrep_o '\{[^}]*"name":"[^"]*"[^}]*\}' | while read -r record; do
+    record_name=$(echo "$record" | _egrep_o '"name":"[^"]*"' | cut -d'"' -f4)
+    record_name_lower=$(echo "$record_name" | tr '[:upper:]' '[:lower:]')
+    if [ "$record_name_lower" = "$name_lower" ]; then
+      echo "$record" | _egrep_o '"id":"[^"]*"' | _head_n 1 | cut -d'"' -f4
+      break
+    fi
+  done
+}
+
+_exoscale_sign() {
+  k=$1
+  shift
+  hex_key=$(printf %b "$k" | _hex_dump | tr -d ' ')
+  printf %s "$@" | _hmac sha256 "$hex_key"
+}
+
 _exoscale_rest() {
   method=$1
-  path="$2"
-  data="$3"
-  token="$4"
-  request_url="$EXOSCALE_API/$path"
-  _debug "$path"
+  path=$2
+  data=$3
+
+  url="${EXOSCALE_API}${path}"
+  expiration=$(_math "$(date +%s)" + 300) # 5m from now
+
+  # Build the message with the actual body or empty line
+  message=$(printf "%s %s\n%s\n\n\n%s" "$method" "/v2$path" "$data" "$expiration")
+  signature=$(_exoscale_sign "$EXOSCALE_SECRET_KEY" "$message" | _base64)
+  auth="EXO2-HMAC-SHA256 credential=${EXOSCALE_API_KEY},expires=${expiration},signature=${signature}"
+
+  _debug "API request: $method $url"
+  _debug "Signed message: [$message]"
+  _debug "Authorization header: [$auth]"
 
   export _H1="Accept: application/json"
-
-  if [ "$token" ]; then
-    export _H2="X-DNS-Domain-Token: $token"
-  else
-    export _H2="X-DNS-Token: $EXOSCALE_API_KEY:$EXOSCALE_SECRET_KEY"
-  fi
+  export _H2="Authorization: ${auth}"
 
   if [ "$data" ] || [ "$method" = "DELETE" ]; then
     export _H3="Content-Type: application/json"
     _debug data "$data"
-    response="$(_post "$data" "$request_url" "" "$method")"
+    response="$(_post "$data" "$url" "" "$method")"
   else
-    response="$(_get "$request_url" "" "" "$method")"
+    response="$(_get "$url" "" "" "$method")"
   fi
 
-  if [ "$?" != "0" ]; then
-    _err "error $request_url"
+  # shellcheck disable=SC2181
+  if [ "$?" -ne 0 ]; then
+    _err "error $url"
     return 1
   fi
   _debug2 response "$response"
+  echo "$response"
   return 0
 }

dnsapi/dns_fornex.sh

@@ -95,7 +95,7 @@ _get_root() {
       return 1
     fi
 
-    if ! _rest GET "dns/domain/"; then
+    if ! _rest GET "dns/domain/?q=$h"; then
       return 1
     fi
 

dnsapi/dns_freedns.sh

@@ -7,7 +7,7 @@ Options:
  FREEDNS_User Username
  FREEDNS_Password Password
 Issues: github.com/acmesh-official/acme.sh/issues/2305
-Author: David Kerr <https://github.com/dkerr64>
+Author: David Kerr <@dkerr64>
 '
 
 ########  Public functions #####################

dnsapi/dns_freemyip.sh

@@ -1,11 +1,11 @@
 #!/usr/bin/env sh
 # shellcheck disable=SC2034
 dns_freemyip_info='FreeMyIP.com
-Site: freemyip.com
+Site: FreeMyIP.com
 Docs: github.com/acmesh-official/acme.sh/wiki/dnsapi2#dns_freemyip
 Options:
  FREEMYIP_Token API Token
-Issues: github.com/acmesh-official/acme.sh/issues/{XXXX}
+Issues: github.com/acmesh-official/acme.sh/issues/6247
 Author: Recolic Keghart <root@recolic.net>, @Giova96
 '
 

dnsapi/dns_gandi_livedns.sh

@@ -23,6 +23,8 @@ dns_gandi_livedns_add() {
   fulldomain=$1
   txtvalue=$2
 
+  GANDI_LIVEDNS_KEY="${GANDI_LIVEDNS_KEY:-$(_readaccountconf_mutable GANDI_LIVEDNS_KEY)}"
+  GANDI_LIVEDNS_TOKEN="${GANDI_LIVEDNS_TOKEN:-$(_readaccountconf_mutable GANDI_LIVEDNS_TOKEN)}"
   if [ -z "$GANDI_LIVEDNS_KEY" ] && [ -z "$GANDI_LIVEDNS_TOKEN" ]; then
     _err "No Token or API key (deprecated) specified for Gandi LiveDNS."
     _err "Create your token or key and export it as GANDI_LIVEDNS_KEY or GANDI_LIVEDNS_TOKEN respectively"
@@ -31,11 +33,11 @@ dns_gandi_livedns_add() {
 
   # Keep only one secret in configuration
   if [ -n "$GANDI_LIVEDNS_TOKEN" ]; then
-    _saveaccountconf GANDI_LIVEDNS_TOKEN "$GANDI_LIVEDNS_TOKEN"
-    _clearaccountconf GANDI_LIVEDNS_KEY
+    _saveaccountconf_mutable GANDI_LIVEDNS_TOKEN "$GANDI_LIVEDNS_TOKEN"
+    _clearaccountconf_mutable GANDI_LIVEDNS_KEY
   elif [ -n "$GANDI_LIVEDNS_KEY" ]; then
-    _saveaccountconf GANDI_LIVEDNS_KEY "$GANDI_LIVEDNS_KEY"
-    _clearaccountconf GANDI_LIVEDNS_TOKEN
+    _saveaccountconf_mutable GANDI_LIVEDNS_KEY "$GANDI_LIVEDNS_KEY"
+    _clearaccountconf_mutable GANDI_LIVEDNS_TOKEN
   fi
 
   _debug "First detect the root zone"

dnsapi/dns_gname.sh

@@ -0,0 +1,303 @@
+#!/usr/bin/env sh
+# shellcheck disable=SC2034
+dns_gname_info='GNAME
+Site: www.gname.com
+Docs: github.com/acmesh-official/acme.sh/wiki/dnsapi#dns_gname
+Options:
+ GNAME_APPID Your APPID
+ GNAME_APPKEY Your APPKEY
+ GNAME_TTL DNS resolution record TTL value, default 120.
+Issues: github.com/acmesh-official/acme.sh/issues/6874
+Author: GNDevProd <tech@gname.com>
+'
+
+GNAME_TLD_Api="https://www.gname.com/request/tlds?lx=all"
+GNAME_Api="https://api.gname.com"
+GNAME_TLDS_CACHE=""
+
+########  Public functions #####################
+
+#Usage: add  _acme-challenge.www.domain.com   "T1rxqRBosdIK90xWCG3KLZNf6q_0HG9i01zxXp5CAS3"
+dns_gname_add() {
+  fulldomain=$1
+  txtvalue=$(printf "%s" "$2" | _url_encode)
+  #Compatible with gname API RFC 1738 standard URL encoding
+  txtvalue=$(printf '%s' "$txtvalue" | sed 's/%20/+/g')
+
+  GNAME_APPID="${GNAME_APPID:-$(_readaccountconf_mutable GNAME_APPID)}"
+  GNAME_APPKEY="${GNAME_APPKEY:-$(_readaccountconf_mutable GNAME_APPKEY)}"
+  GNAME_TTL="${GNAME_TTL:-$(_readaccountconf_mutable GNAME_TTL)}"
+  GNAME_TTL="${GNAME_TTL:-120}"
+
+  if [ -z "$GNAME_APPID" ] || [ -z "$GNAME_APPKEY" ]; then
+    GNAME_APPID=""
+    GNAME_APPKEY=""
+    _err "You have not configured the APPID and APPKEY for the GNAME API."
+    _err "You can get yours from here https://www.gname.com/domain/api."
+    return 1
+  fi
+
+  _saveaccountconf_mutable GNAME_APPID "$GNAME_APPID"
+  _saveaccountconf_mutable GNAME_APPKEY "$GNAME_APPKEY"
+  _saveaccountconf_mutable GNAME_TTL "$GNAME_TTL"
+
+  if ! _extract_domain "$fulldomain"; then
+    _err "Failed to extract domain. Please check your network or API response."
+    return 1
+  fi
+
+  gntime=$(date +%s)
+
+  #If the hostname is empty, you need to replace it with @.
+  final_hostname=$(printf "%s" "${ext_hostname:-@}" | _url_encode)
+
+  # Parameters need to be sorted by key
+  body="appid=$GNAME_APPID&exist=1&gntime=$gntime&jlz=$txtvalue&lang=us&lx=TXT&mx=0&ttl=$GNAME_TTL&xl=0&ym=$ext_domain&zj=$final_hostname"
+
+  _info "Adding TXT record for $ext_domain, host: $final_hostname"
+
+  if _post_to_api "/api/resolution/add" "$body"; then
+    _info "Successfully added DNS record."
+    return 0
+  else
+    _err "Failed to add DNS record via Gname API."
+    return 1
+  fi
+}
+
+#Usage: remove  _acme-challenge.www.domain.com   "T1rxqRBosdIK90xWCG3KLZNf6q_0HG9i01zxXp5CASc"
+dns_gname_rm() {
+  fulldomain=$1
+  txtvalue=$2
+
+  GNAME_APPID="${GNAME_APPID:-$(_readaccountconf_mutable GNAME_APPID)}"
+  GNAME_APPKEY="${GNAME_APPKEY:-$(_readaccountconf_mutable GNAME_APPKEY)}"
+
+  if [ -z "$GNAME_APPID" ] || [ -z "$GNAME_APPKEY" ]; then
+    GNAME_APPID=""
+    GNAME_APPKEY=""
+    _err "You have not configured the APPID and APPKEY for the GNAME API."
+    _err "You can get yours from here https://www.gname.com/domain/api."
+    return 1
+  fi
+
+  _saveaccountconf_mutable GNAME_APPID "$GNAME_APPID"
+  _saveaccountconf_mutable GNAME_APPKEY "$GNAME_APPKEY"
+
+  if ! _extract_domain "$fulldomain"; then
+    _err "Failed to extract domain. Please check your network or API response."
+    return 1
+  fi
+
+  final_hostname="${ext_hostname:-@}"
+
+  _debug "Query DNS record ID $ext_domain $final_hostname $txtvalue"
+
+  if ! record_id=$(_get_record_id "$ext_domain" "$final_hostname" "$txtvalue"); then
+    _err "Error occurred during record lookup. Skipping deletion to avoid errors."
+    return 1
+  fi
+
+  if [ -z "$record_id" ]; then
+    _info "DNS record not found, skip removing."
+    return 0
+  fi
+
+  _debug "DNS record ID:$record_id"
+  gntime=$(date +%s)
+  body="appid=$GNAME_APPID&gntime=$gntime&jxid=$record_id&lang=us&ym=$ext_domain"
+
+  if ! _post_to_api "/api/resolution/delete" "$body"; then
+    _err "DNS record deletion failed"
+    return 1
+  fi
+
+  _info "DNS record deletion successful"
+  return 0
+}
+
+# Find the DNS record ID by hostname, record type, and record value.
+_get_record_id() {
+  target_ym="$1"
+  target_zjt="$2"
+  target_jxz="$3"
+  target_lx="TXT"
+
+  GNAME_APPID="${GNAME_APPID:-$(_readaccountconf_mutable GNAME_APPID)}"
+  GNAME_APPKEY="${GNAME_APPKEY:-$(_readaccountconf_mutable GNAME_APPKEY)}"
+  gntime=$(date +%s)
+  body="appid=$GNAME_APPID&gntime=$gntime&limit=1000&lx=$target_lx&page=1&ym=$target_ym"
+
+  if ! _post_to_api "/api/resolution/list" "$body"; then
+    _err "Query and parsing records failed"
+    return 1
+  fi
+
+  clean_response=$(echo "$post_response" | tr -d '\r')
+  records=$(echo "$clean_response" | sed 's/.*"data":\[//; s/\],"count".*//; s/},/}\n/g' | grep "^{")
+  matched_rows=$(echo "$records" | grep -Fi "\"zjt\":\"$target_zjt\"")
+
+  if [ -z "$matched_rows" ]; then
+    _debug "No records found for host: $target_zjt"
+    return 0
+  fi
+
+  exact_row=$(echo "$matched_rows" | grep -F "\"jxz\":\"$target_jxz\"" | _head_n 1)
+  dns_record_id=""
+  if [ -n "$exact_row" ]; then
+    dns_record_id=$(echo "$exact_row" | _egrep_o "\"id\":\"[^\"]*\"" | _head_n 1 | cut -d : -f 2 | tr -d '"')
+  fi
+
+  if [ -n "$dns_record_id" ]; then
+    _debug "Successfully found exact record ID: $dns_record_id"
+    printf "%s" "$dns_record_id"
+    return 0
+  fi
+
+  _debug "Can not find exact DNS record match for: $target_zjt"
+  return 0
+}
+
+# Request GNAME API,post_response: Response content
+_post_to_api() {
+  uri=$1
+  body=$2
+  url="$GNAME_Api$uri"
+  gntoken=$(_gntoken "$body")
+  body="$body&gntoken=$gntoken"
+  post_response="$(_post "$body" "$url" "" "POST" "application/x-www-form-urlencoded")"
+
+  http_err_code=$?
+  if [ "$http_err_code" != "0" ]; then
+    _err "POST API $url request failed:$http_err_code"
+    return 1
+  fi
+
+  normalized_response="$(echo "$post_response" | _normalizeJson)"
+  if [ -z "$normalized_response" ]; then
+    _err "Failed to normalize JSON response for [$uri]"
+    return 1
+  fi
+
+  ret_code=$(echo "$normalized_response" | sed 's/.*"code":\([-0-9]*\).*/\1/')
+
+  if [ "$ret_code" = "1" ]; then
+    return 0
+  fi
+
+  if [ "$uri" = "/api/resolution/add" ]; then
+    if _contains "$normalized_response" "the same host records and record values"; then
+      _info "DNS record already exists, treat as success."
+      return 0
+    fi
+  fi
+
+  ret_msg=$(echo "$normalized_response" | sed 's/.*"msg":"\([^"]*\)".*/\1/')
+  _err "POST API $url error: [$ret_code] $ret_msg"
+  _debug "Full response: $normalized_response"
+  return 1
+}
+
+# Split the complete domain into a host and a main domain.
+# example, www.gname.com can be split into ext_hostname=www,ext_domain=gname.com
+_extract_domain() {
+
+  host="$1"
+
+  # Prioritize reading from the cache and reduce network caching
+  if [ -z "$GNAME_TLDS_CACHE" ]; then
+    GNAME_TLDS_CACHE=$(_get_suffixes_json)
+  fi
+
+  if [ -z "$GNAME_TLDS_CACHE" ]; then
+    _err "The list of domain suffixes is empty after retrieval; cannot extract domain"
+    return 1
+  fi
+
+  main_part=$(echo "$GNAME_TLDS_CACHE" | sed 's/.*"main":\[\([^]]*\)\].*/\1/' | tr -d '"' | tr ',' ' ')
+  sub_part=$(echo "$GNAME_TLDS_CACHE" | sed 's/.*"sub":\[\([^]]*\)\].*/\1/' | tr -d '"' | tr ',' ' ')
+  suffix_list=$(echo "$main_part $sub_part" | tr -s ' ' | sed 's/^[ ]//;s/[ ]$//')
+
+  dot_count=$(echo "$host" | _egrep_o "\." | wc -l)
+
+  if [ "$dot_count" -eq 0 ]; then
+    _err "Invalid domain format: $host (missing dot)"
+    return 1
+  fi
+
+  if [ "$dot_count" -eq 1 ]; then
+    ext_hostname=""
+    ext_domain="$host"
+
+  elif [ "$dot_count" -gt 1 ]; then
+    matched_suffix=""
+    for suffix in $suffix_list; do
+      case "$host" in
+      *".$suffix")
+        if [ -z "$matched_suffix" ] || [ "${#suffix}" -gt "${#matched_suffix}" ]; then
+          matched_suffix="$suffix"
+        fi
+        ;;
+      esac
+    done
+
+    if [ -n "$matched_suffix" ]; then
+      prefix="${host%."$matched_suffix"}"
+      main_name="${prefix##*.}"
+      ext_domain="$main_name.$matched_suffix"
+    else
+      _tld="${host##*.}"
+      _tmp="${host%.*}"
+      _main="${_tmp##*.}"
+      ext_domain="$_main.$_tld"
+    fi
+
+    if [ "$host" = "$ext_domain" ]; then
+      ext_hostname=""
+    else
+      ext_hostname="${host%."$ext_domain"}"
+    fi
+
+  fi
+  _debug "ext_hostname:$ext_hostname"
+  _debug "ext_domain:$ext_domain"
+  return 0
+}
+
+# Obtain the list of domain suffixes via API
+_get_suffixes_json() {
+  _debug "GET request URL: $GNAME_TLD_Api Retrieves a list of domain suffixes."
+
+  if ! response="$(_get "$GNAME_TLD_Api")"; then
+    _err "Failed to retrieve list of domain suffixes"
+    return 1
+  fi
+
+  if [ -z "$response" ]; then
+    _err "The list of domain suffixes is empty"
+    return 1
+  fi
+
+  normalized_response="$(echo "$response" | _normalizeJson)"
+  if [ -z "$normalized_response" ]; then
+    _err "Failed to normalize JSON response for domain suffix list"
+    return 1
+  fi
+
+  if ! _contains "$normalized_response" "\"code\":1"; then
+    _err "Failed to retrieve list of domain name suffixes; code is not 1"
+    return 1
+  fi
+
+  echo "$normalized_response"
+  return 0
+}
+
+# Generate API authentication signature
+_gntoken() {
+  data_to_sign="$1"
+  full_data="${data_to_sign}${GNAME_APPKEY}"
+  hash=$(printf "%s" "$full_data" | _digest md5 hex | tr -d ' ')
+  hash_upper=$(echo "$hash" | _upper_case)
+  printf "%s" "$hash_upper"
+}

dnsapi/dns_he_ddns.sh

@@ -5,6 +5,7 @@ Site: dns.he.net
 Docs: github.com/acmesh-official/acme.sh/wiki/dnsapi2#dns_he_ddns
 Options:
  HE_DDNS_KEY The DDNS key
+Issues: https://github.com/acmesh-official/acme.sh/issues/5238
 Author: Markku Leiniö
 '
 

dnsapi/dns_hetznercloud.sh

@@ -0,0 +1,593 @@
+#!/usr/bin/env sh
+# shellcheck disable=SC2034
+dns_hetznercloud_info='Hetzner Cloud DNS
+Site: Hetzner.com
+Docs: github.com/acmesh-official/acme.sh/wiki/dnsapi2#dns_hetznercloud
+Options:
+ HETZNER_TOKEN API token for the Hetzner Cloud DNS API
+Optional:
+ HETZNER_TTL Custom TTL for new TXT rrsets (default 120)
+ HETZNER_API Override API endpoint (default https://api.hetzner.cloud/v1)
+ HETZNER_MAX_ATTEMPTS Number of 1s polls to wait for async actions (default 120)
+Issues: github.com/acmesh-official/acme.sh/issues
+'
+
+HETZNERCLOUD_API_DEFAULT="https://api.hetzner.cloud/v1"
+HETZNERCLOUD_TTL_DEFAULT=120
+HETZNER_MAX_ATTEMPTS_DEFAULT=120
+
+########  Public functions #####################
+
+dns_hetznercloud_add() {
+  fulldomain="$(_idn "${1}")"
+  txtvalue="${2}"
+
+  _info "Using Hetzner Cloud DNS API to add record"
+
+  if ! _hetznercloud_init; then
+    return 1
+  fi
+
+  if ! _hetznercloud_prepare_zone "${fulldomain}"; then
+    _err "Unable to determine Hetzner Cloud zone for ${fulldomain}"
+    return 1
+  fi
+
+  if ! _hetznercloud_get_rrset; then
+    return 1
+  fi
+
+  if [ "${_hetznercloud_last_http_code}" = "200" ]; then
+    if _hetznercloud_rrset_contains_value "${txtvalue}"; then
+      _info "TXT record already present; nothing to do."
+      return 0
+    fi
+  elif [ "${_hetznercloud_last_http_code}" != "404" ]; then
+    _hetznercloud_log_http_error "Failed to query existing TXT rrset" "${_hetznercloud_last_http_code}"
+    return 1
+  fi
+
+  add_payload="$(_hetznercloud_build_add_payload "${txtvalue}")"
+  if [ -z "${add_payload}" ]; then
+    _err "Failed to build request payload."
+    return 1
+  fi
+
+  if ! _hetznercloud_api POST "${_hetznercloud_rrset_action_add}" "${add_payload}"; then
+    return 1
+  fi
+
+  case "${_hetznercloud_last_http_code}" in
+  200 | 201 | 202 | 204)
+    if ! _hetznercloud_handle_action_response "TXT record add"; then
+      return 1
+    fi
+    _info "Hetzner Cloud TXT record added."
+    return 0
+    ;;
+  401 | 403)
+    _err "Hetzner Cloud DNS API authentication failed (HTTP ${_hetznercloud_last_http_code}). Check HETZNER_TOKEN for the new API."
+    _hetznercloud_log_http_error "" "${_hetznercloud_last_http_code}"
+    return 1
+    ;;
+  409 | 422)
+    _hetznercloud_log_http_error "Hetzner Cloud DNS rejected the add_records request" "${_hetznercloud_last_http_code}"
+    return 1
+    ;;
+  *)
+    _hetznercloud_log_http_error "Hetzner Cloud DNS add_records request failed" "${_hetznercloud_last_http_code}"
+    return 1
+    ;;
+  esac
+}
+
+dns_hetznercloud_rm() {
+  fulldomain="$(_idn "${1}")"
+  txtvalue="${2}"
+
+  _info "Using Hetzner Cloud DNS API to remove record"
+
+  if ! _hetznercloud_init; then
+    return 1
+  fi
+
+  if ! _hetznercloud_prepare_zone "${fulldomain}"; then
+    _err "Unable to determine Hetzner Cloud zone for ${fulldomain}"
+    return 1
+  fi
+
+  if ! _hetznercloud_get_rrset; then
+    return 1
+  fi
+
+  if [ "${_hetznercloud_last_http_code}" = "404" ]; then
+    _info "TXT rrset does not exist; nothing to remove."
+    return 0
+  fi
+
+  if [ "${_hetznercloud_last_http_code}" != "200" ]; then
+    _hetznercloud_log_http_error "Failed to query existing TXT rrset" "${_hetznercloud_last_http_code}"
+    return 1
+  fi
+
+  if _hetznercloud_rrset_contains_value "${txtvalue}"; then
+    remove_payload="$(_hetznercloud_build_remove_payload "${txtvalue}")"
+    if [ -z "${remove_payload}" ]; then
+      _err "Failed to build remove_records payload."
+      return 1
+    fi
+    if ! _hetznercloud_api POST "${_hetznercloud_rrset_action_remove}" "${remove_payload}"; then
+      return 1
+    fi
+    case "${_hetznercloud_last_http_code}" in
+    200 | 201 | 202 | 204)
+      if ! _hetznercloud_handle_action_response "TXT record remove"; then
+        return 1
+      fi
+      _info "Hetzner Cloud TXT record removed."
+      return 0
+      ;;
+    401 | 403)
+      _err "Hetzner Cloud DNS API authentication failed (HTTP ${_hetznercloud_last_http_code}). Check HETZNER_TOKEN for the new API."
+      _hetznercloud_log_http_error "" "${_hetznercloud_last_http_code}"
+      return 1
+      ;;
+    404)
+      _info "TXT rrset already absent after remove action."
+      return 0
+      ;;
+    409 | 422)
+      _hetznercloud_log_http_error "Hetzner Cloud DNS rejected the remove_records request" "${_hetznercloud_last_http_code}"
+      return 1
+      ;;
+    *)
+      _hetznercloud_log_http_error "Hetzner Cloud DNS remove_records request failed" "${_hetznercloud_last_http_code}"
+      return 1
+      ;;
+    esac
+  else
+    _info "TXT value not present; nothing to remove."
+    return 0
+  fi
+}
+
+####################  Private functions ##################################
+
+_hetznercloud_init() {
+  HETZNER_TOKEN="${HETZNER_TOKEN:-$(_readaccountconf_mutable HETZNER_TOKEN)}"
+  if [ -z "${HETZNER_TOKEN}" ]; then
+    _err "The environment variable HETZNER_TOKEN must be set for the Hetzner Cloud DNS API."
+    return 1
+  fi
+  HETZNER_TOKEN=$(echo "${HETZNER_TOKEN}" | tr -d '"')
+  _saveaccountconf_mutable HETZNER_TOKEN "${HETZNER_TOKEN}"
+
+  HETZNER_API="${HETZNER_API:-$(_readaccountconf_mutable HETZNER_API)}"
+  if [ -z "${HETZNER_API}" ]; then
+    HETZNER_API="${HETZNERCLOUD_API_DEFAULT}"
+  fi
+  _saveaccountconf_mutable HETZNER_API "${HETZNER_API}"
+
+  HETZNER_TTL="${HETZNER_TTL:-$(_readaccountconf_mutable HETZNER_TTL)}"
+  if [ -z "${HETZNER_TTL}" ]; then
+    HETZNER_TTL="${HETZNERCLOUD_TTL_DEFAULT}"
+  fi
+  ttl_check=$(printf "%s" "${HETZNER_TTL}" | tr -d '0-9')
+  if [ -n "${ttl_check}" ]; then
+    _err "HETZNER_TTL must be an integer value."
+    return 1
+  fi
+  _saveaccountconf_mutable HETZNER_TTL "${HETZNER_TTL}"
+
+  HETZNER_MAX_ATTEMPTS="${HETZNER_MAX_ATTEMPTS:-$(_readaccountconf_mutable HETZNER_MAX_ATTEMPTS)}"
+  if [ -z "${HETZNER_MAX_ATTEMPTS}" ]; then
+    HETZNER_MAX_ATTEMPTS="${HETZNER_MAX_ATTEMPTS_DEFAULT}"
+  fi
+  attempts_check=$(printf "%s" "${HETZNER_MAX_ATTEMPTS}" | tr -d '0-9')
+  if [ -n "${attempts_check}" ]; then
+    _err "HETZNER_MAX_ATTEMPTS must be an integer value."
+    return 1
+  fi
+  _saveaccountconf_mutable HETZNER_MAX_ATTEMPTS "${HETZNER_MAX_ATTEMPTS}"
+
+  return 0
+}
+
+_hetznercloud_prepare_zone() {
+  _hetznercloud_zone_id=""
+  _hetznercloud_zone_name=""
+  _hetznercloud_zone_name_lc=""
+  _hetznercloud_rr_name=""
+  _hetznercloud_rrset_path=""
+  _hetznercloud_rrset_action_add=""
+  _hetznercloud_rrset_action_remove=""
+  fulldomain_lc=$(printf "%s" "${1}" | sed 's/\.$//' | _lower_case)
+
+  i=2
+  p=1
+  while true; do
+    candidate=$(printf "%s" "${fulldomain_lc}" | cut -d . -f "${i}"-100)
+    if [ -z "${candidate}" ]; then
+      return 1
+    fi
+
+    if _hetznercloud_get_zone_by_candidate "${candidate}"; then
+      zone_name_lc="${_hetznercloud_zone_name_lc}"
+      if [ "${fulldomain_lc}" = "${zone_name_lc}" ]; then
+        _hetznercloud_rr_name="@"
+      else
+        suffix=".${zone_name_lc}"
+        if _endswith "${fulldomain_lc}" "${suffix}"; then
+          _hetznercloud_rr_name="${fulldomain_lc%"${suffix}"}"
+        else
+          _hetznercloud_rr_name="${fulldomain_lc}"
+        fi
+      fi
+      _hetznercloud_rrset_path=$(printf "%s" "${_hetznercloud_rr_name}" | _url_encode)
+      _hetznercloud_rrset_action_add="/zones/${_hetznercloud_zone_id}/rrsets/${_hetznercloud_rrset_path}/TXT/actions/add_records"
+      _hetznercloud_rrset_action_remove="/zones/${_hetznercloud_zone_id}/rrsets/${_hetznercloud_rrset_path}/TXT/actions/remove_records"
+      return 0
+    fi
+    p=${i}
+    i=$(_math "${i}" + 1)
+  done
+}
+
+_hetznercloud_get_zone_by_candidate() {
+  candidate="${1}"
+  zone_key=$(printf "%s" "${candidate}" | sed 's/[^A-Za-z0-9]/_/g')
+  zone_conf_key="HETZNERCLOUD_ZONE_ID_for_${zone_key}"
+
+  cached_zone_id=$(_readdomainconf "${zone_conf_key}")
+  if [ -n "${cached_zone_id}" ]; then
+    if _hetznercloud_api GET "/zones/${cached_zone_id}"; then
+      if [ "${_hetznercloud_last_http_code}" = "200" ]; then
+        zone_data=$(printf "%s" "${response}" | _normalizeJson | sed 's/^{"zone"://' | sed 's/}$//')
+        if _hetznercloud_parse_zone_fields "${zone_data}"; then
+          zone_name_lc=$(printf "%s" "${_hetznercloud_zone_name}" | _lower_case)
+          if [ "${zone_name_lc}" = "${candidate}" ]; then
+            return 0
+          fi
+        fi
+      elif [ "${_hetznercloud_last_http_code}" = "404" ]; then
+        _cleardomainconf "${zone_conf_key}"
+      fi
+    else
+      return 1
+    fi
+  fi
+
+  if _hetznercloud_api GET "/zones/${candidate}"; then
+    if [ "${_hetznercloud_last_http_code}" = "200" ]; then
+      zone_data=$(printf "%s" "${response}" | _normalizeJson | sed 's/^{"zone"://' | sed 's/}$//')
+      if _hetznercloud_parse_zone_fields "${zone_data}"; then
+        zone_name_lc=$(printf "%s" "${_hetznercloud_zone_name}" | _lower_case)
+        if [ "${zone_name_lc}" = "${candidate}" ]; then
+          _savedomainconf "${zone_conf_key}" "${_hetznercloud_zone_id}"
+          return 0
+        fi
+      fi
+    elif [ "${_hetznercloud_last_http_code}" != "404" ]; then
+      _hetznercloud_log_http_error "Hetzner Cloud zone lookup failed" "${_hetznercloud_last_http_code}"
+      return 1
+    fi
+  else
+    return 1
+  fi
+
+  encoded_candidate=$(printf "%s" "${candidate}" | _url_encode)
+  if ! _hetznercloud_api GET "/zones?name=${encoded_candidate}"; then
+    return 1
+  fi
+  if [ "${_hetznercloud_last_http_code}" != "200" ]; then
+    if [ "${_hetznercloud_last_http_code}" = "404" ]; then
+      return 1
+    fi
+    _hetznercloud_log_http_error "Hetzner Cloud zone search failed" "${_hetznercloud_last_http_code}"
+    return 1
+  fi
+
+  zone_data=$(_hetznercloud_extract_zone_from_list "${response}" "${candidate}")
+  if [ -z "${zone_data}" ]; then
+    return 1
+  fi
+  if ! _hetznercloud_parse_zone_fields "${zone_data}"; then
+    return 1
+  fi
+  _savedomainconf "${zone_conf_key}" "${_hetznercloud_zone_id}"
+  return 0
+}
+
+_hetznercloud_parse_zone_fields() {
+  zone_json="${1}"
+  if [ -z "${zone_json}" ]; then
+    return 1
+  fi
+  normalized=$(printf "%s" "${zone_json}" | _normalizeJson)
+  zone_id=$(printf "%s" "${normalized}" | _egrep_o '"id":[^,}]*' | _head_n 1 | cut -d : -f 2 | tr -d ' "')
+  zone_name=$(printf "%s" "${normalized}" | _egrep_o '"name":"[^"]*"' | _head_n 1 | cut -d : -f 2 | tr -d '"')
+  if [ -z "${zone_id}" ] || [ -z "${zone_name}" ]; then
+    return 1
+  fi
+  zone_name_trimmed=$(printf "%s" "${zone_name}" | sed 's/\.$//')
+  if zone_name_ascii=$(_idn "${zone_name_trimmed}"); then
+    zone_name="${zone_name_ascii}"
+  else
+    zone_name="${zone_name_trimmed}"
+  fi
+  _hetznercloud_zone_id="${zone_id}"
+  _hetznercloud_zone_name="${zone_name}"
+  _hetznercloud_zone_name_lc=$(printf "%s" "${zone_name}" | _lower_case)
+  return 0
+}
+
+_hetznercloud_extract_zone_from_list() {
+  list_response=$(printf "%s" "${1}" | _normalizeJson)
+  candidate="${2}"
+  escaped_candidate=$(_hetznercloud_escape_regex "${candidate}")
+  printf "%s" "${list_response}" | _egrep_o "{[^{}]*\"name\":\"${escaped_candidate}\"[^{}]*}" | _head_n 1
+}
+
+_hetznercloud_escape_regex() {
+  printf "%s" "${1}" | sed 's/\\/\\\\/g' | sed 's/\./\\./g' | sed 's/-/\\-/g'
+}
+
+_hetznercloud_get_rrset() {
+  if [ -z "${_hetznercloud_zone_id}" ] || [ -z "${_hetznercloud_rrset_path}" ]; then
+    return 1
+  fi
+  if ! _hetznercloud_api GET "/zones/${_hetznercloud_zone_id}/rrsets/${_hetznercloud_rrset_path}/TXT"; then
+    return 1
+  fi
+  return 0
+}
+
+_hetznercloud_rrset_contains_value() {
+  wanted_value="${1}"
+  normalized=$(printf "%s" "${response}" | _normalizeJson)
+  escaped_value=$(_hetznercloud_escape_value "${wanted_value}")
+  search_pattern="\"value\":\"\\\\\"${escaped_value}\\\\\"\""
+  if _contains "${normalized}" "${search_pattern}"; then
+    return 0
+  fi
+  return 1
+}
+
+_hetznercloud_build_add_payload() {
+  value="${1}"
+  escaped_value=$(_hetznercloud_escape_value "${value}")
+  printf '{"ttl":%s,"records":[{"value":"\\"%s\\""}]}' "${HETZNER_TTL}" "${escaped_value}"
+}
+
+_hetznercloud_build_remove_payload() {
+  value="${1}"
+  escaped_value=$(_hetznercloud_escape_value "${value}")
+  printf '{"records":[{"value":"\\"%s\\""}]}' "${escaped_value}"
+}
+
+_hetznercloud_escape_value() {
+  printf "%s" "${1}" | sed 's/\\/\\\\/g' | sed 's/"/\\"/g'
+}
+
+_hetznercloud_error_message() {
+  if [ -z "${response}" ]; then
+    return 1
+  fi
+  message=$(printf "%s" "${response}" | _normalizeJson | _egrep_o '"message":"[^"]*"' | _head_n 1 | cut -d : -f 2 | tr -d '"')
+  if [ -n "${message}" ]; then
+    printf "%s" "${message}"
+    return 0
+  fi
+  return 1
+}
+
+_hetznercloud_log_http_error() {
+  context="${1}"
+  code="${2}"
+  message="$(_hetznercloud_error_message)"
+  if [ -n "${context}" ]; then
+    if [ -n "${message}" ]; then
+      _err "${context} (HTTP ${code}): ${message}"
+    else
+      _err "${context} (HTTP ${code})"
+    fi
+  else
+    if [ -n "${message}" ]; then
+      _err "Hetzner Cloud DNS API error (HTTP ${code}): ${message}"
+    else
+      _err "Hetzner Cloud DNS API error (HTTP ${code})"
+    fi
+  fi
+}
+
+_hetznercloud_api() {
+  method="${1}"
+  ep="${2}"
+  data="${3}"
+  retried="${4}"
+
+  if [ -z "${method}" ]; then
+    method="GET"
+  fi
+
+  if ! _startswith "${ep}" "/"; then
+    ep="/${ep}"
+  fi
+  url="${HETZNER_API}${ep}"
+
+  export _H1="Authorization: Bearer ${HETZNER_TOKEN}"
+  export _H2="Accept: application/json"
+  export _H3=""
+  export _H4=""
+  export _H5=""
+
+  : >"${HTTP_HEADER}"
+
+  if [ "${method}" = "GET" ]; then
+    response="$(_get "${url}")"
+  else
+    if [ -z "${data}" ]; then
+      data="{}"
+    fi
+    response="$(_post "${data}" "${url}" "" "${method}" "application/json")"
+  fi
+  ret="${?}"
+
+  _hetznercloud_last_http_code=$(grep "^HTTP" "${HTTP_HEADER}" | _tail_n 1 | cut -d " " -f 2 | tr -d '\r\n')
+
+  if [ "${ret}" != "0" ]; then
+    return 1
+  fi
+
+  if [ "${_hetznercloud_last_http_code}" = "429" ] && [ "${retried}" != "retried" ]; then
+    retry_after=$(grep -i "^Retry-After" "${HTTP_HEADER}" | _tail_n 1 | cut -d : -f 2 | tr -d ' \r')
+    if [ -z "${retry_after}" ]; then
+      retry_after=1
+    fi
+    _info "Hetzner Cloud DNS API rate limit hit; retrying in ${retry_after} seconds."
+    _sleep "${retry_after}"
+    if ! _hetznercloud_api "${method}" "${ep}" "${data}" "retried"; then
+      return 1
+    fi
+    return 0
+  fi
+
+  return 0
+}
+
+_hetznercloud_handle_action_response() {
+  context="${1}"
+  if [ -z "${response}" ]; then
+    return 0
+  fi
+
+  normalized=$(printf "%s" "${response}" | _normalizeJson)
+
+  failed_message=""
+  if failed_message=$(_hetznercloud_extract_failed_action_message "${normalized}"); then
+    if [ -n "${failed_message}" ]; then
+      _err "Hetzner Cloud DNS ${context} failed: ${failed_message}"
+    else
+      _err "Hetzner Cloud DNS ${context} failed."
+    fi
+    return 1
+  fi
+
+  action_ids=""
+  if action_ids=$(_hetznercloud_extract_action_ids "${normalized}"); then
+    for action_id in ${action_ids}; do
+      if [ -z "${action_id}" ]; then
+        continue
+      fi
+      if ! _hetznercloud_wait_for_action "${action_id}" "${context}"; then
+        return 1
+      fi
+    done
+  fi
+
+  return 0
+}
+
+_hetznercloud_extract_failed_action_message() {
+  normalized="${1}"
+  failed_section=$(printf "%s" "${normalized}" | _egrep_o '"failed_actions":\[[^]]*\]')
+  if [ -z "${failed_section}" ]; then
+    return 1
+  fi
+  if _contains "${failed_section}" '"failed_actions":[]'; then
+    return 1
+  fi
+  message=$(printf "%s" "${failed_section}" | _egrep_o '"message":"[^"]*"' | _head_n 1 | cut -d : -f 2 | tr -d '"')
+  if [ -n "${message}" ]; then
+    printf "%s" "${message}"
+  else
+    printf "%s" "${failed_section}"
+  fi
+  return 0
+}
+
+_hetznercloud_extract_action_ids() {
+  normalized="${1}"
+  actions_section=$(printf "%s" "${normalized}" | _egrep_o '"actions":\[[^]]*\]')
+  if [ -z "${actions_section}" ]; then
+    return 1
+  fi
+  action_ids=$(printf "%s" "${actions_section}" | _egrep_o '"id":[0-9]*' | cut -d : -f 2 | tr -d '"' | tr '\n' ' ')
+  action_ids=$(printf "%s" "${action_ids}" | tr -s ' ')
+  action_ids=$(printf "%s" "${action_ids}" | sed 's/^ //;s/ $//')
+  if [ -z "${action_ids}" ]; then
+    return 1
+  fi
+  printf "%s" "${action_ids}"
+  return 0
+}
+
+_hetznercloud_wait_for_action() {
+  action_id="${1}"
+  context="${2}"
+  attempts="0"
+
+  while true; do
+    if ! _hetznercloud_api GET "/actions/${action_id}"; then
+      return 1
+    fi
+    if [ "${_hetznercloud_last_http_code}" != "200" ]; then
+      _hetznercloud_log_http_error "Hetzner Cloud DNS action ${action_id} query failed" "${_hetznercloud_last_http_code}"
+      return 1
+    fi
+
+    normalized=$(printf "%s" "${response}" | _normalizeJson)
+    action_status=$(_hetznercloud_action_status_from_normalized "${normalized}")
+
+    if [ -z "${action_status}" ]; then
+      _err "Hetzner Cloud DNS ${context} action ${action_id} returned no status."
+      return 1
+    fi
+
+    if [ "${action_status}" = "success" ]; then
+      return 0
+    fi
+
+    if [ "${action_status}" = "error" ]; then
+      if action_error=$(_hetznercloud_action_error_from_normalized "${normalized}"); then
+        _err "Hetzner Cloud DNS ${context} action ${action_id} failed: ${action_error}"
+      else
+        _err "Hetzner Cloud DNS ${context} action ${action_id} failed."
+      fi
+      return 1
+    fi
+
+    attempts=$(_math "${attempts}" + 1)
+    if [ "${attempts}" -ge "${HETZNER_MAX_ATTEMPTS}" ]; then
+      _err "Hetzner Cloud DNS ${context} action ${action_id} did not complete after ${HETZNER_MAX_ATTEMPTS} attempts."
+      return 1
+    fi
+
+    _sleep 1
+  done
+}
+
+_hetznercloud_action_status_from_normalized() {
+  normalized="${1}"
+  status=$(printf "%s" "${normalized}" | _egrep_o '"status":"[^"]*"' | _head_n 1 | cut -d : -f 2 | tr -d '"')
+  printf "%s" "${status}"
+}
+
+_hetznercloud_action_error_from_normalized() {
+  normalized="${1}"
+  error_section=$(printf "%s" "${normalized}" | _egrep_o '"error":{[^}]*}')
+  if [ -z "${error_section}" ]; then
+    return 1
+  fi
+  message=$(printf "%s" "${error_section}" | _egrep_o '"message":"[^"]*"' | _head_n 1 | cut -d : -f 2 | tr -d '"')
+  if [ -n "${message}" ]; then
+    printf "%s" "${message}"
+    return 0
+  fi
+  code=$(printf "%s" "${error_section}" | _egrep_o '"code":"[^"]*"' | _head_n 1 | cut -d : -f 2 | tr -d '"')
+  if [ -n "${code}" ]; then
+    printf "%s" "${code}"
+    return 0
+  fi
+  return 1
+}

dnsapi/dns_hostup.sh

@@ -0,0 +1,501 @@
+#!/usr/bin/env sh
+# shellcheck disable=SC2034,SC2154
+
+dns_hostup_info='HostUp DNS
+Site: hostup.se
+Docs: https://developer.hostup.se/
+Options:
+ HOSTUP_API_KEY     Required. HostUp API key with read:dns + write:dns + read:domains scopes.
+ HOSTUP_API_BASE    Optional. Override API base URL (default: https://cloud.hostup.se/api).
+ HOSTUP_TTL         Optional. TTL for TXT records (default: 60 seconds).
+ HOSTUP_ZONE_ID     Optional. Force a specific zone ID (skip auto-detection).
+Author: HostUp (https://cloud.hostup.se/contact/en)
+'
+
+HOSTUP_API_BASE_DEFAULT="https://cloud.hostup.se/api"
+HOSTUP_DEFAULT_TTL=60
+
+# Public: add TXT record
+# Usage: dns_hostup_add _acme-challenge.example.com "txt-value"
+dns_hostup_add() {
+  fulldomain="$1"
+  txtvalue="$2"
+
+  _info "Using HostUp DNS API"
+
+  if ! _hostup_init; then
+    return 1
+  fi
+
+  if ! _hostup_detect_zone "$fulldomain"; then
+    _err "Unable to determine HostUp zone for $fulldomain"
+    return 1
+  fi
+
+  record_name="$(_hostup_record_name "$fulldomain" "$HOSTUP_ZONE_DOMAIN")"
+  record_name="$(_hostup_sanitize_name "$record_name")"
+  record_value="$(_hostup_json_escape "$txtvalue")"
+
+  ttl="${HOSTUP_TTL:-$HOSTUP_DEFAULT_TTL}"
+
+  _debug "zone_id" "$HOSTUP_ZONE_ID"
+  _debug "zone_domain" "$HOSTUP_ZONE_DOMAIN"
+  _debug "record_name" "$record_name"
+  _debug "ttl" "$ttl"
+
+  request_body="{\"name\":\"$record_name\",\"type\":\"TXT\",\"value\":\"$record_value\",\"ttl\":$ttl}"
+
+  if ! _hostup_rest "POST" "/dns/zones/$HOSTUP_ZONE_ID/records" "$request_body"; then
+    return 1
+  fi
+
+  if ! _contains "$_hostup_response" '"success":true'; then
+    _err "HostUp DNS API: failed to create TXT record for $fulldomain"
+    _debug2 "_hostup_response" "$_hostup_response"
+    return 1
+  fi
+
+  record_id="$(_hostup_extract_record_id "$_hostup_response")"
+  if [ -n "$record_id" ]; then
+    _hostup_save_record_id "$HOSTUP_ZONE_ID" "$fulldomain" "$record_id"
+    _debug "hostup_saved_record_id" "$record_id"
+  fi
+
+  _info "Added TXT record for $fulldomain"
+  return 0
+}
+
+# Public: remove TXT record
+# Usage: dns_hostup_rm _acme-challenge.example.com "txt-value"
+dns_hostup_rm() {
+  fulldomain="$1"
+  txtvalue="$2"
+
+  _info "Using HostUp DNS API"
+
+  if ! _hostup_init; then
+    return 1
+  fi
+
+  if ! _hostup_detect_zone "$fulldomain"; then
+    _err "Unable to determine HostUp zone for $fulldomain"
+    return 1
+  fi
+
+  record_name_fqdn="$(_hostup_fqdn "$fulldomain")"
+  record_value="$txtvalue"
+
+  record_id_cached="$(_hostup_get_saved_record_id "$HOSTUP_ZONE_ID" "$fulldomain")"
+  if [ -n "$record_id_cached" ]; then
+    _debug "hostup_record_id_cached" "$record_id_cached"
+    if _hostup_delete_record_by_id "$HOSTUP_ZONE_ID" "$record_id_cached"; then
+      _info "Deleted TXT record $record_id_cached"
+      _hostup_clear_record_id "$HOSTUP_ZONE_ID" "$fulldomain"
+      HOSTUP_ZONE_ID=""
+      return 0
+    fi
+  fi
+
+  if ! _hostup_find_record "$HOSTUP_ZONE_ID" "$record_name_fqdn" "$record_value"; then
+    _info "TXT record not found for $record_name_fqdn. Skipping removal."
+    _hostup_clear_record_id "$HOSTUP_ZONE_ID" "$fulldomain"
+    return 0
+  fi
+
+  _debug "Deleting record" "$HOSTUP_RECORD_ID"
+
+  if ! _hostup_delete_record_by_id "$HOSTUP_ZONE_ID" "$HOSTUP_RECORD_ID"; then
+    return 1
+  fi
+
+  _info "Deleted TXT record $HOSTUP_RECORD_ID"
+  _hostup_clear_record_id "$HOSTUP_ZONE_ID" "$fulldomain"
+  HOSTUP_ZONE_ID=""
+  return 0
+}
+
+##########################
+# Private helper methods #
+##########################
+
+_hostup_init() {
+  HOSTUP_API_KEY="${HOSTUP_API_KEY:-$(_readaccountconf_mutable HOSTUP_API_KEY)}"
+  HOSTUP_API_BASE="${HOSTUP_API_BASE:-$(_readaccountconf_mutable HOSTUP_API_BASE)}"
+  HOSTUP_TTL="${HOSTUP_TTL:-$(_readaccountconf_mutable HOSTUP_TTL)}"
+  HOSTUP_ZONE_ID="${HOSTUP_ZONE_ID:-$(_readaccountconf_mutable HOSTUP_ZONE_ID)}"
+
+  if [ -z "$HOSTUP_API_BASE" ]; then
+    HOSTUP_API_BASE="$HOSTUP_API_BASE_DEFAULT"
+  fi
+
+  if [ -z "$HOSTUP_API_KEY" ]; then
+    HOSTUP_API_KEY=""
+    _err "HOSTUP_API_KEY is not set."
+    _err "Please export your HostUp API key with read:dns and write:dns scopes."
+    return 1
+  fi
+
+  _saveaccountconf_mutable HOSTUP_API_KEY "$HOSTUP_API_KEY"
+  _saveaccountconf_mutable HOSTUP_API_BASE "$HOSTUP_API_BASE"
+
+  if [ -n "$HOSTUP_TTL" ]; then
+    _saveaccountconf_mutable HOSTUP_TTL "$HOSTUP_TTL"
+  fi
+
+  if [ -n "$HOSTUP_ZONE_ID" ]; then
+    _saveaccountconf_mutable HOSTUP_ZONE_ID "$HOSTUP_ZONE_ID"
+  fi
+
+  return 0
+}
+
+_hostup_detect_zone() {
+  fulldomain="$1"
+
+  if [ -n "$HOSTUP_ZONE_ID" ] && [ -n "$HOSTUP_ZONE_DOMAIN" ]; then
+    return 0
+  fi
+
+  HOSTUP_ZONE_DOMAIN=""
+  _debug "hostup_full_domain" "$fulldomain"
+
+  if [ -n "$HOSTUP_ZONE_ID" ] && [ -z "$HOSTUP_ZONE_DOMAIN" ]; then
+    # Attempt to fetch domain name for provided zone ID
+    if _hostup_fetch_zone_details "$HOSTUP_ZONE_ID"; then
+      return 0
+    fi
+    HOSTUP_ZONE_ID=""
+  fi
+
+  if ! _hostup_load_zones; then
+    return 1
+  fi
+
+  _domain_candidate="$(printf "%s" "$fulldomain" | _lower_case)"
+  _debug "hostup_initial_candidate" "$_domain_candidate"
+
+  while [ -n "$_domain_candidate" ]; do
+    _debug "hostup_zone_candidate" "$_domain_candidate"
+    if _hostup_lookup_zone "$_domain_candidate"; then
+      HOSTUP_ZONE_DOMAIN="$_lookup_zone_domain"
+      HOSTUP_ZONE_ID="$_lookup_zone_id"
+      return 0
+    fi
+
+    case "$_domain_candidate" in
+    *.*) ;;
+    *) break ;;
+    esac
+
+    _domain_candidate="${_domain_candidate#*.}"
+  done
+
+  HOSTUP_ZONE_ID=""
+  return 1
+}
+
+_hostup_record_name() {
+  fulldomain="$1"
+  zonedomain="$2"
+
+  # Remove trailing dot, if any
+  fulldomain="${fulldomain%.}"
+  zonedomain="${zonedomain%.}"
+
+  if [ "$fulldomain" = "$zonedomain" ]; then
+    printf "%s" "@"
+    return 0
+  fi
+
+  suffix=".$zonedomain"
+  case "$fulldomain" in
+  *"$suffix")
+    printf "%s" "${fulldomain%"$suffix"}"
+    ;;
+  *)
+    # Domain not within zone, fall back to full host
+    printf "%s" "$fulldomain"
+    ;;
+  esac
+}
+
+_hostup_sanitize_name() {
+  name="$1"
+
+  if [ -z "$name" ] || [ "$name" = "." ]; then
+    printf "%s" "@"
+    return 0
+  fi
+
+  # Remove any trailing dot
+  name="${name%.}"
+  printf "%s" "$name"
+}
+
+_hostup_fqdn() {
+  domain="$1"
+  printf "%s" "${domain%.}"
+}
+
+_hostup_fetch_zone_details() {
+  zone_id="$1"
+
+  if ! _hostup_rest "GET" "/dns/zones/$zone_id/records" ""; then
+    return 1
+  fi
+
+  zonedomain="$(printf "%s" "$_hostup_response" | _egrep_o '"domain":"[^"]*"' | sed -n '1p' | cut -d ':' -f 2 | tr -d '"')"
+  if [ -n "$zonedomain" ]; then
+    HOSTUP_ZONE_DOMAIN="$zonedomain"
+    return 0
+  fi
+
+  return 1
+}
+
+_hostup_load_zones() {
+  if ! _hostup_rest "GET" "/dns/zones" ""; then
+    return 1
+  fi
+
+  HOSTUP_ZONES_CACHE=""
+  data="$(printf "%s" "$_hostup_response" | tr '{' '\n')"
+
+  while IFS= read -r line; do
+    case "$line" in
+    *'"domain_id"'*'"domain"'*)
+      zone_id="$(printf "%s" "$line" | _hostup_json_extract "domain_id")"
+      zone_domain="$(printf "%s" "$line" | _hostup_json_extract "domain")"
+      if [ -n "$zone_id" ] && [ -n "$zone_domain" ]; then
+        HOSTUP_ZONES_CACHE="${HOSTUP_ZONES_CACHE}${zone_domain}|${zone_id}
+"
+        _debug "hostup_zone_loaded" "$zone_domain|$zone_id"
+      fi
+      ;;
+    esac
+  done <<EOF
+$data
+EOF
+
+  if [ -z "$HOSTUP_ZONES_CACHE" ]; then
+    _err "HostUp DNS API: no zones returned for the current API key."
+    return 1
+  fi
+
+  return 0
+}
+
+_hostup_lookup_zone() {
+  lookup_domain="$1"
+  _lookup_zone_id=""
+  _lookup_zone_domain=""
+
+  while IFS='|' read -r domain zone_id; do
+    [ -z "$domain" ] && continue
+    if [ "$domain" = "$lookup_domain" ]; then
+      _lookup_zone_domain="$domain"
+      _lookup_zone_id="$zone_id"
+      HOSTUP_ZONE_DOMAIN="$domain"
+      HOSTUP_ZONE_ID="$zone_id"
+      return 0
+    fi
+  done <<EOF
+$HOSTUP_ZONES_CACHE
+EOF
+
+  return 1
+}
+
+_hostup_find_record() {
+  zone_id="$1"
+  fqdn="$2"
+  txtvalue="$3"
+
+  if ! _hostup_rest "GET" "/dns/zones/$zone_id/records" ""; then
+    return 1
+  fi
+
+  HOSTUP_RECORD_ID=""
+  records="$(printf "%s" "$_hostup_response" | tr '{' '\n')"
+
+  while IFS= read -r line; do
+    # Normalize line to make TXT value matching reliable
+    line_clean="$(printf "%s" "$line" | tr -d '\r\n')"
+    line_value_clean="$(printf "%s" "$line_clean" | sed 's/\\"//g')"
+
+    case "$line_clean" in
+    *'"type":"TXT"'*'"name"'*'"value"'*)
+      name_value="$(_hostup_json_extract "name" "$line_clean")"
+      record_value="$(_hostup_json_extract "value" "$line_value_clean")"
+
+      _debug "hostup_record_raw" "$record_value"
+      if [ "${record_value#\"}" != "$record_value" ] && [ "${record_value%\"}" != "$record_value" ]; then
+        record_value="${record_value#\"}"
+        record_value="${record_value%\"}"
+      fi
+      if [ "${record_value#\'}" != "$record_value" ] && [ "${record_value%\'}" != "$record_value" ]; then
+        record_value="${record_value#\'}"
+        record_value="${record_value%\'}"
+      fi
+      record_value="$(printf "%s" "$record_value" | tr -d '\r\n')"
+      _debug "hostup_record_value" "$record_value"
+
+      if [ "$name_value" = "$fqdn" ] && [ "$record_value" = "$txtvalue" ]; then
+        record_id="$(_hostup_json_extract "id" "$line_clean")"
+        if [ -n "$record_id" ]; then
+          HOSTUP_RECORD_ID="$record_id"
+          return 0
+        fi
+      fi
+      ;;
+    esac
+  done <<EOF
+$records
+EOF
+
+  return 1
+}
+
+_hostup_json_extract() {
+  key="$1"
+  input="${2:-$line}"
+
+  # First try to extract quoted values (strings)
+  quoted_match="$(printf "%s" "$input" | _egrep_o "\"$key\":\"[^\"]*\"" | _head_n 1)"
+  if [ -n "$quoted_match" ]; then
+    printf "%s" "$quoted_match" |
+      cut -d : -f2- |
+      sed 's/^"//' |
+      sed 's/"$//' |
+      sed 's/\\"/"/g'
+    return 0
+  fi
+
+  # Fallback for unquoted values (e.g., numeric IDs)
+  unquoted_match="$(printf "%s" "$input" | _egrep_o "\"$key\":[^,}]*" | _head_n 1)"
+  if [ -n "$unquoted_match" ]; then
+    printf "%s" "$unquoted_match" |
+      cut -d : -f2- |
+      tr -d '", ' |
+      tr -d '\r\n'
+    return 0
+  fi
+
+  return 1
+}
+
+_hostup_json_escape() {
+  printf "%s" "$1" | sed 's/\\/\\\\/g; s/"/\\"/g'
+}
+
+_hostup_record_key() {
+  zone_id="$1"
+  domain="$2"
+  safe_zone="$(printf "%s" "$zone_id" | sed 's/[^A-Za-z0-9]/_/g')"
+  safe_domain="$(printf "%s" "$domain" | _lower_case | sed 's/[^a-z0-9]/_/g')"
+  printf "%s_%s" "$safe_zone" "$safe_domain"
+}
+
+_hostup_save_record_id() {
+  zone_id="$1"
+  domain="$2"
+  record_id="$3"
+  key="$(_hostup_record_key "$zone_id" "$domain")"
+  _saveaccountconf_mutable "HOSTUP_RECORD_$key" "$record_id"
+}
+
+_hostup_get_saved_record_id() {
+  zone_id="$1"
+  domain="$2"
+  key="$(_hostup_record_key "$zone_id" "$domain")"
+  _readaccountconf_mutable "HOSTUP_RECORD_$key"
+}
+
+_hostup_clear_record_id() {
+  zone_id="$1"
+  domain="$2"
+  key="$(_hostup_record_key "$zone_id" "$domain")"
+  _clearaccountconf_mutable "HOSTUP_RECORD_$key"
+}
+
+_hostup_extract_record_id() {
+  record_id="$(_hostup_json_extract "id" "$1")"
+  if [ -n "$record_id" ]; then
+    printf "%s" "$record_id"
+    return 0
+  fi
+
+  printf "%s" "$1" | _egrep_o '"id":[0-9]+' | _head_n 1 | cut -d: -f2
+}
+
+_hostup_delete_record_by_id() {
+  zone_id="$1"
+  record_id="$2"
+
+  if ! _hostup_rest "DELETE" "/dns/zones/$zone_id/records/$record_id" ""; then
+    return 1
+  fi
+
+  if ! _contains "$_hostup_response" '"success":true'; then
+    return 1
+  fi
+
+  return 0
+}
+
+_hostup_rest() {
+  method="$1"
+  route="$2"
+  data="$3"
+
+  _hostup_response=""
+
+  export _H1="Authorization: Bearer $HOSTUP_API_KEY"
+  export _H2="Content-Type: application/json"
+  export _H3="Accept: application/json"
+
+  if [ "$method" = "GET" ]; then
+    _hostup_response="$(_get "$HOSTUP_API_BASE$route")"
+  else
+    _hostup_response="$(_post "$data" "$HOSTUP_API_BASE$route" "" "$method" "application/json")"
+  fi
+
+  ret="$?"
+
+  unset _H1
+  unset _H2
+  unset _H3
+
+  if [ "$ret" != "0" ]; then
+    _err "HTTP request failed for $route"
+    return 1
+  fi
+
+  http_status="$(grep "^HTTP" "$HTTP_HEADER" | _tail_n 1 | cut -d " " -f 2 | tr -d "\r\n")"
+  _debug2 "HTTP status" "$http_status"
+  _debug2 "_hostup_response" "$_hostup_response"
+
+  case "$http_status" in
+  200 | 201 | 204) return 0 ;;
+  401)
+    _err "HostUp API returned 401 Unauthorized. Check HOSTUP_API_KEY scopes and IP restrictions."
+    return 1
+    ;;
+  403)
+    _err "HostUp API returned 403 Forbidden. The API key lacks required DNS scopes."
+    return 1
+    ;;
+  404)
+    _err "HostUp API returned 404 Not Found for $route"
+    return 1
+    ;;
+  429)
+    _err "HostUp API rate limit exceeded. Please retry later."
+    return 1
+    ;;
+  *)
+    _err "HostUp API request failed with status $http_status"
+    return 1
+    ;;
+  esac
+}

dnsapi/dns_infoblox_uddi.sh

@@ -0,0 +1,244 @@
+#!/usr/bin/env sh
+# shellcheck disable=SC2034
+dns_infoblox_uddi_info='Infoblox UDDI
+Site: Infoblox.com
+Docs: github.com/acmesh-official/acme.sh/wiki/dnsapi2#dns_infoblox_uddi
+Options:
+ Infoblox_UDDI_Key API Key for Infoblox UDDI
+ Infoblox_Portal URL, e.g. "csp.infoblox.com" or "csp.eu.infoblox.com"
+Issues: github.com/acmesh-official/acme.sh/issues
+Author: Stefan Riegel
+'
+
+Infoblox_UDDI_Api="https://"
+
+########  Public functions #####################
+
+#Usage: dns_infoblox_uddi_add _acme-challenge.www.domain.com "XKrxpRBosdIKFzxW_CT3KLZNf6q0HG9i01zxXp5CPBs"
+dns_infoblox_uddi_add() {
+  fulldomain=$1
+  txtvalue=$2
+
+  Infoblox_UDDI_Key="${Infoblox_UDDI_Key:-$(_readaccountconf_mutable Infoblox_UDDI_Key)}"
+  Infoblox_Portal="${Infoblox_Portal:-$(_readaccountconf_mutable Infoblox_Portal)}"
+
+  _info "Using Infoblox UDDI API"
+  _debug fulldomain "$fulldomain"
+  _debug txtvalue "$txtvalue"
+
+  if [ -z "$Infoblox_UDDI_Key" ] || [ -z "$Infoblox_Portal" ]; then
+    Infoblox_UDDI_Key=""
+    Infoblox_Portal=""
+    _err "You didn't specify the Infoblox UDDI key or server (Infoblox_UDDI_Key; Infoblox_Portal)."
+    _err "Please set them via EXPORT Infoblox_UDDI_Key=your_key, EXPORT Infoblox_Portal=csp.infoblox.com and try again."
+    return 1
+  fi
+
+  _saveaccountconf_mutable Infoblox_UDDI_Key "$Infoblox_UDDI_Key"
+  _saveaccountconf_mutable Infoblox_Portal "$Infoblox_Portal"
+
+  export _H1="Authorization: Token $Infoblox_UDDI_Key"
+  export _H2="Content-Type: application/json"
+
+  _debug "First detect the root zone"
+  if ! _get_root "$fulldomain"; then
+    _err "invalid domain"
+    return 1
+  fi
+  _debug _domain_id "$_domain_id"
+  _debug _sub_domain "$_sub_domain"
+  _debug _domain "$_domain"
+
+  _debug "Getting existing txt records"
+  _infoblox_rest GET "dns/record?_filter=type%20eq%20'TXT'%20and%20name_in_zone%20eq%20'$_sub_domain'%20and%20zone%20eq%20'$_domain_id'"
+
+  _info "Adding record"
+  body="{\"type\":\"TXT\",\"name_in_zone\":\"$_sub_domain\",\"zone\":\"$_domain_id\",\"ttl\":120,\"inheritance_sources\":{\"ttl\":{\"action\":\"override\"}},\"rdata\":{\"text\":\"$txtvalue\"}}"
+
+  if _infoblox_rest POST "dns/record" "$body"; then
+    if _contains "$response" "$txtvalue"; then
+      _info "Added, OK"
+      return 0
+    elif _contains "$response" '"error"'; then
+      # Check if record already exists
+      if _contains "$response" "already exists" || _contains "$response" "duplicate"; then
+        _info "Already exists, OK"
+        return 0
+      else
+        _err "Add txt record error."
+        _err "Response: $response"
+        return 1
+      fi
+    else
+      _info "Added, OK"
+      return 0
+    fi
+  fi
+  _err "Add txt record error."
+  return 1
+}
+
+#Usage: dns_infoblox_uddi_rm _acme-challenge.www.domain.com "XKrxpRBosdIKFzxW_CT3KLZNf6q0HG9i01zxXp5CPBs"
+dns_infoblox_uddi_rm() {
+  fulldomain=$1
+  txtvalue=$2
+
+  Infoblox_UDDI_Key="${Infoblox_UDDI_Key:-$(_readaccountconf_mutable Infoblox_UDDI_Key)}"
+  Infoblox_Portal="${Infoblox_Portal:-$(_readaccountconf_mutable Infoblox_Portal)}"
+
+  if [ -z "$Infoblox_UDDI_Key" ] || [ -z "$Infoblox_Portal" ]; then
+    _err "Credentials not found"
+    return 1
+  fi
+
+  _info "Using Infoblox UDDI API"
+  _debug fulldomain "$fulldomain"
+  _debug txtvalue "$txtvalue"
+
+  export _H1="Authorization: Token $Infoblox_UDDI_Key"
+  export _H2="Content-Type: application/json"
+
+  _debug "First detect the root zone"
+  if ! _get_root "$fulldomain"; then
+    _err "invalid domain"
+    return 1
+  fi
+  _debug _domain_id "$_domain_id"
+  _debug _sub_domain "$_sub_domain"
+  _debug _domain "$_domain"
+
+  _debug "Getting txt records to delete"
+  # Filter by txtvalue to support wildcard certs (multiple TXT records)
+  filter="type%20eq%20'TXT'%20and%20name_in_zone%20eq%20'$_sub_domain'%20and%20zone%20eq%20'$_domain_id'%20and%20rdata.text%20eq%20'$txtvalue'"
+  _infoblox_rest GET "dns/record?_filter=$filter"
+
+  if ! _contains "$response" '"results"'; then
+    _info "Don't need to remove, record not found."
+    return 0
+  fi
+
+  record_id=$(echo "$response" | _egrep_o '"id":[[:space:]]*"[^"]*"' | _head_n 1 | cut -d '"' -f 4)
+  _debug "record_id" "$record_id"
+
+  if [ -z "$record_id" ]; then
+    _info "Don't need to remove, record not found."
+    return 0
+  fi
+
+  # Extract UUID from the full record ID (format: dns/record/uuid)
+  record_uuid=$(echo "$record_id" | sed 's|.*/||')
+  _debug "record_uuid" "$record_uuid"
+
+  if ! _infoblox_rest DELETE "dns/record/$record_uuid"; then
+    _err "Delete record error."
+    return 1
+  fi
+
+  _info "Removed record successfully"
+  return 0
+}
+
+####################  Private functions below ##################################
+
+#_acme-challenge.www.domain.com
+#returns
+# _sub_domain=_acme-challenge.www
+# _domain=domain.com
+# _domain_id=dns/auth_zone/xxxx-xxxx
+_get_root() {
+  domain=$1
+  i=1
+  p=1
+
+  # Remove _acme-challenge prefix if present
+  domain_no_acme=$(echo "$domain" | sed 's/^_acme-challenge\.//')
+
+  while true; do
+    h=$(printf "%s" "$domain_no_acme" | cut -d . -f "$i"-100)
+    _debug h "$h"
+    if [ -z "$h" ]; then
+      # not valid
+      return 1
+    fi
+
+    # Query for the zone with both trailing dot and without
+    filter="fqdn%20eq%20'$h.'%20or%20fqdn%20eq%20'$h'"
+    if ! _infoblox_rest GET "dns/auth_zone?_filter=$filter"; then
+      # API error - don't continue if we get auth errors
+      if _contains "$response" "401" || _contains "$response" "Authorization"; then
+        _err "Authentication failed. Please check your Infoblox_UDDI_Key."
+        return 1
+      fi
+      # For other errors, continue to parent domain
+      p=$i
+      i=$((i + 1))
+      continue
+    fi
+
+    # Check if response contains results (even if empty)
+    if _contains "$response" '"results"'; then
+      # Extract zone ID - must match the pattern dns/auth_zone/...
+      zone_id=$(echo "$response" | _egrep_o '"id":[[:space:]]*"dns/auth_zone/[^"]*"' | _head_n 1 | cut -d '"' -f 4)
+      if [ -n "$zone_id" ]; then
+        # Found the zone
+        _domain="$h"
+        _domain_id="$zone_id"
+
+        # Calculate subdomain
+        if [ "$_domain" = "$domain" ]; then
+          _sub_domain=""
+        else
+          _cutlength=$((${#domain} - ${#_domain} - 1))
+          _sub_domain=$(printf "%s" "$domain" | cut -c "1-$_cutlength")
+        fi
+
+        return 0
+      fi
+    fi
+
+    p=$i
+    i=$((i + 1))
+  done
+
+  return 1
+}
+
+# _infoblox_rest GET "dns/record?_filter=..."
+# _infoblox_rest POST "dns/record" "{json body}"
+# _infoblox_rest DELETE "dns/record/uuid"
+_infoblox_rest() {
+  method=$1
+  ep="$2"
+  data="$3"
+
+  _debug "$ep"
+
+  # Ensure credentials are available (when called from _get_root)
+  Infoblox_UDDI_Key="${Infoblox_UDDI_Key:-$(_readaccountconf_mutable Infoblox_UDDI_Key)}"
+  Infoblox_Portal="${Infoblox_Portal:-$(_readaccountconf_mutable Infoblox_Portal)}"
+
+  Infoblox_UDDI_Api="https://$Infoblox_Portal/api/ddi/v1"
+  export _H1="Authorization: Token $Infoblox_UDDI_Key"
+  export _H2="Content-Type: application/json"
+
+  # Debug (masked)
+  _tok_len=$(printf "%s" "$Infoblox_UDDI_Key" | wc -c | tr -d ' \n')
+  _debug2 "Auth header set" "Token len=${_tok_len} on $Infoblox_Portal"
+
+  if [ "$method" != "GET" ]; then
+    _debug data "$data"
+    response="$(_post "$data" "$Infoblox_UDDI_Api/$ep" "" "$method")"
+  else
+    response="$(_get "$Infoblox_UDDI_Api/$ep")"
+  fi
+
+  _ret="$?"
+  _debug2 response "$response"
+
+  if [ "$_ret" != "0" ]; then
+    _err "Error: $ep"
+    return 1
+  fi
+
+  return 0
+}

dnsapi/dns_infomaniak.sh

@@ -6,14 +6,16 @@ Docs: github.com/acmesh-official/acme.sh/wiki/dnsapi2#dns_infomaniak
 Options:
  INFOMANIAK_API_TOKEN API Token
 Issues: github.com/acmesh-official/acme.sh/issues/3188
+
 '
 
-# To use this API you need visit the API dashboard of your account
-# once logged into https://manager.infomaniak.com add /api/dashboard to the URL
-#
+# To use this API you need visit the API dashboard of your account.
 # Note: the URL looks like this:
-# https://manager.infomaniak.com/v3/<account_id>/api/dashboard
-# Then generate a token with the scope Domain
+# https://manager.infomaniak.com/v3/<account_id>/ng/profile/user/token/list
+# Then generate a token with following scopes :
+#  - domain:read
+#  - dns:read
+#  - dns:write
 # this is given as an environment variable INFOMANIAK_API_TOKEN
 
 # base variables
@@ -65,33 +67,32 @@ dns_infomaniak_add() {
   _debug fulldomain "$fulldomain"
   _debug txtvalue "$txtvalue"
 
-  fqdn=${fulldomain#_acme-challenge.}
-
   # guess which base domain to add record to
-  zone_and_id=$(_find_zone "$fqdn")
-  if [ -z "$zone_and_id" ]; then
-    _err "cannot find zone to modify"
+  zone=$(_get_zone "$fulldomain")
+  if [ -z "$zone" ]; then
+    _err "cannot find zone:<${zone}> to modify"
     return 1
   fi
-  zone=${zone_and_id% *}
-  domain_id=${zone_and_id#* }
 
   # extract first part of domain
   key=${fulldomain%."$zone"}
 
-  _debug "zone:$zone id:$domain_id key:$key"
+  _debug "key:$key"
+  _debug "txtvalue: $txtvalue"
 
   # payload
   data="{\"type\": \"TXT\", \"source\": \"$key\", \"target\": \"$txtvalue\", \"ttl\": $INFOMANIAK_TTL}"
 
   # API call
-  response=$(_post "$data" "${INFOMANIAK_API_URL}/1/domain/$domain_id/dns/record")
-  if [ -n "$response" ] && echo "$response" | _contains '"result":"success"'; then
-    _info "Record added"
-    _debug "Response: $response"
-    return 0
+  response=$(_post "$data" "${INFOMANIAK_API_URL}/2/zones/${zone}/records")
+  if [ -n "$response" ]; then
+    if [ ! "$(echo "$response" | _contains '"result":"success"')" ]; then
+      _info "Record added"
+      _debug "response: $response"
+      return 0
+    fi
   fi
-  _err "could not create record"
+  _err "Could not create record."
   _debug "Response: $response"
   return 1
 }
@@ -106,7 +107,7 @@ dns_infomaniak_rm() {
 
   if [ -z "$INFOMANIAK_API_TOKEN" ]; then
     INFOMANIAK_API_TOKEN=""
-    _err "Please provide a valid Infomaniak API token in variable INFOMANIAK_API_TOKEN"
+    _err "Please provide a valid Infomaniak API token in variable INFOMANIAK_API_TOKEN."
     return 1
   fi
 
@@ -138,63 +139,53 @@ dns_infomaniak_rm() {
   _debug fulldomain "$fulldomain"
   _debug txtvalue "$txtvalue"
 
-  fqdn=${fulldomain#_acme-challenge.}
-
   # guess which base domain to add record to
-  zone_and_id=$(_find_zone "$fqdn")
-  if [ -z "$zone_and_id" ]; then
-    _err "cannot find zone to modify"
+  zone=$(_get_zone "$fulldomain")
+  if [ -z "$zone" ]; then
+    _err "cannot find zone:<$zone> to modify"
     return 1
   fi
-  zone=${zone_and_id% *}
-  domain_id=${zone_and_id#* }
 
   # extract first part of domain
   key=${fulldomain%."$zone"}
+  key=$(echo "$key" | _lower_case)
 
-  _debug "zone:$zone id:$domain_id key:$key"
+  _debug "zone:$zone"
+  _debug "key:$key"
 
   # find previous record
-  # shellcheck disable=SC1004
-  record_id=$(_get "${INFOMANIAK_API_URL}/1/domain/$domain_id/dns/record" | sed 's/.*"data":\[\(.*\)\]}/\1/; s/},{/}\
-{/g' | sed -n 's/.*"id":"*\([0-9]*\)"*.*"source_idn":"'"$fulldomain"'".*"target_idn":"'"$txtvalue"'".*/\1/p')
-  if [ -z "$record_id" ]; then
-    _err "could not find record to delete"
-    return 1
-  fi
+  # shellcheck disable=SC2086
+  response=$(_get "${INFOMANIAK_API_URL}/2/zones/${zone}/records" | sed 's/.*"data":\[\(.*\)\]}/\1/; s/},{/}{/g')
+  record_id=$(echo "$response" | sed -n 's/.*"id":"*\([0-9]*\)"*.*"source":"'"$key"'".*"target":"\\"'"$txtvalue"'\\"".*/\1/p')
+  _debug "key: $key"
+  _debug "txtvalue: $txtvalue"
   _debug "record_id: $record_id"
 
-  # API call
-  response=$(_post "" "${INFOMANIAK_API_URL}/1/domain/$domain_id/dns/record/$record_id" "" DELETE)
-  if [ -n "$response" ] && echo "$response" | _contains '"result":"success"'; then
-    _info "Record deleted"
-    return 0
+  if [ -z "$record_id" ]; then
+    _err "could not find record to delete"
+    _debug "response: $response"
+    return 1
   fi
-  _err "could not delete record"
+
+  # API call
+  response=$(_post "" "${INFOMANIAK_API_URL}/2/zones/${zone}/records/${record_id}" "" DELETE)
+  if [ -n "$response" ]; then
+    if [ ! "$(echo "$response" | _contains '"result":"success"')" ]; then
+      _info "Record deleted"
+      return 0
+    fi
+  fi
+  _err "Could not delete record."
+  _debug "Response: $response"
   return 1
 }
 
 ####################  Private functions below ##################################
 
-_get_domain_id() {
+_get_zone() {
   domain="$1"
-
+  # Whatever the domain is, you can get the fqdn with the following.
   # shellcheck disable=SC1004
-  _get "${INFOMANIAK_API_URL}/1/product?service_name=domain&customer_name=$domain" | sed 's/.*"data":\[{\(.*\)}\]}/\1/; s/,/\
-/g' | sed -n 's/^"id":\(.*\)/\1/p'
-}
-
-_find_zone() {
-  zone="$1"
-
-  # find domain in list, removing . parts sequentialy
-  while _contains "$zone" '\.'; do
-    _debug "testing $zone"
-    id=$(_get_domain_id "$zone")
-    if [ -n "$id" ]; then
-      echo "$zone $id"
-      return
-    fi
-    zone=${zone#*.}
-  done
+  response=$(_get "${INFOMANIAK_API_URL}/2/domains/${domain}/zones" | sed 's/.*\[{"fqdn"\:"\(.*\)/\1/')
+  echo "${response%%\"*}"
 }

dnsapi/dns_inwx.sh

@@ -6,6 +6,7 @@ Docs: github.com/acmesh-official/acme.sh/wiki/dnsapi#dns_inwx
 Options:
  INWX_User Username
  INWX_Password Password
+ INWX_Shared_Secret 2 Factor Authentication Shared Secret (optional requires oathtool)
 '
 
 # Dependencies:
@@ -110,11 +111,17 @@ dns_inwx_rm() {
         <string>%s</string>
        </value>
       </member>
+      <member>
+       <name>content</name>
+       <value>
+        <string>%s</string>
+       </value>
+      </member>
      </struct>
     </value>
    </param>
   </params>
-  </methodCall>' "$_domain" "$_sub_domain")
+  </methodCall>' "$_domain" "$_sub_domain" "$txtvalue")
   response="$(_post "$xml_content" "$INWX_Api" "" "POST")"
 
   if ! _contains "$response" "Command completed successfully"; then
@@ -125,7 +132,7 @@ dns_inwx_rm() {
   if ! printf "%s" "$response" | grep "count" >/dev/null; then
     _info "Do not need to delete record"
   else
-    _record_id=$(printf '%s' "$response" | _egrep_o '.*(<member><name>record){1}(.*)([0-9]+){1}' | _egrep_o '<name>id<\/name><value><int>[0-9]+' | _egrep_o '[0-9]+')
+    _record_id=$(printf '%s' "$response" | _egrep_o '.*(<member><name>record){1}(.*)([0-9]+){1}' | _egrep_o '<name>id<\/name><value><string>[0-9]+' | _egrep_o '[0-9]+')
     _info "Deleting record"
     _inwx_delete_record "$_record_id"
   fi
@@ -324,7 +331,7 @@ _inwx_delete_record() {
       <member>
        <name>id</name>
        <value>
-        <int>%s</int>
+        <string>%s</string>
        </value>
       </member>
      </struct>
@@ -362,7 +369,7 @@ _inwx_update_record() {
       <member>
        <name>id</name>
        <value>
-        <int>%s</int>
+        <string>%s</string>
        </value>
       </member>
      </struct>

dnsapi/dns_joker.sh

@@ -7,7 +7,7 @@ Options:
  JOKER_USERNAME Username
  JOKER_PASSWORD Password
 Issues: github.com/acmesh-official/acme.sh/issues/2840
-Author: <https://github.com/aattww/>
+Author: @aattww
 '
 
 JOKER_API="https://svc.joker.com/nic/replace"

dnsapi/dns_la.sh

@@ -1,14 +1,17 @@
 #!/usr/bin/env sh
+
+# LA_Id="123"
+# LA_Sk="456"
 # shellcheck disable=SC2034
 dns_la_info='dns.la
 Site: dns.la
 Docs: github.com/acmesh-official/acme.sh/wiki/dnsapi2#dns_la
 Options:
- LA_Id API ID
- LA_Key API key
+ LA_Id APIID
+ LA_Sk APISecret
+ LA_Token 用冒号连接 APIID APISecret 再base64生成
 Issues: github.com/acmesh-official/acme.sh/issues/4257
 '
-
 LA_Api="https://api.dns.la/api"
 
 ########  Public functions #####################
@@ -19,18 +22,23 @@ dns_la_add() {
   txtvalue=$2
 
   LA_Id="${LA_Id:-$(_readaccountconf_mutable LA_Id)}"
-  LA_Key="${LA_Key:-$(_readaccountconf_mutable LA_Key)}"
+  LA_Sk="${LA_Sk:-$(_readaccountconf_mutable LA_Sk)}"
+  _log "LA_Id=$LA_Id"
+  _log "LA_Sk=$LA_Sk"
 
-  if [ -z "$LA_Id" ] || [ -z "$LA_Key" ]; then
+  if [ -z "$LA_Id" ] || [ -z "$LA_Sk" ]; then
     LA_Id=""
-    LA_Key=""
+    LA_Sk=""
     _err "You didn't specify a dnsla api id and key yet."
     return 1
   fi
 
   #save the api key and email to the account conf file.
   _saveaccountconf_mutable LA_Id "$LA_Id"
-  _saveaccountconf_mutable LA_Key "$LA_Key"
+  _saveaccountconf_mutable LA_Sk "$LA_Sk"
+
+  # generate dnsla token
+  _la_token
 
   _debug "First detect the root zone"
   if ! _get_root "$fulldomain"; then
@@ -42,11 +50,13 @@ dns_la_add() {
   _debug _domain "$_domain"
 
   _info "Adding record"
-  if _la_rest "record.ashx?cmd=create&apiid=$LA_Id&apipass=$LA_Key&rtype=json&domainid=$_domain_id&host=$_sub_domain&recordtype=TXT&recorddata=$txtvalue&recordline="; then
-    if _contains "$response" '"resultid":'; then
+
+  # record type is enum in new api, 16 for TXT
+  if _la_post "{\"domainId\":\"$_domain_id\",\"type\":16,\"host\":\"$_sub_domain\",\"data\":\"$txtvalue\",\"ttl\":600}" "record"; then
+    if _contains "$response" '"id":'; then
       _info "Added, OK"
       return 0
-    elif _contains "$response" '"code":532'; then
+    elif _contains "$response" '"msg":"与已有记录冲突"'; then
       _info "Already exists, OK"
       return 0
     else
@@ -54,7 +64,7 @@ dns_la_add() {
       return 1
     fi
   fi
-  _err "Add txt record error."
+  _err "Add txt record failed."
   return 1
 
 }
@@ -65,7 +75,9 @@ dns_la_rm() {
   txtvalue=$2
 
   LA_Id="${LA_Id:-$(_readaccountconf_mutable LA_Id)}"
-  LA_Key="${LA_Key:-$(_readaccountconf_mutable LA_Key)}"
+  LA_Sk="${LA_Sk:-$(_readaccountconf_mutable LA_Sk)}"
+
+  _la_token
 
   _debug "First detect the root zone"
   if ! _get_root "$fulldomain"; then
@@ -77,27 +89,29 @@ dns_la_rm() {
   _debug _domain "$_domain"
 
   _debug "Getting txt records"
-  if ! _la_rest "record.ashx?cmd=listn&apiid=$LA_Id&apipass=$LA_Key&rtype=json&domainid=$_domain_id&domain=$_domain&host=$_sub_domain&recordtype=TXT&recorddata=$txtvalue"; then
+  # record type is enum in new api, 16 for TXT
+  if ! _la_get "recordList?pageIndex=1&pageSize=10&domainId=$_domain_id&host=$_sub_domain&type=16&data=$txtvalue"; then
     _err "Error"
     return 1
   fi
 
-  if ! _contains "$response" '"recordid":'; then
+  if ! _contains "$response" '"id":'; then
     _info "Don't need to remove."
     return 0
   fi
 
-  record_id=$(printf "%s" "$response" | grep '"recordid":' | cut -d : -f 2 | cut -d , -f 1 | tr -d '\r' | tr -d '\n')
+  record_id=$(printf "%s" "$response" | grep '"id":' | _head_n 1 | sed 's/.*"id": *"\([^"]*\)".*/\1/')
   _debug "record_id" "$record_id"
   if [ -z "$record_id" ]; then
     _err "Can not get record id to remove."
     return 1
   fi
-  if ! _la_rest "record.ashx?cmd=remove&apiid=$LA_Id&apipass=$LA_Key&rtype=json&domainid=$_domain_id&domain=$_domain&recordid=$record_id"; then
+  # remove record in new api is RESTful
+  if ! _la_post "" "record?id=$record_id" "DELETE"; then
     _err "Delete record error."
     return 1
   fi
-  _contains "$response" '"code":300'
+  _contains "$response" '"code":200'
 
 }
 
@@ -119,12 +133,13 @@ _get_root() {
       return 1
     fi
 
-    if ! _la_rest "domain.ashx?cmd=get&apiid=$LA_Id&apipass=$LA_Key&rtype=json&domain=$h"; then
+    if ! _la_get "domain?domain=$h"; then
       return 1
     fi
 
-    if _contains "$response" '"domainid":'; then
-      _domain_id=$(printf "%s" "$response" | grep '"domainid":' | cut -d : -f 2 | cut -d , -f 1 | tr -d '\r' | tr -d '\n')
+    if _contains "$response" '"domain":'; then
+      _domain_id=$(echo "$response" | sed -n 's/.*"id":"\([^"]*\)".*/\1/p')
+      _log "_domain_id" "$_domain_id"
       if [ "$_domain_id" ]; then
         _sub_domain=$(printf "%s" "$domain" | cut -d . -f 1-"$p")
         _domain="$h"
@@ -143,6 +158,21 @@ _la_rest() {
   url="$LA_Api/$1"
   _debug "$url"
 
+  if ! response="$(_get "$url" "Authorization: Basic $LA_Token" | tr -d ' ' | tr "}" ",")"; then
+    _err "Error: $url"
+    return 1
+  fi
+
+  _debug2 response "$response"
+  return 0
+}
+
+_la_get() {
+  url="$LA_Api/$1"
+  _debug "$url"
+
+  export _H1="Authorization: Basic $LA_Token"
+
   if ! response="$(_get "$url" | tr -d ' ' | tr "}" ",")"; then
     _err "Error: $url"
     return 1
@@ -151,3 +181,29 @@ _la_rest() {
   _debug2 response "$response"
   return 0
 }
+
+# Usage:  _la_post body url [POST|PUT|DELETE]
+_la_post() {
+  body=$1
+  url="$LA_Api/$2"
+  http_method=$3
+  _debug "$body"
+  _debug "$url"
+
+  export _H1="Authorization: Basic $LA_Token"
+
+  if ! response="$(_post "$body" "$url" "" "$http_method")"; then
+    _err "Error: $url"
+    return 1
+  fi
+
+  _debug2 response "$response"
+  return 0
+}
+
+_la_token() {
+  LA_Token=$(printf "%s:%s" "$LA_Id" "$LA_Sk" | _base64)
+  _debug "$LA_Token"
+
+  return 0
+}

dnsapi/dns_me.sh

@@ -53,6 +53,8 @@ dns_me_add() {
       _info "Added"
       #todo: check if the record takes effect
       return 0
+    elif printf -- "%s" "$response" | grep -q "already exists"; then
+      _info "Record already exists, skipping."
     else
       _err "Add txt record error."
       return 1

dnsapi/dns_mgwm.sh

@@ -0,0 +1,109 @@
+#!/usr/bin/env sh
+# shellcheck disable=SC2034
+dns_mgwm_info='mgw-media.de
+Site: mgw-media.de
+Docs: github.com/acmesh-official/acme.sh/wiki/dnsapi2#dns_mgwm
+Options:
+ MGWM_CUSTOMER Your customer number
+ MGWM_API_HASH Your API Hash
+Issues: github.com/acmesh-official/acme.sh/issues/6669
+'
+# Base URL for the mgw-media.de API
+MGWM_API_BASE="https://api.mgw-media.de/record"
+
+########  Public functions #####################
+
+# This function is called by acme.sh to add a TXT record.
+dns_mgwm_add() {
+  fulldomain=$1
+  txtvalue=$2
+  _info "Using mgw-media.de DNS API for domain $fulldomain (add record)"
+  _debug "fulldomain: $fulldomain"
+  _debug "txtvalue: $txtvalue"
+
+  # Call the new private function to handle the API request.
+  # The 'add' action, fulldomain, type 'txt' and txtvalue are passed.
+  if _mgwm_request "add" "$fulldomain" "txt" "$txtvalue"; then
+    _info "TXT record for $fulldomain successfully added via mgw-media.de API."
+    _sleep 10 # Wait briefly for DNS propagation, a common practice in DNS-01 hooks.
+    return 0
+  else
+    # Error message already logged by _mgwm_request, but a specific one here helps.
+    _err "mgwm_add: Failed to add TXT record for $fulldomain."
+    return 1
+  fi
+}
+# This function is called by acme.sh to remove a TXT record after validation.
+dns_mgwm_rm() {
+  fulldomain=$1
+  txtvalue=$2 # This txtvalue is now used to identify the specific record to be removed.
+  _info "Removing TXT record for $fulldomain using mgw-media.de DNS API (remove record)"
+  _debug "fulldomain: $fulldomain"
+  _debug "txtvalue: $txtvalue"
+
+  # Call the new private function to handle the API request.
+  # The 'rm' action, fulldomain, type 'txt' and txtvalue are passed.
+  if _mgwm_request "rm" "$fulldomain" "txt" "$txtvalue"; then
+    _info "TXT record for $fulldomain successfully removed via mgw-media.de API."
+    return 0
+  else
+    # Error message already logged by _mgwm_request, but a specific one here helps.
+    _err "mgwm_rm: Failed to remove TXT record for $fulldomain."
+    return 1
+  fi
+}
+####################  Private functions below ##################################
+
+# _mgwm_request() encapsulates the API call logic, including
+# loading credentials, setting the Authorization header, and executing the request.
+# Arguments:
+#   $1: action (e.g., "add", "rm")
+#   $2: fulldomain
+#   $3: type (e.g., "txt")
+#   $4: content (the txtvalue)
+_mgwm_request() {
+  _action="$1"
+  _fulldomain="$2"
+  _type="$3"
+  _content="$4"
+
+  _debug "Calling _mgwm_request for action: $_action, domain: $_fulldomain, type: $_type, content: $_content"
+
+  # Load credentials from environment or acme.sh config
+  MGWM_CUSTOMER="${MGWM_CUSTOMER:-$(_readaccountconf_mutable MGWM_CUSTOMER)}"
+  MGWM_API_HASH="${MGWM_API_HASH:-$(_readaccountconf_mutable MGWM_API_HASH)}"
+
+  # Check if credentials are set
+  if [ -z "$MGWM_CUSTOMER" ] || [ -z "$MGWM_API_HASH" ]; then
+    _err "You didn't specify one or more of MGWM_CUSTOMER or MGWM_API_HASH."
+    _err "Please check these environment variables and try again."
+    return 1
+  fi
+
+  # Save credentials for automatic renewal and future calls
+  _saveaccountconf_mutable MGWM_CUSTOMER "$MGWM_CUSTOMER"
+  _saveaccountconf_mutable MGWM_API_HASH "$MGWM_API_HASH"
+
+  # Create the Basic Auth Header. acme.sh's _base64 function is used for encoding.
+  _credentials="$(printf "%s:%s" "$MGWM_CUSTOMER" "$MGWM_API_HASH" | _base64)"
+  export _H1="Authorization: Basic $_credentials"
+  _debug "Set Authorization Header: Basic <credentials_encoded>" # Log debug message without sensitive credentials
+
+  # Construct the API URL based on the action and provided parameters.
+  _request_url="${MGWM_API_BASE}/${_action}/${_fulldomain}/${_type}/${_content}"
+  _debug "Constructed mgw-media.de API URL for action '$_action': ${_request_url}"
+
+  # Execute the HTTP GET request with the Authorization Header.
+  # The 5th parameter of _get is where acme.sh expects custom HTTP headers like Authorization.
+  response="$(_get "$_request_url")"
+  _debug "mgw-media.de API response for action '$_action': $response"
+
+  # Check the API response for success. The API returns "OK" on success.
+  if [ "$response" = "OK" ]; then
+    _info "mgw-media.de API action '$_action' for record '$_fulldomain' successful."
+    return 0
+  else
+    _err "Failed mgw-media.de API action '$_action' for record '$_fulldomain'. Unexpected API Response: '$response'"
+    return 1
+  fi
+}

dnsapi/dns_mijnhost.sh

@@ -1,16 +1,15 @@
 #!/usr/bin/env sh
 # shellcheck disable=SC2034
 dns_mijnhost_info='mijn.host
-Domains: mijn.host
 Site: mijn.host
-Docs: https://mijn.host/api/doc/
-Issues: https://github.com/acmesh-official/acme.sh/issues/6177
-Author: peterv99
+Docs: https://github.com/acmesh-official/acme.sh/wiki/dnsapi2#dns_mijnhost
 Options:
  MIJNHOST_API_KEY API Key
+Issues: github.com/acmesh-official/acme.sh/issues/6177
+Author: @peterv99
 '
 
-########  Public functions ###################### Constants for your mijn-host API
+########  Public functions ######################
 MIJNHOST_API="https://mijn.host/api/v2"
 
 # Add TXT record for domain verification

dnsapi/dns_mydnsjp.sh

@@ -6,7 +6,7 @@ Docs: github.com/acmesh-official/acme.sh/wiki/dnsapi#dns_mydnsjp
 Options:
  MYDNSJP_MasterID Master ID
  MYDNSJP_Password Password
-Author: epgdatacapbon
+Author: @tkmsst
 '
 
 ########  Public functions #####################

dnsapi/dns_namecom.sh

@@ -6,7 +6,7 @@ Docs: github.com/acmesh-official/acme.sh/wiki/dnsapi#dns_namecom
 Options:
  Namecom_Username Username
  Namecom_Token API Token
-Author: RaidenII
+Author: @RaidenII
 '
 
 ########  Public functions #####################

dnsapi/dns_namesilo.sh

@@ -5,7 +5,7 @@ Site: NameSilo.com
 Docs: github.com/acmesh-official/acme.sh/wiki/dnsapi#dns_namesilo
 Options:
  Namesilo_Key API Key
-Author: meowthink
+Author: @meowthink
 '
 
 #Utilize API to finish dns-01 verifications.

dnsapi/dns_nanelo.sh

@@ -27,8 +27,16 @@ dns_nanelo_add() {
   fi
   _saveaccountconf_mutable NANELO_TOKEN "$NANELO_TOKEN"
 
+  _debug "First detect the root zone"
+  if ! _get_root "$fulldomain"; then
+    _err "invalid domain"
+    return 1
+  fi
+  _debug _sub_domain "$_sub_domain"
+  _debug _domain "$_domain"
+
   _info "Adding TXT record to ${fulldomain}"
-  response="$(_get "$NANELO_API$NANELO_TOKEN/dns/addrecord?type=TXT&ttl=60&name=${fulldomain}&value=${txtvalue}")"
+  response="$(_post "" "$NANELO_API$NANELO_TOKEN/dns/addrecord?domain=${_domain}&type=TXT&ttl=60&name=${_sub_domain}&value=${txtvalue}" "" "" "")"
   if _contains "${response}" 'success'; then
     return 0
   fi
@@ -51,8 +59,16 @@ dns_nanelo_rm() {
   fi
   _saveaccountconf_mutable NANELO_TOKEN "$NANELO_TOKEN"
 
+  _debug "First, let's detect the root zone:"
+  if ! _get_root "$fulldomain"; then
+    _err "invalid domain"
+    return 1
+  fi
+  _debug _sub_domain "$_sub_domain"
+  _debug _domain "$_domain"
+
   _info "Deleting resource record $fulldomain"
-  response="$(_get "$NANELO_API$NANELO_TOKEN/dns/deleterecord?type=TXT&ttl=60&name=${fulldomain}&value=${txtvalue}")"
+  response="$(_post "" "$NANELO_API$NANELO_TOKEN/dns/deleterecord?domain=${_domain}&type=TXT&ttl=60&name=${_sub_domain}&value=${txtvalue}" "" "" "")"
   if _contains "${response}" 'success'; then
     return 0
   fi
@@ -60,3 +76,45 @@ dns_nanelo_rm() {
   _err "${response}"
   return 1
 }
+
+####################  Private functions below ##################################
+#_acme-challenge.www.domain.com
+#returns
+# _sub_domain=_acme-challenge.www
+# _domain=domain.com
+
+_get_root() {
+  fulldomain=$1
+
+  # Fetch all zones from Nanelo
+  response="$(_get "$NANELO_API$NANELO_TOKEN/dns/getzones")" || return 1
+
+  # Extract "zones" array into space-separated list
+  zones=$(echo "$response" |
+    tr -d ' \n' |
+    sed -n 's/.*"zones":\[\([^]]*\)\].*/\1/p' |
+    tr -d '"' |
+    tr , ' ')
+  _debug zones "$zones"
+
+  bestzone=""
+  for z in $zones; do
+    case "$fulldomain" in
+    *."$z" | "$z")
+      if [ ${#z} -gt ${#bestzone} ]; then
+        bestzone=$z
+      fi
+      ;;
+    esac
+  done
+
+  if [ -z "$bestzone" ]; then
+    _err "No matching zone found for $fulldomain"
+    return 1
+  fi
+
+  _domain="$bestzone"
+  _sub_domain=$(printf "%s" "$fulldomain" | sed "s/\\.$_domain\$//")
+
+  return 0
+}

dnsapi/dns_nsupdate.sh

@@ -6,7 +6,7 @@ Docs: github.com/acmesh-official/acme.sh/wiki/dnsapi#dns_nsupdate
 Options:
  NSUPDATE_SERVER Server hostname. Default: "localhost".
  NSUPDATE_SERVER_PORT Server port. Default: "53".
- NSUPDATE_KEY File path to TSIG key.
+ NSUPDATE_KEY File path to TSIG key. Default: "". Optional.
  NSUPDATE_ZONE Domain zone to update. Optional.
 '
 
@@ -22,8 +22,6 @@ dns_nsupdate_add() {
   NSUPDATE_ZONE="${NSUPDATE_ZONE:-$(_readaccountconf_mutable NSUPDATE_ZONE)}"
   NSUPDATE_OPT="${NSUPDATE_OPT:-$(_readaccountconf_mutable NSUPDATE_OPT)}"
 
-  _checkKeyFile || return 1
-
   # save the dns server and key to the account conf file.
   _saveaccountconf_mutable NSUPDATE_SERVER "${NSUPDATE_SERVER}"
   _saveaccountconf_mutable NSUPDATE_SERVER_PORT "${NSUPDATE_SERVER_PORT}"
@@ -33,27 +31,52 @@ dns_nsupdate_add() {
 
   [ -n "${NSUPDATE_SERVER}" ] || NSUPDATE_SERVER="localhost"
   [ -n "${NSUPDATE_SERVER_PORT}" ] || NSUPDATE_SERVER_PORT=53
+  [ -n "${NSUPDATE_KEY}" ] || NSUPDATE_KEY=""
   [ -n "${NSUPDATE_OPT}" ] || NSUPDATE_OPT=""
 
+  NSUPDATE_SERVER_LIST=$(printf "%s" "$NSUPDATE_SERVER" | tr ',' ' ')
+
   _info "adding ${fulldomain}. 60 in txt \"${txtvalue}\""
   [ -n "$DEBUG" ] && [ "$DEBUG" -ge "$DEBUG_LEVEL_1" ] && nsdebug="-d"
   [ -n "$DEBUG" ] && [ "$DEBUG" -ge "$DEBUG_LEVEL_2" ] && nsdebug="-D"
-  if [ -z "${NSUPDATE_ZONE}" ]; then
-    #shellcheck disable=SC2086
-    nsupdate -k "${NSUPDATE_KEY}" $nsdebug $NSUPDATE_OPT <<EOF
-server ${NSUPDATE_SERVER}  ${NSUPDATE_SERVER_PORT}
+
+  for NS_SERVER in $NSUPDATE_SERVER_LIST; do
+    _info "Updating DNS server: $NS_SERVER"
+
+    if [ -z "${NSUPDATE_ZONE}" ]; then
+      #shellcheck disable=SC2086
+      if [ -z "${NSUPDATE_KEY}" ]; then
+        nsupdate $nsdebug $NSUPDATE_OPT <<EOF
+server ${NS_SERVER}  ${NSUPDATE_SERVER_PORT}
 update add ${fulldomain}. 60 in txt "${txtvalue}"
 send
 EOF
-  else
-    #shellcheck disable=SC2086
-    nsupdate -k "${NSUPDATE_KEY}" $nsdebug $NSUPDATE_OPT <<EOF
-server ${NSUPDATE_SERVER}  ${NSUPDATE_SERVER_PORT}
+      else
+        nsupdate -k "${NSUPDATE_KEY}" $nsdebug $NSUPDATE_OPT <<EOF
+server ${NS_SERVER}  ${NSUPDATE_SERVER_PORT}
+update add ${fulldomain}. 60 in txt "${txtvalue}"
+send
+EOF
+      fi
+    else
+      #shellcheck disable=SC2086
+      if [ -z "${NSUPDATE_KEY}" ]; then
+        nsupdate $nsdebug $NSUPDATE_OPT <<EOF
+server ${NS_SERVER}  ${NSUPDATE_SERVER_PORT}
 zone ${NSUPDATE_ZONE}.
 update add ${fulldomain}. 60 in txt "${txtvalue}"
 send
 EOF
-  fi
+      else
+        nsupdate -k "${NSUPDATE_KEY}" $nsdebug $NSUPDATE_OPT <<EOF
+server ${NS_SERVER}  ${NSUPDATE_SERVER_PORT}
+zone ${NSUPDATE_ZONE}.
+update add ${fulldomain}. 60 in txt "${txtvalue}"
+send
+EOF
+      fi
+    fi
+  done
   if [ $? -ne 0 ]; then
     _err "error updating domain"
     return 1
@@ -72,28 +95,53 @@ dns_nsupdate_rm() {
   NSUPDATE_ZONE="${NSUPDATE_ZONE:-$(_readaccountconf_mutable NSUPDATE_ZONE)}"
   NSUPDATE_OPT="${NSUPDATE_OPT:-$(_readaccountconf_mutable NSUPDATE_OPT)}"
 
-  _checkKeyFile || return 1
   [ -n "${NSUPDATE_SERVER}" ] || NSUPDATE_SERVER="localhost"
   [ -n "${NSUPDATE_SERVER_PORT}" ] || NSUPDATE_SERVER_PORT=53
+  [ -n "${NSUPDATE_KEY}" ] || NSUPDATE_KEY=""
+
+  NSUPDATE_SERVER_LIST=$(printf "%s" "$NSUPDATE_SERVER" | tr ',' ' ')
+
   _info "removing ${fulldomain}. txt"
   [ -n "$DEBUG" ] && [ "$DEBUG" -ge "$DEBUG_LEVEL_1" ] && nsdebug="-d"
   [ -n "$DEBUG" ] && [ "$DEBUG" -ge "$DEBUG_LEVEL_2" ] && nsdebug="-D"
-  if [ -z "${NSUPDATE_ZONE}" ]; then
-    #shellcheck disable=SC2086
-    nsupdate -k "${NSUPDATE_KEY}" $nsdebug $NSUPDATE_OPT <<EOF
-server ${NSUPDATE_SERVER}  ${NSUPDATE_SERVER_PORT}
+
+  for NS_SERVER in $NSUPDATE_SERVER_LIST; do
+    _info "Updating DNS server: $NS_SERVER"
+
+    if [ -z "${NSUPDATE_ZONE}" ]; then
+      #shellcheck disable=SC2086
+      if [ -z "${NSUPDATE_KEY}" ]; then
+        nsupdate $nsdebug $NSUPDATE_OPT <<EOF
+server ${NS_SERVER}  ${NSUPDATE_SERVER_PORT}
 update delete ${fulldomain}. txt
 send
 EOF
-  else
-    #shellcheck disable=SC2086
-    nsupdate -k "${NSUPDATE_KEY}" $nsdebug $NSUPDATE_OPT <<EOF
-server ${NSUPDATE_SERVER}  ${NSUPDATE_SERVER_PORT}
+      else
+        nsupdate -k "${NSUPDATE_KEY}" $nsdebug $NSUPDATE_OPT <<EOF
+server ${NS_SERVER}  ${NSUPDATE_SERVER_PORT}
+update delete ${fulldomain}. txt
+send
+EOF
+      fi
+    else
+      #shellcheck disable=SC2086
+      if [ -z "${NSUPDATE_KEY}" ]; then
+        nsupdate $nsdebug $NSUPDATE_OPT <<EOF
+server ${NS_SERVER}  ${NSUPDATE_SERVER_PORT}
 zone ${NSUPDATE_ZONE}.
 update delete ${fulldomain}. txt
 send
 EOF
-  fi
+      else
+        nsupdate -k "${NSUPDATE_KEY}" $nsdebug $NSUPDATE_OPT <<EOF
+server ${NS_SERVER}  ${NSUPDATE_SERVER_PORT}
+zone ${NSUPDATE_ZONE}.
+update delete ${fulldomain}. txt
+send
+EOF
+      fi
+    fi
+  done
   if [ $? -ne 0 ]; then
     _err "error updating domain"
     return 1
@@ -101,16 +149,3 @@ EOF
 
   return 0
 }
-
-####################  Private functions below ##################################
-
-_checkKeyFile() {
-  if [ -z "${NSUPDATE_KEY}" ]; then
-    _err "you must specify a path to the nsupdate key file"
-    return 1
-  fi
-  if [ ! -r "${NSUPDATE_KEY}" ]; then
-    _err "key ${NSUPDATE_KEY} is unreadable"
-    return 1
-  fi
-}

dnsapi/dns_omglol.sh

@@ -4,8 +4,8 @@ dns_omglol_info='omg.lol
 Site: omg.lol
 Docs: github.com/acmesh-official/acme.sh/wiki/dnsapi2#dns_omglol
 Options:
- OMG_ApiKey API Key. This is accessible from the bottom of the account page at https://home.omg.lol/account
- OMG_Address Address. This is your omg.lol address, without the preceding @ - you can see your list on your dashboard at https://home.omg.lol/dashboard
+ OMG_ApiKey - API Key. This is accessible from the bottom of the account page at https://home.omg.lol/account
+ OMG_Address - Address. This is your omg.lol address, without the preceding @ - you can see your list on your dashboard at https://home.omg.lol/dashboard
 Issues: github.com/acmesh-official/acme.sh/issues/5299
 Author: @Kholin <kholin+acme.omglolapi@omg.lol>
 '
@@ -35,7 +35,7 @@ dns_omglol_add() {
   _debug "omg.lol Address" "$OMG_Address"
 
   omg_validate "$OMG_ApiKey" "$OMG_Address" "$fulldomain"
-  if [ ! $? ]; then
+  if [ 1 = $? ]; then
     return 1
   fi
 
@@ -67,7 +67,7 @@ dns_omglol_rm() {
   _debug "omg.lol Address" "$OMG_Address"
 
   omg_validate "$OMG_ApiKey" "$OMG_Address" "$fulldomain"
-  if [ ! $? ]; then
+  if [ 1 = $? ]; then
     return 1
   fi
 
@@ -100,18 +100,49 @@ omg_validate() {
   fi
 
   _endswith "$fulldomain" "omg.lol"
-  if [ ! $? ]; then
+  if [ 1 = $? ]; then
     _err "Domain name requested is not under omg.lol"
     return 1
   fi
 
   _endswith "$fulldomain" "$omg_address.omg.lol"
-  if [ ! $? ]; then
+  if [ 1 = $? ]; then
     _err "Domain name is not a subdomain of provided omg.lol address $omg_address"
     return 1
   fi
 
-  _debug "Required environment parameters are all present"
+  omg_testconnect "$omg_apikey" "$omg_address"
+  if [ 1 = $? ]; then
+    _err "Authentication to omg.lol for address $omg_address using provided API key failed"
+    return 1
+  fi
+
+  _debug "Required environment parameters are all present and validated"
+}
+
+# Validate that the address and API key are both correct and associated to each other
+omg_testconnect() {
+  omg_apikey=$1
+  omg_address=$2
+
+  _debug2 "Function" "omg_testconnect"
+  _secure_debug2 "omg.lol API key" "$omg_apikey"
+  _debug2 "omg.lol Address" "$omg_address"
+
+  authheader="$(_createAuthHeader "$omg_apikey")"
+  export _H1="$authheader"
+  endpoint="https://api.omg.lol/address/$omg_address/info"
+  _debug2 "Endpoint for validation" "$endpoint"
+
+  response=$(_get "$endpoint" "" 30)
+
+  _jsonResponseCheck "$response" "status_code" 200
+  if [ 1 = $? ]; then
+    _debug2 "Failed to query omg.lol for $omg_address with provided API key"
+    _secure_debug2 "API Key" "omg_apikey"
+    _secure_debug3 "Raw response" "$response"
+    return 1
+  fi
 }
 
 # Add (or modify) an entry for a new ACME query

dnsapi/dns_openprovider_rest.sh

@@ -0,0 +1,186 @@
+#!/usr/bin/env sh
+# shellcheck disable=SC2034
+dns_openprovider_rest_info='OpenProvider (REST)
+Domains: OpenProvider.com
+Site: OpenProvider.eu
+Docs: github.com/acmesh-official/acme.sh/wiki/dnsapi2#dns_openprovider_rest
+Options:
+ OPENPROVIDER_REST_USERNAME Openprovider Account Username
+ OPENPROVIDER_REST_PASSWORD Openprovider Account Password
+Issues: github.com/acmesh-official/acme.sh/issues/6122
+Author: Lambiek12
+'
+
+OPENPROVIDER_API_URL="https://api.openprovider.eu/v1beta"
+
+########  Public functions #####################
+
+# Usage: add  _acme-challenge.www.domain.com  "XKrxpRBosdIKFzxW_CT3KLZNf6q0HG9i01zxXp5CPBs"
+# Used to add txt record
+dns_openprovider_rest_add() {
+  fulldomain=$1
+  txtvalue=$2
+
+  _openprovider_prepare_credentials || return 1
+
+  _debug "Try fetch OpenProvider DNS zone details"
+  if ! _get_dns_zone "$fulldomain"; then
+    _err "DNS zone not found within configured OpenProvider account."
+    return 1
+  fi
+
+  if [ -n "$_domain_id" ]; then
+    addzonerecordrequestparameters="dns/zones/$_domain_name"
+    addzonerecordrequestbody="{\"id\":$_domain_id,\"name\":\"$_domain_name\",\"records\":{\"add\":[{\"name\":\"$_sub_domain\",\"ttl\":900,\"type\":\"TXT\",\"value\":\"$txtvalue\"}]}}"
+
+    if _openprovider_rest PUT "$addzonerecordrequestparameters" "$addzonerecordrequestbody"; then
+      if _contains "$response" "\"success\":true"; then
+        return 0
+      elif _contains "$response" "\"Duplicate record\""; then
+        _debug "Record already existed"
+        return 0
+      else
+        _err "Adding TXT record failed due to errors."
+        return 1
+      fi
+    fi
+  fi
+
+  _err "Adding TXT record failed due to errors."
+  return 1
+}
+
+# Usage: rm  _acme-challenge.www.domain.com  "XKrxpRBosdIKFzxW_CT3KLZNf6q0HG9i01zxXp5CPBs"
+# Used to remove the txt record after validation
+dns_openprovider_rest_rm() {
+  fulldomain=$1
+  txtvalue=$2
+
+  _openprovider_prepare_credentials || return 1
+
+  _debug "Try fetch OpenProvider DNS zone details"
+  if ! _get_dns_zone "$fulldomain"; then
+    _err "DNS zone not found within configured OpenProvider account."
+    return 1
+  fi
+
+  if [ -n "$_domain_id" ]; then
+    removezonerecordrequestparameters="dns/zones/$_domain_name"
+    removezonerecordrequestbody="{\"id\":$_domain_id,\"name\":\"$_domain_name\",\"records\":{\"remove\":[{\"name\":\"$_sub_domain\",\"ttl\":900,\"type\":\"TXT\",\"value\":\"\\\"$txtvalue\\\"\"}]}}"
+
+    if _openprovider_rest PUT "$removezonerecordrequestparameters" "$removezonerecordrequestbody"; then
+      if _contains "$response" "\"success\":true"; then
+        return 0
+      else
+        _err "Removing TXT record failed due to errors."
+        return 1
+      fi
+    fi
+  fi
+
+  _err "Removing TXT record failed due to errors."
+  return 1
+}
+
+####################  OpenProvider API common functions  ####################
+_openprovider_prepare_credentials() {
+  OPENPROVIDER_REST_USERNAME="${OPENPROVIDER_REST_USERNAME:-$(_readaccountconf_mutable OPENPROVIDER_REST_USERNAME)}"
+  OPENPROVIDER_REST_PASSWORD="${OPENPROVIDER_REST_PASSWORD:-$(_readaccountconf_mutable OPENPROVIDER_REST_PASSWORD)}"
+
+  if [ -z "$OPENPROVIDER_REST_USERNAME" ] || [ -z "$OPENPROVIDER_REST_PASSWORD" ]; then
+    OPENPROVIDER_REST_USERNAME=""
+    OPENPROVIDER_REST_PASSWORD=""
+    _err "You didn't specify the Openprovider username or password yet."
+    return 1
+  fi
+
+  #save the credentials to the account conf file.
+  _saveaccountconf_mutable OPENPROVIDER_REST_USERNAME "$OPENPROVIDER_REST_USERNAME"
+  _saveaccountconf_mutable OPENPROVIDER_REST_PASSWORD "$OPENPROVIDER_REST_PASSWORD"
+}
+
+_openprovider_rest() {
+  httpmethod=$1
+  queryparameters=$2
+  requestbody=$3
+
+  _openprovider_rest_login
+  if [ -z "$openproviderauthtoken" ]; then
+    _err "Unable to fetch authentication token from Openprovider API."
+    return 1
+  fi
+
+  export _H1="Content-Type: application/json"
+  export _H2="Accept: application/json"
+  export _H3="Authorization: Bearer $openproviderauthtoken"
+
+  if [ "$httpmethod" != "GET" ]; then
+    response="$(_post "$requestbody" "$OPENPROVIDER_API_URL/$queryparameters" "" "$httpmethod")"
+  else
+    response="$(_get "$OPENPROVIDER_API_URL/$queryparameters")"
+  fi
+
+  if [ "$?" != "0" ]; then
+    _err "No valid parameters supplied for Openprovider API: Error $queryparameters"
+    return 1
+  fi
+
+  _debug2 response "$response"
+
+  return 0
+}
+
+_openprovider_rest_login() {
+  export _H1="Content-Type: application/json"
+  export _H2="Accept: application/json"
+
+  loginrequesturl="$OPENPROVIDER_API_URL/auth/login"
+  loginrequestbody="{\"ip\":\"0.0.0.0\",\"password\":\"$OPENPROVIDER_REST_PASSWORD\",\"username\":\"$OPENPROVIDER_REST_USERNAME\"}"
+  loginresponse="$(_post "$loginrequestbody" "$loginrequesturl" "" "POST")"
+
+  openproviderauthtoken="$(printf "%s\n" "$loginresponse" | _egrep_o '"token" *: *"[^"]*' | _head_n 1 | sed 's#^"token" *: *"##')"
+
+  export openproviderauthtoken
+}
+
+####################  Private functions ##################################
+
+# Usage: _get_dns_zone _acme-challenge.www.domain.com
+# Returns:
+# _domain_id=123456789
+# _domain_name=domain.com
+# _sub_domain=_acme-challenge.www
+_get_dns_zone() {
+  domain=$1
+  i=1
+  p=1
+
+  while true; do
+    h=$(printf "%s" "$domain" | cut -d . -f "$i"-100)
+    if [ -z "$h" ]; then
+      # Empty value not allowed
+      return 1
+    fi
+
+    if ! _openprovider_rest GET "dns/zones/$h" ""; then
+      return 1
+    fi
+
+    if _contains "$response" "\"name\":\"$h\""; then
+      _domain_id="$(printf "%s\n" "$response" | _egrep_o '"id" *: *[^,]*' | _head_n 1 | sed 's#^"id" *: *##')"
+      _debug _domain_id "$_domain_id"
+
+      _domain_name="$h"
+      _debug _domain_name "$_domain_name"
+
+      _sub_domain=$(printf "%s" "$domain" | cut -d . -f 1-"$p")
+      _debug _sub_domain "$_sub_domain"
+      return 0
+    fi
+
+    p=$i
+    i=$(_math "$i" + 1)
+  done
+
+  return 1
+}

dnsapi/dns_opnsense.sh

@@ -110,15 +110,16 @@ rm_record() {
   if _existingchallenge "$_domain" "$_host" "$new_challenge"; then
     # Delete
     if _opns_rest "POST" "/record/delRecord/${_uuid}" "\{\}"; then
-      if echo "$_return_str" | _egrep_o "\"result\":\"deleted\"" >/dev/null; then
-        _opns_rest "POST" "/service/reconfigure" "{}"
+      if echo "$response" | _egrep_o "\"result\":\"deleted\"" >/dev/null; then
         _debug "Record deleted"
+        _opns_rest "POST" "/service/reconfigure" "{}"
+        _debug "Service reconfigured"
       else
         _err "Error deleting record $_host from domain $fulldomain"
         return 1
       fi
     else
-      _err "Error deleting record $_host from domain $fulldomain"
+      _err "Error requesting deletion of record $_host from domain $fulldomain"
       return 1
     fi
   else
@@ -150,14 +151,17 @@ _get_root() {
       return 1
     fi
     _debug h "$h"
-    id=$(echo "$_domain_response" | _egrep_o "\"uuid\":\"[a-z0-9\-]*\",\"enabled\":\"1\",\"type\":\"primary\",\"domainname\":\"${h}\"" | cut -d ':' -f 2 | cut -d '"' -f 2)
-    if [ -n "$id" ]; then
-      _debug id "$id"
-      _host=$(printf "%s" "$domain" | cut -d . -f 1-"$p")
-      _domain="${h}"
-      _domainid="${id}"
-      return 0
-    fi
+    lines=$(echo "$_domain_response" | sed 's/{/\n/g')
+    for line in $lines; do
+      id=$(echo "$line" | _egrep_o "\"uuid\":\"[a-z0-9\-]*\",\"enabled\":\"1\",\"type\":\"primary\",.*\"domainname\":\"${h}\"" | cut -d ':' -f 2 | cut -d '"' -f 2)
+      if [ -n "$id" ]; then
+        _debug id "$id"
+        _host=$(printf "%s" "$domain" | cut -d . -f 1-"$p")
+        _domain="${h}"
+        _domainid="${id}"
+        return 0
+      fi
+    done
     p=$i
     i=$(_math "$i" + 1)
   done
@@ -206,13 +210,13 @@ _existingchallenge() {
     return 1
   fi
   _uuid=""
-  _uuid=$(echo "$_record_response" | _egrep_o "\"uuid\":\"[^\"]*\",\"enabled\":\"[01]\",\"domain\":\"$1\",\"name\":\"$2\",\"type\":\"TXT\",\"value\":\"$3\"" | cut -d ':' -f 2 | cut -d '"' -f 2)
+  _uuid=$(echo "$_record_response" | _egrep_o "\"uuid\":\"[a-z0-9\-]*\",\"enabled\":\"[01]\",\"domain\":\"[a-z0-9\-]*\",\"%domain\":\"$1\",\"name\":\"$2\",\"type\":\"TXT\",\"value\":\"$3\"" | cut -d ':' -f 2 | cut -d '"' -f 2)
 
   if [ -n "$_uuid" ]; then
     _debug uuid "$_uuid"
     return 0
   fi
-  _debug "${2}.$1{1} record not found"
+  _debug "${2}.${1} record not found"
 
   return 1
 }

dnsapi/dns_opusdns.sh

@@ -0,0 +1,158 @@
+#!/usr/bin/env sh
+
+# shellcheck disable=SC2034
+dns_opusdns_info='OpusDNS.com
+Site: OpusDNS.com
+Docs: github.com/acmesh-official/acme.sh/wiki/dnsapi#dns_opusdns
+Options:
+ OPUSDNS_API_Key API Key. Can be created at https://dashboard.opusdns.com/settings/api-keys
+ OPUSDNS_API_Endpoint API Endpoint URL. Default "https://api.opusdns.com". Optional.
+ OPUSDNS_TTL TTL for DNS challenge records in seconds. Default "60". Optional.
+Issues: github.com/acmesh-official/acme.sh/issues/XXXX
+Author: OpusDNS Team <https://github.com/opusdns>
+'
+
+OPUSDNS_API_Endpoint_Default="https://api.opusdns.com"
+OPUSDNS_TTL_Default=60
+
+######## Public functions ###########
+
+# Add DNS TXT record
+dns_opusdns_add() {
+  fulldomain=$1
+  txtvalue=$2
+
+  _info "Using OpusDNS DNS API"
+  _debug fulldomain "$fulldomain"
+  _debug txtvalue "$txtvalue"
+
+  if ! _opusdns_init; then
+    return 1
+  fi
+
+  if ! _get_zone "$fulldomain"; then
+    return 1
+  fi
+
+  _info "Zone: $_zone, Record: $_record_name"
+
+  if ! _opusdns_api PATCH "/v1/dns/$_zone/records" "{\"ops\":[{\"op\":\"upsert\",\"record\":{\"name\":\"$_record_name\",\"type\":\"TXT\",\"ttl\":$OPUSDNS_TTL,\"rdata\":\"\\\"$txtvalue\\\"\"}}]}"; then
+    _err "Failed to add TXT record"
+    return 1
+  fi
+
+  _info "TXT record added successfully"
+  return 0
+}
+
+# Remove DNS TXT record
+dns_opusdns_rm() {
+  fulldomain=$1
+  txtvalue=$2
+
+  _info "Removing OpusDNS DNS record"
+  _debug fulldomain "$fulldomain"
+  _debug txtvalue "$txtvalue"
+
+  if ! _opusdns_init; then
+    return 1
+  fi
+
+  if ! _get_zone "$fulldomain"; then
+    _err "Zone not found, cleanup skipped"
+    return 0
+  fi
+
+  _info "Zone: $_zone, Record: $_record_name"
+
+  if ! _opusdns_api PATCH "/v1/dns/$_zone/records" "{\"ops\":[{\"op\":\"remove\",\"record\":{\"name\":\"$_record_name\",\"type\":\"TXT\",\"ttl\":$OPUSDNS_TTL,\"rdata\":\"\\\"$txtvalue\\\"\"}}]}"; then
+    _err "Warning: Failed to remove TXT record"
+    return 0
+  fi
+
+  _info "TXT record removed successfully"
+  return 0
+}
+
+######## Private functions ###########
+
+# Initialize and validate configuration
+_opusdns_init() {
+  OPUSDNS_API_Key="${OPUSDNS_API_Key:-$(_readaccountconf_mutable OPUSDNS_API_Key)}"
+  OPUSDNS_API_Endpoint="${OPUSDNS_API_Endpoint:-$(_readaccountconf_mutable OPUSDNS_API_Endpoint)}"
+  OPUSDNS_TTL="${OPUSDNS_TTL:-$(_readaccountconf_mutable OPUSDNS_TTL)}"
+
+  if [ -z "$OPUSDNS_API_Key" ]; then
+    _err "OPUSDNS_API_Key not set"
+    return 1
+  fi
+
+  [ -z "$OPUSDNS_API_Endpoint" ] && OPUSDNS_API_Endpoint="$OPUSDNS_API_Endpoint_Default"
+  [ -z "$OPUSDNS_TTL" ] && OPUSDNS_TTL="$OPUSDNS_TTL_Default"
+
+  _saveaccountconf_mutable OPUSDNS_API_Key "$OPUSDNS_API_Key"
+  _saveaccountconf_mutable OPUSDNS_API_Endpoint "$OPUSDNS_API_Endpoint"
+  _saveaccountconf_mutable OPUSDNS_TTL "$OPUSDNS_TTL"
+
+  _debug "Endpoint: $OPUSDNS_API_Endpoint"
+  return 0
+}
+
+# Make API request
+# Usage: _opusdns_api METHOD PATH [DATA]
+_opusdns_api() {
+  method=$1
+  path=$2
+  data=$3
+
+  export _H1="X-Api-Key: $OPUSDNS_API_Key"
+  export _H2="Content-Type: application/json"
+
+  url="$OPUSDNS_API_Endpoint$path"
+  _debug2 "API: $method $url"
+  [ -n "$data" ] && _debug2 "Data: $data"
+
+  if [ -n "$data" ]; then
+    response=$(_post "$data" "$url" "" "$method")
+  else
+    response=$(_get "$url")
+  fi
+
+  if [ $? -ne 0 ]; then
+    _err "API request failed"
+    _debug "Response: $response"
+    return 1
+  fi
+
+  _debug2 "Response: $response"
+  return 0
+}
+
+# Detect zone from FQDN
+# Sets: _zone, _record_name
+_get_zone() {
+  domain=$(echo "$1" | sed 's/\.$//')
+  _debug "Finding zone for: $domain"
+
+  i=1
+  p=1
+  while true; do
+    h=$(printf "%s" "$domain" | cut -d . -f "$i"-100)
+
+    if [ -z "$h" ]; then
+      _err "No valid zone found for: $domain"
+      return 1
+    fi
+
+    _debug "Trying: $h"
+    if _opusdns_api GET "/v1/dns/$h" && _contains "$response" '"dnssec_status"'; then
+      _zone="$h"
+      _record_name=$(printf "%s" "$domain" | cut -d . -f 1-"$p")
+      [ -z "$_record_name" ] && _record_name="@"
+      return 0
+    fi
+
+    p="$i"
+    i=$(_math "$i" + 1)
+  done
+}

dnsapi/dns_ovh.sh

@@ -201,7 +201,7 @@ dns_ovh_rm() {
     if ! _ovh_rest GET "domain/zone/$_domain/record/$rid"; then
       return 1
     fi
-    if _contains "$response" "\"target\":\"$txtvalue\""; then
+    if _contains "$response" "$txtvalue"; then
       _debug "Found txt id:$rid"
       if ! _ovh_rest DELETE "domain/zone/$_domain/record/$rid"; then
         return 1

dnsapi/dns_pleskxml.sh

@@ -8,7 +8,7 @@ Options:
  pleskxml_user Username
  pleskxml_pass Password
 Issues: github.com/acmesh-official/acme.sh/issues/2577
-Author: Stilez, <https://github.com/romanlum>
+Author: @Stilez, @romanlum
 '
 
 ##  Plesk XML API described at:

dnsapi/dns_qc.sh

@@ -0,0 +1,216 @@
+#!/usr/bin/env sh
+# shellcheck disable=SC2034
+dns_qc_info='QUIC.cloud
+Site: quic.cloud
+Docs: github.com/acmesh-official/acme.sh/wiki/dnsapi#dns_qc
+Options:
+ QC_API_KEY QC API Key
+ QC_API_EMAIL Your account email
+'
+
+QC_Api="https://api.quic.cloud/v2"
+
+########  Public functions #####################
+
+#Usage: add  _acme-challenge.www.domain.com   "XKrxpRBosdIKFzxW_CT3KLZNf6q0HG9i01zxXp5CPBs"
+dns_qc_add() {
+  fulldomain=$1
+  txtvalue=$2
+
+  _debug "Enter dns_qc_add fulldomain: $fulldomain, txtvalue: $txtvalue"
+  QC_API_KEY="${QC_API_KEY:-$(_readaccountconf_mutable QC_API_KEY)}"
+  QC_API_EMAIL="${QC_API_EMAIL:-$(_readaccountconf_mutable QC_API_EMAIL)}"
+
+  if [ "$QC_API_KEY" ]; then
+    _saveaccountconf_mutable QC_API_KEY "$QC_API_KEY"
+  else
+    _err "You didn't specify a QUIC.cloud api key as QC_API_KEY."
+    _err "You can get yours from here https://my.quic.cloud/up/api."
+    return 1
+  fi
+
+  if ! _contains "$QC_API_EMAIL" "@"; then
+    _err "It seems that the QC_API_EMAIL=$QC_API_EMAIL is not a valid email address."
+    _err "Please check and retry."
+    return 1
+  fi
+  #save the api key and email to the account conf file.
+  _saveaccountconf_mutable QC_API_EMAIL "$QC_API_EMAIL"
+
+  _debug "First detect the root zone"
+  if ! _get_root "$fulldomain"; then
+    _err "invalid domain during add"
+    return 1
+  fi
+  _debug _domain_id "$_domain_id"
+  _debug _sub_domain "$_sub_domain"
+  _debug _domain "$_domain"
+
+  _debug "Getting txt records"
+  _qc_rest GET "zones/${_domain_id}/records"
+
+  if ! echo "$response" | tr -d " " | grep \"success\":true >/dev/null; then
+    _err "Error failed response from QC GET: $response"
+    return 1
+  fi
+
+  # For wildcard cert, the main root domain and the wildcard domain have the same txt subdomain name, so
+  # we can not use updating anymore.
+  #  count=$(printf "%s\n" "$response" | _egrep_o "\"count\":[^,]*" | cut -d : -f 2)
+  #  _debug count "$count"
+  #  if [ "$count" = "0" ]; then
+  _info "Adding txt record"
+  if _qc_rest POST "zones/$_domain_id/records" "{\"type\":\"TXT\",\"name\":\"$fulldomain\",\"content\":\"$txtvalue\",\"ttl\":1800}"; then
+    if _contains "$response" "$txtvalue"; then
+      _info "Added txt record, OK"
+      return 0
+    elif _contains "$response" "Same record already exists"; then
+      _info "txt record already exists, OK"
+      return 0
+    else
+      _err "Add txt record error: $response"
+      return 1
+    fi
+  fi
+  _err "Add txt record error: POST failed: $response"
+  return 1
+
+}
+
+#fulldomain txtvalue
+dns_qc_rm() {
+  fulldomain=$1
+  txtvalue=$2
+
+  _debug "Enter dns_qc_rm fulldomain: $fulldomain, txtvalue: $txtvalue"
+  QC_API_KEY="${QC_API_KEY:-$(_readaccountconf_mutable QC_API_KEY)}"
+  QC_API_EMAIL="${QC_API_EMAIL:-$(_readaccountconf_mutable QC_API_EMAIL)}"
+
+  _debug "First detect the root zone"
+  if ! _get_root "$fulldomain"; then
+    _err "invalid domain during rm"
+    return 1
+  fi
+  _debug _domain_id "$_domain_id"
+  _debug _sub_domain "$_sub_domain"
+  _debug _domain "$_domain"
+
+  _debug "Getting txt records"
+  _qc_rest GET "zones/${_domain_id}/records"
+
+  if ! echo "$response" | tr -d " " | grep \"success\":true >/dev/null; then
+    _err "Error rm GET response: $response"
+    return 1
+  fi
+
+  _debug "Pre-jq response:" "$response"
+  # Do not use jq or subsequent code
+  #response=$(echo "$response" | jq ".result[] | select(.id) | select(.content == \"$txtvalue\") | select(.type == \"TXT\")")
+  #_debug "get txt response" "$response"
+  #if [ "${response}" = "" ]; then
+  #  _info "Don't need to remove txt records."
+  #  return 0
+  #fi
+  #record_id=$(echo "$response" | grep \"id\" | awk -F ' ' '{print $2}' | sed 's/,$//')
+  #_debug "txt record_id" "$record_id"
+  #Instead of jq
+  array=$(echo "$response" | grep -o '\[[^]]*\]' | sed 's/^\[\(.*\)\]$/\1/')
+  if [ -z "$array" ]; then
+    _err "Expected array in QC response: $response"
+    return 1
+  fi
+  # Temporary file to hold matched content (one per line)
+  tmpfile=$(_mktemp)
+  echo "$array" | grep -o '{[^}]*}' | sed 's/^{//;s/}$//' >"$tmpfile"
+  record_id=""
+
+  while IFS= read -r obj || [ -n "$obj" ]; do
+    if echo "$obj" | grep -q '"TXT"' && echo "$obj" | grep -q '"id"' && echo "$obj" | grep -q "$txtvalue"; then
+      _debug "response includes" "$obj"
+      record_id=$(echo "$obj" | sed 's/^\"id\":\([0-9]\+\).*/\1/')
+      break
+    fi
+  done <"$tmpfile"
+
+  rm "$tmpfile"
+
+  if [ -z "$record_id" ]; then
+    _info "TXT record, or $txtvalue not found, nothing to remove"
+    return 0
+  fi
+
+  #End of jq replacement
+  if ! _qc_rest DELETE "zones/$_domain_id/records/$record_id"; then
+    _info "Delete txt record error."
+    return 1
+  fi
+
+  _info "TXT Record ID: $record_id successfully deleted"
+  return 0
+
+}
+
+####################  Private functions below ##################################
+#_acme-challenge.www.domain.com
+#returns
+# _sub_domain=_acme-challenge.www
+# _domain=domain.com
+# _domain_id=sdjkglgdfewsdfg
+_get_root() {
+  domain=$1
+  i=1
+  p=1
+
+  h=$(printf "%s" "$domain" | cut -d . -f2-)
+  _debug h "$h"
+  if [ -z "$h" ]; then
+    _err "$h ($domain) is an invalid domain"
+    return 1
+  fi
+
+  if ! _qc_rest GET "zones"; then
+    _err "qc_rest failed"
+    return 1
+  fi
+
+  if _contains "$response" "\"name\":\"$h\"" || _contains "$response" "\"name\":\"$h.\""; then
+    _domain_id=$h
+    if [ "$_domain_id" ]; then
+      _sub_domain=$(printf "%s" "$domain" | cut -d . -f 1-"$p")
+      _domain=$h
+      return 0
+    fi
+    _err "Empty domain_id $h"
+    return 1
+  fi
+  _err "Missing domain_id $h"
+  return 1
+}
+
+_qc_rest() {
+  m=$1
+  ep="$2"
+  data="$3"
+  _debug "$ep"
+
+  email_trimmed=$(echo "$QC_API_EMAIL" | tr -d '"')
+  token_trimmed=$(echo "$QC_API_KEY" | tr -d '"')
+
+  export _H1="Content-Type: application/json"
+  export _H2="X-Auth-Email: $email_trimmed"
+  export _H3="X-Auth-Key: $token_trimmed"
+
+  if [ "$m" != "GET" ]; then
+    _debug data "$data"
+    response="$(_post "$data" "$QC_Api/$ep" "" "$m")"
+  else
+    response="$(_get "$QC_Api/$ep")"
+  fi
+
+  if [ "$?" != "0" ]; then
+    _err "error $ep"
+    return 1
+  fi
+  _debug2 response "$response"
+  return 0
+}