Support wget2 in the wget code path

Fedora 40 and later ship wget2 as wget. Under -q it prints nothing for -S,
so $HTTP_HEADER stayed empty in wget mode (ACME_USE_WGET=1, or no curl):
no status code, no Replay-Nonce, no Location, and every ACME request
failed. Without -q its own "HTTP response 200 OK [url]" line would be read
as the status line, and a HEAD response gets no headers at all.

Detect wget2 by its --version line and run it without -q (and without -d,
whose demultiplexing expects wget 1.x output). _wget2_headers keeps only
the header blocks of its stderr; for a response without a body, where
wget2 prints no block, it rebuilds the status line from the "HTTP
response" line. HEAD goes through --method HEAD --save-headers, which
writes the headers into $HTTP_HEADER. wget 1.x and curl are unchanged.

.github/workflows/Apache.yml

@@ -0,0 +1,50 @@
+name: Apache
+on:
+  push:
+    paths:
+      - '*.sh'
+      - '.github/workflows/Apache.yml'
+  pull_request:
+    branches:
+      - dev
+    paths:
+      - '*.sh'
+      - '.github/workflows/Apache.yml'
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+
+jobs:
+  Apache:
+    runs-on: ubuntu-latest
+    env:
+      TestingDomain: example.com
+      TEST_ACME_Server: https://localhost:14000/dir
+      HTTPS_INSECURE: 1
+      TEST_LOCAL: 1
+      TEST_CA: "Pebble Intermediate CA"
+      TEST_APACHE: 1
+      CASE: le_test_apache
+    steps:
+    - uses: actions/checkout@v6
+    - name: Install tools
+      run: sudo apt-get install -y socat apache2
+    - name: Run Pebble
+      run: cd .. && curl https://raw.githubusercontent.com/letsencrypt/pebble/master/docker-compose.yml >docker-compose.yml && docker compose up -d
+    - name: Set up Pebble
+      run: curl --request POST --data '{"ip":"10.30.50.1"}' http://localhost:8055/set-default-ipv4
+    - name: Set up Apache
+      # Apache serves on 5002, which is the HTTP-01 validation port in
+      # Pebble's default config; acme.sh appends the challenge Alias to
+      # the main config itself
+      run: |
+        echo "Listen 5002" | sudo tee /etc/apache2/ports.conf
+        sudo sed -i "s/\*:80/*:5002/" /etc/apache2/sites-available/000-default.conf
+        sudo apache2ctl configtest
+        sudo systemctl restart apache2
+        curl -s -o /dev/null -w "%{http_code}" -H "Host: example.com" http://127.0.0.1:5002/ | grep -E "200|403|404"
+    - name: Clone acmetest
+      run: cd .. && git clone --depth=1 https://github.com/acmesh-official/acmetest.git  && cp -r acme.sh acmetest/
+    - name: Run acmetest
+      run: cd ../acmetest && sudo --preserve-env ./letest.sh

.github/workflows/DNS.yml

@@ -26,9 +26,9 @@ jobs:
         id: step_one
         run: |
           if [ "${{secrets.TokenName1}}" ] ; then
-            echo "::set-output name=hasToken::true"
+            echo "hasToken=true" >> "$GITHUB_OUTPUT"
           else
-            echo "::set-output name=hasToken::false"
+            echo "hasToken=false" >> "$GITHUB_OUTPUT"
           fi
       - name: Check the value
         run: echo ${{ steps.step_one.outputs.hasToken }}
@@ -66,7 +66,7 @@ jobs:
       TokenName4: ${{ secrets.TokenName4}}
       TokenName5: ${{ secrets.TokenName5}}
     steps:
-    - uses: actions/checkout@v6
+    - uses: actions/checkout@v7
     - name: Clone acmetest
       run: cd .. && git clone --depth=1 https://github.com/acmesh-official/acmetest.git  && cp -r acme.sh acmetest/
     - name: Set env file
@@ -114,9 +114,11 @@ jobs:
       TokenName4: ${{ secrets.TokenName4}}
       TokenName5: ${{ secrets.TokenName5}}
     steps:
-    - uses: actions/checkout@v6
+    - uses: actions/checkout@v7
     - name: Install tools
-      run:  brew install socat
+      run: |
+        brew untap aws/tap || true
+        brew install socat
     - name: Clone acmetest
       run: cd .. && git clone --depth=1 https://github.com/acmesh-official/acmetest.git  && cp -r acme.sh acmetest/
     - name: Run acmetest
@@ -165,7 +167,7 @@ jobs:
     - name: Set git to use LF
       run: |
           git config --global core.autocrlf false
-    - uses: actions/checkout@v6
+    - uses: actions/checkout@v7
     - name: Install cygwin base packages with chocolatey
       run: |
           choco config get cacheLocation
@@ -176,9 +178,14 @@ jobs:
           C:\tools\cygwin\cygwinsetup.exe -qgnNdO -R C:/tools/cygwin -s https://mirrors.kernel.org/sourceware/cygwin/ -P socat,curl,cron,unzip,git
       shell: cmd
     - name: Set ENV
-      shell: cmd
+      shell: bash
       run: |
-          echo PATH=C:\tools\cygwin\bin;C:\tools\cygwin\usr\bin >> %GITHUB_ENV%
+          echo 'PATH=C:\tools\cygwin\bin;C:\tools\cygwin\usr\bin' >> "$GITHUB_ENV"
+          # cygwin git sees the runner workspace as owned by another user and
+          # fails with "dubious ownership" (exit 128) in the checkout post step
+          echo 'GIT_CONFIG_COUNT=1' >> "$GITHUB_ENV"
+          echo 'GIT_CONFIG_KEY_0=safe.directory' >> "$GITHUB_ENV"
+          echo 'GIT_CONFIG_VALUE_0=*' >> "$GITHUB_ENV"
     - name: Clone acmetest
       run: cd .. && git clone --depth=1 https://github.com/acmesh-official/acmetest.git  && cp -r acme.sh acmetest/
     - name: Run acmetest
@@ -224,12 +231,72 @@ jobs:
       TokenName4: ${{ secrets.TokenName4}}
       TokenName5: ${{ secrets.TokenName5}}
     steps:
-    - uses: actions/checkout@v6
+    - uses: actions/checkout@v7
     - name: Clone acmetest
       run: cd .. && git clone --depth=1 https://github.com/acmesh-official/acmetest.git  && cp -r acme.sh acmetest/
     - uses: vmactions/freebsd-vm@v1
       with:
         debug-on-error: ${{ vars.DEBUG_ON_ERROR }}
+        cache-after-prepare: true
+        envs: 'TEST_DNS TestingDomain TEST_DNS_NO_WILDCARD TEST_DNS_NO_SUBDOMAIN TEST_DNS_SLEEP CASE TEST_LOCAL DEBUG http_proxy https_proxy TokenName1 TokenName2 TokenName3 TokenName4 TokenName5 ${{ secrets.TokenName1}} ${{ secrets.TokenName2}} ${{ secrets.TokenName3}} ${{ secrets.TokenName4}} ${{ secrets.TokenName5}}'
+        prepare: pkg install -y socat curl
+        usesh: true
+        sync: nfs
+        run: |
+          if [ "${{ secrets.TokenName1}}" ] ; then
+            export ${{ secrets.TokenName1}}="${{ secrets.TokenValue1}}"
+          fi
+          if [ "${{ secrets.TokenName2}}" ] ; then
+            export ${{ secrets.TokenName2}}="${{ secrets.TokenValue2}}"
+          fi
+          if [ "${{ secrets.TokenName3}}" ] ; then
+            export ${{ secrets.TokenName3}}="${{ secrets.TokenValue3}}"
+          fi
+          if [ "${{ secrets.TokenName4}}" ] ; then
+            export ${{ secrets.TokenName4}}="${{ secrets.TokenValue4}}"
+          fi
+          if [ "${{ secrets.TokenName5}}" ] ; then
+            export ${{ secrets.TokenName5}}="${{ secrets.TokenValue5}}"
+          fi
+          cd ../acmetest
+          ./letest.sh
+    - name: DebugOnError
+      if: ${{ failure() }}
+      run: |
+        echo "See how to debug in VM:"
+        echo "https://github.com/acmesh-official/acme.sh/wiki/debug-in-VM"
+
+
+
+  GhostBSD:
+    runs-on: ubuntu-latest
+    needs: FreeBSD
+    # GhostBSD VM frequently flakes on boot/ssh; don't let it fail the whole run
+    continue-on-error: true
+    env:
+      TEST_DNS : ${{ secrets.TEST_DNS }}
+      TestingDomain: ${{ secrets.TestingDomain }}
+      TEST_DNS_NO_WILDCARD: ${{ secrets.TEST_DNS_NO_WILDCARD }}
+      TEST_DNS_NO_SUBDOMAIN: ${{ secrets.TEST_DNS_NO_SUBDOMAIN }}
+      TEST_DNS_SLEEP: ${{ secrets.TEST_DNS_SLEEP }}
+      CASE: le_test_dnsapi
+      TEST_LOCAL: 1
+      DEBUG: ${{ secrets.DEBUG }}
+      http_proxy: ${{ secrets.http_proxy }}
+      https_proxy: ${{ secrets.https_proxy }}
+      TokenName1: ${{ secrets.TokenName1}}
+      TokenName2: ${{ secrets.TokenName2}}
+      TokenName3: ${{ secrets.TokenName3}}
+      TokenName4: ${{ secrets.TokenName4}}
+      TokenName5: ${{ secrets.TokenName5}}
+    steps:
+    - uses: actions/checkout@v7
+    - name: Clone acmetest
+      run: cd .. && git clone --depth=1 https://github.com/acmesh-official/acmetest.git  && cp -r acme.sh acmetest/
+    - uses: vmactions/ghostbsd-vm@v1
+      with:
+        debug-on-error: ${{ vars.DEBUG_ON_ERROR }}
+        cache-after-prepare: true
         envs: 'TEST_DNS TestingDomain TEST_DNS_NO_WILDCARD TEST_DNS_NO_SUBDOMAIN TEST_DNS_SLEEP CASE TEST_LOCAL DEBUG http_proxy https_proxy TokenName1 TokenName2 TokenName3 TokenName4 TokenName5 ${{ secrets.TokenName1}} ${{ secrets.TokenName2}} ${{ secrets.TokenName3}} ${{ secrets.TokenName4}} ${{ secrets.TokenName5}}'
         prepare: pkg install -y socat curl
         usesh: true
@@ -262,7 +329,7 @@ jobs:
 
   OpenBSD:
     runs-on: ubuntu-latest
-    needs: FreeBSD
+    needs: GhostBSD
     env:
       TEST_DNS : ${{ secrets.TEST_DNS }}
       TestingDomain: ${{ secrets.TestingDomain }}
@@ -280,12 +347,13 @@ jobs:
       TokenName4: ${{ secrets.TokenName4}}
       TokenName5: ${{ secrets.TokenName5}}
     steps:
-    - uses: actions/checkout@v6
+    - uses: actions/checkout@v7
     - name: Clone acmetest
       run: cd .. && git clone --depth=1 https://github.com/acmesh-official/acmetest.git  && cp -r acme.sh acmetest/
     - uses: vmactions/openbsd-vm@v1
       with:
         debug-on-error: ${{ vars.DEBUG_ON_ERROR }}
+        cache-after-prepare: true
         envs: 'TEST_DNS TestingDomain TEST_DNS_NO_WILDCARD TEST_DNS_NO_SUBDOMAIN TEST_DNS_SLEEP CASE TEST_LOCAL DEBUG http_proxy https_proxy TokenName1 TokenName2 TokenName3 TokenName4 TokenName5 ${{ secrets.TokenName1}} ${{ secrets.TokenName2}} ${{ secrets.TokenName3}} ${{ secrets.TokenName4}} ${{ secrets.TokenName5}}'
         prepare: pkg_add socat curl libiconv
         usesh: true
@@ -336,12 +404,13 @@ jobs:
       TokenName4: ${{ secrets.TokenName4}}
       TokenName5: ${{ secrets.TokenName5}}
     steps:
-    - uses: actions/checkout@v6
+    - uses: actions/checkout@v7
     - name: Clone acmetest
       run: cd .. && git clone --depth=1 https://github.com/acmesh-official/acmetest.git  && cp -r acme.sh acmetest/
     - uses: vmactions/netbsd-vm@v1
       with:
         debug-on-error: ${{ vars.DEBUG_ON_ERROR }}
+        cache-after-prepare: true
         envs: 'TEST_DNS TestingDomain TEST_DNS_NO_WILDCARD TEST_DNS_NO_SUBDOMAIN TEST_DNS_SLEEP CASE TEST_LOCAL DEBUG http_proxy https_proxy TokenName1 TokenName2 TokenName3 TokenName4 TokenName5 ${{ secrets.TokenName1}} ${{ secrets.TokenName2}} ${{ secrets.TokenName3}} ${{ secrets.TokenName4}} ${{ secrets.TokenName5}}'
         prepare: |
           /usr/sbin/pkg_add curl socat
@@ -393,12 +462,13 @@ jobs:
       TokenName4: ${{ secrets.TokenName4}}
       TokenName5: ${{ secrets.TokenName5}}
     steps:
-    - uses: actions/checkout@v6
+    - uses: actions/checkout@v7
     - name: Clone acmetest
       run: cd .. && git clone --depth=1 https://github.com/acmesh-official/acmetest.git  && cp -r acme.sh acmetest/
     - uses: vmactions/dragonflybsd-vm@v1
       with:
         debug-on-error: ${{ vars.DEBUG_ON_ERROR }}
+        cache-after-prepare: true
         envs: 'TEST_DNS TestingDomain TEST_DNS_NO_WILDCARD TEST_DNS_NO_SUBDOMAIN TEST_DNS_SLEEP CASE TEST_LOCAL DEBUG http_proxy https_proxy TokenName1 TokenName2 TokenName3 TokenName4 TokenName5 ${{ secrets.TokenName1}} ${{ secrets.TokenName2}} ${{ secrets.TokenName3}} ${{ secrets.TokenName4}} ${{ secrets.TokenName5}}'
         prepare: |
           pkg install -y libnghttp2
@@ -454,12 +524,13 @@ jobs:
       TokenName4: ${{ secrets.TokenName4}}
       TokenName5: ${{ secrets.TokenName5}}
     steps:
-    - uses: actions/checkout@v6
+    - uses: actions/checkout@v7
     - name: Clone acmetest
       run: cd .. && git clone --depth=1 https://github.com/acmesh-official/acmetest.git  && cp -r acme.sh acmetest/
     - uses: vmactions/midnightbsd-vm@v1
       with:
         debug-on-error: ${{ vars.DEBUG_ON_ERROR }}
+        cache-after-prepare: true
         envs: 'TEST_DNS TestingDomain TEST_DNS_NO_WILDCARD TEST_DNS_NO_SUBDOMAIN TEST_DNS_SLEEP CASE TEST_LOCAL DEBUG http_proxy https_proxy TokenName1 TokenName2 TokenName3 TokenName4 TokenName5 ${{ secrets.TokenName1}} ${{ secrets.TokenName2}} ${{ secrets.TokenName3}} ${{ secrets.TokenName4}} ${{ secrets.TokenName5}}'
         prepare: mport install socat curl || true
         usesh: true
@@ -511,12 +582,13 @@ jobs:
       TokenName4: ${{ secrets.TokenName4}}
       TokenName5: ${{ secrets.TokenName5}}
     steps:
-    - uses: actions/checkout@v6
+    - uses: actions/checkout@v7
     - name: Clone acmetest
       run: cd .. && git clone --depth=1 https://github.com/acmesh-official/acmetest.git  && cp -r acme.sh acmetest/
     - uses: vmactions/solaris-vm@v1
       with:
         debug-on-error: ${{ vars.DEBUG_ON_ERROR }}
+        cache-after-prepare: true
         envs: 'TEST_DNS TestingDomain TEST_DNS_NO_WILDCARD TEST_DNS_NO_SUBDOMAIN TEST_DNS_SLEEP CASE TEST_LOCAL DEBUG http_proxy https_proxy HTTPS_INSECURE TokenName1 TokenName2 TokenName3 TokenName4 TokenName5 ${{ secrets.TokenName1}} ${{ secrets.TokenName2}} ${{ secrets.TokenName3}} ${{ secrets.TokenName4}} ${{ secrets.TokenName5}}'
         sync: nfs
         prepare: |
@@ -570,12 +642,13 @@ jobs:
       TokenName4: ${{ secrets.TokenName4}}
       TokenName5: ${{ secrets.TokenName5}}
     steps:
-    - uses: actions/checkout@v6
+    - uses: actions/checkout@v7
     - name: Clone acmetest
       run: cd .. && git clone --depth=1 https://github.com/acmesh-official/acmetest.git  && cp -r acme.sh acmetest/
     - uses: vmactions/omnios-vm@v1
       with:
         debug-on-error: ${{ vars.DEBUG_ON_ERROR }}
+        cache-after-prepare: true
         envs: 'TEST_DNS TestingDomain TEST_DNS_NO_WILDCARD TEST_DNS_NO_SUBDOMAIN TEST_DNS_SLEEP CASE TEST_LOCAL DEBUG http_proxy https_proxy HTTPS_INSECURE TokenName1 TokenName2 TokenName3 TokenName4 TokenName5 ${{ secrets.TokenName1}} ${{ secrets.TokenName2}} ${{ secrets.TokenName3}} ${{ secrets.TokenName4}} ${{ secrets.TokenName5}}'
         sync: nfs
         prepare: pkg install socat
@@ -626,12 +699,13 @@ jobs:
       TokenName4: ${{ secrets.TokenName4}}
       TokenName5: ${{ secrets.TokenName5}}
     steps:
-    - uses: actions/checkout@v6
+    - uses: actions/checkout@v7
     - name: Clone acmetest
       run: cd .. && git clone --depth=1 https://github.com/acmesh-official/acmetest.git  && cp -r acme.sh acmetest/
     - uses: vmactions/openindiana-vm@v1
       with:
         debug-on-error: ${{ vars.DEBUG_ON_ERROR }}
+        cache-after-prepare: true
         envs: 'TEST_DNS TestingDomain TEST_DNS_NO_WILDCARD TEST_DNS_NO_SUBDOMAIN TEST_DNS_SLEEP CASE TEST_LOCAL DEBUG http_proxy https_proxy HTTPS_INSECURE TokenName1 TokenName2 TokenName3 TokenName4 TokenName5 ${{ secrets.TokenName1}} ${{ secrets.TokenName2}} ${{ secrets.TokenName3}} ${{ secrets.TokenName4}} ${{ secrets.TokenName5}}'
         sync: nfs
         prepare: pkg install socat
@@ -661,7 +735,7 @@ jobs:
 
 
         
-  Haiku:
+  Tribblix:
     runs-on: ubuntu-latest
     needs: OpenIndiana
     env:
@@ -675,26 +749,23 @@ jobs:
       DEBUG: ${{ secrets.DEBUG }}
       http_proxy: ${{ secrets.http_proxy }}
       https_proxy: ${{ secrets.https_proxy }}
-      HTTPS_INSECURE: 1 # always set to 1 to ignore https error, since OpenIndiana doesn't accept the expired ISRG X1 root
+      HTTPS_INSECURE: 1 # always set to 1 to ignore https error, since Tribblix doesn't accept the expired ISRG X1 root
       TokenName1: ${{ secrets.TokenName1}}
       TokenName2: ${{ secrets.TokenName2}}
       TokenName3: ${{ secrets.TokenName3}}
       TokenName4: ${{ secrets.TokenName4}}
       TokenName5: ${{ secrets.TokenName5}}
     steps:
-    - uses: actions/checkout@v6
+    - uses: actions/checkout@v7
     - name: Clone acmetest
       run: cd .. && git clone --depth=1 https://github.com/acmesh-official/acmetest.git  && cp -r acme.sh acmetest/
-    - uses: vmactions/haiku-vm@v1
+    - uses: vmactions/tribblix-vm@v1
       with:
         debug-on-error: ${{ vars.DEBUG_ON_ERROR }}
+        cache-after-prepare: true
         envs: 'TEST_DNS TestingDomain TEST_DNS_NO_WILDCARD TEST_DNS_NO_SUBDOMAIN TEST_DNS_SLEEP CASE TEST_LOCAL DEBUG http_proxy https_proxy HTTPS_INSECURE TokenName1 TokenName2 TokenName3 TokenName4 TokenName5 ${{ secrets.TokenName1}} ${{ secrets.TokenName2}} ${{ secrets.TokenName3}} ${{ secrets.TokenName4}} ${{ secrets.TokenName5}}'
-        sync: rsync
-        copyback: false
-        prepare: |
-          mkdir -p /boot/home/.cache
-          pkgman install -y cronie
-          
+        sync: nfs
+        prepare: zap install socat
         run: |
           if [ "${{ secrets.TokenName1}}" ] ; then
             export ${{ secrets.TokenName1}}="${{ secrets.TokenValue1}}"
@@ -721,3 +792,297 @@ jobs:
 
 
 
+  Haiku:
+    runs-on: ubuntu-latest
+    needs: Tribblix
+    env:
+      TEST_DNS : ${{ secrets.TEST_DNS }}
+      TestingDomain: ${{ secrets.TestingDomain }}
+      TEST_DNS_NO_WILDCARD: ${{ secrets.TEST_DNS_NO_WILDCARD }}
+      TEST_DNS_NO_SUBDOMAIN: ${{ secrets.TEST_DNS_NO_SUBDOMAIN }}
+      TEST_DNS_SLEEP: ${{ secrets.TEST_DNS_SLEEP }}
+      CASE: le_test_dnsapi
+      TEST_LOCAL: 1
+      DEBUG: ${{ secrets.DEBUG }}
+      http_proxy: ${{ secrets.http_proxy }}
+      https_proxy: ${{ secrets.https_proxy }}
+      HTTPS_INSECURE: 1 # always set to 1 to ignore https error, since OpenIndiana doesn't accept the expired ISRG X1 root
+      TokenName1: ${{ secrets.TokenName1}}
+      TokenName2: ${{ secrets.TokenName2}}
+      TokenName3: ${{ secrets.TokenName3}}
+      TokenName4: ${{ secrets.TokenName4}}
+      TokenName5: ${{ secrets.TokenName5}}
+    steps:
+    - uses: actions/checkout@v7
+    - name: Clone acmetest
+      run: cd .. && git clone --depth=1 https://github.com/acmesh-official/acmetest.git  && cp -r acme.sh acmetest/
+    - uses: vmactions/haiku-vm@v1
+      with:
+        debug-on-error: ${{ vars.DEBUG_ON_ERROR }}
+        cache-after-prepare: true
+        envs: 'TEST_DNS TestingDomain TEST_DNS_NO_WILDCARD TEST_DNS_NO_SUBDOMAIN TEST_DNS_SLEEP CASE TEST_LOCAL DEBUG http_proxy https_proxy HTTPS_INSECURE TokenName1 TokenName2 TokenName3 TokenName4 TokenName5 ${{ secrets.TokenName1}} ${{ secrets.TokenName2}} ${{ secrets.TokenName3}} ${{ secrets.TokenName4}} ${{ secrets.TokenName5}}'
+        sync: rsync
+        copyback: false
+        prepare: |
+          mkdir -p /boot/home/.cache
+          pkgman install -y cronie
+
+        run: |
+          if [ "${{ secrets.TokenName1}}" ] ; then
+            export ${{ secrets.TokenName1}}="${{ secrets.TokenValue1}}"
+          fi
+          if [ "${{ secrets.TokenName2}}" ] ; then
+            export ${{ secrets.TokenName2}}="${{ secrets.TokenValue2}}"
+          fi
+          if [ "${{ secrets.TokenName3}}" ] ; then
+            export ${{ secrets.TokenName3}}="${{ secrets.TokenValue3}}"
+          fi
+          if [ "${{ secrets.TokenName4}}" ] ; then
+            export ${{ secrets.TokenName4}}="${{ secrets.TokenValue4}}"
+          fi
+          if [ "${{ secrets.TokenName5}}" ] ; then
+            export ${{ secrets.TokenName5}}="${{ secrets.TokenValue5}}"
+          fi
+          cd ../acmetest
+          ./letest.sh
+    - name: DebugOnError
+      if: ${{ failure() }}
+      run: |
+        echo "See how to debug in VM:"
+        echo "https://github.com/acmesh-official/acme.sh/wiki/debug-in-VM"
+
+
+
+  Hurd:
+    runs-on: ubuntu-latest
+    needs: Haiku
+    env:
+      TEST_DNS : ${{ secrets.TEST_DNS }}
+      TestingDomain: ${{ secrets.TestingDomain }}
+      TEST_DNS_NO_WILDCARD: ${{ secrets.TEST_DNS_NO_WILDCARD }}
+      TEST_DNS_NO_SUBDOMAIN: ${{ secrets.TEST_DNS_NO_SUBDOMAIN }}
+      TEST_DNS_SLEEP: ${{ secrets.TEST_DNS_SLEEP }}
+      CASE: le_test_dnsapi
+      TEST_LOCAL: 1
+      DEBUG: ${{ secrets.DEBUG }}
+      http_proxy: ${{ secrets.http_proxy }}
+      https_proxy: ${{ secrets.https_proxy }}
+      HTTPS_INSECURE: 1 # always set to 1 to ignore https error
+      TokenName1: ${{ secrets.TokenName1}}
+      TokenName2: ${{ secrets.TokenName2}}
+      TokenName3: ${{ secrets.TokenName3}}
+      TokenName4: ${{ secrets.TokenName4}}
+      TokenName5: ${{ secrets.TokenName5}}
+    steps:
+    - uses: actions/checkout@v7
+    - name: Clone acmetest
+      run: cd .. && git clone --depth=1 https://github.com/acmesh-official/acmetest.git  && cp -r acme.sh acmetest/
+    - uses: vmactions/hurd-vm@v1
+      with:
+        debug-on-error: ${{ vars.DEBUG_ON_ERROR }}
+        cache-after-prepare: true
+        envs: 'TEST_DNS TestingDomain TEST_DNS_NO_WILDCARD TEST_DNS_NO_SUBDOMAIN TEST_DNS_SLEEP CASE TEST_LOCAL DEBUG http_proxy https_proxy HTTPS_INSECURE TokenName1 TokenName2 TokenName3 TokenName4 TokenName5 ${{ secrets.TokenName1}} ${{ secrets.TokenName2}} ${{ secrets.TokenName3}} ${{ secrets.TokenName4}} ${{ secrets.TokenName5}}'
+        sync: rsync
+        copyback: false
+        usesh: true
+        prepare: |
+          apt-get update -y
+          apt-get install -y curl cron
+        run: |
+          if [ "${{ secrets.TokenName1}}" ] ; then
+            export ${{ secrets.TokenName1}}="${{ secrets.TokenValue1}}"
+          fi
+          if [ "${{ secrets.TokenName2}}" ] ; then
+            export ${{ secrets.TokenName2}}="${{ secrets.TokenValue2}}"
+          fi
+          if [ "${{ secrets.TokenName3}}" ] ; then
+            export ${{ secrets.TokenName3}}="${{ secrets.TokenValue3}}"
+          fi
+          if [ "${{ secrets.TokenName4}}" ] ; then
+            export ${{ secrets.TokenName4}}="${{ secrets.TokenValue4}}"
+          fi
+          if [ "${{ secrets.TokenName5}}" ] ; then
+            export ${{ secrets.TokenName5}}="${{ secrets.TokenValue5}}"
+          fi
+          cd ../acmetest
+          ./letest.sh
+    - name: DebugOnError
+      if: ${{ failure() }}
+      run: |
+        echo "See how to debug in VM:"
+        echo "https://github.com/acmesh-official/acme.sh/wiki/debug-in-VM"
+
+
+
+  OpenEuler:
+    runs-on: ubuntu-latest
+    needs: Hurd
+    env:
+      TEST_DNS : ${{ secrets.TEST_DNS }}
+      TestingDomain: ${{ secrets.TestingDomain }}
+      TEST_DNS_NO_WILDCARD: ${{ secrets.TEST_DNS_NO_WILDCARD }}
+      TEST_DNS_NO_SUBDOMAIN: ${{ secrets.TEST_DNS_NO_SUBDOMAIN }}
+      TEST_DNS_SLEEP: ${{ secrets.TEST_DNS_SLEEP }}
+      CASE: le_test_dnsapi
+      TEST_LOCAL: 1
+      DEBUG: ${{ secrets.DEBUG }}
+      http_proxy: ${{ secrets.http_proxy }}
+      https_proxy: ${{ secrets.https_proxy }}
+      HTTPS_INSECURE: 1 # always set to 1 to ignore https error
+      TokenName1: ${{ secrets.TokenName1}}
+      TokenName2: ${{ secrets.TokenName2}}
+      TokenName3: ${{ secrets.TokenName3}}
+      TokenName4: ${{ secrets.TokenName4}}
+      TokenName5: ${{ secrets.TokenName5}}
+    steps:
+    - uses: actions/checkout@v7
+    - name: Clone acmetest
+      run: cd .. && git clone --depth=1 https://github.com/acmesh-official/acmetest.git  && cp -r acme.sh acmetest/
+    - uses: vmactions/openeuler-vm@v1
+      with:
+        debug-on-error: ${{ vars.DEBUG_ON_ERROR }}
+        cache-after-prepare: true
+        envs: 'TEST_DNS TestingDomain TEST_DNS_NO_WILDCARD TEST_DNS_NO_SUBDOMAIN TEST_DNS_SLEEP CASE TEST_LOCAL DEBUG http_proxy https_proxy HTTPS_INSECURE TokenName1 TokenName2 TokenName3 TokenName4 TokenName5 ${{ secrets.TokenName1}} ${{ secrets.TokenName2}} ${{ secrets.TokenName3}} ${{ secrets.TokenName4}} ${{ secrets.TokenName5}}'
+        sync: rsync
+        copyback: false
+        usesh: true
+        prepare: dnf install -y curl socat cronie tar gzip
+        run: |
+          if [ "${{ secrets.TokenName1}}" ] ; then
+            export ${{ secrets.TokenName1}}="${{ secrets.TokenValue1}}"
+          fi
+          if [ "${{ secrets.TokenName2}}" ] ; then
+            export ${{ secrets.TokenName2}}="${{ secrets.TokenValue2}}"
+          fi
+          if [ "${{ secrets.TokenName3}}" ] ; then
+            export ${{ secrets.TokenName3}}="${{ secrets.TokenValue3}}"
+          fi
+          if [ "${{ secrets.TokenName4}}" ] ; then
+            export ${{ secrets.TokenName4}}="${{ secrets.TokenValue4}}"
+          fi
+          if [ "${{ secrets.TokenName5}}" ] ; then
+            export ${{ secrets.TokenName5}}="${{ secrets.TokenValue5}}"
+          fi
+          cd ../acmetest
+          ./letest.sh
+    - name: DebugOnError
+      if: ${{ failure() }}
+      run: |
+        echo "See how to debug in VM:"
+        echo "https://github.com/acmesh-official/acme.sh/wiki/debug-in-VM"
+
+
+
+  HardenedBSD:
+    runs-on: ubuntu-latest
+    needs: OpenEuler
+    env:
+      TEST_DNS : ${{ secrets.TEST_DNS }}
+      TestingDomain: ${{ secrets.TestingDomain }}
+      TEST_DNS_NO_WILDCARD: ${{ secrets.TEST_DNS_NO_WILDCARD }}
+      TEST_DNS_NO_SUBDOMAIN: ${{ secrets.TEST_DNS_NO_SUBDOMAIN }}
+      TEST_DNS_SLEEP: ${{ secrets.TEST_DNS_SLEEP }}
+      CASE: le_test_dnsapi
+      TEST_LOCAL: 1
+      DEBUG: ${{ secrets.DEBUG }}
+      http_proxy: ${{ secrets.http_proxy }}
+      https_proxy: ${{ secrets.https_proxy }}
+      TokenName1: ${{ secrets.TokenName1}}
+      TokenName2: ${{ secrets.TokenName2}}
+      TokenName3: ${{ secrets.TokenName3}}
+      TokenName4: ${{ secrets.TokenName4}}
+      TokenName5: ${{ secrets.TokenName5}}
+    steps:
+    - uses: actions/checkout@v7
+    - name: Clone acmetest
+      run: cd .. && git clone --depth=1 https://github.com/acmesh-official/acmetest.git  && cp -r acme.sh acmetest/
+    - uses: vmactions/hardenedbsd-vm@v1
+      with:
+        debug-on-error: ${{ vars.DEBUG_ON_ERROR }}
+        cache-after-prepare: true
+        envs: 'TEST_DNS TestingDomain TEST_DNS_NO_WILDCARD TEST_DNS_NO_SUBDOMAIN TEST_DNS_SLEEP CASE TEST_LOCAL DEBUG http_proxy https_proxy TokenName1 TokenName2 TokenName3 TokenName4 TokenName5 ${{ secrets.TokenName1}} ${{ secrets.TokenName2}} ${{ secrets.TokenName3}} ${{ secrets.TokenName4}} ${{ secrets.TokenName5}}'
+        prepare: pkg install -y socat curl
+        usesh: true
+        sync: nfs
+        run: |
+          if [ "${{ secrets.TokenName1}}" ] ; then
+            export ${{ secrets.TokenName1}}="${{ secrets.TokenValue1}}"
+          fi
+          if [ "${{ secrets.TokenName2}}" ] ; then
+            export ${{ secrets.TokenName2}}="${{ secrets.TokenValue2}}"
+          fi
+          if [ "${{ secrets.TokenName3}}" ] ; then
+            export ${{ secrets.TokenName3}}="${{ secrets.TokenValue3}}"
+          fi
+          if [ "${{ secrets.TokenName4}}" ] ; then
+            export ${{ secrets.TokenName4}}="${{ secrets.TokenValue4}}"
+          fi
+          if [ "${{ secrets.TokenName5}}" ] ; then
+            export ${{ secrets.TokenName5}}="${{ secrets.TokenValue5}}"
+          fi
+          cd ../acmetest
+          ./letest.sh
+    - name: DebugOnError
+      if: ${{ failure() }}
+      run: |
+        echo "See how to debug in VM:"
+        echo "https://github.com/acmesh-official/acme.sh/wiki/debug-in-VM"
+
+
+
+  OPNsense:
+    runs-on: ubuntu-latest
+    needs: HardenedBSD
+    env:
+      TEST_DNS : ${{ secrets.TEST_DNS }}
+      TestingDomain: ${{ secrets.TestingDomain }}
+      TEST_DNS_NO_WILDCARD: ${{ secrets.TEST_DNS_NO_WILDCARD }}
+      TEST_DNS_NO_SUBDOMAIN: ${{ secrets.TEST_DNS_NO_SUBDOMAIN }}
+      TEST_DNS_SLEEP: ${{ secrets.TEST_DNS_SLEEP }}
+      CASE: le_test_dnsapi
+      TEST_LOCAL: 1
+      DEBUG: ${{ secrets.DEBUG }}
+      http_proxy: ${{ secrets.http_proxy }}
+      https_proxy: ${{ secrets.https_proxy }}
+      TokenName1: ${{ secrets.TokenName1}}
+      TokenName2: ${{ secrets.TokenName2}}
+      TokenName3: ${{ secrets.TokenName3}}
+      TokenName4: ${{ secrets.TokenName4}}
+      TokenName5: ${{ secrets.TokenName5}}
+    steps:
+    - uses: actions/checkout@v7
+    - name: Clone acmetest
+      run: cd .. && git clone --depth=1 https://github.com/acmesh-official/acmetest.git  && cp -r acme.sh acmetest/
+    - uses: vmactions/opnsense-vm@v1
+      with:
+        debug-on-error: ${{ vars.DEBUG_ON_ERROR }}
+        cache-after-prepare: true
+        envs: 'TEST_DNS TestingDomain TEST_DNS_NO_WILDCARD TEST_DNS_NO_SUBDOMAIN TEST_DNS_SLEEP CASE TEST_LOCAL DEBUG http_proxy https_proxy TokenName1 TokenName2 TokenName3 TokenName4 TokenName5 ${{ secrets.TokenName1}} ${{ secrets.TokenName2}} ${{ secrets.TokenName3}} ${{ secrets.TokenName4}} ${{ secrets.TokenName5}}'
+        #The dns-01 cases need no inbound port, so the appliance's web GUI can
+        #keep the 80 port here, unlike the standalone workflow.
+        prepare: pkg install -y socat curl
+        usesh: true
+        sync: nfs
+        run: |
+          if [ "${{ secrets.TokenName1}}" ] ; then
+            export ${{ secrets.TokenName1}}="${{ secrets.TokenValue1}}"
+          fi
+          if [ "${{ secrets.TokenName2}}" ] ; then
+            export ${{ secrets.TokenName2}}="${{ secrets.TokenValue2}}"
+          fi
+          if [ "${{ secrets.TokenName3}}" ] ; then
+            export ${{ secrets.TokenName3}}="${{ secrets.TokenValue3}}"
+          fi
+          if [ "${{ secrets.TokenName4}}" ] ; then
+            export ${{ secrets.TokenName4}}="${{ secrets.TokenValue4}}"
+          fi
+          if [ "${{ secrets.TokenName5}}" ] ; then
+            export ${{ secrets.TokenName5}}="${{ secrets.TokenValue5}}"
+          fi
+          cd ../acmetest
+          ./letest.sh
+    - name: DebugOnError
+      if: ${{ failure() }}
+      run: |
+        echo "See how to debug in VM:"
+        echo "https://github.com/acmesh-official/acme.sh/wiki/debug-in-VM"

.github/workflows/DragonFlyBSD.yml

@@ -58,6 +58,7 @@ jobs:
     - uses: vmactions/dragonflybsd-vm@v1
       with:
         debug-on-error: ${{ vars.DEBUG_ON_ERROR }}
+        cache-after-prepare: true
         envs: 'TEST_LOCAL TestingDomain TEST_ACME_Server CA_ECDSA CA CA_EMAIL TEST_PREFERRED_CHAIN ACME_USE_WGET'
         nat: |
           "8080": "80"

.github/workflows/FreeBSD.yml

@@ -64,6 +64,7 @@ jobs:
     - uses: vmactions/freebsd-vm@v1
       with:
         debug-on-error: ${{ vars.DEBUG_ON_ERROR }}
+        cache-after-prepare: true
         envs: 'TEST_LOCAL TestingDomain TEST_ACME_Server CA_ECDSA CA CA_EMAIL TEST_PREFERRED_CHAIN ACME_USE_WGET'
         nat: |
           "8080": "80"

.github/workflows/GhostBSD.yml

@@ -0,0 +1,83 @@
+name: GhostBSD
+on:
+  push:
+    branches:
+      - '*'
+    paths:
+      - '*.sh'
+      - '.github/workflows/GhostBSD.yml'
+
+  pull_request:
+    branches:
+      - dev
+    paths:
+      - '*.sh'
+      - '.github/workflows/GhostBSD.yml'
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+
+
+
+jobs:
+  GhostBSD:
+    strategy:
+      matrix:
+        include:
+         - TEST_ACME_Server: "LetsEncrypt.org_test"
+           CA_ECDSA: ""
+           CA: ""
+           CA_EMAIL: ""
+           TEST_PREFERRED_CHAIN: (STAGING)
+         - TEST_ACME_Server: "LetsEncrypt.org_test"
+           CA_ECDSA: ""
+           CA: ""
+           CA_EMAIL: ""
+           TEST_PREFERRED_CHAIN: (STAGING)
+           ACME_USE_WGET: 1
+         #- TEST_ACME_Server: "ZeroSSL.com"
+         #  CA_ECDSA: "ZeroSSL ECC DV SSL CA 2"
+         #  CA: "ZeroSSL RSA DV SSL CA 2"
+         #  CA_EMAIL: "githubtest@acme.sh"
+         #  TEST_PREFERRED_CHAIN: ""
+    runs-on: ubuntu-latest
+    # GhostBSD VM frequently flakes on boot/ssh; don't let it fail the whole run
+    continue-on-error: true
+    env:
+      TEST_LOCAL: 1
+      TEST_ACME_Server: ${{ matrix.TEST_ACME_Server }}
+      CA_ECDSA: ${{ matrix.CA_ECDSA }}
+      CA: ${{ matrix.CA }}
+      CA_EMAIL: ${{ matrix.CA_EMAIL }}
+      TEST_PREFERRED_CHAIN: ${{ matrix.TEST_PREFERRED_CHAIN }}
+      ACME_USE_WGET: ${{ matrix.ACME_USE_WGET }}
+    steps:
+    - uses: actions/checkout@v6
+    - uses: anyvm-org/cf-tunnel@v0
+      id: tunnel
+      with:
+        protocol: http
+        port: 8080
+    - name: Set envs
+      run: echo "TestingDomain=${{steps.tunnel.outputs.server}}" >> $GITHUB_ENV
+    - name: Clone acmetest
+      run: cd .. && git clone --depth=1 https://github.com/acmesh-official/acmetest.git  && cp -r acme.sh acmetest/
+    - uses: vmactions/ghostbsd-vm@v1
+      with:
+        debug-on-error: ${{ vars.DEBUG_ON_ERROR }}
+        cache-after-prepare: true
+        envs: 'TEST_LOCAL TestingDomain TEST_ACME_Server CA_ECDSA CA CA_EMAIL TEST_PREFERRED_CHAIN ACME_USE_WGET'
+        nat: |
+          "8080": "80"
+        prepare: pkg install -y socat curl wget
+        usesh: true
+        sync: nfs
+        run: |
+          cd ../acmetest \
+          && ./letest.sh
+    - name: DebugOnError
+      if: ${{ failure() }}
+      run: |
+        echo "See how to debug in VM:"
+        echo "https://github.com/acmesh-official/acme.sh/wiki/debug-in-VM"

.github/workflows/Haiku.yml

@@ -65,6 +65,7 @@ jobs:
     - uses: vmactions/haiku-vm@v1
       with:
         debug-on-error: ${{ vars.DEBUG_ON_ERROR }}
+        cache-after-prepare: true
         envs: 'TEST_LOCAL TestingDomain TEST_ACME_Server CA_ECDSA CA CA_EMAIL TEST_PREFERRED_CHAIN ACME_USE_WGET'
         nat: |
           "8080": "80"

.github/workflows/HardenedBSD.yml

@@ -0,0 +1,76 @@
+name: HardenedBSD
+on:
+  push:
+    branches:
+      - '*'
+    paths:
+      - '*.sh'
+      - '.github/workflows/HardenedBSD.yml'
+
+  pull_request:
+    branches:
+      - dev
+    paths:
+      - '*.sh'
+      - '.github/workflows/HardenedBSD.yml'
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+
+
+
+jobs:
+  HardenedBSD:
+    strategy:
+      matrix:
+        include:
+         - TEST_ACME_Server: "LetsEncrypt.org_test"
+           CA_ECDSA: ""
+           CA: ""
+           CA_EMAIL: ""
+           TEST_PREFERRED_CHAIN: (STAGING)
+         - TEST_ACME_Server: "LetsEncrypt.org_test"
+           CA_ECDSA: ""
+           CA: ""
+           CA_EMAIL: ""
+           TEST_PREFERRED_CHAIN: (STAGING)
+           ACME_USE_WGET: 1
+    runs-on: ubuntu-latest
+    env:
+      TEST_LOCAL: 1
+      TEST_ACME_Server: ${{ matrix.TEST_ACME_Server }}
+      CA_ECDSA: ${{ matrix.CA_ECDSA }}
+      CA: ${{ matrix.CA }}
+      CA_EMAIL: ${{ matrix.CA_EMAIL }}
+      TEST_PREFERRED_CHAIN: ${{ matrix.TEST_PREFERRED_CHAIN }}
+      ACME_USE_WGET: ${{ matrix.ACME_USE_WGET }}
+    steps:
+    - uses: actions/checkout@v7
+    - uses: anyvm-org/cf-tunnel@v0
+      id: tunnel
+      with:
+        protocol: http
+        port: 8080
+    - name: Set envs
+      run: echo "TestingDomain=${{steps.tunnel.outputs.server}}" >> $GITHUB_ENV
+    - name: Clone acmetest
+      run: cd .. && git clone --depth=1 https://github.com/acmesh-official/acmetest.git  && cp -r acme.sh acmetest/
+    - uses: vmactions/hardenedbsd-vm@v1
+      with:
+        debug-on-error: ${{ vars.DEBUG_ON_ERROR }}
+        cache-after-prepare: true
+        envs: 'TEST_LOCAL TestingDomain TEST_ACME_Server CA_ECDSA CA CA_EMAIL TEST_PREFERRED_CHAIN ACME_USE_WGET'
+        nat: |
+          "8080": "80"
+        prepare: pkg install -y socat curl wget
+        usesh: true
+        sync: nfs
+        run: |
+          cd ../acmetest \
+          && ./letest.sh
+    - name: DebugOnError
+      if: ${{ failure() }}
+      run: |
+        echo "See how to debug in VM:"
+        echo "https://github.com/acmesh-official/acme.sh/wiki/debug-in-VM"

.github/workflows/Hurd.yml

@@ -0,0 +1,76 @@
+name: Hurd
+on:
+  push:
+    branches:
+      - '*'
+    paths:
+      - '*.sh'
+      - '.github/workflows/Hurd.yml'
+
+  pull_request:
+    branches:
+      - dev
+    paths:
+      - '*.sh'
+      - '.github/workflows/Hurd.yml'
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+
+
+
+jobs:
+  Hurd:
+    strategy:
+      matrix:
+        include:
+         - TEST_ACME_Server: "LetsEncrypt.org_test"
+           CA_ECDSA: ""
+           CA: ""
+           CA_EMAIL: ""
+           TEST_PREFERRED_CHAIN: (STAGING)
+    runs-on: ubuntu-latest
+    env:
+      TEST_LOCAL: 1
+      TEST_ACME_Server: ${{ matrix.TEST_ACME_Server }}
+      CA_ECDSA: ${{ matrix.CA_ECDSA }}
+      CA: ${{ matrix.CA }}
+      CA_EMAIL: ${{ matrix.CA_EMAIL }}
+      TEST_PREFERRED_CHAIN: ${{ matrix.TEST_PREFERRED_CHAIN }}
+    steps:
+    - uses: actions/checkout@v7
+    - uses: anyvm-org/cf-tunnel@v0
+      id: tunnel
+      with:
+        protocol: http
+        port: 8080
+    - name: Set envs
+      run: echo "TestingDomain=${{steps.tunnel.outputs.server}}" >> $GITHUB_ENV
+    - name: Clone acmetest
+      run: cd .. && git clone --depth=1 https://github.com/acmesh-official/acmetest.git  && cp -r acme.sh acmetest/
+    - uses: vmactions/hurd-vm@v1
+      with:
+        debug-on-error: ${{ vars.DEBUG_ON_ERROR }}
+        cache-after-prepare: true
+        envs: 'TEST_LOCAL TestingDomain TEST_ACME_Server CA_ECDSA CA CA_EMAIL TEST_PREFERRED_CHAIN'
+        nat: |
+          "8080": "80"
+        # Do NOT install socat: socat's SYSTEM: address is broken on GNU Hurd
+        # (the child shell output goes to socat's stdout instead of the socket,
+        # so clients get an empty reply). Without socat, acme.sh standalone
+        # mode falls back to its python3 server, which works on Hurd.
+        prepare: |
+          apt-get update -y
+          apt-get install -y curl cron
+        usesh: true
+        sync: rsync
+        copyback: false
+        run: |
+          cd ../acmetest \
+          && ./letest.sh
+    - name: DebugOnError
+      if: ${{ failure() }}
+      run: |
+        echo "See how to debug in VM:"
+        echo "https://github.com/acmesh-official/acme.sh/wiki/debug-in-VM"

.github/workflows/MidnightBSD.yml

@@ -58,6 +58,7 @@ jobs:
     - uses: vmactions/midnightbsd-vm@v1
       with:
         debug-on-error: ${{ vars.DEBUG_ON_ERROR }}
+        cache-after-prepare: true
         envs: 'TEST_LOCAL TestingDomain TEST_ACME_Server CA_ECDSA CA CA_EMAIL TEST_PREFERRED_CHAIN ACME_USE_WGET'
         nat: |
           "8080": "80"

.github/workflows/NetBSD.yml

@@ -58,6 +58,7 @@ jobs:
     - uses: vmactions/netbsd-vm@v1
       with:
         debug-on-error: ${{ vars.DEBUG_ON_ERROR }}
+        cache-after-prepare: true
         envs: 'TEST_LOCAL TestingDomain TEST_ACME_Server CA_ECDSA CA CA_EMAIL TEST_PREFERRED_CHAIN ACME_USE_WGET'
         nat: |
           "8080": "80"

.github/workflows/Nginx.yml

@@ -0,0 +1,66 @@
+name: Nginx
+on:
+  push:
+    paths:
+      - '*.sh'
+      - '.github/workflows/Nginx.yml'
+  pull_request:
+    branches:
+      - dev
+    paths:
+      - '*.sh'
+      - '.github/workflows/Nginx.yml'
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+
+jobs:
+  Nginx:
+    runs-on: ubuntu-latest
+    env:
+      TestingDomain: example.com
+      TEST_ACME_Server: https://localhost:14000/dir
+      HTTPS_INSECURE: 1
+      TEST_LOCAL: 1
+      TEST_CA: "Pebble Intermediate CA"
+      TEST_NGINX: 1
+      CASE: le_test_nginx
+    steps:
+    - uses: actions/checkout@v6
+    - name: Install tools
+      run: sudo apt-get install -y socat nginx
+    - name: Run Pebble
+      run: cd .. && curl https://raw.githubusercontent.com/letsencrypt/pebble/master/docker-compose.yml >docker-compose.yml && docker compose up -d
+    - name: Set up Pebble
+      run: curl --request POST --data '{"ip":"10.30.50.1"}' http://localhost:8055/set-default-ipv4
+    - name: Set up nginx
+      # a backend on 8081 plus a site with an aaPanel/BT style
+      # "location ^~ /" proxy block that shadows plain regex locations
+      # (regression for #6125); the site listens on 5002, which is the
+      # HTTP-01 validation port in Pebble's default config
+      run: |
+        sudo tee /etc/nginx/sites-available/default >/dev/null <<'EOF'
+        server {
+          listen 127.0.0.1:8081;
+          location / {
+            default_type text/plain;
+            return 200 "backend";
+          }
+        }
+        server {
+          listen 5002 default_server;
+          server_name example.com;
+          location ^~ / {
+            proxy_pass http://127.0.0.1:8081;
+            proxy_set_header Host $http_host;
+          }
+        }
+        EOF
+        sudo nginx -t
+        sudo systemctl restart nginx
+        curl -s -H "Host: example.com" http://127.0.0.1:5002/ | grep backend
+    - name: Clone acmetest
+      run: cd .. && git clone --depth=1 https://github.com/acmesh-official/acmetest.git  && cp -r acme.sh acmetest/
+    - name: Run acmetest
+      run: cd ../acmetest && sudo --preserve-env ./letest.sh

.github/workflows/OPNsense.yml

@@ -0,0 +1,86 @@
+name: OPNsense
+on:
+  push:
+    branches:
+      - '*'
+    paths:
+      - '*.sh'
+      - '.github/workflows/OPNsense.yml'
+
+  pull_request:
+    branches:
+      - dev
+    paths:
+      - '*.sh'
+      - '.github/workflows/OPNsense.yml'
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+
+
+
+jobs:
+  OPNsense:
+    strategy:
+      matrix:
+        include:
+         - TEST_ACME_Server: "LetsEncrypt.org_test"
+           CA_ECDSA: ""
+           CA: ""
+           CA_EMAIL: ""
+           TEST_PREFERRED_CHAIN: (STAGING)
+         - TEST_ACME_Server: "LetsEncrypt.org_test"
+           CA_ECDSA: ""
+           CA: ""
+           CA_EMAIL: ""
+           TEST_PREFERRED_CHAIN: (STAGING)
+           ACME_USE_WGET: 1
+    runs-on: ubuntu-latest
+    env:
+      TEST_LOCAL: 1
+      TEST_ACME_Server: ${{ matrix.TEST_ACME_Server }}
+      CA_ECDSA: ${{ matrix.CA_ECDSA }}
+      CA: ${{ matrix.CA }}
+      CA_EMAIL: ${{ matrix.CA_EMAIL }}
+      TEST_PREFERRED_CHAIN: ${{ matrix.TEST_PREFERRED_CHAIN }}
+      ACME_USE_WGET: ${{ matrix.ACME_USE_WGET }}
+    steps:
+    - uses: actions/checkout@v7
+    - uses: anyvm-org/cf-tunnel@v0
+      id: tunnel
+      with:
+        protocol: http
+        port: 8080
+    - name: Set envs
+      run: echo "TestingDomain=${{steps.tunnel.outputs.server}}" >> $GITHUB_ENV
+    - name: Clone acmetest
+      run: cd .. && git clone --depth=1 https://github.com/acmesh-official/acmetest.git  && cp -r acme.sh acmetest/
+    - uses: vmactions/opnsense-vm@v1
+      with:
+        debug-on-error: ${{ vars.DEBUG_ON_ERROR }}
+        cache-after-prepare: true
+        envs: 'TEST_LOCAL TestingDomain TEST_ACME_Server CA_ECDSA CA CA_EMAIL TEST_PREFERRED_CHAIN ACME_USE_WGET'
+        nat: |
+          "8080": "80"
+        prepare: pkg install -y socat curl wget
+        usesh: true
+        sync: nfs
+        run: |
+          #OPNsense is a firewall appliance whose web GUI holds the 80 port,
+          #where every --standalone case listens. configd has no "stop"
+          #action for it and the rc script cannot stop it either, so kill it.
+          #This belongs here and not in prepare: prepare runs before the
+          #cache-after-prepare reboot, which would bring the GUI back. And do
+          #NOT free the port by disabling the GUI's http redirect in
+          #config.xml: pf's automatic pass rule for the 80 port is generated
+          #from the web GUI settings, so dropping the redirect also drops the
+          #rule on the next boot, and the inbound challenge is filtered.
+          pkill lighttpd || true
+          cd ../acmetest \
+          && ./letest.sh
+    - name: DebugOnError
+      if: ${{ failure() }}
+      run: |
+        echo "See how to debug in VM:"
+        echo "https://github.com/acmesh-official/acme.sh/wiki/debug-in-VM"

.github/workflows/Omnios.yml

@@ -64,6 +64,7 @@ jobs:
     - uses: vmactions/omnios-vm@v1
       with:
         debug-on-error: ${{ vars.DEBUG_ON_ERROR }}
+        cache-after-prepare: true
         envs: 'TEST_LOCAL TestingDomain TEST_ACME_Server CA_ECDSA CA CA_EMAIL TEST_PREFERRED_CHAIN ACME_USE_WGET'
         nat: |
           "8080": "80"

.github/workflows/OpenBSD.yml

@@ -64,6 +64,7 @@ jobs:
     - uses: vmactions/openbsd-vm@v1
       with:
         debug-on-error: ${{ vars.DEBUG_ON_ERROR }}
+        cache-after-prepare: true
         envs: 'TEST_LOCAL TestingDomain TEST_ACME_Server CA_ECDSA CA CA_EMAIL TEST_PREFERRED_CHAIN ACME_USE_WGET'
         nat: |
           "8080": "80"

.github/workflows/OpenEuler.yml

@@ -0,0 +1,78 @@
+name: OpenEuler
+on:
+  push:
+    branches:
+      - '*'
+    paths:
+      - '*.sh'
+      - '.github/workflows/OpenEuler.yml'
+
+  pull_request:
+    branches:
+      - dev
+    paths:
+      - '*.sh'
+      - '.github/workflows/OpenEuler.yml'
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+
+
+
+jobs:
+  OpenEuler:
+    strategy:
+      matrix:
+        include:
+         - TEST_ACME_Server: "LetsEncrypt.org_test"
+           CA_ECDSA: ""
+           CA: ""
+           CA_EMAIL: ""
+           TEST_PREFERRED_CHAIN: (STAGING)
+    runs-on: ubuntu-latest
+    env:
+      TEST_LOCAL: 1
+      TEST_ACME_Server: ${{ matrix.TEST_ACME_Server }}
+      CA_ECDSA: ${{ matrix.CA_ECDSA }}
+      CA: ${{ matrix.CA }}
+      CA_EMAIL: ${{ matrix.CA_EMAIL }}
+      TEST_PREFERRED_CHAIN: ${{ matrix.TEST_PREFERRED_CHAIN }}
+    steps:
+    - uses: actions/checkout@v7
+    - uses: anyvm-org/cf-tunnel@v0
+      id: tunnel
+      with:
+        protocol: http
+        port: 8080
+    - name: Set envs
+      run: echo "TestingDomain=${{steps.tunnel.outputs.server}}" >> $GITHUB_ENV
+    - name: Clone acmetest
+      run: cd .. && git clone --depth=1 https://github.com/acmesh-official/acmetest.git  && cp -r acme.sh acmetest/
+    - uses: vmactions/openeuler-vm@v1
+      with:
+        debug-on-error: ${{ vars.DEBUG_ON_ERROR }}
+        cache-after-prepare: true
+        envs: 'TEST_LOCAL TestingDomain TEST_ACME_Server CA_ECDSA CA CA_EMAIL TEST_PREFERRED_CHAIN'
+        nat: |
+          "8080": "80"
+        prepare: |
+          # openEuler ships every repo with both a baseurl and a metalink.
+          # The metalink mirror pool is split-brain (dl-cdn.openeuler.openatom.cn
+          # froze at the 2026-08-20 snapshot while repo.openeuler.org moved on),
+          # so dnf takes repomd.xml from the stale mirror and then 404s fetching
+          # the checksummed metadata it names from the fresh ones. Keep only the
+          # vendor baseurl, which is self-consistent.
+          sed -i '/^metalink=/d' /etc/yum.repos.d/*.repo
+          dnf install -y curl socat cronie tar gzip
+        usesh: true
+        sync: rsync
+        copyback: false
+        run: |
+          cd ../acmetest \
+          && ./letest.sh
+    - name: DebugOnError
+      if: ${{ failure() }}
+      run: |
+        echo "See how to debug in VM:"
+        echo "https://github.com/acmesh-official/acme.sh/wiki/debug-in-VM"

.github/workflows/OpenIndiana.yml

@@ -64,6 +64,7 @@ jobs:
     - uses: vmactions/openindiana-vm@v1
       with:
         debug-on-error: ${{ vars.DEBUG_ON_ERROR }}
+        cache-after-prepare: true
         envs: 'TEST_LOCAL TestingDomain TEST_ACME_Server CA_ECDSA CA CA_EMAIL TEST_PREFERRED_CHAIN ACME_USE_WGET'
         nat: |
           "8080": "80"

.github/workflows/PebbleStrict.yml

@@ -31,13 +31,21 @@ jobs:
       Le_HTTPPort: 5002
       TEST_LOCAL: 1
       TEST_CA: "Pebble Intermediate CA"
+      TEST_DNS_MANUAL: 1
 
     steps:
     - uses: actions/checkout@v6
     - name: Install tools
       run: sudo apt-get install -y socat
     - name: Run Pebble
-      run: cd .. && curl https://raw.githubusercontent.com/letsencrypt/pebble/master/docker-compose.yml >docker-compose.yml && docker compose up -d
+      run: |
+        cd ..
+        curl https://raw.githubusercontent.com/letsencrypt/pebble/master/docker-compose.yml >docker-compose.yml
+        # Pebble reuses a valid authorization in a new order 50% of the time
+        # by default, which makes the dns manual mode case a coin flip: a
+        # reused authorization leaves nothing for the TXT record to answer.
+        printf 'services:\n  pebble:\n    environment:\n      PEBBLE_AUTHZREUSE: "0"\n' >docker-compose.override.yml
+        docker compose up -d
     - name: Set up Pebble
       run: curl --request POST --data '{"ip":"10.30.50.1"}' http://localhost:8055/set-default-ipv4
     - name: Clone acmetest

.github/workflows/Solaris.yml

@@ -64,6 +64,7 @@ jobs:
     - uses: vmactions/solaris-vm@v1
       with:
         debug-on-error: ${{ vars.DEBUG_ON_ERROR }}
+        cache-after-prepare: true
         envs: 'TEST_LOCAL TestingDomain TEST_ACME_Server CA_ECDSA CA CA_EMAIL TEST_PREFERRED_CHAIN ACME_USE_WGET'
         nat: |
           "8080": "80"

.github/workflows/Tribblix.yml

@@ -0,0 +1,80 @@
+name: Tribblix
+on:
+  push:
+    branches:
+      - '*'
+    paths:
+      - '*.sh'
+      - '.github/workflows/Tribblix.yml'
+
+  pull_request:
+    branches:
+      - dev
+    paths:
+      - '*.sh'
+      - '.github/workflows/Tribblix.yml'
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+
+
+
+jobs:
+  Tribblix:
+    strategy:
+      matrix:
+        include:
+         - TEST_ACME_Server: "LetsEncrypt.org_test"
+           CA_ECDSA: ""
+           CA: ""
+           CA_EMAIL: ""
+           TEST_PREFERRED_CHAIN: (STAGING)
+         - TEST_ACME_Server: "LetsEncrypt.org_test"
+           CA_ECDSA: ""
+           CA: ""
+           CA_EMAIL: ""
+           TEST_PREFERRED_CHAIN: (STAGING)
+           ACME_USE_WGET: 1
+         #- TEST_ACME_Server: "ZeroSSL.com"
+         #  CA_ECDSA: "ZeroSSL ECC DV SSL CA 2"
+         #  CA: "ZeroSSL RSA DV SSL CA 2"
+         #  CA_EMAIL: "githubtest@acme.sh"
+         #  TEST_PREFERRED_CHAIN: ""
+    runs-on: ubuntu-latest
+    env:
+      TEST_LOCAL: 1
+      TEST_ACME_Server: ${{ matrix.TEST_ACME_Server }}
+      CA_ECDSA: ${{ matrix.CA_ECDSA }}
+      CA: ${{ matrix.CA }}
+      CA_EMAIL: ${{ matrix.CA_EMAIL }}
+      TEST_PREFERRED_CHAIN: ${{ matrix.TEST_PREFERRED_CHAIN }}
+      ACME_USE_WGET: ${{ matrix.ACME_USE_WGET }}
+    steps:
+    - uses: actions/checkout@v6
+    - uses: anyvm-org/cf-tunnel@v0
+      id: tunnel
+      with:
+        protocol: http
+        port: 8080
+    - name: Set envs
+      run: echo "TestingDomain=${{steps.tunnel.outputs.server}}" >> $GITHUB_ENV
+    - name: Clone acmetest
+      run: cd .. && git clone --depth=1 https://github.com/acmesh-official/acmetest.git  && cp -r acme.sh acmetest/
+    - uses: vmactions/tribblix-vm@v1
+      with:
+        debug-on-error: ${{ vars.DEBUG_ON_ERROR }}
+        cache-after-prepare: true
+        envs: 'TEST_LOCAL TestingDomain TEST_ACME_Server CA_ECDSA CA CA_EMAIL TEST_PREFERRED_CHAIN ACME_USE_WGET'
+        nat: |
+          "8080": "80"
+        prepare: zap install socat curl wget
+        sync: nfs
+        run: |
+          cd ../acmetest \
+          && ./letest.sh
+    - name: DebugOnError
+      if: ${{ failure() }}
+      run: |
+        echo "See how to debug in VM:"
+        echo "https://github.com/acmesh-official/acme.sh/wiki/debug-in-VM"

.github/workflows/blacklist-command.yml

@@ -0,0 +1,114 @@
+name: Blacklist Command
+
+# An issue titled "blacklist: <login-or-email>" opened by the maintainer
+# or a write-access member adds that identity to the Blacklist wiki page
+# (see wiki-guard.yml) and closes the issue. The wiki-monitor notification
+# embeds a prefilled link that opens such an issue in one click.
+
+on:
+  issues:
+    types: [opened]
+
+permissions:
+  contents: write
+  issues: write
+
+# Share the wiki-guard concurrency group so we never push to the wiki
+# at the same time as the guard.
+concurrency:
+  group: wiki-guard
+  cancel-in-progress: false
+
+jobs:
+  blacklist:
+    # Upstream only: forks have no <fork>.wiki repository to push to.
+    if: github.repository == 'acmesh-official/acme.sh' && startsWith(github.event.issue.title, 'blacklist:')
+    runs-on: ubuntu-latest
+    steps:
+      - name: Check authorization
+        id: auth
+        run: |
+          assoc="${{ github.event.issue.author_association }}"
+          case "$assoc" in
+            OWNER|MEMBER|COLLABORATOR)
+              echo "ok=true" >> "$GITHUB_OUTPUT"
+              ;;
+            *)
+              echo "issue author is not authorized ($assoc); ignoring"
+              echo "ok=false" >> "$GITHUB_OUTPUT"
+              ;;
+          esac
+
+      - name: Checkout wiki repository
+        if: steps.auth.outputs.ok == 'true'
+        uses: actions/checkout@v7
+        with:
+          repository: ${{ github.repository }}.wiki
+          path: wiki
+
+      - name: Add the identity to the blacklist page
+        if: steps.auth.outputs.ok == 'true'
+        id: add
+        env:
+          TITLE: ${{ github.event.issue.title }}
+        run: |
+          target="$(printf '%s' "$TITLE" \
+            | sed 's/^blacklist:[[:space:]]*//; s/^@//; s/[[:space:]].*$//' \
+            | tr 'A-Z' 'a-z')"
+          case "$target" in
+            ''|*[!a-z0-9._+@-]*)
+              echo "invalid target: '$target'"
+              echo "result=invalid" >> "$GITHUB_OUTPUT"
+              exit 0
+              ;;
+          esac
+          echo "target=$target" >> "$GITHUB_OUTPUT"
+          cd wiki
+          if [ ! -e Blacklist.md ]; then
+            echo "result=nopage" >> "$GITHUB_OUTPUT"
+            exit 0
+          fi
+          if grep -Fxiq -- "- $target" Blacklist.md; then
+            echo "result=already" >> "$GITHUB_OUTPUT"
+            exit 0
+          fi
+          if [ -n "$(tail -c1 Blacklist.md)" ]; then
+            echo >> Blacklist.md
+          fi
+          printf -- '- %s\n' "$target" >> Blacklist.md
+          git config user.name "github-actions[bot]"
+          git config user.email "41898282+github-actions[bot]@users.noreply.github.com"
+          git add Blacklist.md
+          git commit -m "blacklist $target (requested in #${{ github.event.issue.number }})"
+          git push origin HEAD || { git pull --rebase && git push origin HEAD; }
+          echo "result=added" >> "$GITHUB_OUTPUT"
+
+      - name: Reply and close
+        if: steps.auth.outputs.ok == 'true'
+        uses: actions/github-script@v9
+        env:
+          RESULT: ${{ steps.add.outputs.result }}
+          TARGET: ${{ steps.add.outputs.target }}
+        with:
+          script: |
+            const result = process.env.RESULT;
+            const target = process.env.TARGET;
+            const messages = {
+              added: `\`${target}\` has been added to the [Blacklist](https://github.com/${context.repo.owner}/${context.repo.repo}/wiki/Blacklist). The wiki guard will revert their recent wiki changes on its next run.`,
+              already: `\`${target}\` is already on the blacklist.`,
+              invalid: "Could not parse a valid login or email from the issue title.",
+              nopage: "The Blacklist wiki page does not exist."
+            };
+            await github.rest.issues.createComment({
+              owner: context.repo.owner,
+              repo: context.repo.repo,
+              issue_number: context.issue.number,
+              body: messages[result] || "No action taken."
+            });
+            await github.rest.issues.update({
+              owner: context.repo.owner,
+              repo: context.repo.repo,
+              issue_number: context.issue.number,
+              state: "closed",
+              state_reason: result === "added" ? "completed" : "not_planned"
+            });

.github/workflows/dockerhub.yml

@@ -10,9 +10,16 @@ on:
       - '**.sh'
       - "Dockerfile"
       - '.github/workflows/dockerhub.yml'
+  # A dispatch on a tag ref rebuilds that tag's own image; the weekly
+  # schedule (default branch only) dispatches the latest release tag so a
+  # pinned version tag picks up Alpine package security updates (issue 7209).
+  # master never publishes anything but latest.
+  schedule:
+    - cron: '17 3 * * 1'
+  workflow_dispatch:
 
 concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
+  group: ${{ github.workflow }}-${{ github.event_name }}-${{ github.ref }}
   cancel-in-progress: true
 
 env:
@@ -40,24 +47,30 @@ jobs:
   build:
     runs-on: ubuntu-latest
     needs: CheckToken
-    if: "contains(needs.CheckToken.outputs.hasToken, 'true')"
+    if: "github.event_name != 'schedule' && contains(needs.CheckToken.outputs.hasToken, 'true')"
+    permissions:
+      contents: read
+      packages: write
     steps:
       - name: checkout code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v7
         with:
           persist-credentials: false
       - name: Set up QEMU
-        uses: docker/setup-qemu-action@v2
+        uses: docker/setup-qemu-action@v4
       - name: Extract Docker metadata
         id: meta
         uses: docker/metadata-action@v6
         with:
           images: ${DOCKER_IMAGE}
       - name: Set up Docker Buildx
-        uses: docker/setup-buildx-action@v2
+        uses: docker/setup-buildx-action@v4
       - name: login to docker hub
         run: |
           echo "${{ secrets.DOCKER_PASSWORD }}" | docker login -u "${{ secrets.DOCKER_USERNAME }}" --password-stdin
+      - name: login to ghcr
+        run: |
+          echo "${{ secrets.GITHUB_TOKEN }}" | docker login ghcr.io -u "${{ github.actor }}" --password-stdin
       - name: build and push the image
         run: |
           if [[ $GITHUB_REF == refs/tags/* ]]; then
@@ -73,6 +86,8 @@ jobs:
             fi
           fi
 
+          echo "DOCKER_IMAGE_TAG=${DOCKER_IMAGE_TAG}" >>"$GITHUB_ENV"
+
           DOCKER_LABELS=()
           while read -r label; do
             DOCKER_LABELS+=(--label "${label}")
@@ -84,3 +99,44 @@ jobs:
             --output "type=image,push=true" \
             --build-arg AUTO_UPGRADE=${AUTO_UPGRADE} \
             --platform linux/arm64/v8,linux/amd64,linux/arm/v6,linux/arm/v7,linux/386,linux/ppc64le,linux/s390x .
+      - name: mirror the image to ghcr (best-effort)
+        run: |
+          docker buildx imagetools create \
+            --tag ghcr.io/${{ github.repository }}:${DOCKER_IMAGE_TAG} \
+            ${DOCKER_IMAGE}:${DOCKER_IMAGE_TAG} \
+            || echo "::warning::GHCR mirror failed; Docker Hub publish unaffected"
+
+  rebuild:
+    # weekly: dispatch this workflow on the latest release tag so the tag
+    # rebuilds its own image from its own commit and its own workflow file
+    runs-on: ubuntu-latest
+    if: github.event_name == 'schedule'
+    permissions:
+      contents: read
+      actions: write
+    env:
+      GH_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+    steps:
+      - name: dispatch a rebuild of the latest release tag
+        run: |
+          tag="$(gh api "repos/${GITHUB_REPOSITORY}/releases/latest" --jq .tag_name)"
+          if [ -z "$tag" ]; then
+            echo "::error::cannot resolve the latest release tag"
+            exit 1
+          fi
+          echo "dispatching a rebuild of ${tag}"
+          # A tag cut before this job existed carries a workflow file with no
+          # workflow_dispatch trigger; the API rejects the dispatch with 422.
+          # That is expected (nothing to rebuild there), so only a different
+          # error fails the job.
+          if ! out="$(gh workflow run dockerhub.yml --repo "${GITHUB_REPOSITORY}" --ref "${tag}" 2>&1)"; then
+            echo "$out"
+            case "$out" in
+            *"does not have 'workflow_dispatch' trigger"*)
+              echo "::warning::${tag} predates the dispatch trigger; skipping the rebuild"
+              ;;
+            *)
+              exit 1
+              ;;
+            esac
+          fi

.github/workflows/issue.yml

@@ -2,18 +2,128 @@ name: "Update issues"
 on:
   issues:
     types: [opened]
+  issue_comment:
+    types: [created]
+  pull_request_target:
+    types: [opened]
+
+permissions:
+  issues: write
+  pull-requests: write
 
 jobs:
   comment:
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/github-script@v6
+      - uses: actions/github-script@v9
         with:
           script: |
-            github.rest.issues.createComment({
-              issue_number: context.issue.number,
+            const item = context.payload.issue || context.payload.pull_request;
+
+            // Close on sight anything opened by a user on the wiki Blacklist
+            // page (maintained by the Wiki Guard workflow).
+            let blacklist = [];
+            try {
+              const res = await fetch(`https://raw.githubusercontent.com/wiki/${context.repo.owner}/${context.repo.repo}/Blacklist.md`);
+              if (res.ok) {
+                blacklist = (await res.text()).split("\n")
+                  .filter(l => l.startsWith("- "))
+                  .map(l => l.slice(2).trim().toLowerCase())
+                  .filter(Boolean);
+              }
+            } catch (e) {
+              core.warning(`Failed to fetch the blacklist: ${e}`);
+            }
+            // A comment on a closed tracking issue reopens it (the standard
+            // closing note promises this). Bots, blacklisted users and the
+            // maintainer's own comments don't reopen.
+            if (context.eventName === "issue_comment") {
+              const issue = context.payload.issue;
+              const commenter = context.payload.comment.user;
+              if (issue.pull_request || issue.state !== "closed") {
+                return;
+              }
+              if (!/^report\s+(bugs?|issues?)\b/i.test(issue.title)) {
+                return;
+              }
+              if (commenter.type === "Bot" ||
+                  commenter.login.toLowerCase() === "neilpang" ||
+                  blacklist.includes(commenter.login.toLowerCase())) {
+                return;
+              }
+              await github.rest.issues.update({
+                owner: context.repo.owner,
+                repo: context.repo.repo,
+                issue_number: issue.number,
+                state: "open"
+              });
+              return;
+            }
+
+            if (blacklist.includes(item.user.login.toLowerCase())) {
+              if (context.payload.pull_request) {
+                await github.rest.pulls.update({
+                  owner: context.repo.owner,
+                  repo: context.repo.repo,
+                  pull_number: item.number,
+                  state: "closed"
+                });
+              } else {
+                await github.rest.issues.update({
+                  owner: context.repo.owner,
+                  repo: context.repo.repo,
+                  issue_number: item.number,
+                  state: "closed",
+                  state_reason: "not_planned"
+                });
+              }
+              return;
+            }
+
+            if (context.payload.pull_request) {
+              return;
+            }
+
+            const issue = context.payload.issue;
+            if (issue.title.startsWith("blacklist:") || issue.title.startsWith("revert:")) {
+              // Handled by the Blacklist / Revert Command workflows.
+              return;
+            }
+            if (/^report\s+(bugs?|issues?)\b/i.test(issue.title)) {
+              // Tracking issue for a third-party dns/deploy/notify api:
+              // no upgrade boilerplate; assign it to the opener, label it,
+              // then close it right away to keep the issue list clean. Any
+              // later comment reopens it (see the issue_comment handler).
+              await github.rest.issues.addAssignees({
+                owner: context.repo.owner,
+                repo: context.repo.repo,
+                issue_number: issue.number,
+                assignees: [issue.user.login]
+              });
+              await github.rest.issues.addLabels({
+                owner: context.repo.owner,
+                repo: context.repo.repo,
+                issue_number: issue.number,
+                labels: ["3rd party api"]
+              });
+              await github.rest.issues.createComment({
+                owner: context.repo.owner,
+                repo: context.repo.repo,
+                issue_number: issue.number,
+                body: "Closing this tracking issue for now to keep the issue list clean. It remains the place to report problems with this provider -- if you hit a bug, comment here and the issue will be reopened."
+              });
+              await github.rest.issues.update({
+                owner: context.repo.owner,
+                repo: context.repo.repo,
+                issue_number: issue.number,
+                state: "closed",
+                state_reason: "completed"
+              });
+              return;
+            }
+            await github.rest.issues.createComment({
+              issue_number: issue.number,
               owner: context.repo.owner,
               repo: context.repo.repo,
-              body: "Please upgrade to the latest code and try again first. Maybe it's already fixed.              ```acme.sh --upgrade```              If it's still not working, please provide the log with `--debug 2`, otherwise, nobody can help you."
-              
+              body: "Please upgrade to the latest code and try again first. Maybe it's already fixed.              ```acme.sh --upgrade```              If it's still not working, please provide the log with `--debug 2`, otherwise, nobody can help you.              Before posting the log, review it and REDACT any secrets: private keys (`-----BEGIN ... PRIVATE KEY-----` blocks), API tokens and passwords."
             })

.github/workflows/pr_dns.yml

@@ -13,7 +13,7 @@ jobs:
     runs-on: ubuntu-latest
     if: github.actor != 'neilpang'
     steps:
-      - uses: actions/github-script@v6
+      - uses: actions/github-script@v9
         with:
           script: |
             await github.rest.issues.createComment({

.github/workflows/pr_notify.yml

@@ -15,7 +15,7 @@ jobs:
     runs-on: ubuntu-latest
     if: github.actor != 'neilpang'
     steps:
-      - uses: actions/github-script@v6
+      - uses: actions/github-script@v9
         with:
           script: |
             await github.rest.issues.createComment({

.github/workflows/revert-command.yml

@@ -0,0 +1,110 @@
+name: Revert Command
+
+# An issue titled "revert: <wiki-commit-sha>" opened by the maintainer or
+# a write-access member reverts that commit in the wiki repository and
+# closes the issue. The wiki-monitor notification embeds a prefilled link
+# that opens such an issue in one click.
+
+on:
+  issues:
+    types: [opened]
+
+permissions:
+  contents: write
+  issues: write
+
+# Share the wiki-guard concurrency group so we never push to the wiki
+# at the same time as the guard.
+concurrency:
+  group: wiki-guard
+  cancel-in-progress: false
+
+jobs:
+  revert:
+    # Upstream only: forks have no <fork>.wiki repository to push to.
+    if: github.repository == 'acmesh-official/acme.sh' && startsWith(github.event.issue.title, 'revert:')
+    runs-on: ubuntu-latest
+    steps:
+      - name: Check authorization
+        id: auth
+        run: |
+          assoc="${{ github.event.issue.author_association }}"
+          case "$assoc" in
+            OWNER|MEMBER|COLLABORATOR)
+              echo "ok=true" >> "$GITHUB_OUTPUT"
+              ;;
+            *)
+              echo "issue author is not authorized ($assoc); ignoring"
+              echo "ok=false" >> "$GITHUB_OUTPUT"
+              ;;
+          esac
+
+      - name: Checkout wiki repository
+        if: steps.auth.outputs.ok == 'true'
+        uses: actions/checkout@v7
+        with:
+          repository: ${{ github.repository }}.wiki
+          path: wiki
+          fetch-depth: 0
+
+      - name: Revert the wiki commit
+        if: steps.auth.outputs.ok == 'true'
+        id: revert
+        env:
+          TITLE: ${{ github.event.issue.title }}
+        run: |
+          target="$(printf '%s' "$TITLE" \
+            | sed 's/^revert:[[:space:]]*//; s/[[:space:]].*$//' \
+            | tr 'A-Z' 'a-z')"
+          case "$target" in
+            *[!0-9a-f]*|"")
+              echo "invalid commit sha: '$target'"
+              echo "result=invalid" >> "$GITHUB_OUTPUT"
+              exit 0
+              ;;
+          esac
+          echo "target=$target" >> "$GITHUB_OUTPUT"
+          cd wiki
+          if ! git cat-file -e "$target^{commit}" 2>/dev/null; then
+            echo "result=notfound" >> "$GITHUB_OUTPUT"
+            exit 0
+          fi
+          git config user.name "github-actions[bot]"
+          git config user.email "41898282+github-actions[bot]@users.noreply.github.com"
+          if git revert --no-edit "$target"; then
+            git push origin HEAD || { git pull --rebase && git push origin HEAD; }
+            echo "result=reverted" >> "$GITHUB_OUTPUT"
+          else
+            git revert --abort || true
+            echo "result=conflict" >> "$GITHUB_OUTPUT"
+          fi
+
+      - name: Reply and close
+        if: steps.auth.outputs.ok == 'true'
+        uses: actions/github-script@v9
+        env:
+          RESULT: ${{ steps.revert.outputs.result }}
+          TARGET: ${{ steps.revert.outputs.target }}
+        with:
+          script: |
+            const result = process.env.RESULT;
+            const target = process.env.TARGET;
+            const messages = {
+              reverted: `Wiki commit \`${target}\` has been reverted.`,
+              conflict: `Reverting \`${target}\` conflicts with later edits; please revert manually from the page history.`,
+              notfound: `Commit \`${target}\` was not found in the wiki repository.`,
+              invalid: "Could not parse a commit sha from the issue title."
+            };
+            await github.rest.issues.createComment({
+              owner: context.repo.owner,
+              repo: context.repo.repo,
+              issue_number: context.issue.number,
+              body: messages[result] || "No action taken."
+            });
+            await github.rest.issues.update({
+              owner: context.repo.owner,
+              repo: context.repo.repo,
+              issue_number: context.issue.number,
+              state: "closed",
+              state_reason: result === "reverted" ? "completed" : "not_planned"
+            });

.github/workflows/vtag.yml

@@ -0,0 +1,67 @@
+name: Mirror version tag
+
+# Historical release tags are plain version numbers ("3.1.3") and cannot be
+# renamed. When a plain version tag is pushed (including the tag created by
+# publishing a GitHub release), mirror it as a "v"-prefixed tag ("v3.1.3")
+# pointing to the same object, so both forms exist.
+# No retrigger loop: the tag filter never matches a "v"-prefixed tag, and
+# refs created with GITHUB_TOKEN do not fire workflows anyway.
+# The job mirrors first and then fails when the pushed tag is lightweight,
+# which is what the release form produces: that tag can never carry a
+# signature, so the failure has to be loud.
+
+on:
+  push:
+    tags:
+      - '[0-9]*'
+
+permissions:
+  contents: write
+
+jobs:
+  vtag:
+    if: github.repository == 'acmesh-official/acme.sh'
+    runs-on: ubuntu-latest
+    steps:
+      - name: Create the v-prefixed tag
+        env:
+          GH_TOKEN: ${{ github.token }}
+          REPO: ${{ github.repository }}
+          TAG: ${{ github.ref_name }}
+        run: |
+          # Mirror the object the pushed tag actually points at: the commit
+          # for a lightweight tag, the tag object itself for an annotated or
+          # signed one. Pointing the mirror at the commit would strip the
+          # signature, so "git verify-tag v3.1.3" would fail while
+          # "git verify-tag 3.1.3" succeeds.
+          _ref="$(gh api "repos/$REPO/git/ref/tags/$TAG" --jq '.object.sha + " " + .object.type')"
+          sha="${_ref%% *}"
+          objtype="${_ref##* }"
+          if [ -z "$sha" ] || [ "$sha" = "null" ]; then
+            echo "Could not resolve refs/tags/$TAG"
+            exit 1
+          fi
+          if gh api "repos/$REPO/git/ref/tags/v$TAG" >/dev/null 2>&1; then
+            echo "Tag v$TAG already exists, nothing to do."
+          else
+            gh api "repos/$REPO/git/refs" -f ref="refs/tags/v$TAG" -f sha="$sha"
+            echo "Created tag v$TAG -> $sha"
+          fi
+
+      - name: Check that the tag is signable
+        env:
+          GH_TOKEN: ${{ github.token }}
+          REPO: ${{ github.repository }}
+          TAG: ${{ github.ref_name }}
+        run: |
+          # A release published from the GitHub UI creates the tag server-side
+          # as a lightweight ref, which points straight at a commit and can
+          # never carry a signature (3.1.5 shipped that way, see issue 7273).
+          # The tag has to be created locally with "git tag -s" and pushed
+          # BEFORE the release is published, then selected on the release form.
+          objtype="$(gh api "repos/$REPO/git/ref/tags/$TAG" --jq .object.type)"
+          if [ "$objtype" != "tag" ]; then
+            echo "::error::refs/tags/$TAG points at a $objtype, not a tag object. It is a lightweight tag and carries no signature. Recreate it locally with 'git tag -s $TAG' and push it before publishing the release."
+            exit 1
+          fi
+          echo "refs/tags/$TAG is a tag object."

.github/workflows/wiki-guard.yml

@@ -0,0 +1,325 @@
+name: Wiki Guard
+
+# Rules enforced here:
+#  - Only the maintainer and write-access members may delete or rename wiki
+#    pages. Anyone else doing so gets blacklisted and the page restored to
+#    its last good revision.
+#  - Only the maintainer and write-access members may edit the Blacklist
+#    wiki page. Anyone else touching it gets blacklisted and the page
+#    reverted.
+#  - Any wiki change made by a blacklisted identity is reverted.
+# A "good" revision is one authored by the maintainer, by this bot, or by
+# a non-blacklisted user -- restoring from the deleted commit's parent is
+# NOT safe, because vandals replace a page before destroying it and the
+# parent would launder their version into a bot commit.
+# The gollum event only fires on page create/update, never on deletion,
+# so violations are caught by polling the wiki git history.
+
+on:
+  schedule:
+    - cron: "*/10 * * * *"
+  gollum:
+  # Piggyback on frequent repo activity, because the cron schedule is
+  # best-effort and often delayed well beyond its interval.
+  issues:
+    types: [opened]
+  issue_comment:
+    types: [created]
+  workflow_dispatch:
+
+permissions:
+  contents: write
+  issues: write
+
+concurrency:
+  group: wiki-guard
+  cancel-in-progress: false
+
+jobs:
+  guard:
+    # Forks have no <fork>.wiki repository, so the checkout below would
+    # fail there -- run only in the upstream repository.
+    if: github.repository == 'acmesh-official/acme.sh'
+    runs-on: ubuntu-latest
+    steps:
+      - name: Checkout wiki repository
+        uses: actions/checkout@v7
+        with:
+          repository: ${{ github.repository }}.wiki
+          path: wiki
+          fetch-depth: 0
+
+      - name: Enforce wiki rules
+        id: guard
+        env:
+          # WIKI_GUARD_TOKEN: a PAT with read:org, needed to enumerate
+          # members whose write access comes via the organization -- the
+          # repo-scoped GITHUB_TOKEN only sees direct collaborators.
+          GH_TOKEN: ${{ secrets.WIKI_GUARD_TOKEN || secrets.GITHUB_TOKEN }}
+        run: |
+          # Logins with write (push) access to the repository, including
+          # organization members -- they may delete/rename pages and edit
+          # the blacklist just like the maintainer. If the API call fails,
+          # the list stays empty and enforcement falls back to
+          # maintainer-only, which is the safe direction.
+          gh api "repos/${GITHUB_REPOSITORY}/collaborators?per_page=100" --paginate \
+            -q '.[] | select(.permissions.push) | .login' 2>/dev/null \
+            | tr 'A-Z' 'a-z' | sort -u > writers.txt || true
+          echo "write-access members loaded: $(wc -l < writers.txt)"
+          cd wiki
+          git config core.quotePath false
+
+          # Any author email under this domain is the maintainer.
+          OWNER_DOMAIN="neilpang.com"
+          # Our own enforcement commits.
+          BOT_EMAIL="41898282+github-actions[bot]@users.noreply.github.com"
+          BL_PAGE="Blacklist.md"
+          # Rolling window; the cron runs every 10 minutes, so 7 days gives
+          # ample overlap without re-judging old changes the maintainer
+          # already accepted.
+          WINDOW="7 days ago"
+
+          : > ../actions.txt
+          : > ../bl_new.txt
+
+          is_owner() {
+            case "$1" in
+              *@"$OWNER_DOMAIN") return 0 ;;
+            esac
+            return 1
+          }
+
+          is_bot() {
+            [ "$1" = "$BOT_EMAIL" ]
+          }
+
+          author_email() {
+            git show -s --format=%ae "$1" | tr 'A-Z' 'a-z'
+          }
+
+          # Identity of a commit author: the GitHub login when the email is a
+          # users.noreply.github.com address, otherwise the email itself.
+          identity_of() {
+            case "$1" in
+              *+*@users.noreply.github.com)
+                printf '%s\n' "$1" | sed 's/^[^+]*+//; s/@users\.noreply\.github\.com$//'
+                ;;
+              *@users.noreply.github.com)
+                printf '%s\n' "$1" | sed 's/@users\.noreply\.github\.com$//'
+                ;;
+              *)
+                printf '%s\n' "$1"
+                ;;
+            esac
+          }
+
+          is_blacklisted() {
+            grep -Fxq "$1" ../bl_all.txt
+          }
+
+          # Trusted committers: the maintainer (by email domain), this bot,
+          # and anyone whose GitHub login has write access to the repo.
+          is_trusted() {
+            if is_owner "$1" || is_bot "$1"; then
+              return 0
+            fi
+            grep -Fxq "$(identity_of "$1")" ../writers.txt
+          }
+
+          # Newest commit on file $1 authored by a non-blacklisted user.
+          last_good_for() {
+            for g in $(git log --format=%H --no-renames -- "$1"); do
+              gae="$(author_email "$g")"
+              if is_trusted "$gae"; then
+                printf '%s\n' "$g"
+                return 0
+              fi
+              gid="$(identity_of "$gae")"
+              if ! is_blacklisted "$gid" && ! is_blacklisted "$gae"; then
+                printf '%s\n' "$g"
+                return 0
+              fi
+            done
+            return 0
+          }
+
+          if [ -e "$BL_PAGE" ]; then
+            page_existed=1
+          else
+            page_existed=""
+          fi
+
+          # ---- 1. Last good version of the blacklist page: the newest
+          # revision authored by the maintainer or by this bot. Everything
+          # else on that page is tampering and is discarded.
+          bl_good_commit=""
+          for c in $(git log --format=%H --no-renames -- "$BL_PAGE"); do
+            ae="$(author_email "$c")"
+            if is_trusted "$ae"; then
+              bl_good_commit="$c"
+              break
+            fi
+          done
+          if [ -n "$bl_good_commit" ] && git cat-file -e "$bl_good_commit:$BL_PAGE" 2>/dev/null; then
+            git show "$bl_good_commit:$BL_PAGE" > ../bl_page.txt
+          else
+            {
+              echo "# Blacklist"
+              echo ""
+              echo "Users listed below violated the wiki rules (deleted or renamed"
+              echo "pages, or tampered with this page). Their new issues and pull"
+              echo "requests are closed on sight and their wiki edits are reverted"
+              echo "automatically. Only the maintainer and write-access members"
+              echo "may edit this page."
+              echo ""
+              echo "To pardon a user while their violation is still inside the"
+              echo "scan window, replace their entry with: pardon: username"
+              echo ""
+            } > ../bl_page.txt
+          fi
+          sed -n 's/^- *//p' ../bl_page.txt | tr -d '\r' | tr 'A-Z' 'a-z' | sort -u > ../bl_good.txt
+          sed -n 's/^[Pp]ardon: *//p' ../bl_page.txt | tr -d '\r' | tr 'A-Z' 'a-z' | sort -u > ../bl_pardon.txt
+
+          bl_add() {
+            if grep -Fxq "$1" ../bl_pardon.txt; then
+              return 0
+            fi
+            if ! grep -Fxq "$1" ../bl_good.txt && ! grep -Fxq "$1" ../bl_new.txt; then
+              printf '%s\n' "$1" >> ../bl_new.txt
+              printf '%s\n' "- blacklisted \`$1\`: $2" >> ../actions.txt
+            fi
+          }
+
+          # ---- 2. Blacklist everyone who deleted or renamed a page.
+          # --no-renames makes a rename count as a deletion of the old path.
+          for c in $(git log --since="$WINDOW" --diff-filter=D --no-renames --format=%H); do
+            ae="$(author_email "$c")"
+            if is_trusted "$ae"; then
+              continue
+            fi
+            an="$(git show -s --format=%an "$c")"
+            bl_add "$(identity_of "$ae")" "deleted or renamed pages in $c ($an <$ae>)"
+          done
+
+          # ---- 3. Blacklist everyone else who touched the blacklist page.
+          # The revert of their tampering falls out of steps 5 and 6.
+          for c in $(git log --since="$WINDOW" --format=%H --no-renames -- "$BL_PAGE"); do
+            ae="$(author_email "$c")"
+            if is_trusted "$ae"; then
+              continue
+            fi
+            an="$(git show -s --format=%an "$c")"
+            bl_add "$(identity_of "$ae")" "tampered with \`$BL_PAGE\` in $c ($an <$ae>)"
+          done
+
+          sort -u ../bl_new.txt > ../bl_new_u.txt
+          cat ../bl_good.txt ../bl_new_u.txt | sort -u > ../bl_all.txt
+
+          # ---- 4. Restore pages that are currently missing because a
+          # non-maintainer deleted them, using the last good revision.
+          git log --since="$WINDOW" --diff-filter=D --no-renames --name-only --format= \
+            | sort -u \
+            | while IFS= read -r f; do
+                if [ -z "$f" ] || [ "$f" = "$BL_PAGE" ] || [ -e "$f" ]; then
+                  continue
+                fi
+                del="$(git log -1 --diff-filter=D --no-renames --format=%H -- "$f")"
+                if [ -z "$del" ]; then
+                  continue
+                fi
+                ae="$(author_email "$del")"
+                if is_trusted "$ae"; then
+                  continue
+                fi
+                good="$(last_good_for "$f")"
+                if [ -n "$good" ] && git cat-file -e "$good:$f" 2>/dev/null; then
+                  git checkout "$good" -- "$f"
+                  printf '%s\n' "- restored \`$f\` (deleted in $del) from its last good revision $good" >> ../actions.txt
+                fi
+              done
+
+          # ---- 5. Revert every recent change made by a blacklisted
+          # identity: each touched file goes back to its newest revision
+          # authored by a non-blacklisted user; a file that has no such
+          # revision (they created it) is removed.
+          if [ -s ../bl_all.txt ]; then
+            for c in $(git log --since="$WINDOW" --format=%H --no-renames); do
+              ae="$(author_email "$c")"
+              if is_trusted "$ae"; then
+                continue
+              fi
+              id="$(identity_of "$ae")"
+              if ! is_blacklisted "$id" && ! is_blacklisted "$ae"; then
+                continue
+              fi
+              git show --name-only --no-renames --format= "$c" \
+                | while IFS= read -r f; do
+                    if [ -z "$f" ] || [ "$f" = "$BL_PAGE" ]; then
+                      continue
+                    fi
+                    good="$(last_good_for "$f")"
+                    if [ -n "$good" ] && git cat-file -e "$good:$f" 2>/dev/null; then
+                      want="$(git rev-parse "$good:$f")"
+                      have="$(git hash-object -- "$f" 2>/dev/null || echo missing)"
+                      if [ "$want" != "$have" ]; then
+                        git checkout "$good" -- "$f"
+                        printf '%s\n' "- reverted \`$f\` to its last good revision $good (undoing change by \`$id\` in $c)" >> ../actions.txt
+                      fi
+                    elif [ -e "$f" ]; then
+                      git rm -q -- "$f"
+                      printf '%s\n' "- removed \`$f\` created by blacklisted \`$id\` in $c" >> ../actions.txt
+                    fi
+                  done
+            done
+          fi
+
+          # ---- 6. Regenerate the blacklist page: the last good text plus
+          # any newly blacklisted identities. This both reverts tampering
+          # and records new violators; manual edits by the maintainer are
+          # preserved as the new good text.
+          cp ../bl_page.txt ../bl_page_new.txt
+          if [ -s ../bl_page_new.txt ] && [ -n "$(tail -c1 ../bl_page_new.txt)" ]; then
+            echo >> ../bl_page_new.txt
+          fi
+          while IFS= read -r id; do
+            if [ -n "$id" ] && ! grep -Fxiq -- "- $id" ../bl_page_new.txt; then
+              printf -- '- %s\n' "$id" >> ../bl_page_new.txt
+            fi
+          done < ../bl_new_u.txt
+          if ! cmp -s ../bl_page_new.txt "$BL_PAGE" 2>/dev/null; then
+            cp ../bl_page_new.txt "$BL_PAGE"
+            git add -- "$BL_PAGE"
+            if [ -n "$page_existed" ] || [ -s ../bl_new_u.txt ]; then
+              printf '%s\n' "- updated \`$BL_PAGE\`" >> ../actions.txt
+            fi
+          fi
+
+          # ---- 7. Commit, push, notify.
+          if [ -n "$(git status --porcelain)" ]; then
+            git config user.name "github-actions[bot]"
+            git config user.email "$BOT_EMAIL"
+            git commit -m "wiki-guard: restore pages and enforce blacklist"
+            git push origin HEAD || { git pull --rebase && git push origin HEAD; }
+          fi
+          if [ -s ../actions.txt ]; then
+            {
+              echo "The wiki guard handled the following rule violations:"
+              echo ""
+              cat ../actions.txt
+              echo ""
+              echo "Blacklist: https://github.com/${GITHUB_REPOSITORY}/wiki/Blacklist"
+              echo "Wiki: https://github.com/${GITHUB_REPOSITORY}/wiki"
+            } > ../guard-msg.txt
+            echo "acted=true" >> "$GITHUB_OUTPUT"
+          else
+            echo "No rule violations found."
+            echo "acted=false" >> "$GITHUB_OUTPUT"
+          fi
+
+      - name: Create issue to notify Neilpang
+        if: steps.guard.outputs.acted == 'true'
+        uses: peter-evans/create-issue-from-file@v6
+        with:
+          title: "Wiki guard: rule violations handled"
+          content-filepath: ./guard-msg.txt
+          assignees: Neilpang

.github/workflows/wiki-monitor.yml

@@ -9,13 +9,14 @@ jobs:
     if: github.actor != 'neilpang'
     steps:
       - name: Checkout wiki repository
-        uses: actions/checkout@v6
+        uses: actions/checkout@v7
         with:
           repository: ${{ github.repository }}.wiki
           path: wiki
           fetch-depth: 0
 
       - name: Generate wiki change message
+        id: msg
         run: |
             actor="${{ github.actor }}"
             sender_url=$(jq -r '.sender.html_url' "$GITHUB_EVENT_PATH")
@@ -27,6 +28,17 @@ jobs:
             now="$(date '+%Y-%m-%d %H:%M:%S')"
 
             cd wiki
+            # Skip notification when the change was authored by the
+            # maintainer himself (any author email under neilpang.com),
+            # e.g. a direct git push to the wiki repository.
+            author_email=$(git show -s --format=%ae "$page_sha" 2>/dev/null | tr 'A-Z' 'a-z')
+            case "$author_email" in
+              *@neilpang.com)
+                echo "Change authored by maintainer ($author_email); skipping notification."
+                echo "notify=false" >> "$GITHUB_OUTPUT"
+                exit 0
+                ;;
+            esac
             prev_sha=$(git rev-list $page_sha^ -- "$page_name.md" | head -n 1)
             if [ -n "$prev_sha" ]; then
                 git diff $prev_sha $page_sha -- "$page_name.md" > ../wiki.diff || echo "(No diff found)" > ../wiki.diff
@@ -41,17 +53,21 @@ jobs:
             echo "Time: $now"
             echo "Page: [$page_name]($page_url) (Action: $page_action)"
             echo "Comment: $page_summary"
-            echo "[Click here to Revert](${page_url}/_history)"
+            echo "[Click here to Revert](https://github.com/${GITHUB_REPOSITORY}/issues/new?title=revert%3A+${page_sha}&body=Revert+wiki+commit+${page_sha}+by+@${actor}.)"
+            echo ""
+            echo "[Click here to Blacklist @$actor](https://github.com/${GITHUB_REPOSITORY}/issues/new?title=blacklist%3A+${actor}&body=Blacklist+@${actor},+requested+from+the+wiki+monitor.)"
             echo ""
             echo "----"
-            echo "###  diff："
+            echo "###  diff:"
             echo '```diff'
             cat wiki.diff
             echo '```'
             } > wiki-change-msg.txt
+            echo "notify=true" >> "$GITHUB_OUTPUT"
 
       - name: Create issue to notify Neilpang
-        uses: peter-evans/create-issue-from-file@v5
+        if: steps.msg.outputs.notify == 'true'
+        uses: peter-evans/create-issue-from-file@v6
         with:
           title: "Wiki edited"
           content-filepath: ./wiki-change-msg.txt

CONTRIBUTING.md

@@ -0,0 +1,8 @@
+# Contributing
+
+1. Do NOT send pull request to `master` branch.
+Please send to `dev` branch instead.
+Any PR to `master` branch will NOT be merged.
+
+2. For dns api support, read this guide first: https://github.com/acmesh-official/acme.sh/wiki/DNS-API-Dev-Guide
+You will NOT get any review without passing this guide.  You also need to fix the CI errors.

Dockerfile

@@ -81,8 +81,8 @@ if [ \"\$1\" = \"daemon\" ];  then \n \
      echo \"\$LE_CONFIG_HOME/crontab not found, generating one\" \n \
      time=\$(date -u \"+%s\") \n \
      random_minute=\$((\$time % 60)) \n \
-     random_hour=\$((\$time / 60 % 24)) \n \
-     echo \"\$random_minute \$random_hour * * * \\\"\$LE_WORKING_DIR\\\"/acme.sh --cron --home \\\"\$LE_WORKING_DIR\\\" --config-home \\\"\$LE_CONFIG_HOME\\\"\" > \"\$LE_CONFIG_HOME\"/crontab \n \
+     random_hour=\$((\$time / 60 % 6)) \n \
+     echo \"\$random_minute \$random_hour,\$((\$random_hour + 6)),\$((\$random_hour + 12)),\$((\$random_hour + 18)) * * * \\\"\$LE_WORKING_DIR\\\"/acme.sh --cron --home \\\"\$LE_WORKING_DIR\\\" --config-home \\\"\$LE_CONFIG_HOME\\\"\" > \"\$LE_CONFIG_HOME\"/crontab \n \
   fi \n \
   echo \"Running Supercronic using crontab at \$LE_CONFIG_HOME/crontab\" \n \
   exec -- /usr/bin/supercronic \"\$LE_CONFIG_HOME/crontab\" \n \

README.md

@@ -1,7 +1,21 @@
 <p align="center">
-  <a href="https://zerossl.com/?fromacme.sh">
-    <img src="https://github.com/user-attachments/assets/7531085e-399b-4ac2-82a2-90d14a0b7f05" alt="zerossl.com">
-  </a>
+<a href="https://zerossl.com?utm_source=acme-sh">
+<picture>
+  <!-- Dark mode -->
+  <source
+    media="(prefers-color-scheme: dark)"
+    srcset="https://github.com/user-attachments/assets/1308516b-e0cc-496d-b5df-e3932423ead6" />
+  <!-- Light mode -->
+  <source
+    media="(prefers-color-scheme: light)"
+    srcset="https://github.com/user-attachments/assets/4ba7a79e-8cc9-4d49-87fc-02d44fb7b043" />
+  <!-- Fallback for environments without media queries -->
+  <img
+    alt="ZeroSSL"
+    src="https://github.com/user-attachments/assets/4ba7a79e-8cc9-4d49-87fc-02d44fb7b043"
+    height="auto" />
+</picture>
+</a>
 </p>
 
 <h1 align="center">🔐 acme.sh</h1>
@@ -17,9 +31,15 @@
   <a href="https://github.com/acmesh-official/acme.sh/actions/workflows/Solaris.yml"><img src="https://github.com/acmesh-official/acme.sh/actions/workflows/Solaris.yml/badge.svg" alt="Solaris"></a>
   <a href="https://github.com/acmesh-official/acme.sh/actions/workflows/DragonFlyBSD.yml"><img src="https://github.com/acmesh-official/acme.sh/actions/workflows/DragonFlyBSD.yml/badge.svg" alt="DragonFlyBSD"></a>
   <a href="https://github.com/acmesh-official/acme.sh/actions/workflows/MidnightBSD.yml"><img src="https://github.com/acmesh-official/acme.sh/actions/workflows/MidnightBSD.yml/badge.svg" alt="MidnightBSD"></a>
+  <a href="https://github.com/acmesh-official/acme.sh/actions/workflows/GhostBSD.yml"><img src="https://github.com/acmesh-official/acme.sh/actions/workflows/GhostBSD.yml/badge.svg" alt="GhostBSD"></a>
   <a href="https://github.com/acmesh-official/acme.sh/actions/workflows/Omnios.yml"><img src="https://github.com/acmesh-official/acme.sh/actions/workflows/Omnios.yml/badge.svg" alt="Omnios"></a>
   <a href="https://github.com/acmesh-official/acme.sh/actions/workflows/OpenIndiana.yml"><img src="https://github.com/acmesh-official/acme.sh/actions/workflows/OpenIndiana.yml/badge.svg" alt="OpenIndiana"></a>
+  <a href="https://github.com/acmesh-official/acme.sh/actions/workflows/Tribblix.yml"><img src="https://github.com/acmesh-official/acme.sh/actions/workflows/Tribblix.yml/badge.svg" alt="Tribblix"></a>
   <a href="https://github.com/acmesh-official/acme.sh/actions/workflows/Haiku.yml"><img src="https://github.com/acmesh-official/acme.sh/actions/workflows/Haiku.yml/badge.svg" alt="Haiku"></a>
+  <a href="https://github.com/acmesh-official/acme.sh/actions/workflows/Hurd.yml"><img src="https://github.com/acmesh-official/acme.sh/actions/workflows/Hurd.yml/badge.svg" alt="Hurd"></a>
+  <a href="https://github.com/acmesh-official/acme.sh/actions/workflows/OpenEuler.yml"><img src="https://github.com/acmesh-official/acme.sh/actions/workflows/OpenEuler.yml/badge.svg" alt="OpenEuler"></a>
+  <a href="https://github.com/acmesh-official/acme.sh/actions/workflows/HardenedBSD.yml"><img src="https://github.com/acmesh-official/acme.sh/actions/workflows/HardenedBSD.yml/badge.svg" alt="HardenedBSD"></a>
+  <a href="https://github.com/acmesh-official/acme.sh/actions/workflows/OPNsense.yml"><img src="https://github.com/acmesh-official/acme.sh/actions/workflows/OPNsense.yml/badge.svg" alt="OPNsense"></a>
 </p>
 
 <p align="center">
@@ -112,6 +132,12 @@
 |23|-----| OpenWRT: Tested and working. See [wiki page](https://github.com/acmesh-official/acme.sh/wiki/How-to-run-on-OpenWRT)
 |24|[![](https://acmesh-official.github.io/acmetest/status/proxmox.svg)](https://github.com/acmesh-official/letest#here-are-the-latest-status)| Proxmox: See Proxmox VE Wiki. Version [4.x, 5.0, 5.1](https://pve.proxmox.com/wiki/HTTPS_Certificate_Configuration_(Version_4.x,_5.0_and_5.1)#Let.27s_Encrypt_using_acme.sh), version [5.2 and up](https://pve.proxmox.com/wiki/Certificate_Management)
 |25|[![Haiku](https://github.com/acmesh-official/acme.sh/actions/workflows/Haiku.yml/badge.svg)](https://github.com/acmesh-official/acme.sh/actions/workflows/Haiku.yml)|Haiku OS
+|26|[![Tribblix](https://github.com/acmesh-official/acme.sh/actions/workflows/Tribblix.yml/badge.svg)](https://github.com/acmesh-official/acme.sh/actions/workflows/Tribblix.yml)|Tribblix
+|27|[![GhostBSD](https://github.com/acmesh-official/acme.sh/actions/workflows/GhostBSD.yml/badge.svg)](https://github.com/acmesh-official/acme.sh/actions/workflows/GhostBSD.yml)|GhostBSD
+|28|[![Hurd](https://github.com/acmesh-official/acme.sh/actions/workflows/Hurd.yml/badge.svg)](https://github.com/acmesh-official/acme.sh/actions/workflows/Hurd.yml)|GNU Hurd
+|29|[![OpenEuler](https://github.com/acmesh-official/acme.sh/actions/workflows/OpenEuler.yml/badge.svg)](https://github.com/acmesh-official/acme.sh/actions/workflows/OpenEuler.yml)|openEuler
+|30|[![HardenedBSD](https://github.com/acmesh-official/acme.sh/actions/workflows/HardenedBSD.yml/badge.svg)](https://github.com/acmesh-official/acme.sh/actions/workflows/HardenedBSD.yml)|HardenedBSD
+|31|[![OPNsense](https://github.com/acmesh-official/acme.sh/actions/workflows/OPNsense.yml/badge.svg)](https://github.com/acmesh-official/acme.sh/actions/workflows/OPNsense.yml)|OPNsense
 
 
 > 🧪 Check our [testing project](https://github.com/acmesh-official/acmetest)
@@ -146,6 +172,7 @@
 | 🌐 DNS mode | Use DNS TXT records |
 | 🔗 [DNS alias mode](https://github.com/acmesh-official/acme.sh/wiki/DNS-alias-mode) | Use DNS alias for verification |
 | 📡 [Stateless mode](https://github.com/acmesh-official/acme.sh/wiki/Stateless-Mode) | Stateless verification |
+| 📌 [DNS persist mode](https://github.com/acmesh-official/acme.sh/wiki/DNS-persist-mode) | Persistent DNS TXT record ([draft-ietf-acme-dns-persist-01](https://datatracker.ietf.org/doc/draft-ietf-acme-dns-persist/)) |
 
 ---
 
@@ -204,6 +231,31 @@ Cron entry example:
 acme.sh -h
 ```
 
+#### 🔏 Verify a Release
+
+Release tags from `3.1.6` on are signed with the maintainer's SSH key. The
+signing happens on the maintainer's machine, so the private key is never
+available to CI. The public half is [`allowed_signers`](allowed_signers) in
+this repository. From a clone:
+
+```bash
+git config gpg.ssh.allowedSignersFile allowed_signers
+```
+
+```bash
+git verify-tag 3.1.6
+```
+
+The signature covers the tag object, which pins the commit and therefore the
+whole tree, so a good signature verifies every file at that release and no
+separate tarball checksum is needed. Build a tarball from the verified tag:
+
+```bash
+git archive --format=tar.gz --prefix=acme.sh-3.1.6/ 3.1.6 > acme.sh-3.1.6.tar.gz
+```
+
+> ⚠️ Tags up to `3.1.5` are unsigned.
+
 ---
 
 ### 2️⃣ Issue a Certificate
@@ -396,7 +448,53 @@ acme.sh --renew -d example.com
 
 ---
 
-### 🔟 Issue Certificates of Different Key Types (ECC or RSA)
+### 🔟 Use DNS Persist Mode
+
+📖 Wiki: https://github.com/acmesh-official/acme.sh/wiki/DNS-persist-mode
+
+📚 Spec: [draft-ietf-acme-dns-persist-01](https://datatracker.ietf.org/doc/draft-ietf-acme-dns-persist/)
+
+DNS persist mode lets you place a **single, long‑lived `_validation-persist` TXT record** in your zone and reuse it for every subsequent issuance and renewal. There is no per-issuance challenge token, so renewals require **no DNS edits** — useful when DNS API access is not available but you still want unattended renewals.
+
+#### 🪄 Step 1: Print the TXT record value
+
+```bash
+acme.sh --make-dns-persist-value -d example.com [--server letsencrypt] [--dns-persist-wildcard] [--dns-persist-ca-name "sectigo.com"] [--dns-persist-days 365]
+```
+
+Options:
+
+| Flag | Description |
+|------|-------------|
+| `--server <ca>` | Pick the CA (default is your configured default). The account is registered automatically if you have not used this CA before. |
+| `--dns-persist-wildcard` | Adds `policy=wildcard` to the record so it also authorizes wildcard / subdomain certs. |
+| `--dns-persist-ca-name <name>` | Use a specific CA identity domain (e.g. `sectigo.com`). If omitted, identities are read from the ACME directory's `caaIdentities` field and one record per identity is printed — you only need to add **any one** of them. |
+| `--dns-persist-days <N>` | Adds `persistUntil=<unix-timestamp>` to the record, set to N days from now. The CA will refuse new validations against the record after that time. Omit for a record with no expiry. |
+
+You should get an output like:
+
+```sh
+TXT persist domain:_validation-persist.example.com
+TXT persist value :"letsencrypt.org; accounturi=https://acme-v02.api.letsencrypt.org/acme/acct/123456789"
+```
+
+#### ✍️ Step 2: Add the TXT record to your DNS
+
+Add the printed `TXT persist domain` / `TXT persist value` pair as a TXT record at your DNS provider, then wait for it to propagate.
+
+#### 📜 Step 3: Issue the certificate
+
+```bash
+acme.sh --issue -d example.com --dns-persist
+```
+
+✅ **Done!** No challenge token is provisioned during issuance — the CA reads the persistent TXT record directly.
+
+> 🔄 Renewals just work: `acme.sh --renew -d example.com` (or the cron job) reuses the same TXT record automatically — no further DNS edits needed.
+
+---
+
+### 1️⃣1️⃣ Issue Certificates of Different Key Types (ECC or RSA)
 
 Just set the `keylength` to a valid, supported value.
 
@@ -427,7 +525,7 @@ acme.sh --issue -w /home/wwwroot/example.com -d example.com -d www.example.com -
 
 ---
 
-### 1️⃣1️⃣ Issue Wildcard Certificates
+### 1️⃣2️⃣ Issue Wildcard Certificates
 
 It's simple! Just give a wildcard domain as the `-d` parameter:
 
@@ -439,9 +537,9 @@ acme.sh --issue -d example.com -d '*.example.com' --dns dns_cf
 
 ---
 
-### 1️⃣2️⃣ How to Renew Certificates
+### 1️⃣3️⃣ How to Renew Certificates
 
-> 🔄 No need to renew manually! All certs will be renewed automatically every **30** days.
+> 🔄 No need to renew manually! All certs will be renewed automatically every **30** days, **or earlier when the CA's ARI says so** (see below).
 
 However, you can force a renewal:
 
@@ -455,9 +553,43 @@ acme.sh --renew -d example.com --force
 acme.sh --renew -d example.com --force --ecc
 ```
 
+#### 📡 ACME Renewal Information (ARI) — RFC 9773
+
+📖 Wiki: https://github.com/acmesh-official/acme.sh/wiki/ARI
+
+If the CA exposes a `renewalInfo` endpoint in its ACME directory (Let's Encrypt, ZeroSSL, etc.), `acme.sh` follows [RFC 9773](https://www.rfc-editor.org/rfc/rfc9773.html) automatically — **no flag needed, no opt-in**:
+
+| What | When | Why |
+|------|------|-----|
+| 🔍 **Polls `suggestedWindow`** | Every cron run, before deciding to skip | Lets the CA shift the renewal time forward in case of an incident (key compromise, mass revocation, etc.) |
+| 🎯 **Picks a random renewal time** inside the window | Right after a successful issuance/renewal | Disperses renewals across the network so all clients don't hit the CA at the same instant |
+| 🔗 **Sends `replaces=<certID>`** in `newOrder` | On renewal | Lets the CA correlate the new order with the certificate it supersedes (RFC 9773 §5) |
+| ↩️ **Retries without `replaces`** | If the CA rejects with `alreadyReplaced` or an ARI validation error | Robust against edge cases (e.g. switching CAs, retired issuers) |
+
+**Renewal trigger logic:** the cert is renewed if **any one** of the following becomes true:
+
+1. `--force` is given
+2. The CA's **ARI `suggestedWindow` has started**
+3. The cached `Le_NextRenewTime` has passed (default fallback for CAs without ARI)
+
+You can see the resulting next renewal time (already ARI-picked when applicable) in:
+
+```sh
+acme.sh --info -d example.com
+# Look for: Le_NextRenewTimeStr=...
+```
+
+For the live ARI window the CA is currently advertising, run with `--debug 2`:
+
+```sh
+acme.sh --renew -d example.com --debug 2 2>&1 | grep -i 'ARI suggestedWindow'
+```
+
+> 💡 If your CA does not advertise `renewalInfo`, `acme.sh` falls back to the classic 30-day rule — no behavior change.
+
 ---
 
-### 1️⃣3️⃣ How to Stop Certificate Renewal
+### 1️⃣4️⃣ How to Stop Certificate Renewal
 
 To stop renewal of a cert, you can execute the following to remove the cert from the renewal list:
 
@@ -471,7 +603,7 @@ The cert/key file is not removed from the disk.
 
 ---
 
-### 1️⃣4️⃣ How to Upgrade acme.sh
+### 1️⃣5️⃣ How to Upgrade acme.sh
 
 > 🚀 acme.sh is in constant development — it's strongly recommended to use the latest code.
 
@@ -495,25 +627,25 @@ acme.sh --upgrade --auto-upgrade 0
 
 ---
 
-### 1️⃣5️⃣ Issue a Certificate from an Existing CSR
+### 1️⃣6️⃣ Issue a Certificate from an Existing CSR
 
 📚 https://github.com/acmesh-official/acme.sh/wiki/Issue-a-cert-from-existing-CSR
 
 ---
 
-### 1️⃣6️⃣ Send Notifications in Cronjob
+### 1️⃣7️⃣ Send Notifications in Cronjob
 
 📚 https://github.com/acmesh-official/acme.sh/wiki/notify
 
 ---
 
-### 1️⃣7️⃣ Under the Hood
+### 1️⃣8️⃣ Under the Hood
 
 > 🔧 Speak ACME language using shell, directly to "Let's Encrypt".
 
 ---
 
-### 1️⃣8️⃣ Acknowledgments
+### 1️⃣9️⃣ Acknowledgments
 
 | Project | Link |
 |---------|------|
@@ -530,6 +662,8 @@ This project exists thanks to all the people who contribute.
 
 <a href="https://github.com/acmesh-official/acme.sh/graphs/contributors"><img src="https://opencollective.com/acmesh/contributors.svg?width=890&button=false" /></a>
 
+If you want to become a contributor make sure to read [CONTRIBUTING.md](./CONTRIBUTING.md).
+
 ### 💰 Financial Contributors
 
 Become a financial contributor and help us sustain our community. [[Contribute](https://opencollective.com/acmesh/contribute)]
@@ -555,7 +689,7 @@ Support this project with your organization. Your logo will show up here with a
 
 ---
 
-### 1️⃣9️⃣ License & Others
+### 2️⃣0️⃣ License & Others
 
 📄 **License:** GPLv3
 
@@ -565,7 +699,7 @@ Support this project with your organization. Your logo will show up here with a
 
 ---
 
-### 2️⃣0️⃣ Donate
+### 2️⃣1️⃣ Donate
 
 > 💝 Your donation makes **acme.sh** better!
 
@@ -577,7 +711,7 @@ Support this project with your organization. Your logo will show up here with a
 
 ---
 
-### 2️⃣1️⃣ About This Repository
+### 2️⃣2️⃣ About This Repository
 
 > [!NOTE]
 > This repository is officially maintained by <strong>ZeroSSL</strong> as part of our commitment to providing secure and reliable SSL/TLS solutions. We welcome contributions and feedback from the community!  

acme.sh.completion

@@ -0,0 +1,341 @@
+# Bash completion for acme.sh: https://github.com/acmesh-official/acme.sh
+#
+# "acme.sh --install" copies this file to the acme.sh home dir and wires
+# it into acme.sh.env, so the completion is loaded automatically in new
+# bash sessions after installation.
+#
+# To use it without installing acme.sh, source it from ~/.bashrc, or copy
+# it to /usr/share/bash-completion/completions/acme.sh
+#
+# Zsh users can load it with:
+#   autoload -U +X bashcompinit && bashcompinit
+#   . /path/to/acme.sh.completion
+
+# This file may also be sourced by non-bash shells via acme.sh.env,
+# so silently do nothing if the "complete" builtin is not available.
+if ! command -v complete >/dev/null 2>&1; then
+  return 0 2>/dev/null || exit 0
+fi
+
+# Add each word of $1 that starts with $cur to COMPREPLY.
+# The words are read line by line, so that candidates like a wildcard
+# domain "*.example.com" are never glob-expanded against the cwd.
+_acme_sh_add_matches() {
+  local _word
+  while read -r _word; do
+    [ -n "$_word" ] || continue
+    case "$_word" in
+    "$cur"*) COMPREPLY=("${COMPREPLY[@]}" "$_word") ;;
+    esac
+  done <<EOF
+$(printf '%s\n' "$1" | tr ' ' '\n')
+EOF
+  return 0
+}
+
+_acme_sh_files() {
+  local _file
+  while IFS= read -r _file; do
+    [ -n "$_file" ] || continue
+    COMPREPLY=("${COMPREPLY[@]}" "$_file")
+  done <<EOF
+$(compgen -f -- "$cur")
+EOF
+  if command -v compopt >/dev/null 2>&1; then
+    compopt -o filenames 2>/dev/null
+  fi
+  return 0
+}
+
+_acme_sh_dirs() {
+  local _dir
+  while IFS= read -r _dir; do
+    [ -n "$_dir" ] || continue
+    COMPREPLY=("${COMPREPLY[@]}" "$_dir")
+  done <<EOF
+$(compgen -d -- "$cur")
+EOF
+  if command -v compopt >/dev/null 2>&1; then
+    compopt -o filenames 2>/dev/null
+  fi
+  return 0
+}
+
+# Complete the domains that already have a cert: every directory in the
+# config home that contains a "<domain>.conf" file ("_ecc" suffix stripped).
+_acme_sh_domains() {
+  local _dir _name _domains=""
+  [ -n "${ZSH_VERSION:-}" ] && setopt localoptions nonomatch 2>/dev/null
+  for _dir in "$_acme_conf_home"/*/; do
+    [ -d "$_dir" ] || continue
+    _name="${_dir%/}"
+    _name="${_name##*/}"
+    _name="${_name%_ecc}"
+    if [ -f "${_dir}${_name}.conf" ]; then
+      case " $_domains " in
+      *" $_name "*) ;;
+      *) _domains="$_domains $_name" ;;
+      esac
+    fi
+  done
+  _acme_sh_add_matches "$_domains"
+}
+
+# Complete hook names from a subfolder of the acme.sh home dir.
+# $1: subfolder (dnsapi/deploy/notify), $2: file name prefix or empty.
+_acme_sh_hooks() {
+  local _file _hooks=""
+  [ -n "${ZSH_VERSION:-}" ] && setopt localoptions nonomatch 2>/dev/null
+  for _file in "$_acme_home/$1/$2"*.sh; do
+    [ -f "$_file" ] || continue
+    _file="${_file##*/}"
+    _hooks="$_hooks ${_file%.sh}"
+  done
+  _acme_sh_add_matches "$_hooks"
+}
+
+_acme_sh_completion() {
+  local cur prev _acme_home _acme_conf_home
+  COMPREPLY=()
+  cur="${COMP_WORDS[COMP_CWORD]}"
+  prev=""
+  if [ "$COMP_CWORD" -gt 0 ]; then
+    prev="${COMP_WORDS[COMP_CWORD - 1]}"
+  fi
+  _acme_home="${LE_WORKING_DIR:-$HOME/.acme.sh}"
+  _acme_conf_home="${LE_CONFIG_HOME:-$_acme_home}"
+
+  # The first argument is the command.
+  if [ "$COMP_CWORD" -eq 1 ]; then
+    _acme_sh_add_matches "
+      --help
+      --version
+      --install
+      --install-online
+      --uninstall
+      --upgrade
+      --issue
+      --deploy
+      --sign-csr
+      --show-csr
+      --install-cert
+      --renew
+      --renew-all
+      --revoke
+      --remove
+      --list
+      --list-profiles
+      --info
+      --to-pkcs12
+      --to-pkcs8
+      --create-account-key
+      --create-domain-key
+      --create-csr
+      --deactivate
+      --update-account
+      --register-account
+      --deactivate-account
+      --make-dns-persist-value
+      --install-cronjob
+      --uninstall-cronjob
+      --cron
+      --set-notify
+      --set-default-ca
+      --set-default-chain
+      "
+    return 0
+  fi
+
+  # Complete the value of the previous option.
+  case "$prev" in
+  -d | --domain | --challenge-alias | --domain-alias)
+    _acme_sh_domains
+    return 0
+    ;;
+  --dns)
+    # The dns hook argument is optional, keep completing options if the
+    # current word already looks like one.
+    case "$cur" in
+    -*) ;;
+    *)
+      _acme_sh_hooks "dnsapi" "dns_"
+      return 0
+      ;;
+    esac
+    ;;
+  --deploy-hook)
+    _acme_sh_hooks "deploy" ""
+    return 0
+    ;;
+  --notify-hook)
+    _acme_sh_hooks "notify" ""
+    return 0
+    ;;
+  --server)
+    _acme_sh_add_matches "letsencrypt letsencrypt_test zerossl sslcom google google_test actalis"
+    return 0
+    ;;
+  -k | --keylength | -ak | --accountkeylength)
+    _acme_sh_add_matches "2048 3072 4096 8192 ec-256 ec-384 ec-521"
+    return 0
+    ;;
+  --debug)
+    # Optional argument.
+    case "$cur" in
+    -*) ;;
+    *)
+      _acme_sh_add_matches "0 1 2 3"
+      return 0
+      ;;
+    esac
+    ;;
+  --log)
+    # Optional argument.
+    case "$cur" in
+    -*) ;;
+    *)
+      _acme_sh_files
+      return 0
+      ;;
+    esac
+    ;;
+  --nginx)
+    # Optional argument.
+    case "$cur" in
+    -*) ;;
+    *)
+      _acme_sh_files
+      return 0
+      ;;
+    esac
+    ;;
+  --auto-upgrade | --always-force-new-domain-key)
+    # Optional argument.
+    case "$cur" in
+    -*) ;;
+    *)
+      _acme_sh_add_matches "0 1"
+      return 0
+      ;;
+    esac
+    ;;
+  --log-level)
+    _acme_sh_add_matches "1 2"
+    return 0
+    ;;
+  --syslog)
+    _acme_sh_add_matches "0 3 6 7"
+    return 0
+    ;;
+  --notify-level)
+    _acme_sh_add_matches "0 1 2 3"
+    return 0
+    ;;
+  --notify-mode)
+    _acme_sh_add_matches "0 1"
+    return 0
+    ;;
+  --revoke-reason)
+    _acme_sh_add_matches "0 1 2 3 4 5 6 7 8 9 10"
+    return 0
+    ;;
+  --cert-file | --key-file | --ca-file | --fullchain-file | --csr | --accountconf | --accountkey | --ca-bundle | --openssl-bin)
+    _acme_sh_files
+    return 0
+    ;;
+  -w | --webroot | --home | --cert-home | --config-home | --ca-path)
+    _acme_sh_dirs
+    return 0
+    ;;
+  -m | --email | --password | --useragent | --days | --valid-from | --valid-to | --httpport | --tlsport | --local-address | --dnssleep | --pre-hook | --post-hook | --renew-hook | --reloadcmd | --extended-key-usage | -b | --branch | --notify-source | --eab-kid | --eab-hmac-key | --preferred-chain | --cert-profile | --certificate-profile | --dns-persist-ca-name | --dns-persist-days)
+    # These options take a free-form value, offer nothing.
+    return 0
+    ;;
+  esac
+
+  # Complete the parameters.
+  _acme_sh_add_matches "
+    --accountconf
+    --accountkey
+    --accountkeylength
+    --alpn
+    --always-force-new-domain-key
+    --apache
+    --auto-upgrade
+    --branch
+    --ca-bundle
+    --ca-file
+    --ca-path
+    --cert-file
+    --cert-home
+    --cert-profile
+    --challenge-alias
+    --config-home
+    --csr
+    --days
+    --debug
+    --deploy-hook
+    --dns
+    --dns-persist
+    --dns-persist-ca-name
+    --dns-persist-days
+    --dns-persist-wildcard
+    --dnssleep
+    --domain
+    --domain-alias
+    --eab-hmac-key
+    --eab-kid
+    --ecc
+    --email
+    --extended-key-usage
+    --force
+    --force-color
+    --fullchain-file
+    --home
+    --httpport
+    --insecure
+    --key-file
+    --keylength
+    --listen-v4
+    --listen-v6
+    --listraw
+    --local-address
+    --log
+    --log-level
+    --nginx
+    --no-color
+    --no-cron
+    --no-profile
+    --notify-hook
+    --notify-level
+    --notify-mode
+    --notify-source
+    --ocsp-must-staple
+    --openssl-bin
+    --output-insecure
+    --password
+    --post-hook
+    --pre-hook
+    --preferred-chain
+    --reloadcmd
+    --renew-hook
+    --revoke-reason
+    --server
+    --staging
+    --standalone
+    --stateless
+    --stop-renew-on-error
+    --syslog
+    --tlsport
+    --treat-skip-as-success
+    --use-wget
+    --useragent
+    --valid-from
+    --valid-to
+    --webroot
+    --yes-I-know-dns-manual-mode-enough-go-ahead-please
+    "
+  return 0
+}
+
+complete -F _acme_sh_completion acme.sh

allowed_signers

@@ -0,0 +1,22 @@
+# acme.sh release signing key.
+#
+# Release tags are signed with this key. Its private half is held by the
+# maintainer and is never available to CI, so a compromise of the build
+# pipeline cannot produce a tag that verifies against this file.
+#
+# Signing starts at 3.1.6; tags up to 3.1.5 are unsigned.
+#
+# Fingerprint: SHA256:M60qVafm/NUywQHXAkoQcj2v6KgkfrdSXv6mPejUUeE
+#
+# To verify a release tag, from a clone of this repository:
+#
+#   git config gpg.ssh.allowedSignersFile allowed_signers
+#   git verify-tag 3.1.6
+#
+# A good signature covers the tag object, which pins the commit, which pins
+# the whole tree -- so verifying the tag verifies every file at that
+# release. Build a tarball from the verified tag with:
+#
+#   git archive --format=tar.gz --prefix=acme.sh-3.1.6/ 3.1.6 > acme.sh-3.1.6.tar.gz
+#
+github@neilpang.com namespaces="git" ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIBTjI0HBJn3uhfT2DsNcFybfAZi3ADbIacMpz1BItKdB

deploy/baidu_cdn.sh

@@ -0,0 +1,222 @@
+#!/usr/bin/env sh
+# shellcheck disable=SC2034,SC2154
+
+# Deploy hook: Baidu Cloud CDN
+#
+# Code generated by GitHub Copilot with Claude Sonnet 4.6 and OpenAI Codex with GPT-5.6 Sol
+#
+# API Doc:  https://cloud.baidu.com/doc/CDN/s/Zkna2r57w
+#
+# Uses the same credential variables as dnsapi/dns_baidu.sh:
+# export Baidu_AK="your-access-key-id"
+# export Baidu_SK="your-secret-access-key"
+#
+# To deploy to a CDN domain different from the certificate CN
+# (e.g. wildcard or multi-domain certs):
+# export DEPLOY_BAIDU_CDN_DOMAIN="cdn.example.com"
+#
+# Multiple CDN domains sharing the same certificate:
+# export DEPLOY_BAIDU_CDN_DOMAIN="cdn1.example.com cdn2.example.com"
+
+BAIDU_CDN_HOST="cdn.baidubce.com"
+_BAIDU_CDN_BCE_AUTH_RESULT=""
+
+baidu_cdn_deploy() {
+  _cdomain="$1"
+  _ckey="$2"
+  _ccert="$3"
+  _cca="$4"
+  _cfullchain="$5"
+
+  _debug _cdomain "$_cdomain"
+  _debug _ckey "$_ckey"
+  _debug _ccert "$_ccert"
+  _debug _cca "$_cca"
+  _debug _cfullchain "$_cfullchain"
+
+  if ! _baidu_cdn_load_credentials; then
+    return 1
+  fi
+
+  _getdeployconf DEPLOY_BAIDU_CDN_DOMAIN
+  if [ "$DEPLOY_BAIDU_CDN_DOMAIN" ]; then
+    _savedeployconf DEPLOY_BAIDU_CDN_DOMAIN "$DEPLOY_BAIDU_CDN_DOMAIN"
+  else
+    DEPLOY_BAIDU_CDN_DOMAIN="$_cdomain"
+  fi
+
+  # Build JSON "domains" array from space-separated domain list
+  _domains_json=""
+  for _d in $DEPLOY_BAIDU_CDN_DOMAIN; do
+    _d_e="$(_baidu_cdn_json_escape "$_d")"
+    if [ -z "$_domains_json" ]; then
+      _domains_json="\"${_d_e}\""
+    else
+      _domains_json="${_domains_json},\"${_d_e}\""
+    fi
+  done
+
+  # Build a valid cert name: must start with a letter, allow [A-Za-z0-9-/.], max 65 chars
+  _cert_name="$(printf "%s" "$_cdomain" | sed 's/\*\./wildcard./g;s/[^A-Za-z0-9./]/-/g' | cut -c 1-65)"
+  case "$_cert_name" in
+  [A-Za-z]*) ;;
+  *) _cert_name="c${_cert_name}" ;;
+  esac
+
+  # PEM content is already Base64 inside the -----BEGIN/END----- wrappers.
+  # The API expects the raw PEM as a JSON string, so newlines must be escaped as \n.
+  _cert_pem="$(sed 's/$/\\n/' "$_cfullchain" | tr -d '\n')"
+  _key_pem="$(sed 's/$/\\n/' "$_ckey" | tr -d '\n')"
+
+  _debug2 _cert_name "$_cert_name"
+  _debug2 _domains_json "[$_domains_json]"
+
+  # Build JSON payload
+  _payload="{\"domains\":[${_domains_json}],\"certificate\":{\"certName\":\"${_cert_name}\",\"certServerData\":\"${_cert_pem}\",\"certPrivateData\":\"${_key_pem}\"}}"
+
+  # Generate BCE v1 authorization header (query string included in canonical request)
+  _cdn_path="/v2/domain/certificate"
+  _cdn_query="action=put"
+  _ts="$(_utc_date | sed 's/ /T/')Z"
+  _content_type="application/json; charset=utf-8"
+  _payload_hash="$(printf "%s" "$_payload" | _digest sha256 hex)"
+
+  if ! _baidu_cdn_bce_auth "POST" "$_cdn_path" "$_cdn_query" "$BAIDU_CDN_HOST" "$_ts" "3600" "$_content_type" "$_payload_hash"; then
+    _err "Failed to sign request"
+    return 1
+  fi
+
+  _H1="Authorization: $_BAIDU_CDN_BCE_AUTH_RESULT"
+  _H2="x-bce-date: $_ts"
+  _H3="x-bce-content-sha256: $_payload_hash"
+  _H4="Host: $BAIDU_CDN_HOST"
+  _H5=""
+
+  _url="https://${BAIDU_CDN_HOST}${_cdn_path}?${_cdn_query}"
+  response="$(_post "$_payload" "$_url" "" "POST" "$_content_type")"
+  if [ "$?" != "0" ]; then
+    _err "Failed to call Baidu Cloud CDN API"
+    return 1
+  fi
+
+  _debug2 response "$response"
+
+  if _contains "$response" "\"certId\""; then
+    _info "Certificate deployed to Baidu Cloud CDN for: $DEPLOY_BAIDU_CDN_DOMAIN"
+    return 0
+  fi
+
+  _err "Failed to deploy certificate to Baidu Cloud CDN: $response"
+  return 1
+}
+
+# BCE v1 signing with canonical query string support.
+# The CDN endpoint uses ?action=put so it must be included in the canonical request.
+_baidu_cdn_bce_auth() {
+  _method="$1"
+  _uri="$2"
+  _query="$3"
+  _host="$4"
+  _ts="$5"
+  _expire="$6"
+  _ct="$7"
+  _payload_hash="$8"
+
+  _BAIDU_CDN_BCE_AUTH_RESULT=""
+
+  _auth_prefix="bce-auth-v1/${Baidu_AK}/${_ts}/${_expire}"
+  _signed_headers="content-type;host;x-bce-content-sha256;x-bce-date"
+  _canonical_uri="$(_baidu_cdn_bce_encode_path "$_uri")"
+
+  _host_e="$(printf "%s" "$_host" | _url_encode upper-hex)"
+  _date_e="$(printf "%s" "$_ts" | _url_encode upper-hex)"
+  _ct_e="$(printf "%s" "$_ct" | _url_encode upper-hex)"
+  _hash_e="$(printf "%s" "$_payload_hash" | _url_encode upper-hex)"
+
+  _canonical_headers="content-type:${_ct_e}
+host:${_host_e}
+x-bce-content-sha256:${_hash_e}
+x-bce-date:${_date_e}"
+
+  _canonical_request="${_method}
+${_canonical_uri}
+${_query}
+${_canonical_headers}"
+
+  _sk_hex="$(printf "%s" "$Baidu_SK" | _hex_dump | tr -d " ")"
+  _signing_key="$(_baidu_cdn_hmac_sha256_hexkey "$_sk_hex" "$_auth_prefix")"
+  _signing_key_hex="$(printf "%s" "$_signing_key" | _hex_dump | tr -d " ")"
+  _signature="$(_baidu_cdn_hmac_sha256_hexkey "$_signing_key_hex" "$_canonical_request")"
+
+  _BAIDU_CDN_BCE_AUTH_RESULT="${_auth_prefix}/${_signed_headers}/${_signature}"
+}
+
+_baidu_cdn_load_credentials() {
+  Baidu_AK="${Baidu_AK:-$(_readaccountconf_mutable Baidu_AK)}"
+  Baidu_SK="${Baidu_SK:-$(_readaccountconf_mutable Baidu_SK)}"
+
+  Baidu_AK="$(_baidu_cdn_trim_ws "$Baidu_AK")"
+  Baidu_SK="$(_baidu_cdn_trim_ws "$Baidu_SK")"
+
+  if [ -z "$Baidu_AK" ] || [ -z "$Baidu_SK" ]; then
+    _err "Baidu_AK and Baidu_SK are required"
+    return 1
+  fi
+
+  _saveaccountconf_mutable Baidu_AK "$Baidu_AK"
+  _saveaccountconf_mutable Baidu_SK "$Baidu_SK"
+
+  return 0
+}
+
+_baidu_cdn_bce_encode_path() {
+  _p="$1"
+  _out=""
+  if [ "${_p#"/"}" != "$_p" ]; then
+    _out="/"
+  fi
+
+  _rest="${_p#/}"
+  while [ -n "$_rest" ]; do
+    _seg="${_rest%%/*}"
+    if [ "$_seg" ]; then
+      if [ -z "$_out" ] || [ "$_out" = "/" ]; then
+        _out="${_out}$(printf "%s" "$_seg" | _url_encode upper-hex)"
+      else
+        _out="${_out}/$(printf "%s" "$_seg" | _url_encode upper-hex)"
+      fi
+    fi
+    if [ "${_rest#*/}" = "$_rest" ]; then
+      break
+    fi
+    _rest="${_rest#*/}"
+  done
+
+  if [ -z "$_out" ]; then
+    _out="/"
+  fi
+  printf "%s" "$_out"
+}
+
+_baidu_cdn_trim_ws() {
+  printf "%s" "$1" | tr '\r\n\t' '   ' | tr -s ' ' | sed 's/^ *//;s/ *$//'
+}
+
+_baidu_cdn_json_escape() {
+  _s="$1"
+  _s="$(printf "%s" "$_s" | tr -d '\r\n')"
+  printf "%s" "$_s" |
+    sed 's/\\/\\\\/g; s/	/\\t/g' |
+    _baidu_cdn_json_encode
+}
+
+_baidu_cdn_json_encode() {
+  _j_str="$(sed 's/"/\\"/g' | sed "s/\r/\\r/g")"
+  printf "%s" "$_j_str" | _hex_dump | _lower_case | sed 's/0a/5c 6e/g' | tr -d ' ' | _h2b | tr -d "\r\n"
+}
+
+_baidu_cdn_hmac_sha256_hexkey() {
+  _key_hex="$1"
+  _msg="$2"
+  printf "%s" "$_msg" | _hmac sha256 "$_key_hex" hex
+}

deploy/byteplus_alb.sh

@@ -163,8 +163,8 @@ byteplus_alb_deploy() {
   # ── 3. Read cert and key ─────────────────────────────────────────────────────
   # BytePlus requires NO blank lines between PEM blocks in the certificate chain
 
-  _public_key=$(sed '/^[[:space:]]*$/d' "$_cfullchain" | tr -d '\r')
-  _private_key=$(sed '/^[[:space:]]*$/d' "$_ckey" | tr -d '\r')
+  _public_key=$(_strip_blank_lines <"$_cfullchain" | tr -d '\r')
+  _private_key=$(_strip_blank_lines <"$_ckey" | tr -d '\r')
 
   if [ -z "$_public_key" ] || [ -z "$_private_key" ]; then
     _err "Failed to read certificate or key file."

deploy/cpanel_uapi.sh

@@ -52,7 +52,15 @@ cpanel_uapi_deploy() {
 
   # read cert and key files and urlencode both
   _cert=$(_url_encode <"$_ccert")
-  _key=$(_url_encode <"$_ckey")
+  # with --signcsr the private key was never handed to acme.sh, so the key
+  # file does not exist; skip it instead of spilling a shell redirection
+  # error on every renewal (cPanel keeps using the already-installed key)
+  if [ -f "$_ckey" ]; then
+    _key=$(_url_encode <"$_ckey")
+  else
+    _debug "Key file $_ckey does not exist (csr mode), not sending a key."
+    _key=""
+  fi
 
   _debug2 _cert "$_cert"
   _debug2 _key "$_key"
@@ -79,7 +87,11 @@ cpanel_uapi_deploy() {
   # Auto mode
   if [ "$DEPLOY_CPANEL_AUTO_ENABLED" = "true" ]; then
     # call API for site config
-    _response=$(uapi DomainInfo list_domains)
+    if [ -n "$_uapi_user" ]; then
+      _response=$(uapi --user="$_uapi_user" DomainInfo list_domains)
+    else
+      _response=$(uapi DomainInfo list_domains)
+    fi
     # exit if error in response
     if [ -z "$_response" ] || [ "${_response#*"$uapi_error_response"}" != "$_response" ]; then
       _err "Error in deploying certificate - cannot retrieve sitelist:"
@@ -194,7 +206,8 @@ __cpanel_parse_response() {
         printf("%s%s=%s\n", prefix, $2, $3);
       }
     }' |
-    sed -En -e 's/^result\/data\/(main_domain|sub_domains\/-|addon_domains\/-|parked_domains\/-)=(.*)$/\2/p'
+    sed -En -e 's/^result\/data\/(main_domain|sub_domains\/-|addon_domains\/-|parked_domains\/-)=(.*)$/\2/p' |
+    sed -e 's/^"//' -e 's/"$//' # YAML double-quotes values starting with '*' (wildcard subdomains)
 }
 
 # Load parameter by prefix+name - fallback to default if not set, and save to config

deploy/docker.sh

@@ -3,6 +3,8 @@
 #DEPLOY_DOCKER_CONTAINER_LABEL="xxxxxxx"
 
 #DEPLOY_DOCKER_CONTAINER_KEY_FILE="/path/to/key.pem"
+#DEPLOY_DOCKER_CONTAINER_KEY_MODE="0640"
+#DEPLOY_DOCKER_CONTAINER_KEY_OWNER="1000:1000"
 #DEPLOY_DOCKER_CONTAINER_CERT_FILE="/path/to/cert.pem"
 #DEPLOY_DOCKER_CONTAINER_CA_FILE="/path/to/ca.pem"
 #DEPLOY_DOCKER_CONTAINER_FULLCHAIN_FILE="/path/to/fullchain.pem"
@@ -71,6 +73,18 @@ docker_deploy() {
     _savedeployconf DEPLOY_DOCKER_CONTAINER_KEY_FILE "$DEPLOY_DOCKER_CONTAINER_KEY_FILE"
   fi
 
+  _getdeployconf DEPLOY_DOCKER_CONTAINER_KEY_MODE
+  _debug2 DEPLOY_DOCKER_CONTAINER_KEY_MODE "$DEPLOY_DOCKER_CONTAINER_KEY_MODE"
+  if [ "$DEPLOY_DOCKER_CONTAINER_KEY_MODE" ]; then
+    _savedeployconf DEPLOY_DOCKER_CONTAINER_KEY_MODE "$DEPLOY_DOCKER_CONTAINER_KEY_MODE"
+  fi
+
+  _getdeployconf DEPLOY_DOCKER_CONTAINER_KEY_OWNER
+  _debug2 DEPLOY_DOCKER_CONTAINER_KEY_OWNER "$DEPLOY_DOCKER_CONTAINER_KEY_OWNER"
+  if [ "$DEPLOY_DOCKER_CONTAINER_KEY_OWNER" ]; then
+    _savedeployconf DEPLOY_DOCKER_CONTAINER_KEY_OWNER "$DEPLOY_DOCKER_CONTAINER_KEY_OWNER"
+  fi
+
   _getdeployconf DEPLOY_DOCKER_CONTAINER_CERT_FILE
   _debug2 DEPLOY_DOCKER_CONTAINER_CERT_FILE "$DEPLOY_DOCKER_CONTAINER_CERT_FILE"
   if [ "$DEPLOY_DOCKER_CONTAINER_CERT_FILE" ]; then
@@ -112,6 +126,20 @@ docker_deploy() {
     if ! _docker_cp "$_cid" "$_ckey" "$DEPLOY_DOCKER_CONTAINER_KEY_FILE"; then
       return 1
     fi
+    if [ "$DEPLOY_DOCKER_CONTAINER_KEY_OWNER" ]; then
+      _info "Setting key file owner to $DEPLOY_DOCKER_CONTAINER_KEY_OWNER"
+      if ! _docker_exec "$_cid" chown "$DEPLOY_DOCKER_CONTAINER_KEY_OWNER" "$DEPLOY_DOCKER_CONTAINER_KEY_FILE"; then
+        _err "Can not change owner of key file in container"
+        return 1
+      fi
+    fi
+    if [ "$DEPLOY_DOCKER_CONTAINER_KEY_MODE" ]; then
+      _info "Setting key file mode to $DEPLOY_DOCKER_CONTAINER_KEY_MODE"
+      if ! _docker_exec "$_cid" chmod "$DEPLOY_DOCKER_CONTAINER_KEY_MODE" "$DEPLOY_DOCKER_CONTAINER_KEY_FILE"; then
+        _err "Can not change mode of key file in container"
+        return 1
+      fi
+    fi
   fi
 
   if [ "$DEPLOY_DOCKER_CONTAINER_CERT_FILE" ]; then
@@ -189,10 +217,22 @@ _docker_exec() {
     _debug2 cjson "$cjson"
     execid="$(echo "$cjson" | cut -d '"' -f 4)"
     _debug execid "$execid"
-    ejson="$(_curl_unix_sock "$_DOCKER_SOCK" POST "/exec/$execid/start" "{\"Detach\": false,\"Tty\": false}")"
+    #Detach:true is required for podman's docker-compatible API: with
+    #Detach:false it streams the command output on the connection, so the
+    #non-empty response was misread as an error (issue #4977). The real
+    #result is checked via the exec inspect ExitCode below instead.
+    ejson="$(_curl_unix_sock "$_DOCKER_SOCK" POST "/exec/$execid/start" "{\"Detach\": true,\"Tty\": false}")"
     _debug2 ejson "$ejson"
-    if [ "$ejson" ]; then
-      _err "$ejson"
+    _et=0
+    ijson="$(_curl_unix_sock "$_DOCKER_SOCK" GET "/exec/$execid/json")"
+    while _contains "$ijson" "\"Running\":true" && [ "$_et" -lt 10 ]; do
+      sleep 1
+      _et="$(_math "$_et" + 1)"
+      ijson="$(_curl_unix_sock "$_DOCKER_SOCK" GET "/exec/$execid/json")"
+    done
+    _debug2 ijson "$ijson"
+    if ! echo "$ijson" | _egrep_o "\"ExitCode\": *0[,}]" >/dev/null 2>&1; then
+      _err "docker exec error: $ijson"
       return 1
     fi
   else

deploy/fortigate.sh

@@ -0,0 +1,175 @@
+#!/usr/bin/env sh
+# Script to deploy a certificate to FortiGate via API and set it as the current web GUI certificate.
+#
+# FortiGate's native ACME integration does not support wildcard certificates or domain validation,
+# and is not supported if you have a custom management web port (eg. DNAT web traffic).
+#
+# REQUIRED:
+#     export FGT_HOST="fortigate_hostname-or-ip"
+#     export FGT_TOKEN="fortigate_api_token"
+#
+# OPTIONAL:
+#     export FGT_PORT="10443"             # Custom HTTPS port (defaults to 443 if not set)
+#
+# Run `acme.sh --deploy -d example.com --deploy-hook fortigate --insecure` to use this script.
+# `--insecure` is required on first run if not already using a valid SSL certificate on firewall.
+
+# Function to parse a FortiGate API response
+_fortigate_parse_response() {
+  _fortigate_response="$1"
+  _fortigate_func="$2"
+  _fortigate_status=$(echo "$_fortigate_response" | _egrep_o '"status":[ ]*"[^"]*"' | cut -d '"' -f 4)
+
+  if [ "$_fortigate_status" != "success" ]; then
+    _err "[$_fortigate_func] Operation failed. Deploy with --insecure if current certificate is invalid. Try deploying with --debug to troubleshoot."
+    return 1
+  fi
+
+  _debug "[$_fortigate_func] Operation successful."
+  return 0
+}
+
+# Function to deploy a base64-encoded certificate to the firewall
+_fortigate_deployer() {
+  _fortigate_cert_base64=$(_base64 <"$_fortigate_cfullchain" | tr -d '\n')
+  _fortigate_key_base64=$(_base64 <"$_fortigate_ckey" | tr -d '\n')
+  _fortigate_payload=$(
+    cat <<EOF
+{
+  "type": "regular",
+  "scope": "global",
+  "certname": "$_fortigate_cert_name",
+  "key_file_content": "$_fortigate_key_base64",
+  "file_content": "$_fortigate_cert_base64"
+}
+EOF
+  )
+
+  _fortigate_url="https://${FGT_HOST}:${FGT_PORT}/api/v2/monitor/vpn-certificate/local/import"
+  _debug "Uploading certificate via URL: $_fortigate_url"
+
+  _H1="Authorization: Bearer $FGT_TOKEN"
+  _fortigate_response=$(_post "$_fortigate_payload" "$_fortigate_url" "" "POST" "application/json")
+  _debug "FortiGate API Response: $_fortigate_response"
+
+  _fortigate_parse_response "$_fortigate_response" "Deploying certificate" || return 1
+}
+
+# Function to upload a CA certificate to the firewall
+# FortiGate does not automatically extract the CA from the full chain.
+_fortigate_upload_ca_cert() {
+  _fortigate_ca_base64=$(_base64 <"$_fortigate_cca" | tr -d '\n')
+  _fortigate_payload=$(
+    cat <<EOF
+{
+  "import_method": "file",
+  "scope": "global",
+  "file_content": "$_fortigate_ca_base64"
+}
+EOF
+  )
+
+  _fortigate_url="https://${FGT_HOST}:${FGT_PORT}/api/v2/monitor/vpn-certificate/ca/import"
+  _debug "Uploading CA certificate via URL: $_fortigate_url"
+
+  _H1="Authorization: Bearer $FGT_TOKEN"
+  _fortigate_response=$(_post "$_fortigate_payload" "$_fortigate_url" "" "POST" "application/json")
+  _debug "FortiGate API CA Response: $_fortigate_response"
+
+  # FortiGate error -328 means that the CA certificate already exists.
+  if echo "$_fortigate_response" | grep -q '"error":[ ]*-328'; then
+    _debug "CA certificate already exists. Skipping CA upload."
+    return 0
+  fi
+
+  _fortigate_parse_response "$_fortigate_response" "Deploying CA certificate" || return 1
+}
+
+# Function to activate the new certificate
+_fortigate_set_active_web_cert() {
+  _fortigate_payload=$(
+    cat <<EOF
+{
+  "admin-server-cert": "$_fortigate_cert_name"
+}
+EOF
+  )
+
+  _fortigate_url="https://${FGT_HOST}:${FGT_PORT}/api/v2/cmdb/system/global"
+  _debug "Setting GUI certificate..."
+
+  _H1="Authorization: Bearer $FGT_TOKEN"
+  _fortigate_response=$(_post "$_fortigate_payload" "$_fortigate_url" "" "PUT" "application/json")
+
+  _fortigate_parse_response "$_fortigate_response" "Assigning active certificate" || return 1
+}
+
+# Function to clean up the previously deployed certificate
+_fortigate_cleanup_previous_certificate() {
+  _getdeployconf FGT_LAST_CERT
+
+  if [ -n "$FGT_LAST_CERT" ] && [ "$FGT_LAST_CERT" != "$_fortigate_cert_name" ]; then
+    _debug "Found previously deployed certificate: $FGT_LAST_CERT. Deleting it."
+
+    _fortigate_url="https://${FGT_HOST}:${FGT_PORT}/api/v2/cmdb/vpn.certificate/local/${FGT_LAST_CERT}"
+    _H1="Authorization: Bearer $FGT_TOKEN"
+    _fortigate_response=$(_post "" "$_fortigate_url" "" "DELETE" "application/json")
+    _debug "Delete certificate API response: $_fortigate_response"
+
+    _fortigate_parse_response "$_fortigate_response" "Delete previous certificate" || return 1
+  else
+    _debug "No previous certificate found."
+  fi
+}
+
+# Main deploy-hook function
+fortigate_deploy() {
+  # Include date and time to ensure unique names.
+  _fortigate_cert_name="$(echo "$1" | sed 's/*/WILDCARD_/g')_$(date -u +"%Y-%m-%d_%H-%M-%S")"
+  _fortigate_ckey="$2"
+  _fortigate_cca="$4"
+  _fortigate_cfullchain="$5"
+
+  if [ ! -f "$_fortigate_ckey" ] || [ ! -f "$_fortigate_cfullchain" ]; then
+    _err "Valid key and/or certificate not found."
+    return 1
+  fi
+
+  # Save required environment variables if set; otherwise load saved values.
+  for _fortigate_var in FGT_HOST FGT_TOKEN FGT_PORT; do
+    if [ -n "$(eval echo "\$$_fortigate_var")" ]; then
+      _debug "Detected ENV variable $_fortigate_var. Saving to file."
+      _savedeployconf "$_fortigate_var" "$(eval echo "\$$_fortigate_var")" 1
+    else
+      _debug "Attempting to load variable $_fortigate_var from file."
+      _getdeployconf "$_fortigate_var"
+    fi
+  done
+
+  if [ -z "$FGT_HOST" ] || [ -z "$FGT_TOKEN" ]; then
+    _err "FGT_HOST and FGT_TOKEN must be set."
+    return 1
+  fi
+
+  FGT_PORT="${FGT_PORT:-443}"
+  _debug "Using FortiGate port: $FGT_PORT"
+
+  # Upload the new certificate.
+  _fortigate_deployer || return 1
+
+  # Upload the CA certificate.
+  if [ -n "$_fortigate_cca" ] && [ -f "$_fortigate_cca" ]; then
+    _fortigate_upload_ca_cert || return 1
+  else
+    _debug "No CA certificate provided."
+  fi
+
+  # Activate the new certificate.
+  _fortigate_set_active_web_cert || return 1
+
+  # Delete the previously deployed certificate only after successful activation.
+  _fortigate_cleanup_previous_certificate || return 1
+
+  # Save the new certificate name for cleanup during the next deployment.
+  _savedeployconf "FGT_LAST_CERT" "$_fortigate_cert_name" 1
+}

deploy/fritzbox.sh

@@ -74,9 +74,9 @@ fritzbox_deploy() {
   _info "Log in to the FRITZ!Box"
   _fritzbox_challenge="$(_get "${DEPLOY_FRITZBOX_URL}/login_sid.lua" | sed -e 's/^.*<Challenge>//' -e 's/<\/Challenge>.*$//')"
   if _exists iconv; then
-    _fritzbox_hash="$(printf "%s-%s" "${_fritzbox_challenge}" "${DEPLOY_FRITZBOX_PASSWORD}" | iconv -f ASCII -t UTF16LE | _digest md5 hex)"
+    _fritzbox_hash="$(printf "%s-%s" "${_fritzbox_challenge}" "${DEPLOY_FRITZBOX_PASSWORD}" | iconv -f ASCII -t UTF-16LE | _digest md5 hex)"
   elif _exists uconv; then
-    _fritzbox_hash="$(printf "%s-%s" "${_fritzbox_challenge}" "${DEPLOY_FRITZBOX_PASSWORD}" | uconv -f ASCII -t UTF16LE | _digest md5 hex)"
+    _fritzbox_hash="$(printf "%s-%s" "${_fritzbox_challenge}" "${DEPLOY_FRITZBOX_PASSWORD}" | uconv -f ASCII -t UTF-16LE | _digest md5 hex)"
   else
     _fritzbox_hash="$(printf "%s-%s" "${_fritzbox_challenge}" "${DEPLOY_FRITZBOX_PASSWORD}" | perl -p -e 'use Encode qw/encode/; print encode("UTF-16LE","$_"); $_="";' | _digest md5 hex)"
   fi

deploy/gcore_cdn.sh

@@ -57,7 +57,7 @@ gcore_cdn_deploy() {
   _request="{\"username\":\"$Le_Deploy_gcore_cdn_username\",\"password\":\"$Le_Deploy_gcore_cdn_password\"}"
   _debug _request "$_request"
   export _H1="Content-Type:application/json"
-  _response=$(_post "$_request" "https://api.gcore.com/auth/jwt/login")
+  _response=$(_post "$_request" "https://api.gcore.com/iam/auth/jwt/login")
   _debug _response "$_response"
   _regex=".*\"access\":\"\([-._0-9A-Za-z]*\)\".*$"
   _debug _regex "$_regex"

deploy/haproxy.sh

@@ -43,7 +43,8 @@
 # needing to reload HAProxy. Default is "no".
 #
 # Require the socat binary. DEPLOY_HAPROXY_STATS_SOCKET variable uses the socat
-# address format.
+# address format. The certificate can be deployed to a comma separated ',' list
+# of hosts ("TCP4:10.0.0.1:1999,TCP4:10.0.0.2:1999")
 #
 # export DEPLOY_HAPROXY_MASTER_CLI="UNIX:/run/haproxy-master.sock"
 #
@@ -172,10 +173,7 @@ haproxy_deploy() {
   # Set the suffix depending if we are creating a bundle or not
   if [ "${Le_Deploy_haproxy_bundle}" = "yes" ]; then
     _info "Bundle creation requested"
-    # Initialise $Le_Keylength if its not already set
-    if [ -z "${Le_Keylength}" ]; then
-      Le_Keylength=""
-    fi
+    # shellcheck disable=SC2154 # Le_Keylength is set by acme.sh core, not this hook
     if _isEccKey "${Le_Keylength}"; then
       _info "ECC key type detected"
       _suffix=".ecdsa"
@@ -193,7 +191,6 @@ haproxy_deploy() {
   _issuer="${_pem}.issuer"
   _ocsp="${_pem}.ocsp"
   _reload="${Le_Deploy_haproxy_reload}"
-  _statssock="${Le_Deploy_haproxy_stats_socket}"
 
   _info "Deploying PEM file"
   # Create a temporary PEM file
@@ -272,12 +269,18 @@ haproxy_deploy() {
           _cafile_argument=""
         fi
         _debug _cafile_argument "${_cafile_argument}"
-        # if OpenSSL/LibreSSL is v1.1 or above, the format for the -header option has changed
+        # OpenSSL 1.1+ expects -header Host=value (one argument), while
+        # LibreSSL keeps the old two-argument form -header Host value at any
+        # version (3.x/4.x), so it must be detected by name, not by number.
+        _openssl_name=$(${ACME_OPENSSL_BIN:-openssl} version | cut -d' ' -f1)
         _openssl_version=$(${ACME_OPENSSL_BIN:-openssl} version | cut -d' ' -f2)
+        _debug _openssl_name "${_openssl_name}"
         _debug _openssl_version "${_openssl_version}"
         _openssl_major=$(echo "${_openssl_version}" | cut -d '.' -f1)
         _openssl_minor=$(echo "${_openssl_version}" | cut -d '.' -f2)
-        if [ "${_openssl_major}" -eq "1" ] && [ "${_openssl_minor}" -ge "1" ] || [ "${_openssl_major}" -ge "2" ]; then
+        if [ "${_openssl_name}" = "LibreSSL" ]; then
+          _header_sep=" "
+        elif [ "${_openssl_major}" -eq "1" ] && [ "${_openssl_minor}" -ge "1" ] || [ "${_openssl_major}" -ge "2" ]; then
           _header_sep="="
         else
           _header_sep=" "
@@ -327,62 +330,67 @@ haproxy_deploy() {
 
     # Update certificate over HAProxy stats socket or master CLI.
     if _exists socat; then
-      # look for the certificate on the stats socket, to chose between updating or creating one
-      _socat_cert_cmd="echo '${_cmdpfx}show ssl cert' | socat '${_statssock}' - | grep -q '^${_pem}$'"
-      _debug _socat_cert_cmd "${_socat_cert_cmd}"
-      eval "${_socat_cert_cmd}"
-      _ret=$?
-      if [ "${_ret}" != "0" ]; then
-        _newcert="1"
-        _info "Creating new certificate '${_pem}' over HAProxy ${_socketname}."
-        # certificate wasn't found, it's a new one. We should check if the crt-list exists and creates/inserts the certificate.
-        _socat_crtlist_show_cmd="echo '${_cmdpfx}show ssl crt-list' | socat '${_statssock}' - | grep -q '^${Le_Deploy_haproxy_pem_path}$'"
-        _debug _socat_crtlist_show_cmd "${_socat_crtlist_show_cmd}"
-        eval "${_socat_crtlist_show_cmd}"
+      IFS=','
+      for _statssock in ${Le_Deploy_haproxy_stats_socket}; do
+        # look for the certificate on the stats socket, to choose between updating or creating one
+        _socat_cert_cmd="echo '${_cmdpfx}show ssl cert' | socat '${_statssock}' - | grep -q '^${_pem}$'"
+        _debug _socat_cert_cmd "${_socat_cert_cmd}"
+        eval "${_socat_cert_cmd}"
         _ret=$?
         if [ "${_ret}" != "0" ]; then
-          _err "Couldn't find '${Le_Deploy_haproxy_pem_path}' in haproxy 'show ssl crt-list'"
-          return "${_ret}"
+          _newcert="1"
+          _info "Creating new certificate '${_pem}' over HAProxy ${_socketname}."
+          # certificate wasn't found, it's a new one. We should check if the crt-list exists and creates/inserts the certificate.
+          _socat_crtlist_show_cmd="echo '${_cmdpfx}show ssl crt-list' | socat '${_statssock}' - | grep -q '^${Le_Deploy_haproxy_pem_path}$'"
+          _debug _socat_crtlist_show_cmd "${_socat_crtlist_show_cmd}"
+          eval "${_socat_crtlist_show_cmd}"
+          _ret=$?
+          if [ "${_ret}" != "0" ]; then
+            _err "Couldn't find '${Le_Deploy_haproxy_pem_path}' in haproxy 'show ssl crt-list'"
+            return "${_ret}"
+          fi
+          # create a new certificate
+          _socat_new_cmd="echo '${_cmdpfx}new ssl cert ${_pem}' | socat '${_statssock}' - | grep -q 'New empty'"
+          _debug _socat_new_cmd "${_socat_new_cmd}"
+          eval "${_socat_new_cmd}"
+          _ret=$?
+          if [ "${_ret}" != "0" ]; then
+            _err "Couldn't create '${_pem}' in haproxy"
+            return "${_ret}"
+          fi
+        else
+          _info "Update existing certificate '${_pem}' over HAProxy ${_socketname}."
         fi
-        # create a new certificate
-        _socat_new_cmd="echo '${_cmdpfx}new ssl cert ${_pem}' | socat '${_statssock}' - | grep -q 'New empty'"
-        _debug _socat_new_cmd "${_socat_new_cmd}"
-        eval "${_socat_new_cmd}"
-        _ret=$?
-        if [ "${_ret}" != "0" ]; then
-          _err "Couldn't create '${_pem}' in haproxy"
-          return "${_ret}"
-        fi
-      else
-        _info "Update existing certificate '${_pem}' over HAProxy ${_socketname}."
-      fi
-      _socat_cert_set_cmd="echo -e '${_cmdpfx}set ssl cert ${_pem} <<\n$(cat "${_pem}")\n' | socat '${_statssock}' - | grep -q 'Transaction created'"
-      _secure_debug _socat_cert_set_cmd "${_socat_cert_set_cmd}"
-      eval "${_socat_cert_set_cmd}"
-      _ret=$?
-      if [ "${_ret}" != "0" ]; then
-        _err "Can't update '${_pem}' in haproxy"
-        return "${_ret}"
-      fi
-      _socat_cert_commit_cmd="echo '${_cmdpfx}commit ssl cert ${_pem}' | socat '${_statssock}' - | grep -q '^Success!$'"
-      _debug _socat_cert_commit_cmd "${_socat_cert_commit_cmd}"
-      eval "${_socat_cert_commit_cmd}"
-      _ret=$?
-      if [ "${_ret}" != "0" ]; then
-        _err "Can't commit '${_pem}' in haproxy"
-        return ${_ret}
-      fi
-      if [ "${_newcert}" = "1" ]; then
-        # if this is a new certificate, it needs to be inserted into the crt-list`
-        _socat_cert_add_cmd="echo '${_cmdpfx}add ssl crt-list ${Le_Deploy_haproxy_pem_path} ${_pem}' | socat '${_statssock}' - | grep -q 'Success!'"
-        _debug _socat_cert_add_cmd "${_socat_cert_add_cmd}"
-        eval "${_socat_cert_add_cmd}"
+        # printf %b, not "echo -e": dash's echo has no -e and sends a literal "-e " to the socket.
+        # "Transaction updated" is replied instead of "created" when an uncommitted transaction exists.
+        _socat_cert_set_cmd="printf '%b\n' '${_cmdpfx}set ssl cert ${_pem} <<\n$(cat "${_pem}")\n' | socat '${_statssock}' - | grep -qE 'Transaction (created|updated)'"
+        _secure_debug _socat_cert_set_cmd "${_socat_cert_set_cmd}"
+        eval "${_socat_cert_set_cmd}"
         _ret=$?
         if [ "${_ret}" != "0" ]; then
           _err "Can't update '${_pem}' in haproxy"
           return "${_ret}"
         fi
-      fi
+        _socat_cert_commit_cmd="echo '${_cmdpfx}commit ssl cert ${_pem}' | socat '${_statssock}' - | grep -q '^Success!$'"
+        _debug _socat_cert_commit_cmd "${_socat_cert_commit_cmd}"
+        eval "${_socat_cert_commit_cmd}"
+        _ret=$?
+        if [ "${_ret}" != "0" ]; then
+          _err "Can't commit '${_pem}' in haproxy"
+          return ${_ret}
+        fi
+        if [ "${_newcert}" = "1" ]; then
+          # if this is a new certificate, it needs to be inserted into the crt-list`
+          _socat_cert_add_cmd="echo '${_cmdpfx}add ssl crt-list ${Le_Deploy_haproxy_pem_path} ${_pem}' | socat '${_statssock}' - | grep -q 'Success!'"
+          _debug _socat_cert_add_cmd "${_socat_cert_add_cmd}"
+          eval "${_socat_cert_add_cmd}"
+          _ret=$?
+          if [ "${_ret}" != "0" ]; then
+            _err "Can't update '${_pem}' in haproxy"
+            return "${_ret}"
+          fi
+        fi
+      done
     else
       _err "'socat' is not available, couldn't update over ${_socketname}"
     fi

deploy/ikuai.sh

@@ -0,0 +1,114 @@
+#!/usr/bin/env sh
+
+# Here is a script to deploy cert to ikuai using curl
+#
+# it requires following environment variables:
+#
+# IKUAI_SCHEME="http"           - http or https , defaults to "http"
+# IKUAI_HOSTNAME="localhost"    - host , defaults to "192.168.9.1"
+# IKUAI_PORT="80"               - port , defaults to "80"
+# IKUAI_USERNAME="admin"        - username , defaults to "admin"
+# IKUAI_PASSWORD="yourPassword" - password
+# IKUAI_CERT_ID=1               - ikuai cert id , defaults to 1, and only 1 is supported for now !!!
+#
+#returns 0 means success, otherwise error.
+#
+########  Public functions #####################
+#
+#domain keyfile certfile cafile fullchain
+ikuai_deploy() {
+  _cdomain="$1"
+  _ckey="$2"
+  _ccert="$3"
+  _cca="$4"
+  _cfullchain="$5"
+
+  _debug _cdomain "$_cdomain"
+  _debug _ckey "$_ckey"
+  _debug _ccert "$_ccert"
+  _debug _cca "$_cca"
+  _debug _cfullchain "$_cfullchain"
+
+  # Get deploy conf
+  _getdeployconf IKUAI_SCHEME
+  _getdeployconf IKUAI_HOSTNAME
+  _getdeployconf IKUAI_PORT
+  _getdeployconf IKUAI_USERNAME
+  _getdeployconf IKUAI_PASSWORD
+  _getdeployconf IKUAI_CERT_ID
+
+  # Use default if not provided
+  [ -n "$IKUAI_SCHEME" ] || IKUAI_SCHEME="http"
+  [ -n "$IKUAI_HOSTNAME" ] || IKUAI_HOSTNAME="192.168.9.1"
+  [ -n "$IKUAI_PORT" ] || IKUAI_PORT=80
+  [ -n "$IKUAI_USERNAME" ] || IKUAI_USERNAME="admin"
+  [ -n "$IKUAI_CERT_ID" ] || IKUAI_CERT_ID=1
+
+  if [ -z "$IKUAI_PASSWORD" ]; then
+    _err "please define IKUAI_PASSWORD."
+    return 1
+  fi
+
+  _debug2 IKUAI_SCHEME "$IKUAI_SCHEME"
+  _debug2 IKUAI_HOSTNAME "$IKUAI_HOSTNAME"
+  _debug2 IKUAI_PORT "$IKUAI_PORT"
+  _debug2 IKUAI_USERNAME "$IKUAI_USERNAME"
+  _secure_debug2 IKUAI_PASSWORD "$IKUAI_PASSWORD"
+
+  _info "Login to ikuai ..."
+  _ikuai_url="$IKUAI_SCHEME://$IKUAI_HOSTNAME:$IKUAI_PORT"
+  _pass_md5="$(printf "%s" "$IKUAI_PASSWORD" | _digest md5 hex | _lower_case)"
+  _pass_salt="$(printf "salt_11%s" "$IKUAI_PASSWORD" | _base64)"
+  _debug2 _ikuai_url "$_ikuai_url"
+
+  _login_req="{\"username\":\"$IKUAI_USERNAME\",\"passwd\":\"$_pass_md5\",\"pass\":\"$_pass_salt\",\"remember_password\":\"\"}"
+  _response=$(_post "$_login_req" "$_ikuai_url/Action/login" "" "POST" "application/json")
+
+  _err_msg="$(printf "%s" "$_response" | _normalizeJson | _egrep_o '"ErrMsg":"[^"]*"' | cut -d'"' -f 4)"
+  # check ErrMsg
+  if [ "$_err_msg" != "Success" ]; then
+    _err "Failed to login to ikuai: $_err_msg"
+    return 1
+  fi
+  # check cookie
+  _cookie="$(grep -i '^set-cookie:' "$HTTP_HEADER" | _head_n 1 | cut -d " " -f 2 | sed 's/;.*//')"
+  if [ -z "$_cookie" ]; then
+    _err "Fail to get the cookie."
+    return 1
+  fi
+
+  # Set cookie header
+  _H1="Cookie: $_cookie; username=$IKUAI_USERNAME; login=1"
+
+  _info "Deploy the cert to ikuai ... "
+
+  # Should replace \n to @ ," " to #
+  _cert_content_single_line="$(tr <"$_cfullchain" '\n' '@' | tr ' ' '#')"
+  _key_content_single_line="$(tr <"$_ckey" '\n' '@' | tr ' ' '#')"
+
+  _debug2 _cert_content_single_line "$_cert_content_single_line"
+  _secure_debug2 _key_content_single_line "$_key_content_single_line"
+
+  _key_manager_req="{\"func_name\":\"key_manager\",\"action\":\"save\",\"param\":{\"ca\":\"$_cert_content_single_line\",\"key\":\"$_key_content_single_line\",\"id\":$IKUAI_CERT_ID,\"enabled\":\"yes\",\"comment\":\"\"}}"
+  _response=$(_post "$_key_manager_req" "$_ikuai_url/Action/call" "" "POST" "application/json")
+
+  _err_msg="$(printf "%s" "$_response" | _normalizeJson | _egrep_o '"ErrMsg":"[^"]*"' | cut -d'"' -f 4)"
+  # check ErrMsg
+  if [ "$_err_msg" != "Success" ]; then
+    _err "Failed to deploy the cert to ikuai: $_err_msg"
+    return 1
+  fi
+
+  _info "Save the deploy config ... "
+  # Save the config
+  _savedeployconf IKUAI_SCHEME "$IKUAI_SCHEME"
+  _savedeployconf IKUAI_HOSTNAME "$IKUAI_HOSTNAME"
+  _savedeployconf IKUAI_PORT "$IKUAI_PORT"
+  _savedeployconf IKUAI_USERNAME "$IKUAI_USERNAME"
+  _savedeployconf IKUAI_PASSWORD "$IKUAI_PASSWORD"
+  _savedeployconf IKUAI_CERT_ID "$IKUAI_CERT_ID"
+
+  _info "Successfully deployed certificate to ikuai. Enjoy! :>"
+
+  return 0
+}

deploy/jetkvm.sh

@@ -0,0 +1,253 @@
+#!/usr/bin/env sh
+
+# Script to deploy a certificate to a JetKVM (https://jetkvm.com) KVM-over-IP
+# device over SSH. See also:
+# https://github.com/acmesh-official/acme.sh/wiki/deployhooks
+#
+# JetKVM only supports key-based SSH authentication (root@<device>, password
+# logins are disabled) once "Developer Mode" is enabled and a public key is
+# pasted into its web UI (Settings > Advanced). SSH keys must already be
+# exchanged and a passwordless login confirmed working (e.g. `ssh
+# root@jetkvm.example.com true`) before using this hook.
+#
+# JetKVM's minimal userspace does not ship an scp binary or SFTP server, so
+# unlike deploy/ssh.sh this hook has no "use scp" option: it always writes
+# the certificate and key by piping a small POSIX shell script to the
+# remote "sh" over stdin (only depends on "sh", "cat", "chmod", "mkdir",
+# "mv" and "rm" on the device side). The remote path, filenames and file
+# permissions are firmware constants on this single-purpose, single-root
+# appliance, so they are not configurable here.
+#
+# JetKVM's "Custom" TLS mode (device web UI: Settings > Network > HTTPS
+# Mode, must already be set to "Custom" before this hook's uploads take
+# effect) reads the certificate/key from that fixed location and does not
+# hot-reload: a device reboot is required to pick up a new certificate.
+# This hook's restart command therefore defaults to "reboot" -- a blank
+# DEPLOY_JETKVM_RESTART_CMD is treated the same as unset (falls back to
+# "reboot") rather than silently skipping it, since a renewed certificate
+# that's never actually applied defeats the point of automating this; set
+# it to the literal value "none" to opt out and apply/verify manually.
+# The restart command is run detached on the device (nohup ... &) so this
+# hook's ssh call can return before the reboot itself lands, rather than
+# racing the connection teardown.
+#
+# The certificate and key are staged under fixed temporary names on the
+# device and only renamed into their final names (an atomic "mv", on the
+# same filesystem) once both have been fully written and chmod'ed. This
+# keeps a dropped connection or a failed write from ever leaving the
+# device with a truncated or mismatched certificate/key pair for its own
+# HTTPS listener, and a "trap ... EXIT" in the generated script removes
+# any leftover staged file however that script exits.
+#
+# Before writing anything, this hook also checks that the device's HTTPS
+# Mode is already "Custom" -- uploading a certificate that mode won't
+# even serve would otherwise be a silent no-op. There is currently no
+# documented/headless way to read this back (JetKVM's own JSON-RPC
+# getTLSState/setTLSState calls require an authenticated WebRTC session,
+# see https://github.com/jetkvm/kvm/issues/1240 and the still-open
+# https://github.com/jetkvm/kvm/pull/1515), so this greps the device's
+# own config file instead: JetKVM's firmware (see web_tls.go / config.go
+# in https://github.com/jetkvm/kvm) persists the mode as the plain-JSON
+# field "tls_mode" (values "", "self-signed", or "custom") in
+# /userdata/kvm_config.json.
+#
+# None of the above (storage path, filenames, config file, reboot-to-apply
+# behavior) is part of JetKVM's stable/documented API; it was confirmed
+# against real JetKVM hardware, but is worth a spot-check after a JetKVM
+# firmware upgrade -- set DEPLOY_JETKVM_REQUIRE_CUSTOM_MODE=no to skip the
+# HTTPS-mode check entirely if a future firmware version changes that
+# file's format out from under it.
+#
+# The following variables exported from environment will be used. If not
+# set then values previously saved in the domain.conf file are used. All
+# of them are optional.
+#
+# export DEPLOY_JETKVM_USER="root"                        # defaults to "root"
+# export DEPLOY_JETKVM_HOST="jetkvm.example.com"          # defaults to the cert's domain
+# export DEPLOY_JETKVM_PORT="22"                          # defaults to 22
+# export DEPLOY_JETKVM_SSH_CMD="ssh -T"                   # defaults to "ssh -T"
+# export DEPLOY_JETKVM_RESTART_CMD="reboot"               # defaults to "reboot"; set to "none" to skip it
+# export DEPLOY_JETKVM_REQUIRE_CUSTOM_MODE="yes"          # defaults to "yes" (verify tls_mode=custom before upload); set to "no" to skip
+#
+# Example:
+# ```sh
+# export DEPLOY_JETKVM_HOST="192.168.1.50"
+# acme.sh --deploy -d jetkvm.example.com --deploy-hook jetkvm
+# ```
+#
+# returns 0 means success, otherwise error.
+
+########  Public functions #####################
+
+#domain keyfile certfile cafile fullchain
+jetkvm_deploy() {
+  _cdomain="$1"
+  _ckey="$2"
+  _ccert="$3"
+  _cca="$4"
+  _cfullchain="$5"
+
+  _debug _cdomain "$_cdomain"
+  _debug _ckey "$_ckey"
+  _debug _ccert "$_ccert"
+  _debug _cca "$_cca"
+  _debug _cfullchain "$_cfullchain"
+
+  if [ ! -s "$_ckey" ] || [ ! -s "$_cfullchain" ]; then
+    _err "JetKVM deploy needs both a private key and a fullchain certificate (not available, e.g., after --signcsr)."
+    return 1
+  fi
+
+  _getdeployconf DEPLOY_JETKVM_USER
+  if [ -z "$DEPLOY_JETKVM_USER" ]; then
+    DEPLOY_JETKVM_USER="root"
+  fi
+  _savedeployconf DEPLOY_JETKVM_USER "$DEPLOY_JETKVM_USER"
+
+  _getdeployconf DEPLOY_JETKVM_HOST
+  if [ -z "$DEPLOY_JETKVM_HOST" ]; then
+    _debug "Using _cdomain as DEPLOY_JETKVM_HOST, please set if not correct."
+    DEPLOY_JETKVM_HOST="$_cdomain"
+  fi
+  _savedeployconf DEPLOY_JETKVM_HOST "$DEPLOY_JETKVM_HOST"
+
+  _getdeployconf DEPLOY_JETKVM_PORT
+  if [ -z "$DEPLOY_JETKVM_PORT" ]; then
+    DEPLOY_JETKVM_PORT="22"
+  fi
+  _savedeployconf DEPLOY_JETKVM_PORT "$DEPLOY_JETKVM_PORT"
+
+  _getdeployconf DEPLOY_JETKVM_SSH_CMD
+  if [ -z "$DEPLOY_JETKVM_SSH_CMD" ]; then
+    DEPLOY_JETKVM_SSH_CMD="ssh -T"
+  fi
+  _savedeployconf DEPLOY_JETKVM_SSH_CMD "$DEPLOY_JETKVM_SSH_CMD" "base64"
+
+  _getdeployconf DEPLOY_JETKVM_RESTART_CMD
+  if [ -z "$DEPLOY_JETKVM_RESTART_CMD" ]; then
+    DEPLOY_JETKVM_RESTART_CMD="reboot"
+  fi
+  _savedeployconf DEPLOY_JETKVM_RESTART_CMD "$DEPLOY_JETKVM_RESTART_CMD" "base64"
+
+  _getdeployconf DEPLOY_JETKVM_REQUIRE_CUSTOM_MODE
+  if [ -z "$DEPLOY_JETKVM_REQUIRE_CUSTOM_MODE" ]; then
+    DEPLOY_JETKVM_REQUIRE_CUSTOM_MODE="yes"
+  fi
+  _savedeployconf DEPLOY_JETKVM_REQUIRE_CUSTOM_MODE "$DEPLOY_JETKVM_REQUIRE_CUSTOM_MODE"
+
+  _info "Deploying certificate to JetKVM device $DEPLOY_JETKVM_USER@$DEPLOY_JETKVM_HOST:$DEPLOY_JETKVM_PORT"
+
+  # Firmware constants on a single-purpose, single-root appliance -- not
+  # user configuration. If JetKVM ever moves these, that's a hook update,
+  # not a setting (a saved-per-domain override would just as easily hide
+  # the fix from anyone already using this hook).
+  _jetkvm_remote_path="/userdata/jetkvm/tls"
+  _jetkvm_cert_name="user-defined.crt"
+  _jetkvm_key_name="user-defined.key"
+  _jetkvm_config_file="/userdata/kvm_config.json"
+  _jetkvm_mode_exitcode=3
+  _jetkvm_config_missing_exitcode=4
+
+  _jetkvm_run_id="$$.$(_time)"
+  _jetkvm_cert_marker="ACME_JETKVM_CERT_$_jetkvm_run_id"
+  _jetkvm_key_marker="ACME_JETKVM_KEY_$_jetkvm_run_id"
+  _jetkvm_cert_tmp="$_jetkvm_remote_path/.$_jetkvm_cert_name.tmp"
+  _jetkvm_key_tmp="$_jetkvm_remote_path/.$_jetkvm_key_name.tmp"
+  _jetkvm_cert_target="$_jetkvm_remote_path/$_jetkvm_cert_name"
+  _jetkvm_key_target="$_jetkvm_remote_path/$_jetkvm_key_name"
+
+  # Command substitution strips all trailing newlines, so the printf below
+  # always emits the content with exactly one trailing newline before the
+  # heredoc terminator -- regardless of whether the source file already
+  # ended with one -- so the terminator is guaranteed to start its own line.
+  _jetkvm_cert_content="$(cat "$_cfullchain")"
+  _jetkvm_key_content="$(cat "$_ckey")"
+
+  _jetkvm_upload_script="$(
+    echo "#!/bin/sh"
+    echo "set -e"
+    echo "umask 077"
+    printf "trap \"rm -f '%s' '%s'\" EXIT\n" "$_jetkvm_cert_tmp" "$_jetkvm_key_tmp"
+    if [ "$DEPLOY_JETKVM_REQUIRE_CUSTOM_MODE" != "no" ]; then
+      # Uploading a certificate that HTTPS Mode won't even serve would
+      # otherwise fail silently -- see the header comment for why this
+      # greps the device's own config file rather than querying it
+      # through a documented API (there isn't one for reading this
+      # headlessly yet). The config file is checked for readability
+      # separately so a missing/renamed file isn't misreported as
+      # HTTPS Mode being wrong.
+      printf "if [ ! -r '%s' ]; then exit %s; fi\n" "$_jetkvm_config_file" "$_jetkvm_config_missing_exitcode"
+      printf 'if ! grep -q '\''"tls_mode" *: *"custom"'\'' '\''%s'\''; then exit %s; fi\n' "$_jetkvm_config_file" "$_jetkvm_mode_exitcode"
+    fi
+    printf "mkdir -p '%s'\n" "$_jetkvm_remote_path"
+    printf "cat > '%s' <<'%s'\n" "$_jetkvm_cert_tmp" "$_jetkvm_cert_marker"
+    printf '%s\n' "$_jetkvm_cert_content"
+    echo "$_jetkvm_cert_marker"
+    printf "chmod 0644 '%s'\n" "$_jetkvm_cert_tmp"
+    printf "cat > '%s' <<'%s'\n" "$_jetkvm_key_tmp" "$_jetkvm_key_marker"
+    printf '%s\n' "$_jetkvm_key_content"
+    echo "$_jetkvm_key_marker"
+    printf "chmod 0600 '%s'\n" "$_jetkvm_key_tmp"
+    printf "mv '%s' '%s'\n" "$_jetkvm_cert_tmp" "$_jetkvm_cert_target"
+    printf "mv '%s' '%s'\n" "$_jetkvm_key_tmp" "$_jetkvm_key_target"
+  )"
+
+  _secure_debug "Generated upload script" "$_jetkvm_upload_script"
+
+  _info "Connecting to JetKVM device $DEPLOY_JETKVM_USER@$DEPLOY_JETKVM_HOST:$DEPLOY_JETKVM_PORT to deploy certificate"
+  # shellcheck disable=SC2086
+  printf '%s\n' "$_jetkvm_upload_script" | $DEPLOY_JETKVM_SSH_CMD -p "$DEPLOY_JETKVM_PORT" "$DEPLOY_JETKVM_USER@$DEPLOY_JETKVM_HOST" sh
+  _ret=$?
+
+  if [ "$_ret" = "$_jetkvm_config_missing_exitcode" ]; then
+    _err "JetKVM config file ($_jetkvm_config_file) was not found or not readable on the device -- this hook's assumptions may be out of date after a firmware upgrade. Certificate was NOT uploaded."
+    return "$_ret"
+  fi
+
+  if [ "$_ret" = "$_jetkvm_mode_exitcode" ]; then
+    _err "JetKVM HTTPS Mode is not set to \"Custom\" (checked \"tls_mode\" in $_jetkvm_config_file on the device). Set it in the device's web UI (Settings > Network > HTTPS Mode) before this hook can take effect. Certificate was NOT uploaded."
+    return "$_ret"
+  fi
+
+  if [ "$_ret" != "0" ]; then
+    _err "Error code $_ret returned uploading certificate to JetKVM device"
+    return "$_ret"
+  fi
+
+  _info "Certificate and key uploaded to $_jetkvm_remote_path on the device"
+
+  if [ "$DEPLOY_JETKVM_RESTART_CMD" = "none" ]; then
+    _info "Certificate successfully deployed to JetKVM device. DEPLOY_JETKVM_RESTART_CMD=none, skipping restart command."
+    return 0
+  fi
+
+  # Run the restart command detached (nohup ... &) so this ssh call
+  # returns as soon as it's launched, before the device actually reboots,
+  # rather than racing the connection teardown -- observed, against real
+  # hardware, that a reboot racing the SSH session's own exit can make
+  # ssh itself exit anywhere from a clean 0 to a connection-reset 255.
+  # Since the restart command then runs as an unwaited background job on
+  # the device, this ssh call reports success as soon as that job is
+  # launched -- it does NOT confirm nohup, sh, or the restart command
+  # itself actually exist or succeed (measured: a nonexistent restart
+  # command, and even a missing nohup binary, both still return 0 here).
+  # Only an outright SSH connection failure (unreachable host, auth
+  # failure, etc.) is caught below. "sleep" runs on the device's own
+  # shell, not acme.sh's, so acme.sh's _sleep wrapper does not apply.
+  _info "Running post-upload command on JetKVM device: $DEPLOY_JETKVM_RESTART_CMD"
+  # Escape any single quotes in the (user-configurable, free-text)
+  # restart command before nesting it inside the outer 'sleep N; ...'
+  # single-quoted string -- otherwise a value like "sh -c 'sync; reboot'"
+  # breaks the quoting and only part of it ends up inside the detached
+  # background job.
+  _jetkvm_restart_cmd_escaped=$(printf '%s' "$DEPLOY_JETKVM_RESTART_CMD" | sed "s/'/'\\\\''/g")
+  _jetkvm_detached_cmd="nohup sh -c 'sleep 2; $_jetkvm_restart_cmd_escaped' >/dev/null 2>&1 &"
+  # shellcheck disable=SC2086
+  if ! $DEPLOY_JETKVM_SSH_CMD -p "$DEPLOY_JETKVM_PORT" "$DEPLOY_JETKVM_USER@$DEPLOY_JETKVM_HOST" "$_jetkvm_detached_cmd"; then
+    _err "Certificate was uploaded, but connecting to the JetKVM device to launch the restart command failed."
+    return 1
+  fi
+
+  _info "Certificate deployed to JetKVM device; it will restart shortly to apply it."
+  return 0
+}

deploy/keyhelp.sh

@@ -83,7 +83,7 @@ keyhelp_deploy() {
   _request_body="submit=1&certificate_name=$certificate_name&add_type=upload&text_private_key=$encoded_key&text_certificate=$encoded_ccert&text_ca_certificate=$encoded_cca"
   _H1="Cookie: $_cookie"
   _response=$(_post "$_request_body" "$DEPLOY_KEYHELP_BASEURL/index.php?page=ssl_certificates&action=add" "" "POST")
-  _message=$(echo "$_response" | grep -A 2 'message-body' | sed -n '/<div class="message-body ">/,/<\/div>/{//!p;}' | sed 's/<[^>]*>//g' | sed 's/^ *//;s/ *$//')
+  _message=$(echo "$_response" | sed -n '/<div class="message-body ">/,/<\/div>/{//!p;}' | sed 's/<[^>]*>//g' | sed 's/^ *//;s/ *$//')
   _info "_message" "$_message"
   if [ -z "$_message" ]; then
     _err "Fail to upload certificate."
@@ -118,7 +118,7 @@ keyhelp_deploy() {
 
     _request_body="submit=1&id=$DOMAIN_ID&target_type=$target_type&path=$path&is_prefer_https=$is_prefer_https&hsts_enabled=$hsts_enabled&certificate_type=custom&certificate_id=$cert_value&enforce_https=$DEPLOY_KEYHELP_ENFORCE_HTTPS"
     _response=$(_post "$_request_body" "$DEPLOY_KEYHELP_BASEURL/index.php?page=domains&action=edit" "" "POST")
-    _message=$(echo "$_response" | grep -A 2 'message-body' | sed -n '/<div class="message-body ">/,/<\/div>/{//!p;}' | sed 's/<[^>]*>//g' | sed 's/^ *//;s/ *$//')
+    _message=$(echo "$_response" | sed -n '/<div class="message-body ">/,/<\/div>/{//!p;}' | sed 's/<[^>]*>//g' | sed 's/^ *//;s/ *$//')
     _info "_message" "$_message"
     if [ -z "$_message" ]; then
       _err "Fail to apply certificate."

deploy/lighttpd.sh

@@ -121,10 +121,7 @@ lighttpd_deploy() {
   # Set the suffix depending if we are creating a bundle or not
   if [ "${Le_Deploy_lighttpd_bundle}" = "yes" ]; then
     _info "Bundle creation requested"
-    # Initialise $Le_Keylength if its not already set
-    if [ -z "${Le_Keylength}" ]; then
-      Le_Keylength=""
-    fi
+    # shellcheck disable=SC2154 # Le_Keylength is set by acme.sh core, not this hook
     if _isEccKey "${Le_Keylength}"; then
       _info "ECC key type detected"
       _suffix=".ecdsa"

deploy/multideploy.sh

@@ -10,6 +10,10 @@
 # Usage (shown values are the examples):
 # 1. Set optional environment variables
 #   - export MULTIDEPLOY_FILENAME="multideploy.yaml"     - "multideploy.yml" will be automatically used if not set"
+#     A name without a leading '/' is looked up in the certificate directory
+#     of the domain. An absolute path is used as is, so a single deploy file
+#     can be shared by all domains, e.g.
+#   - export MULTIDEPLOY_FILENAME="/etc/acme/multideploy.yml"
 #
 # 2. Run command:
 # acme.sh --deploy --deploy-hook multideploy -d example.com
@@ -49,7 +53,7 @@ multideploy_deploy() {
   _debug _cfullchain "$_cfullchain"
   _debug _cpfx "$_cpfx"
 
-  MULTIDEPLOY_FILENAME="${MULTIDEPLOY_FILENAME:-$(_getdeployconf MULTIDEPLOY_FILENAME)}"
+  _getdeployconf MULTIDEPLOY_FILENAME
   if [ -z "$MULTIDEPLOY_FILENAME" ]; then
     MULTIDEPLOY_FILENAME="multideploy.yml"
     _info "MULTIDEPLOY_FILENAME is not set, so I will use 'multideploy.yml'."
@@ -75,7 +79,8 @@ multideploy_deploy() {
 #   This function preprocesses the deploy file by checking if 'yq' is installed,
 #   verifying the existence of the deploy file, and ensuring only one deploy file is present.
 # Arguments:
-#   $@ - Posible deploy file names.
+#   $@ - Posible deploy file names. A name starting with '/' is treated as an
+#        absolute path, any other name is relative to the domain directory.
 # Usage:
 #   _preprocess_deployfile "<deploy_file1>" "<deploy_file2>?"
 _preprocess_deployfile() {
@@ -87,15 +92,21 @@ _preprocess_deployfile() {
   _debug3 "yq is installed."
 
   # Check if deploy file exists
+  found_file=""
   for file in "$@"; do
-    _debug3 "Checking file" "$DOMAIN_PATH/$file"
-    if [ -f "$DOMAIN_PATH/$file" ]; then
+    if _startswith "$file" "/"; then
+      _multideploy_path="$file"
+    else
+      _multideploy_path="$DOMAIN_PATH/$file"
+    fi
+    _debug3 "Checking file" "$_multideploy_path"
+    if [ -f "$_multideploy_path" ]; then
       _debug3 "File found"
       if [ -n "$found_file" ]; then
         _err "Multiple deploy files found. Please keep only one deploy file."
         return 1
       fi
-      found_file="$file"
+      found_file="$_multideploy_path"
     else
       _debug3 "File not found"
     fi
@@ -105,12 +116,12 @@ _preprocess_deployfile() {
     _err "Deploy file not found. Go to https://github.com/acmesh-official/acme.sh/wiki/deployhooks#36-deploying-to-multiple-services-with-the-same-hooks to see how to create one."
     return 1
   fi
-  if ! _check_deployfile "$DOMAIN_PATH/$found_file"; then
-    _err "Deploy file is not valid: $DOMAIN_PATH/$found_file"
+  if ! _check_deployfile "$found_file"; then
+    _err "Deploy file is not valid: $found_file"
     return 1
   fi
 
-  echo "$DOMAIN_PATH/$found_file"
+  echo "$found_file"
 }
 
 # Description:
@@ -210,7 +221,7 @@ _clear_envs() {
 
   echo "$env_pairs" | while IFS='=' read -r _key _value; do
     _debug3 "Deleting key" "$_key"
-    _cleardomainconf "SAVED_$_key"
+    _cleardeployconf "$_key"
     unset -v "$_key"
   done
 }

deploy/mydevil.sh

@@ -54,6 +54,8 @@ mydevil_deploy() {
 # Usage: ip=$(mydevil_get_ip domain.com)
 #        echo $ip
 mydevil_get_ip() {
-  devil dns list "$1" | cut -w -s -f 3,7 | grep "^A$(printf '\t')" | cut -w -s -f 2 || return 1
+  # tr squeezes runs of blanks into one tab so plain cut works everywhere;
+  # cut -w is BSD-only and unknown to GNU coreutils
+  devil dns list "$1" | tr -s ' \t' '\t' | cut -s -f 3,7 | grep "^A$(printf '\t')" | cut -s -f 2 || return 1
   return 0
 }

deploy/panos.sh

@@ -296,9 +296,20 @@ panos_deploy() {
       _err "Unable to generate an API key.  The user and pass may be invalid or not authorized to generate a new key.  Please check the PANOS_USER and PANOS_PASS credentials and try again"
       return 1
     else
-      deployer cert
-      deployer key
-      deployer commit
+      # A commit of a failed import would leave a mismatched cert/key pair
+      # on the firewall and can lock the admin out of the management
+      # interface, see https://github.com/acmesh-official/acme.sh/issues/4716
+      if ! deployer cert; then
+        _err "Cert import failed. Aborting without committing."
+        return 1
+      fi
+      if ! deployer key; then
+        _err "Key import failed. Aborting without committing. Warning: the firewall now has an uncommitted mismatched cert/key pair in its candidate config."
+        return 1
+      fi
+      if ! deployer commit; then
+        return 1
+      fi
       if [ "$_panos_template_stack" ]; then
         # try to get job status for 20 times in 30 sec interval
         i=0

deploy/proxmoxbs.sh

@@ -116,17 +116,24 @@ HEREDOC
   export HTTPS_INSECURE=1
   export _H1="Authorization: PBSAPIToken=${_proxmoxbs_header_api_token}"
   response=$(_post "$_json_payload" "$_target_url" "" POST "application/json")
+  _retval=$?
+  # The API errors out with a non-2xx HTTP status and an empty body,
+  # so the status line is checked too, not only the response body.
+  _status_code="$(grep "^HTTP" "$HTTP_HEADER" | _tail_n 1 | cut -d " " -f 2 | tr -d "\r\n")"
+  _debug2 "HTTP status" "$_status_code"
   response="$(echo "$response" | _json_decode | _normalizeJson)"
   message=$(echo "$response" | _egrep_o '"message":"[^"]*' | cut -d : -f 2 | tr -d '"')
-  _retval=$?
-  if [ "${_retval}" -eq 0 ] && [ -z "$message" ]; then
-    _debug3 response "$response"
-    _info "Certificate successfully deployed"
-    return 0
-  else
-    _err "Certificate deployment failed: $message"
-    _debug "Response" "$response"
-    return 1
-  fi
+  case "$_status_code" in
+  2[0-9][0-9])
+    if [ "${_retval}" -eq 0 ] && [ -z "$message" ]; then
+      _debug3 response "$response"
+      _info "Certificate successfully deployed"
+      return 0
+    fi
+    ;;
+  esac
+  _err "Certificate deployment failed (HTTP status $_status_code). $message"
+  _debug "Response" "$response"
+  return 1
 
 }

deploy/proxmoxve.sh

@@ -128,17 +128,24 @@ HEREDOC
   export HTTPS_INSECURE=1
   export _H1="Authorization: PVEAPIToken=${_proxmoxve_header_api_token}"
   response=$(_post "$_json_payload" "$_target_url" "" POST "application/json")
+  _retval=$?
+  # The API errors out with a non-2xx HTTP status and an empty body,
+  # so the status line is checked too, not only the response body.
+  _status_code="$(grep "^HTTP" "$HTTP_HEADER" | _tail_n 1 | cut -d " " -f 2 | tr -d "\r\n")"
+  _debug2 "HTTP status" "$_status_code"
   response="$(echo "$response" | _json_decode | _normalizeJson)"
   message=$(echo "$response" | _egrep_o '"message":"[^"]*' | cut -d : -f 2 | tr -d '"')
-  _retval=$?
-  if [ "${_retval}" -eq 0 ] && [ -z "$message" ]; then
-    _debug3 response "$response"
-    _info "Certificate successfully deployed"
-    return 0
-  else
-    _err "Certificate deployment failed: $message"
-    _debug "Response" "$response"
-    return 1
-  fi
+  case "$_status_code" in
+  2[0-9][0-9])
+    if [ "${_retval}" -eq 0 ] && [ -z "$message" ]; then
+      _debug3 response "$response"
+      _info "Certificate successfully deployed"
+      return 0
+    fi
+    ;;
+  esac
+  _err "Certificate deployment failed (HTTP status $_status_code). $message"
+  _debug "Response" "$response"
+  return 1
 
 }

deploy/routeros.sh

@@ -125,7 +125,7 @@ routeros_deploy() {
   _savedeployconf ROUTER_OS_PORT "$ROUTER_OS_PORT"
   _savedeployconf ROUTER_OS_SSH_CMD "$ROUTER_OS_SSH_CMD"
   _savedeployconf ROUTER_OS_SCP_CMD "$ROUTER_OS_SCP_CMD"
-  _savedeployconf ROUTER_OS_ADDITIONAL_SERVICES "$ROUTER_OS_ADDITIONAL_SERVICES"
+  _savedeployconf ROUTER_OS_ADDITIONAL_SERVICES "$ROUTER_OS_ADDITIONAL_SERVICES" "base64"
 
   # push key to routeros
   if ! _scp_certificate "$_ckey" "$ROUTER_OS_USERNAME@$ROUTER_OS_HOST:$_cdomain.key"; then
@@ -143,6 +143,7 @@ comment=\"generated by routeros deploy script in acme.sh\" \
 source=\"/certificate remove [ find name=$_cdomain.cer_0 ];\
 \n/certificate remove [ find name=$_cdomain.cer_1 ];\
 \n/certificate remove [ find name=$_cdomain.cer_2 ];\
+\n/certificate remove [ find name=$_cdomain.cer_3 ];\
 \ndelay 1;\
 \n/certificate import file-name=\\\"$_cdomain.cer\\\" passphrase=\\\"\\\";\
 \n/certificate import file-name=\\\"$_cdomain.key\\\" passphrase=\\\"\\\";\

deploy/ruckus.sh

@@ -175,7 +175,7 @@ _get_unleashed_version() {
 
 _post_upload() {
   _post_action="$1"
-  _post_file="$2"
+  _post_upfile="$2"
 
   _post_boundary="----FormBoundary$(date "+%s%N")"
 
@@ -183,7 +183,7 @@ _post_upload() {
     printf -- "--%s\r\n" "$_post_boundary"
     printf -- "Content-Disposition: form-data; name=\"u\"; filename=\"%s\"\r\n" "$_post_action"
     printf -- "Content-Type: application/octet-stream\r\n\r\n"
-    printf -- "%s\r\n" "$(cat "$_post_file")"
+    printf -- "%s\r\n" "$(cat "$_post_upfile")"
 
     printf -- "--%s\r\n" "$_post_boundary"
     printf -- "Content-Disposition: form-data; name=\"action\"\r\n\r\n"

deploy/shelly.sh

@@ -0,0 +1,280 @@
+#!/usr/bin/env sh
+
+# Here is a script to deploy cert to a Shelly Gen3+ device.
+# Deploy the HTTPS server certificate to a Shelly device on the local network.
+#
+# ```sh
+# export SHELLY_HOST=192.168.1.100
+# export SHELLY_PASSWORD=mysecret    # only if auth is enabled on the device
+# acme.sh --deploy -d shelly.example.com --deploy-hook shelly
+# ```
+#
+# Environment variables:
+#   SHELLY_HOST      (required)  IP or hostname of the Shelly device
+#   SHELLY_PASSWORD  (optional)  Admin password for digest authentication.
+#                                Omit if auth is disabled on the device.
+#   SHELLY_USER      (optional)  Username for auth. Default: admin
+#   SHELLY_REBOOT     (optional)  Set to "0" to skip auto-reboot.
+#                                Default: 1 (reboot after upload)
+#
+# Requirements:
+#   - Shelly Gen3+ device (Gen4 recommended)
+#   - Firmware 2.0.0+ for HTTPS server certificate support
+#   - curl or wget
+#   - openssl (for SHA-256 digest and random cnonce)
+#
+# The device must be reachable via HTTP on the local network.
+# The hook uploads the fullchain.pem and private key,
+# then reboots the device to apply the new certificate.
+#
+# Authentication uses standard RFC 7616 HTTP Digest (SHA-256) since
+# firmware 2.0.0. The JSON-RPC auth object is not used for HTTP transport.
+#
+# returns 0 means success, otherwise error.
+
+########  Public functions #####################
+
+#domain keyfile certfile cafile fullchain
+shelly_deploy() {
+  _cdomain="$1"
+  _ckey="$2"
+  _ccert="$3"
+  _cca="$4"
+  _cfullchain="$5"
+
+  _debug _cdomain "$_cdomain"
+  _debug _ckey "$_ckey"
+  _debug _ccert "$_ccert"
+  _debug _cca "$_cca"
+  _debug _cfullchain "$_cfullchain"
+
+  _getdeployconf SHELLY_HOST
+  _getdeployconf SHELLY_PASSWORD
+  _getdeployconf SHELLY_USER
+  _getdeployconf SHELLY_REBOOT
+
+  _debug SHELLY_HOST "$SHELLY_HOST"
+  _debug SHELLY_USER "$SHELLY_USER"
+  _secure_debug SHELLY_PASSWORD "$SHELLY_PASSWORD"
+  _debug SHELLY_REBOOT "$SHELLY_REBOOT"
+
+  if [ -z "$SHELLY_HOST" ]; then
+    _err "SHELLY_HOST is required. Please set the IP or hostname of your Shelly device."
+    return 1
+  fi
+
+  SHELLY_USER="${SHELLY_USER:-admin}"
+  SHELLY_REBOOT="${SHELLY_REBOOT:-1}"
+
+  _savedeployconf SHELLY_HOST "$SHELLY_HOST"
+  _savedeployconf SHELLY_PASSWORD "$SHELLY_PASSWORD"
+  _savedeployconf SHELLY_USER "$SHELLY_USER"
+  _savedeployconf SHELLY_REBOOT "$SHELLY_REBOOT"
+
+  # --- Auth handshake (only if password is set) ---
+  _shelly_auth_header=""
+  if [ -n "$SHELLY_PASSWORD" ]; then
+    _info "Authenticating to Shelly device at $SHELLY_HOST"
+    if ! _shelly_handshake; then
+      _err "Authentication handshake failed. Check SHELLY_PASSWORD and device accessibility."
+      return 1
+    fi
+    _info "Authentication successful"
+  fi
+
+  # --- Upload certificate ---
+  _info "Uploading certificate to Shelly device at $SHELLY_HOST"
+  if ! _shelly_upload_cert; then
+    _err "Certificate upload failed"
+    return 1
+  fi
+
+  # --- Upload key ---
+  _info "Uploading private key to Shelly device"
+  if ! _shelly_upload_key; then
+    _err "Private key upload failed"
+    return 1
+  fi
+
+  _info "Certificate and key uploaded successfully"
+
+  # --- Reboot ---
+  if [ "$SHELLY_REBOOT" != "0" ]; then
+    _info "Rebooting Shelly device to apply certificate"
+    # Reboot may close the connection before sending a response
+    _shelly_rpc "Shelly.Reboot" '{}' || _debug "Reboot may have closed connection (expected)"
+    _info "Reboot command sent. Device will restart shortly."
+  else
+    _info "Skipping reboot (SHELLY_REBOOT=0). Certificate will apply on next restart."
+  fi
+
+  # Clear auth header so it does not leak to other hooks
+  export _H1=""
+
+  return 0
+}
+
+# --- Helper functions ---
+
+# Perform RFC 7616 HTTP Digest auth handshake.
+# Sets _shelly_auth_header on success (the Authorization header value).
+_shelly_handshake() {
+  _inithttp
+
+  _debug "Probing device for auth challenge"
+
+  # Use a protected method (Shelly.GetStatus) to trigger 401.
+  # Shelly.GetDeviceInfo is excluded from auth and would miss the challenge.
+  _post '{"id":1,"method":"Shelly.GetStatus"}' \
+    "http://${SHELLY_HOST}/rpc" "" "" "application/json"
+
+  # Detect auth from HTTP status line rather than response body
+  if ! _shelly_has_auth_challenge "$HTTP_HEADER"; then
+    # No auth challenge — device accepted the request without credentials
+    _debug "Device responded without auth challenge. Proceeding without auth."
+    return 0
+  fi
+
+  _shelly_realm="$(grep -i '^WWW-Authenticate:' "$HTTP_HEADER" | sed 's/.*realm="//;s/".*//')"
+  _shelly_nonce="$(grep -i '^WWW-Authenticate:' "$HTTP_HEADER" | sed 's/.*nonce="//;s/".*//')"
+  _shelly_qop="$(grep -i '^WWW-Authenticate:' "$HTTP_HEADER" | sed 's/.*qop="//;s/".*//')"
+
+  if [ -z "$_shelly_nonce" ]; then
+    _err "Failed to extract nonce from WWW-Authenticate header. Is SHELLY_PASSWORD correct?"
+    return 1
+  fi
+
+  _shelly_qop="${_shelly_qop:-auth}"
+
+  _debug "Shelly realm: $_shelly_realm"
+  _debug "Shelly qop: $_shelly_qop"
+  _secure_debug "Shelly nonce" "$_shelly_nonce"
+
+  # ha1 = SHA256(username:realm:password)
+  _shelly_ha1="$(printf '%s' "${SHELLY_USER}:${_shelly_realm}:${SHELLY_PASSWORD}" | _digest sha256 hex)"
+  _secure_debug "Shelly ha1" "$_shelly_ha1"
+
+  # Generate client nonce (openssl is required for _digest, so always available)
+  _shelly_cnonce="$(${ACME_OPENSSL_BIN:-openssl} rand -hex 8 2>/dev/null)"
+  _debug "Shelly cnonce: $_shelly_cnonce"
+
+  # Build the digest Authorization header value (stored for reuse)
+  _shelly_nc=1
+  _shelly_build_auth_header
+
+  return 0
+}
+
+# Check whether the HTTP response headers contain a digest auth challenge.
+# Returns 0 (true) if a 401 with WWW-Authenticate is present.
+_shelly_has_auth_challenge() {
+  _shelly_headers_file="$1"
+  _shelly_status="$(grep -i '^HTTP/' "$_shelly_headers_file" | _tail_n 1 | awk '{print $2}')"
+  [ "$_shelly_status" = "401" ] && grep -qi '^WWW-Authenticate:' "$_shelly_headers_file"
+}
+
+# Build or rebuild the RFC 7616 Authorization header.
+# Uses: _shelly_ha1, _shelly_nonce, _shelly_cnonce, _shelly_qop, _shelly_realm, _shelly_nc
+# Sets: _shelly_auth_header
+_shelly_build_auth_header() {
+  _shelly_nc_hex="$(printf '%08x' "$_shelly_nc")"
+
+  # ha2 = SHA256(POST:/rpc)
+  _shelly_ha2="$(printf '%s' "POST:/rpc" | _digest sha256 hex)"
+
+  # response = SHA256(ha1:nonce:nc:cnonce:qop:ha2)
+  _shelly_digest_response="$(printf '%s' "${_shelly_ha1}:${_shelly_nonce}:${_shelly_nc_hex}:${_shelly_cnonce}:${_shelly_qop}:${_shelly_ha2}" | _digest sha256 hex)"
+
+  # Build the Authorization header value (without the "Authorization: " prefix)
+  _shelly_auth_header="Digest username=\"${SHELLY_USER}\", realm=\"${_shelly_realm}\", nonce=\"${_shelly_nonce}\", uri=\"/rpc\", qop=${_shelly_qop}, nc=${_shelly_nc_hex}, cnonce=\"${_shelly_cnonce}\", response=\"${_shelly_digest_response}\", algorithm=SHA-256"
+
+  _secure_debug "Authorization header" "$_shelly_auth_header"
+}
+
+# Make a Shelly JSON-RPC call.
+# Usage: _shelly_rpc <method> <params_json>
+# Returns 0 on success, 1 on error.
+_shelly_rpc() {
+  _shelly_method="$1"
+  _shelly_params="$2"
+
+  _shelly_body='{"id":1,"method":"'"$_shelly_method"'","params":'"$_shelly_params"'}'
+
+  _debug "RPC method: $_shelly_method"
+  _debug2 "RPC body: $_shelly_body"
+
+  # shellcheck disable=SC2090
+  if [ -n "$_shelly_auth_header" ]; then
+    export _H1="Authorization: $_shelly_auth_header"
+  else
+    export _H1=""
+  fi
+
+  _post "$_shelly_body" "http://${SHELLY_HOST}/rpc" "" "" "application/json"
+  _shelly_ret=$?
+
+  if [ "$_shelly_ret" != "0" ]; then
+    _err "HTTP request failed for $_shelly_method (curl/wget error $_shelly_ret)"
+    return 1
+  fi
+
+  # Empty response means something went wrong (auth required but not provided, etc.)
+  if [ -z "$response" ]; then
+    _err "Empty response from Shelly device. If authentication is enabled on the device, set SHELLY_PASSWORD."
+    return 1
+  fi
+
+  # Validate response looks like a Shelly JSON-RPC response.
+  # Catches non-JSON responses such as HTTP 429 "Too Many Requests" which
+  # would otherwise pass the empty and "error" checks below.
+  if ! _startswith "$response" '{' || ! _contains "$response" '"id"'; then
+    _err "Invalid response from Shelly device: $response"
+    return 1
+  fi
+
+  # Check for JSON-RPC error in response
+  if _contains "$response" '"error"'; then
+    _err "RPC error from Shelly: $response"
+    return 1
+  fi
+
+  _debug "RPC response: $response"
+
+  # Increment nonce counter and rebuild auth header for next request
+  if [ -n "$_shelly_auth_header" ]; then
+    _shelly_nc=$((_shelly_nc + 1))
+    _shelly_build_auth_header
+  fi
+
+  return 0
+}
+
+# Upload the certificate to the device.
+# Note: We do NOT clear the existing certificate first, because the Shelly
+# auto-removes all three files (cert, key, CA) when any one is cleared.
+# Uploading overwrites in place — no clearing needed.
+_shelly_upload_cert() {
+  _shelly_cert_data="$(_json_encode <"$_cfullchain")"
+
+  _debug "Uploading certificate"
+  if ! _shelly_rpc "Shelly.PutHTTPServerCert" '{"data":"'"$_shelly_cert_data"'"}'; then
+    _err "Failed to upload certificate to device"
+    return 1
+  fi
+
+  return 0
+}
+
+# Upload the private key to the device.
+# Note: Do not clear first — see _shelly_upload_cert for rationale.
+_shelly_upload_key() {
+  _shelly_key_data="$(_json_encode <"$_ckey")"
+
+  _debug "Uploading key"
+  if ! _shelly_rpc "Shelly.PutHTTPServerKey" '{"data":"'"$_shelly_key_data"'"}'; then
+    _err "Failed to upload key to device"
+    return 1
+  fi
+
+  return 0
+}

deploy/ssh.sh

@@ -25,7 +25,8 @@
 # export DEPLOY_SSH_MULTI_CALL=""  # yes or no, default to no or previously saved value
 # export DEPLOY_SSH_USE_SCP="" yes or no, default to no
 # export DEPLOY_SSH_SCP_CMD="" defaults to "scp -q"
-#
+# export DEPLOY_SSH_REMOTE_SHELL="" # defaults to sh -c
+# export DEPLOY_SSH_REMOTE_CMD_QUOTE="" # yes or no, defaults to yes
 ########  Public functions #####################
 
 #domain keyfile certfile cafile fullchain
@@ -71,6 +72,24 @@ ssh_deploy() {
   fi
   _savedeployconf DEPLOY_SSH_CMD "$DEPLOY_SSH_CMD"
 
+  # REMOTE_SHELL is optional. If not provided then use sh
+  _migratedeployconf Le_Deploy_ssh_remote_shell DEPLOY_SSH_REMOTE_SHELL
+  _getdeployconf DEPLOY_SSH_REMOTE_SHELL
+  _debug2 DEPLOY_SSH_REMOTE_SHELL "$DEPLOY_SSH_REMOTE_SHELL"
+  if [ -z "$DEPLOY_SSH_REMOTE_SHELL" ]; then
+    DEPLOY_SSH_REMOTE_SHELL="sh -c"
+  fi
+  _savedeployconf DEPLOY_SSH_REMOTE_SHELL "$DEPLOY_SSH_REMOTE_SHELL"
+
+  # REMOTE_CMD_QUOTE is optional. If not provided then yes
+  _migratedeployconf Le_Deploy_ssh_remote_cmd_quote DEPLOY_SSH_REMOTE_CMD_QUOTE
+  _getdeployconf DEPLOY_SSH_REMOTE_CMD_QUOTE
+  _debug2 DEPLOY_SSH_REMOTE_CMD_QUOTE "$DEPLOY_SSH_REMOTE_CMD_QUOTE"
+  if [ -z "$DEPLOY_SSH_REMOTE_CMD_QUOTE" ]; then
+    DEPLOY_SSH_REMOTE_CMD_QUOTE="yes"
+  fi
+  _savedeployconf DEPLOY_SSH_REMOTE_CMD_QUOTE "$DEPLOY_SSH_REMOTE_CMD_QUOTE"
+
   # BACKUP is optional. If not provided then default to previously saved value or yes.
   _migratedeployconf Le_Deploy_ssh_backup DEPLOY_SSH_BACKUP
   _getdeployconf DEPLOY_SSH_BACKUP
@@ -170,10 +189,16 @@ ssh_deploy() {
     _info "Required commands batched and sent in single call to remote host"
   fi
 
+  _returnCode=0
   _deploy_ssh_servers="$DEPLOY_SSH_SERVER"
   for DEPLOY_SSH_SERVER in $_deploy_ssh_servers; do
-    _ssh_deploy
+    if ! _ssh_deploy; then
+      # in case of an error, remember it, but keep going for the remaining servers
+      _returnCode=1
+    fi
   done
+
+  return $_returnCode
 }
 
 _ssh_deploy() {
@@ -207,8 +232,6 @@ _ssh_deploy() {
 do if [ -d \"\$fn\" ] && [ \"\$(expr \$now - \$(date -ur \$fn +%s) )\" -ge \"15552000\" ]; \
 then rm -rf \"\$fn\"; echo \"Backup \$fn deleted as older than 180 days\"; fi; done; }; $_cmdstr"
     # Alternate version of above... _cmdstr="find $_backupprefix* -type d -mtime +180 2>/dev/null | xargs rm -rf; $_cmdstr"
-    # Create our backup directory for overwritten cert files.
-    _cmdstr="mkdir -p $_backupdir; $_cmdstr"
     _info "Backup of old certificate files will be placed in remote directory $_backupdir"
     _info "Backup directories erased after 180 days."
     if [ "$DEPLOY_SSH_MULTI_CALL" = "yes" ]; then
@@ -222,7 +245,7 @@ then rm -rf \"\$fn\"; echo \"Backup \$fn deleted as older than 180 days\"; fi; d
   if [ -n "$DEPLOY_SSH_KEYFILE" ]; then
     if [ "$DEPLOY_SSH_BACKUP" = "yes" ]; then
       # backup file we are about to overwrite.
-      _cmdstr="$_cmdstr cp $DEPLOY_SSH_KEYFILE $_backupdir >/dev/null;"
+      _cmdstr="$_cmdstr if [ -f $DEPLOY_SSH_KEYFILE ]; then mkdir -p $_backupdir; cp $DEPLOY_SSH_KEYFILE $_backupdir >/dev/null; fi;"
       if [ "$DEPLOY_SSH_MULTI_CALL" = "yes" ]; then
         if ! _ssh_remote_cmd "$_cmdstr"; then
           return $_err_code
@@ -259,7 +282,7 @@ then rm -rf \"\$fn\"; echo \"Backup \$fn deleted as older than 180 days\"; fi; d
       _pipe=">>"
     elif [ "$DEPLOY_SSH_BACKUP" = "yes" ]; then
       # backup file we are about to overwrite.
-      _cmdstr="$_cmdstr cp $DEPLOY_SSH_CERTFILE $_backupdir >/dev/null;"
+      _cmdstr="$_cmdstr if [ -f $DEPLOY_SSH_CERTFILE ]; then mkdir -p $_backupdir; cp $DEPLOY_SSH_CERTFILE $_backupdir >/dev/null; fi;"
       if [ "$DEPLOY_SSH_MULTI_CALL" = "yes" ]; then
         if ! _ssh_remote_cmd "$_cmdstr"; then
           return $_err_code
@@ -300,7 +323,7 @@ then rm -rf \"\$fn\"; echo \"Backup \$fn deleted as older than 180 days\"; fi; d
       _pipe=">>"
     elif [ "$DEPLOY_SSH_BACKUP" = "yes" ]; then
       # backup file we are about to overwrite.
-      _cmdstr="$_cmdstr cp $DEPLOY_SSH_CAFILE $_backupdir >/dev/null;"
+      _cmdstr="$_cmdstr if [ -f $DEPLOY_SSH_CAFILE ]; then mkdir -p $_backupdir; cp $DEPLOY_SSH_CAFILE $_backupdir >/dev/null; fi;"
       if [ "$DEPLOY_SSH_MULTI_CALL" = "yes" ]; then
         if ! _ssh_remote_cmd "$_cmdstr"; then
           return $_err_code
@@ -345,8 +368,8 @@ then rm -rf \"\$fn\"; echo \"Backup \$fn deleted as older than 180 days\"; fi; d
       _pipe=">>"
     elif [ "$DEPLOY_SSH_BACKUP" = "yes" ]; then
       # backup file we are about to overwrite.
-      _cmdstr="$_cmdstr cp $DEPLOY_SSH_FULLCHAIN $_backupdir >/dev/null;"
-      if [ "$DEPLOY_SSH_FULLCHAIN" = "yes" ]; then
+      _cmdstr="$_cmdstr if [ -f $DEPLOY_SSH_FULLCHAIN ]; then mkdir -p $_backupdir; cp $DEPLOY_SSH_FULLCHAIN $_backupdir >/dev/null; fi;"
+      if [ "$DEPLOY_SSH_MULTI_CALL" = "yes" ]; then
         if ! _ssh_remote_cmd "$_cmdstr"; then
           return $_err_code
         fi
@@ -428,9 +451,13 @@ _ssh_remote_cmd() {
   _secure_debug "Remote commands to execute: $_cmd"
   _info "Submitting sequence of commands to remote server by $_ssh_cmd"
 
-  # quotations in bash cmd below intended.  Squash travis spellcheck error
-  # shellcheck disable=SC2029
-  $_ssh_cmd "$DEPLOY_SSH_USER@$_host" sh -c "'$_cmd'"
+  if [ "$DEPLOY_SSH_REMOTE_CMD_QUOTE" = "yes" ]; then
+    # quotations in bash cmd below intended.  Squash travis spellcheck error
+    # shellcheck disable=SC2029
+    $_ssh_cmd "$DEPLOY_SSH_USER@$_host" "$DEPLOY_SSH_REMOTE_SHELL" "'$_cmd'"
+  else
+    $_ssh_cmd "$DEPLOY_SSH_USER@$_host" "$DEPLOY_SSH_REMOTE_SHELL" "$_cmd"
+  fi
   _err_code="$?"
 
   if [ "$_err_code" != "0" ]; then

deploy/synology_dsm.sh

@@ -1,4 +1,4 @@
-#!/bin/bash
+#!/usr/bin/env sh
 
 ################################################################################
 # ACME.sh 3rd party deploy plugin for Synology DSM
@@ -72,7 +72,7 @@ synology_dsm_deploy() {
 
   if [ -n "$SYNO_USE_TEMP_ADMIN" ]; then
     if ! _exists synouser || ! _exists synogroup || ! _exists synosetkeyvalue; then
-      _err "Missing required tools to creat temp admin user, please set SYNO_USERNAME and SYNO_PASSWORD instead."
+      _err "Missing required tools to create temp admin user, please set SYNO_USERNAME and SYNO_PASSWORD instead."
       _err "Notice: temp admin user authorization method only supports local deployment on DSM."
       return 1
     fi
@@ -234,11 +234,11 @@ synology_dsm_deploy() {
     fi
   fi
 
-  error_code=$(echo "$response" | grep '"error":' | grep -o '"code":[0-9]*' | grep -o '[0-9]*')
+  error_code=$(echo "$response" | grep '"error":' | grep -o '"code":[0-9]*' | grep -Eo '[0-9]+')
   _debug2 error_code "$error_code"
   # Account has 2FA-OTP enabled, since error 403 reported.
   # https://global.download.synology.com/download/Document/Software/DeveloperGuide/Os/DSM/All/enu/DSM_Login_Web_API_Guide_enu.pdf
-  if [ "$error_code" == "403" ]; then
+  if [ "$error_code" = "403" ]; then
     if [ -z "$SYNO_DEVICE_NAME" ]; then
       printf "Enter device name or leave empty for default (CertRenewal): "
       read -r SYNO_DEVICE_NAME
@@ -269,27 +269,27 @@ synology_dsm_deploy() {
         _secure_debug2 SYNO_DEVICE_ID "$SYNO_DEVICE_ID"
       fi
     fi
-    error_code=$(echo "$response" | grep '"error":' | grep -o '"code":[0-9]*' | grep -o '[0-9]*')
+    error_code=$(echo "$response" | grep '"error":' | grep -o '"code":[0-9]*' | grep -Eo '[0-9]+')
     _debug2 error_code "$error_code"
   fi
 
   if [ -n "$error_code" ]; then
-    if [ "$error_code" == "403" ] && [ -n "$SYNO_DEVICE_ID" ]; then
+    if [ "$error_code" = "403" ] && [ -n "$SYNO_DEVICE_ID" ]; then
       _cleardeployconf SYNO_DEVICE_ID
-      _err "Failed to authenticate with SYNO_DEVICE_ID (may expired or invalid), please try again in a new terminal window."
-    elif [ "$error_code" == "404" ]; then
+      _err "Failed to authenticate with SYNO_DEVICE_ID (may be expired or invalid), please try again in a new terminal window."
+    elif [ "$error_code" = "404" ]; then
       _err "Failed to authenticate with provided 2FA-OTP code, please try again in a new terminal window."
-    elif [ "$error_code" == "406" ]; then
+    elif [ "$error_code" = "406" ]; then
       if [ -n "$SYNO_USE_TEMP_ADMIN" ]; then
         _err "Failed with unexcepted error, please report this by providing full log with '--debug 3'."
       else
         _err "Enforce auth with 2FA-OTP enabled, please configure the user to enable 2FA-OTP to continue."
       fi
-    elif [ "$error_code" == "400" ]; then
+    elif [ "$error_code" = "400" ]; then
       _err "Failed to authenticate, no such account or incorrect password."
-    elif [ "$error_code" == "401" ]; then
+    elif [ "$error_code" = "401" ]; then
       _err "Failed to authenticate with a non-existent account."
-    elif [ "$error_code" == "408" ] || [ "$error_code" == "409" ] || [ "$error_code" == "410" ]; then
+    elif [ "$error_code" = "408" ] || [ "$error_code" = "409" ] || [ "$error_code" = "410" ]; then
       _err "Failed to authenticate, the account password has expired or must be changed."
     else
       _err "Failed to authenticate with error: $error_code."
@@ -322,8 +322,8 @@ synology_dsm_deploy() {
     _savedeployconf SYNO_USE_TEMP_ADMIN "$SYNO_USE_TEMP_ADMIN"
     _savedeployconf SYNO_LOCAL_HOSTNAME "$SYNO_LOCAL_HOSTNAME"
   else
-    _savedeployconf SYNO_USERNAME "$SYNO_USERNAME"
-    _savedeployconf SYNO_PASSWORD "$SYNO_PASSWORD"
+    _savedeployconf SYNO_USERNAME "$SYNO_USERNAME" "base64"
+    _savedeployconf SYNO_PASSWORD "$SYNO_PASSWORD" "base64"
     _savedeployconf SYNO_DEVICE_ID "$SYNO_DEVICE_ID"
     _savedeployconf SYNO_DEVICE_NAME "$SYNO_DEVICE_NAME"
   fi
@@ -336,7 +336,7 @@ synology_dsm_deploy() {
   id=$(echo "$response" | sed -n "s/.*\"desc\":\"$escaped_certificate\",\"id\":\"\([^\"]*\).*/\1/p")
   _debug2 id "$id"
 
-  error_code=$(echo "$response" | grep '"error":' | grep -o '"code":[0-9]*' | grep -o '[0-9]*')
+  error_code=$(echo "$response" | grep '"error":' | grep -o '"code":[0-9]*' | grep -Eo '[0-9]+')
   _debug2 error_code "$error_code"
   if [ -n "$error_code" ]; then
     if [ "$error_code" -eq 105 ]; then
@@ -344,6 +344,7 @@ synology_dsm_deploy() {
     else
       _err "Failed to fetch certificate info: $error_code, please try again or contact Synology to learn more."
     fi
+    _logout
     _temp_admin_cleanup "$SYNO_USE_TEMP_ADMIN" "$SYNO_USERNAME"
     return 1
   fi
@@ -354,6 +355,7 @@ synology_dsm_deploy() {
 
   if [ -z "$id" ] && [ -z "$SYNO_CREATE" ]; then
     _err "Unable to find certificate: $SYNO_CERTIFICATE and \$SYNO_CREATE is not set."
+    _logout
     _temp_admin_cleanup "$SYNO_USE_TEMP_ADMIN" "$SYNO_USERNAME"
     return 1
   fi
@@ -389,13 +391,13 @@ synology_dsm_deploy() {
     else
       _info "Restart HTTP services not necessary."
     fi
-    _temp_admin_cleanup "$SYNO_USE_TEMP_ADMIN" "$SYNO_USERNAME"
     _logout
+    _temp_admin_cleanup "$SYNO_USE_TEMP_ADMIN" "$SYNO_USERNAME"
     return 0
   else
-    _temp_admin_cleanup "$SYNO_USE_TEMP_ADMIN" "$SYNO_USERNAME"
     _err "Unable to update certificate, got error response: $response."
     _logout
+    _temp_admin_cleanup "$SYNO_USE_TEMP_ADMIN" "$SYNO_USERNAME"
     return 1
   fi
 }
@@ -403,6 +405,8 @@ synology_dsm_deploy() {
 ####################  Private functions below ##################################
 _logout() {
   # Logout CERT user only to not occupy a permanent session, e.g. in DSM's "Connected Users" widget (based on previous variables)
+  # Must be called before _temp_admin_cleanup: once the temp admin is deleted, its session can no longer be logged out.
+  # Note: this overwrites $response, so print any error message that needs it before calling.
   response=$(_get "$_base_url/webapi/$api_path?api=SYNO.API.Auth&version=$api_version&method=logout&_sid=$sid")
   _debug3 response "$response"
 }
@@ -424,11 +428,6 @@ _temp_admin_cleanup() {
   fi
 }
 
-#_cleardeployconf   key
-_cleardeployconf() {
-  _cleardomainconf "SAVED_$1"
-}
-
 # key
 _check2cleardeployconfexp() {
   _key="$1"

deploy/truenas_websocat.sh

@@ -0,0 +1,518 @@
+#!/usr/bin/env sh
+# shellcheck disable=SC2016
+# TrueNAS deploy script for SCALE/CORE using websocket (websocat binary)
+# It is recommend to use a wildcard certificate
+#
+# Tested with TrueNAS SCALE 25.10 (API "wss://host/api/current", JSON-RPC 2.0).
+#
+# Unlike "truenas_ws" hook, this script does NOT use midclt, the truenas_api_client Python package.
+# It only depends on:
+#   - jq
+#   - websocat  (a static binary you deploy)
+#
+# Why: avoids installing a Python environment / TrueNAS package on remote machine just to push a certificate.
+#
+# IMPORTANT: This script is written in pure POSIX sh (no coproc, no bash arrays).
+#
+#
+# ---------------------------------------------------------------------------
+# Environment variables
+# ---------------------------------------------------------------------------
+#
+# # Use the folowing URL to create a new API token: <TRUENAS_HOSTNAME OR IP>/ui/apikeys
+#
+# Required:
+#   export DEPLOY_TRUENAS_APIKEY="<API_KEY_GENERATED_IN_THE_WEB_UI>"
+#
+# Optional:
+#   export DEPLOY_TRUENAS_HOSTNAME="<TRUENAS_HOSTNAME_OR_IP>"  (required on first run)
+#   export DEPLOY_TRUENAS_PROTOCOL="ws"   # ws or wss      (default: ws)
+#   export DEPLOY_TRUENAS_PORT="80"       # 80, 443, 8443  (default: 80)
+#     NOTE: defaults are intentionally "ws"/80, not "wss"/443: a freshly
+#     installed TrueNAS serves its Web UI over plain HTTP on port 80 out
+#     of the box, and port 443 is not listening until HTTPS is configured.
+#     Port 80 stays reachable even after HTTPS is enabled, so this keeps
+#     the hook working on first run without extra setup.
+#   export DEPLOY_TRUENAS_UPDATE_FTP="no"   # yes or no  (default: no) also updates the FTP certificate
+#   export DEPLOY_TRUENAS_UPDATE_APPS="no"  # yes or no  (default: no) also updates the certificate for any
+#     iX app exposing a "certificate_id" option.
+#     WARNING: this redeploys (restarts) every matching app.
+# ---------------------------------------------------------------------------
+
+########################
+### Public functions ###
+########################
+
+# truenas_websocat_deploy
+#
+# Deploy new certificate to TrueNAS services with websocat binary
+#
+# Arguments
+#  1: Domain
+#  2: Key-File
+#  3: Certificate-File
+#  4: CA-File
+#  5: FullChain-File
+# Returns:
+#  0: Success
+#  1: Missing or invalid API Key
+#  2: TrueNAS not ready (health check failed)
+#  3: (reserved)
+#  4: FTP & iX App cert error
+#  5: WebUI cert error
+#  6: Certificate creation job error
+#  7: Websocat / transport call error (socket write/read failed)
+#  8: Missing binary or invalid configuration
+#  9: TrueNAS API returned an explicit error (JSON-RPC .error field)
+
+truenas_websocat_deploy() {
+  _jq_bin=$(command -v jq 2>/dev/null)
+  if [ -z "$_jq_bin" ]; then
+    _err "jq binary not found in PATH. Install it using your system's package manager."
+    return 8
+  fi
+  _websocat_bin=$(command -v websocat 2>/dev/null)
+  if [ -z "$_websocat_bin" ]; then
+    _err "websocat binary not found in PATH. Install it using your system's package manager, or download a static binary from https://github.com/vi/websocat/releases."
+    return 8
+  fi
+
+  _domain="$1"
+  _file_key="$2"
+  _file_cert="$3"
+  _file_cca="$4"
+  _file_fullchain="$5"
+  _debug _domain "$_domain"
+  _debug _file_key "$_file_key"
+  _debug _file_cert "$_file_cert"
+  _debug _file_ca "$_file_cca"
+  _debug _file_fullchain "$_file_fullchain"
+
+  if [ ! -x "$_jq_bin" ]; then
+    _err "Binary not found or not executable: $_jq_bin"
+    return 8
+  fi
+  if [ ! -x "$_websocat_bin" ]; then
+    _err "Binary not found or not executable: $_websocat_bin"
+    return 8
+  fi
+
+  ### ---- Configuration ----
+
+  _info "Checking environment variables..."
+  _getdeployconf DEPLOY_TRUENAS_APIKEY
+  _getdeployconf DEPLOY_TRUENAS_HOSTNAME
+  _getdeployconf DEPLOY_TRUENAS_PROTOCOL
+  _getdeployconf DEPLOY_TRUENAS_PORT
+  _getdeployconf DEPLOY_TRUENAS_UPDATE_FTP
+  _getdeployconf DEPLOY_TRUENAS_UPDATE_APPS
+
+  # Check API Key
+  if [ -z "$DEPLOY_TRUENAS_APIKEY" ]; then
+    _err "TrueNAS API key not found, please set the DEPLOY_TRUENAS_APIKEY environment variable."
+    return 1
+  fi
+  # Check Hostname, default to localhost if not set
+  if [ -z "$DEPLOY_TRUENAS_HOSTNAME" ]; then
+    _info "TrueNAS hostname not set. Using 'localhost'."
+    DEPLOY_TRUENAS_HOSTNAME="localhost"
+  fi
+
+  # Check protocol, default to ws if not set: a freshly installed TrueNAS serves its Web UI over plain HTTP, so wss/443 is not available out of the box.
+  # Use DEPLOY_TRUENAS_PROTOCOL="wss" once HTTPS is configured, since the payload otherwise carries the API key and private key in plain text.
+  if [ -z "$DEPLOY_TRUENAS_PROTOCOL" ]; then
+    _info "TrueNAS protocol not set. Using 'ws'."
+    DEPLOY_TRUENAS_PROTOCOL="ws"
+  fi
+
+  # Check port, default to 80 if not set (see protocol comment above)
+  if [ -z "$DEPLOY_TRUENAS_PORT" ]; then
+    _info "TrueNAS port not set. Using '80'."
+    DEPLOY_TRUENAS_PORT="80"
+  fi
+  case "$DEPLOY_TRUENAS_PORT" in
+  '' | *[!0-9]*)
+    _err "Invalid TrueNAS port '$DEPLOY_TRUENAS_PORT'. DEPLOY_TRUENAS_PORT must be numeric."
+    return 8
+    ;;
+  esac
+
+  _truenas_websocat_uri="$DEPLOY_TRUENAS_PROTOCOL://$DEPLOY_TRUENAS_HOSTNAME:$DEPLOY_TRUENAS_PORT/api/current"
+
+  # Check FTP update, default to no if not set
+  if [ -z "$DEPLOY_TRUENAS_UPDATE_FTP" ]; then
+    _info "Certificate update for FTP is not set. Using 'no'."
+    DEPLOY_TRUENAS_UPDATE_FTP="no"
+  fi
+
+  # Check Apps update, default to no if not set
+  if [ -z "$DEPLOY_TRUENAS_UPDATE_APPS" ]; then
+    _info "Certificate update for Apps is not set. Using 'no'."
+    DEPLOY_TRUENAS_UPDATE_APPS="no"
+  fi
+
+  _debug2 DEPLOY_TRUENAS_HOSTNAME "$DEPLOY_TRUENAS_HOSTNAME"
+  _debug2 DEPLOY_TRUENAS_PROTOCOL "$DEPLOY_TRUENAS_PROTOCOL"
+  _debug2 DEPLOY_TRUENAS_UPDATE_FTP "$DEPLOY_TRUENAS_UPDATE_FTP"
+  _debug2 DEPLOY_TRUENAS_UPDATE_APPS "$DEPLOY_TRUENAS_UPDATE_APPS"
+  _debug _truenas_websocat_uri "$_truenas_websocat_uri"
+  _secure_debug2 DEPLOY_TRUENAS_APIKEY "$DEPLOY_TRUENAS_APIKEY"
+  _info "Environment variables: OK"
+
+  ### ---- Persistent WebSocket connection (FIFOs, sh/dash compatible) ----
+  #
+  # Authentication is tied to the WebSocket connection:
+  # the SAME connection must stay open from login until the end, otherwise every subsequent call comes back unauthenticated.
+  # We use two FIFOs + `exec` to talk to a background websocat process, without relying on bash-only extensions.
+
+  _websocat_tmpdir=$(mktemp -d /tmp/truenas_websocat.XXXXXX) || {
+    _err "mktemp failed"
+    return 3
+  }
+  _websocat_fifo_in="${_websocat_tmpdir}/in"
+  _websocat_fifo_out="${_websocat_tmpdir}/out"
+  mkfifo "$_websocat_fifo_in" "$_websocat_fifo_out" || {
+    _err "mkfifo failed"
+    rm -rf "$_websocat_tmpdir"
+    return 3
+  }
+
+  "$_websocat_bin" -n -k "$_truenas_websocat_uri" <"$_websocat_fifo_in" >"$_websocat_fifo_out" 2>"${_websocat_tmpdir}/err.log" &
+  _websocat_pid=$!
+
+  # Opening "in" for read+write avoids a deadlock if websocat hasn't opened the fifo for reading yet at the time we write to it.
+  exec 3<>"$_websocat_fifo_in"
+  exec 4<"$_websocat_fifo_out"
+
+  sleep 1
+  if ! kill -0 "$_websocat_pid" 2>/dev/null; then
+    _err "websocat exited prematurely."
+    _err "$(cat "${_websocat_tmpdir}/err.log" 2>/dev/null)"
+    exec 3>&- 4<&-
+    rm -rf "$_websocat_tmpdir"
+    return 3
+  fi
+
+  _websocat_req_counter=0
+
+  _truenas_websocat_cleanup() {
+    exec 3>&- 2>/dev/null
+    exec 4<&- 2>/dev/null
+    [ -n "$_websocat_pid" ] && kill "$_websocat_pid" 2>/dev/null
+    rm -rf "$_websocat_tmpdir" 2>/dev/null
+  }
+
+  # _truenas_websocat_rpc_call <method> <json_params>
+  # Does NOT log the payload/response: some calls (certificate.create, core.get_jobs) contain the certificate and private key in plain text, which would massively bloat the logs.
+  _truenas_websocat_rpc_call() {
+    _truenas_websocat_method="$1"
+    _truenas_websocat_params="$2"
+    _websocat_req_counter=$((_websocat_req_counter + 1))
+    _req_id="$_websocat_req_counter"
+
+    _truenas_websocat_payload=$("$_jq_bin" -c -n \
+      --arg jsonrpc "2.0" \
+      --arg id "$_req_id" \
+      --arg method "$_truenas_websocat_method" \
+      --argjson params "$_truenas_websocat_params" \
+      '{jsonrpc: $jsonrpc, id: $id, method: $method, params: $params}')
+
+    printf '%s\n' "$_truenas_websocat_payload" >&3 || {
+      _err "Socket write failed (method: $_truenas_websocat_method)"
+      return 7
+    }
+    IFS= read -r _truenas_websocat_response <&4 || {
+      _err "Socket read failed (method: $_truenas_websocat_method)"
+      return 7
+    }
+
+    printf '%s' "$_truenas_websocat_response"
+  }
+
+  # _truenas_websocat_rpc_has_error <response> <label> -> returns 0 (and prints) if an error was found, 1 otherwise
+  _truenas_websocat_rpc_has_error() {
+    _msg=$(printf '%s' "$1" | "$_jq_bin" -r '.error.message // empty' 2>/dev/null)
+    if [ -n "$_msg" ]; then
+      _err "RPC error ($2): $_msg"
+      return 0
+    fi
+    return 1
+  }
+
+  # Polls once per second and gives up after _TRUENAS_WEBSOCAT_JOB_TIMEOUT seconds (default 60s)
+  # if the job never leaves RUNNING/WAITING, so a stuck TrueNAS job cannot hang the deploy hook forever.
+  # NOTE: this same timeout also bounds app.update jobs when DEPLOY_TRUENAS_UPDATE_APPS=yes (iX App redeploy)
+  # raise _TRUENAS_WEBSOCAT_JOB_TIMEOUT if an app takes longer than that to redeploy (e.g. image pull, migrations).
+
+  _truenas_websocat_wait_for_job() {
+    _jobid="$1"
+    _truenas_websocat_job_elapsed=0
+    _truenas_websocat_job_timeout="${_TRUENAS_WEBSOCAT_JOB_TIMEOUT:-60}"
+    while true; do
+      if [ "$_truenas_websocat_job_elapsed" -ge "$_truenas_websocat_job_timeout" ]; then
+        _err "Job $_jobid: timed out after ${_truenas_websocat_job_timeout}s."
+        return 6
+      fi
+      sleep 1
+      _truenas_websocat_job_elapsed=$((_truenas_websocat_job_elapsed + 1))
+      _job_resp=$(_truenas_websocat_rpc_call "core.get_jobs" "[[[\"id\",\"=\",${_jobid}]]]") || return 6
+      if _truenas_websocat_rpc_has_error "$_job_resp" "core.get_jobs"; then return 6; fi
+      _state=$(printf '%s' "$_job_resp" | "$_jq_bin" -r '.result[0].state // empty')
+      case "$_state" in
+      SUCCESS)
+        printf '%s' "$_job_resp" | "$_jq_bin" -c '.result[0].result'
+        return 0
+        ;;
+      FAILED | ABORTED)
+        _err "Job $_jobid failed: $(printf '%s' "$_job_resp" | "$_jq_bin" -c '.result[0].error')"
+        return 6
+        ;;
+      "")
+        _err "Job $_jobid: unexpected response."
+        return 6
+        ;;
+      esac
+    done
+  }
+
+  ### ---- 1. Health check ----
+
+  _info "Testing connection to TrueNAS WebSocket at $_truenas_websocat_uri..."
+  _ping_resp=$(_truenas_websocat_rpc_call "core.ping" "[]") || {
+    _truenas_websocat_cleanup
+    return 7
+  }
+  if _truenas_websocat_rpc_has_error "$_ping_resp" "core.ping"; then
+    _truenas_websocat_cleanup
+    return 9
+  fi
+  if [ "$(printf '%s' "$_ping_resp" | "$_jq_bin" -r '.result // empty')" != "pong" ]; then
+    _err "Health check failed (no pong received)."
+    _truenas_websocat_cleanup
+    return 2
+  fi
+  _info "Health check OK (pong received)."
+
+  ### ---- 2. Authentication & Check ----
+
+  _info "Authenticating with API Key..."
+  _key_params=$("$_jq_bin" -c -n --arg k "$DEPLOY_TRUENAS_APIKEY" '[$k]')
+  _auth_resp=$(_truenas_websocat_rpc_call "auth.login_with_api_key" "$_key_params") || {
+    _truenas_websocat_cleanup
+    return 7
+  }
+  if _truenas_websocat_rpc_has_error "$_auth_resp" "auth.login_with_api_key"; then
+    _truenas_websocat_cleanup
+    return 9
+  fi
+  if [ "$(printf '%s' "$_auth_resp" | "$_jq_bin" -r '.result // empty')" != "true" ]; then
+    _err "Authentication failed (invalid API key?)."
+    _truenas_websocat_cleanup
+    return 1
+  fi
+  _info "Connected to TrueNAS ($_truenas_websocat_uri)."
+
+  _savedeployconf DEPLOY_TRUENAS_APIKEY "$DEPLOY_TRUENAS_APIKEY"
+  _savedeployconf DEPLOY_TRUENAS_HOSTNAME "$DEPLOY_TRUENAS_HOSTNAME"
+  _savedeployconf DEPLOY_TRUENAS_PROTOCOL "$DEPLOY_TRUENAS_PROTOCOL"
+  _savedeployconf DEPLOY_TRUENAS_PORT "$DEPLOY_TRUENAS_PORT"
+  _savedeployconf DEPLOY_TRUENAS_UPDATE_FTP "$DEPLOY_TRUENAS_UPDATE_FTP"
+  _savedeployconf DEPLOY_TRUENAS_UPDATE_APPS "$DEPLOY_TRUENAS_UPDATE_APPS"
+
+  _info "Checking TrueNAS system version..."
+  _ver_resp=$(_truenas_websocat_rpc_call "system.info" "[]") || {
+    _truenas_websocat_cleanup
+    return 7
+  }
+  if _truenas_websocat_rpc_has_error "$_ver_resp" "system.info"; then
+    _truenas_websocat_cleanup
+    return 9
+  fi
+  _sys_version=$(printf '%s' "$_ver_resp" | "$_jq_bin" -r '.result.version // .result // "Unknown"')
+  _info "TrueNAS System Version: $_sys_version"
+
+  ### ---- 3. Read certificate files ----
+
+  _info "Reading certificate files for $_domain..."
+  if [ ! -f "$_file_fullchain" ] || [ ! -f "$_file_key" ]; then
+    _err "Certificate or key file not found."
+    _truenas_websocat_cleanup
+    return 5
+  fi
+  _cert_content=$("$_jq_bin" -sR . "$_file_fullchain")
+  _key_content=$("$_jq_bin" -sR . "$_file_key")
+
+  _safe_domain=$(echo "$_domain" | tr '*.' '_')
+  _cert_name="acme_${_safe_domain}_$(date +%Y%m%d_%H%M%S)"
+  _debug _certname "$_cert_name"
+
+  ### ---- 4. Current Web UI certificate ----
+
+  _info "Retrieving current Web UI configuration..."
+  _config_resp=$(_truenas_websocat_rpc_call "system.general.config" "[]") || {
+    _truenas_websocat_cleanup
+    return 7
+  }
+  if _truenas_websocat_rpc_has_error "$_config_resp" "system.general.config"; then
+    _truenas_websocat_cleanup
+    return 9
+  fi
+  _old_cert_id=$(printf '%s' "$_config_resp" | "$_jq_bin" -r '.result.ui_certificate.id // .result.ui_certificate // empty')
+  _info "Current Web UI Certificate ID: ${_old_cert_id:-None}"
+
+  ### ---- 5. Import the new certificate (asynchronous job) ----
+
+  _info "Importing new certificate '$_cert_name'..."
+  _create_params=$("$_jq_bin" -n \
+    --arg name "$_cert_name" \
+    --argjson cert "$_cert_content" \
+    --argjson key "$_key_content" \
+    '[{create_type: "CERTIFICATE_CREATE_IMPORTED", name: $name, certificate: $cert, privatekey: $key}]')
+
+  _new_cert_resp=$(_truenas_websocat_rpc_call "certificate.create" "$_create_params") || {
+    _truenas_websocat_cleanup
+    return 7
+  }
+  if _truenas_websocat_rpc_has_error "$_new_cert_resp" "certificate.create"; then
+    _truenas_websocat_cleanup
+    return 9
+  fi
+  _new_cert_jobid=$(printf '%s' "$_new_cert_resp" | "$_jq_bin" -r '.result // empty')
+
+  case "$_new_cert_jobid" in
+  '' | *[!0-9]*)
+    _err "Unexpected response from certificate.create (expected a job ID)."
+    _truenas_websocat_cleanup
+    return 6
+    ;;
+  esac
+
+  _info "Import job certificate started (job ID: $_new_cert_jobid), waiting..."
+  _job_result=$(_truenas_websocat_wait_for_job "$_new_cert_jobid") || {
+    _truenas_websocat_cleanup
+    return 6
+  }
+  _new_cert_id=$(printf '%s' "$_job_result" | "$_jq_bin" -r '.id // empty')
+
+  if [ -z "$_new_cert_id" ]; then
+    _err "Could not retrieve the imported certificate's ID."
+    _truenas_websocat_cleanup
+    return 6
+  fi
+  _info "Certificate imported: '$_cert_name' (ID $_new_cert_id)."
+
+  ### ---- 6. Assign to the Web UI ----
+
+  _info "Assigning certificate ID $_new_cert_id to Web UI..."
+  _update_resp=$(_truenas_websocat_rpc_call "system.general.update" "[{\"ui_certificate\": ${_new_cert_id}}]") || {
+    _truenas_websocat_cleanup
+    return 7
+  }
+  if _truenas_websocat_rpc_has_error "$_update_resp" "system.general.update"; then
+    _truenas_websocat_cleanup
+    return 9
+  fi
+  _assigned_id=$(printf '%s' "$_update_resp" | "$_jq_bin" -r '.result.ui_certificate.id // .result.ui_certificate // empty')
+
+  if [ "$_assigned_id" != "$_new_cert_id" ]; then
+    _err "Failed to assign the certificate to the Web UI."
+    _truenas_websocat_cleanup
+    return 5
+  fi
+
+  _info "Restarting TrueNAS Web UI service..."
+  _restart_resp=$(_truenas_websocat_rpc_call "system.general.ui_restart" "[]")
+  _truenas_websocat_rpc_has_error "$_restart_resp" "system.general.ui_restart"
+  _info "Web UI certificate updated and UI restarted."
+  # Need TrueNas to sleep before perform other actions
+  _info "Waiting for Web UI restart."
+  sleep 5
+
+  ### ---- 7. FTP (optional) ----
+
+  if [ "$DEPLOY_TRUENAS_UPDATE_FTP" = "yes" ]; then
+    _info "Sending certicate for FTP service..."
+    _ftp_resp=$(_truenas_websocat_rpc_call "ftp.update" "[{\"ssltls_certificate\": ${_new_cert_id}}]") || {
+      _truenas_websocat_cleanup
+      return 4
+    }
+    if _truenas_websocat_rpc_has_error "$_ftp_resp" "ftp.update"; then
+      _err "Failed to update the FTP certificate."
+      _truenas_websocat_cleanup
+      return 4
+    else
+      _ftp_certid=$(printf '%s' "$_ftp_resp" | "$_jq_bin" -r '.result.ssltls_certificate // empty')
+      if [ "$_ftp_certid" = "$_new_cert_id" ]; then
+        _info "FTP certificate updated."
+      else
+        _err "FTP certificate: unexpected response."
+        _truenas_websocat_cleanup
+        return 4
+      fi
+    fi
+  fi
+
+  ### ---- 8. iX Apps (optional - redeploys every matching app) ----
+
+  if [ "$DEPLOY_TRUENAS_UPDATE_APPS" = "yes" ]; then
+    _info "Sending certicate for iX Apps..."
+    _apps_resp=$(_truenas_websocat_rpc_call "app.query" "[]") || {
+      _truenas_websocat_cleanup
+      return 4
+    }
+    if _truenas_websocat_rpc_has_error "$_apps_resp" "app.query"; then
+      _err "Could not list apps."
+      _truenas_websocat_cleanup
+      return 4
+    else
+      for _app_name in $(printf '%s' "$_apps_resp" | "$_jq_bin" -r '.result[].name'); do
+        _app_cfg=$(_truenas_websocat_rpc_call "app.config" "[\"${_app_name}\"]") || {
+          _truenas_websocat_cleanup
+          return 4
+        }
+        _has_cert_opt=$(printf '%s' "$_app_cfg" | "$_jq_bin" -r '.result.network // {} | has("certificate_id")' 2>/dev/null)
+        if [ "$_has_cert_opt" = "true" ]; then
+          _info "Updating certificate for app '$_app_name' (this will redeploy it)..."
+          _app_update_resp=$(_truenas_websocat_rpc_call "app.update" "[\"${_app_name}\", {\"values\": {\"network\": {\"certificate_id\": ${_new_cert_id}}}}]") || {
+            _truenas_websocat_cleanup
+            return 4
+          }
+          _app_jobid=$(printf '%s' "$_app_update_resp" | "$_jq_bin" -r '.result // empty')
+          case "$_app_jobid" in
+          '' | *[!0-9]*)
+            _err "App '$_app_name': no job ID returned."
+            _truenas_websocat_cleanup
+            return 4
+            ;;
+          *)
+            if ! _truenas_websocat_wait_for_job "$_app_jobid" >/dev/null; then
+              _err "App '$_app_name': update not confirmed."
+              _truenas_websocat_cleanup
+              return 4
+            fi
+            ;;
+          esac
+        fi
+      done
+    fi
+  fi
+
+  ### ---- 9. Delete the old certificate (non blocking) ----
+
+  if [ -n "$_old_cert_id" ] && [ "$_old_cert_id" != "$_new_cert_id" ] && [ "$_old_cert_id" != "null" ]; then
+    _del_resp=$(_truenas_websocat_rpc_call "certificate.delete" "[${_old_cert_id}]")
+    if ! _truenas_websocat_rpc_has_error "$_del_resp" "certificate.delete"; then
+      _del_jobid=$(printf '%s' "$_del_resp" | "$_jq_bin" -r '.result // empty')
+      case "$_del_jobid" in
+      '' | *[!0-9]*) : ;;
+      *)
+        _truenas_websocat_wait_for_job "$_del_jobid" >/dev/null || _info "Old certificate: deletion not confirmed ."
+        ;;
+      esac
+    fi
+  fi
+
+  _truenas_websocat_cleanup
+  _info "TrueNAS deployment completed successfully."
+  return 0
+}

deploy/truenas_ws.sh

@@ -16,7 +16,12 @@
 #
 # # API KEY
 # # Use the folowing URL to create a new API token: <TRUENAS_HOSTNAME OR IP>/ui/apikeys
-# export DEPLOY_TRUENAS_APIKEY="<API_KEY_GENERATED_IN_THE_WEB_UI"
+# export DEPLOY_TRUENAS_APIKEY="<API_KEY_GENERATED_IN_THE_WEB_UI>"
+# Optional:
+# export DEPLOY_TRUENAS_HOSTNAME="<TRUENAS_HOSTNAME_OR_IP>"
+# export DEPLOY_TRUENAS_PROTOCOL="wss"   # ws or wss
+# export DEPLOY_TRUENAS_PORT="443"       # optional, e.g. 80, 443, 8443
+
 #
 
 ### Private functions
@@ -38,15 +43,15 @@ _ws_call() {
   _debug "_ws_call arg1" "$1"
   _debug "_ws_call arg2" "$2"
   _debug "_ws_call arg3" "$3"
-  if [ $# -eq 3 ]; then
-    _ws_response=$(midclt --uri "$_ws_uri" -K "$DEPLOY_TRUENAS_APIKEY" call "$1" "$2" "$3")
-  fi
-  if [ $# -eq 2 ]; then
-    _ws_response=$(midclt --uri "$_ws_uri" -K "$DEPLOY_TRUENAS_APIKEY" call "$1" "$2")
-  fi
-  if [ $# -eq 1 ]; then
-    _ws_response=$(midclt --uri "$_ws_uri" -K "$DEPLOY_TRUENAS_APIKEY" call "$1")
-  fi
+
+  # TrueNAS 26.0.0-BETA3 and later need a --plain option for midclt call, detect if it is available
+  _midclt_plain=""
+  case "$(midclt --help 2>/dev/null)" in
+  *--plain*) _midclt_plain="--plain" ;;
+  esac
+
+  _ws_response=$(midclt --uri "$_ws_uri" -K "$DEPLOY_TRUENAS_APIKEY" $_midclt_plain call "$@")
+
   _debug "_ws_response" "$_ws_response"
   printf "%s" "$_ws_response"
   return 0
@@ -56,7 +61,6 @@ _ws_call() {
 _ws_upload_cert() {
 
   /usr/bin/env python - <<EOF
-
 import sys
 
 from truenas_api_client import Client
@@ -78,7 +82,6 @@ with Client(uri="$_ws_uri") as c:
     print("R:0")
     print("E:_ws_upload_cert error!")
     sys.exit(7)
-
 EOF
 
   return $?
@@ -181,6 +184,8 @@ truenas_ws_deploy() {
   _getdeployconf DEPLOY_TRUENAS_APIKEY
   _getdeployconf DEPLOY_TRUENAS_HOSTNAME
   _getdeployconf DEPLOY_TRUENAS_PROTOCOL
+  _getdeployconf DEPLOY_TRUENAS_PORT
+
   # Check API Key
   if [ -z "$DEPLOY_TRUENAS_APIKEY" ]; then
     _err "TrueNAS API key not found, please set the DEPLOY_TRUENAS_APIKEY environment variable."
@@ -196,7 +201,21 @@ truenas_ws_deploy() {
     _info "TrueNAS protocol not set. Using 'ws'."
     DEPLOY_TRUENAS_PROTOCOL="ws"
   fi
-  _ws_uri="$DEPLOY_TRUENAS_PROTOCOL://$DEPLOY_TRUENAS_HOSTNAME/websocket"
+
+  # Check port, optional
+  if [ -n "$DEPLOY_TRUENAS_PORT" ]; then
+    case "$DEPLOY_TRUENAS_PORT" in
+    '' | *[!0-9]*)
+      _err "Invalid TrueNAS port '$DEPLOY_TRUENAS_PORT'. DEPLOY_TRUENAS_PORT must be numeric."
+      return 8
+      ;;
+    esac
+
+    _ws_uri="$DEPLOY_TRUENAS_PROTOCOL://$DEPLOY_TRUENAS_HOSTNAME:$DEPLOY_TRUENAS_PORT/websocket"
+  else
+    _ws_uri="$DEPLOY_TRUENAS_PROTOCOL://$DEPLOY_TRUENAS_HOSTNAME/websocket"
+  fi
+
   _debug2 DEPLOY_TRUENAS_HOSTNAME "$DEPLOY_TRUENAS_HOSTNAME"
   _debug2 DEPLOY_TRUENAS_PROTOCOL "$DEPLOY_TRUENAS_PROTOCOL"
   _debug _ws_uri "$_ws_uri"
@@ -216,13 +235,14 @@ truenas_ws_deploy() {
 
   if [ "$_ws_response" != "TRUE" ]; then
     _err "TrueNAS is not ready."
-    _err "Please check environment variables DEPLOY_TRUENAS_APIKEY, DEPLOY_TRUENAS_HOSTNAME and DEPLOY_TRUENAS_PROTOCOL."
+    _err "Please check environment variables DEPLOY_TRUENAS_APIKEY, DEPLOY_TRUENAS_HOSTNAME, DEPLOY_TRUENAS_PROTOCOL and DEPLOY_TRUENAS_PORT."
     _err "Verify API key."
     return 2
   fi
   _savedeployconf DEPLOY_TRUENAS_APIKEY "$DEPLOY_TRUENAS_APIKEY"
   _savedeployconf DEPLOY_TRUENAS_HOSTNAME "$DEPLOY_TRUENAS_HOSTNAME"
   _savedeployconf DEPLOY_TRUENAS_PROTOCOL "$DEPLOY_TRUENAS_PROTOCOL"
+  _savedeployconf DEPLOY_TRUENAS_PORT "$DEPLOY_TRUENAS_PORT"
   _info "TrueNAS health: OK"
 
   ########## System info
@@ -236,8 +256,8 @@ truenas_ws_deploy() {
 
   _info "Gather current WebUI certificate..."
   _ws_response="$(_ws_call "system.general.config")"
-  _ui_certificate_id=$(printf "%s" "$_ws_response" | jq -r '."ui_certificate"."id"')
-  _ui_certificate_name=$(printf "%s" "$_ws_response" | jq -r '."ui_certificate"."name"')
+  _ui_certificate_id=$(printf "%s" "$_ws_response" | jq -r '.ui_certificate | if type == "object" then .id else . end')
+  _ui_certificate_name=$(printf "%s" "$_ws_response" | jq -r 'if (.ui_certificate | type) == "object" then .ui_certificate.name else .ui_certificate_name end')
   _info "Current WebUI certificate ID: $_ui_certificate_id"
   _info "Current WebUI certificate name: $_ui_certificate_name"
 
@@ -312,7 +332,7 @@ truenas_ws_deploy() {
 
   _info "Replace WebUI certificate..."
   _ws_response=$(_ws_call "system.general.update" "{\"ui_certificate\": $_new_certid}")
-  _changed_certid=$(printf "%s" "$_ws_response" | jq -r '."ui_certificate"."id"')
+  _changed_certid=$(printf "%s" "$_ws_response" | jq -r '.ui_certificate | if type == "object" then .id else . end')
   if [ "$_changed_certid" != "$_new_certid" ]; then
     _err "WebUI certificate change error.."
     return 5

deploy/unifios.sh

@@ -0,0 +1,341 @@
+#!/usr/bin/env sh
+# Deploy hook for UniFi OS, via the certificate REST API.
+#
+# Works against any UniFi OS whose management UI exposes
+# /api/userCertificates. Confirmed on:
+#   - UniFi OS Server (the separately-installed, self-hosted application)
+#     on macOS and on Linux. Windows should also work (it runs under
+#     WSL2), but has not been tested.
+#         Tested on: Ubuntu 26.04 (remote) and macOS 26.6 (local).
+#   - UniFi OS hardware: UDM Pro on UniFi OS 5.1.26, UCG Fiber on
+#     UniFi OS 5.0.16 (user reports, see issues 7184 and 6916).
+# No lower version bound is claimed -- if the UI has a certificate
+# manager, this hook should work.
+#
+# `unifios` vs `unifi`: the split is the access method, not the product
+# line. `unifi` writes files / a Java keystore and needs local or SSH
+# access on the device; this hook drives the same REST API the web UI
+# uses and works remotely. Use `unifi` where acme.sh runs on the device
+# itself, this hook where it does not.
+#
+# The API is served on the management port, which differs per install:
+# UniFi OS Server listens on 11443 (hence the default below), while
+# UniFi OS hardware serves it on 443 -- set DEPLOY_UNIFIOS_HOST to
+# "https://<host>" there.
+#
+# Endpoints used, all as the web UI itself calls them:
+#   POST   /api/auth/login                  - session login (cookie + JWT)
+#   GET    /api/userCertificates             - list uploaded certificates
+#   POST   /api/userCertificates             - upload a new certificate
+#   DELETE /api/userCertificates/{id}         - remove a certificate
+#   PUT    /api/userCertificates/{id}/status  - activate/deactivate a certificate
+#
+# This was reverse-engineered from the browser's Network tab while using the
+# real GUI upload/activate/delete flow -- it is undocumented but is the same
+# code path the UI uses, so it's far more robust than editing settings.yaml,
+# http/local-certs.conf, or the underlying Postgres user_certificates table
+# directly (all of which are also touched by this API, but only as a result
+# of the app's own internal logic, which handles cert parsing, active-cert
+# bookkeeping, and nginx config regeneration correctly on its own).
+#
+# Auth: POST /api/auth/login returns a `TOKEN` cookie containing a JWT whose
+# payload has a `csrfToken` claim. That value must be echoed back as the
+# `x-csrf-token` header on every subsequent state-changing request (a classic
+# double-submit CSRF pattern). No other cookies were found to be necessary.
+#
+# Uses core acme.sh helpers throughout (_post/_get, _json_encode,
+# _durl_replace_base64, _dbase64, _egrep_o) rather than raw curl -k or
+# python3, so the wget fallback, --debug tracing, and CA_BUNDLE are all
+# honored the same as every other hook. The management API's cert may be
+# self-signed -- it always is on a fresh install, and there is no reliable
+# way to tell in advance whether an earlier run has already replaced it --
+# so this hook sets HTTPS_INSECURE=1 itself, scoped to its own subshell (see
+# acme.sh's per-hook sourcing in _deploy) -- it does not weaken TLS
+# verification for the rest of the acme.sh run, e.g. the connection to the
+# ACME CA.
+#
+# Design: This hook does not save a certificate ID between renewals. Each
+# upload gets a name unique to that run: the domain name plus a timestamp.
+# This name never collides with an entry from a previous deploy. This is
+# true even if that entry is still active. The hook uploads and activates
+# the new certificate before it removes any old entries. If a failure
+# occurs during this process, the server still has a valid, active
+# certificate. The hook removes old entries only after activation is
+# complete. It removes only entries whose name starts with the domain name,
+# because this is the hook's own naming convention. As a result, this step
+# can only affect entries that this hook created for this domain. It can
+# never affect a certificate that a user uploaded manually, and it can
+# never affect a self-signed certificate.
+#
+# Settings:
+#   DEPLOY_UNIFIOS_HOST - base URL of the management API
+#     (default: "https://localhost:11443", i.e. a UniFi OS Server on the
+#     same machine as acme.sh; set it to "https://<host>" for UniFi OS
+#     hardware or any remote target)
+#   DEPLOY_UNIFIOS_USERNAME - UniFi OS admin username (required)
+#   DEPLOY_UNIFIOS_PASSWORD - UniFi OS admin password (required)
+#
+# Example:
+#   export DEPLOY_UNIFIOS_USERNAME="acmeuser"
+#   export DEPLOY_UNIFIOS_PASSWORD="xxxxx"
+#   acme.sh --deploy -d example.com --deploy-hook unifios
+#
+# Please report bugs to https://github.com/acmesh-official/acme.sh/issues/7182
+
+_uos_response_code() {
+  # tr strips the trailing newline along with form feeds; re-terminate
+  # before the second _egrep_o, whose sed fallback (used wherever egrep -o
+  # is unavailable) drops an unterminated final line on some platforms.
+  _uos_code="$(_egrep_o <"$HTTP_HEADER" "^HTTP[^ ]* .*$" | cut -d " " -f 2-100 | tr -d "\f\n")"
+  printf '%s\n' "$_uos_code" | _egrep_o "^[0-9][0-9]*"
+}
+
+_uos_response_cookie() {
+  # $1 = cookie name
+  grep <"$HTTP_HEADER" -i "^Set-Cookie: *$1=" | _tail_n 1 | _egrep_o "$1=[^;]*" | _head_n 1
+}
+
+_uos_split_json() {
+  # $1 = raw JSON list response
+  #
+  # _normalizeJson collapses the response to one line. This removes extra
+  # space around colons. It also removes any CR or LF characters that the
+  # server can add. However, _normalizeJson also removes the newline
+  # character at the end of the line. If the line has no ending newline
+  # character, some sed programs drop the last line of input. This code
+  # adds the newline back before the split below, to prevent that problem.
+  _uos_normalized="$(echo "$1" | _normalizeJson)"
+  # A literal newline character splits the JSON into one object per line.
+  # Grep can then match a single certificate entry at a time. This is not
+  # the two-character "\n" sequence: GNU sed reads "\n" in the replacement
+  # text as a newline character. POSIX does not define this behavior, and
+  # BSD sed prints "\n" as two literal characters, not as a newline.
+  printf '%s\n' "$_uos_normalized" | sed 's/},{/},\
+{/g'
+}
+
+_uos_grep_literal() {
+  # $1 = literal text to find, matched without a regex -- portable to
+  # grep implementations with no -F flag (e.g. Solaris), and avoids "*"
+  # or "." in a domain name being read as a regex metacharacter.
+  while IFS= read -r _uos_line || [ -n "$_uos_line" ]; do
+    case "$_uos_line" in
+    *"$1"*) printf '%s\n' "$_uos_line" ;;
+    esac
+  done
+}
+
+unifios_deploy() {
+  _cdomain="$1"
+  _ckey="$2"
+  _ccert="$3"
+  _cca="$4"
+  _cfullchain="$5"
+
+  _debug _cdomain "$_cdomain"
+  _debug _ckey "$_ckey"
+  _debug _ccert "$_ccert"
+  _debug _cca "$_cca"
+  _debug _cfullchain "$_cfullchain"
+
+  # Scoped to this hook's own subshell -- does not affect the rest of the
+  # acme.sh run (e.g. the connection to the ACME CA).
+  export HTTPS_INSECURE=1
+
+  _getdeployconf DEPLOY_UNIFIOS_HOST
+  DEPLOY_UNIFIOS_HOST="${DEPLOY_UNIFIOS_HOST:-https://localhost:11443}"
+  _savedeployconf DEPLOY_UNIFIOS_HOST "$DEPLOY_UNIFIOS_HOST"
+  _debug DEPLOY_UNIFIOS_HOST "$DEPLOY_UNIFIOS_HOST"
+
+  _getdeployconf DEPLOY_UNIFIOS_USERNAME
+  _getdeployconf DEPLOY_UNIFIOS_PASSWORD
+
+  if [ -z "$DEPLOY_UNIFIOS_USERNAME" ] || [ -z "$DEPLOY_UNIFIOS_PASSWORD" ]; then
+    _err "DEPLOY_UNIFIOS_USERNAME and DEPLOY_UNIFIOS_PASSWORD must be set."
+    return 1
+  fi
+  _debug DEPLOY_UNIFIOS_USERNAME "$DEPLOY_UNIFIOS_USERNAME"
+  _secure_debug DEPLOY_UNIFIOS_PASSWORD "$DEPLOY_UNIFIOS_PASSWORD"
+
+  _info "Logging in to UniFi OS Server API at $DEPLOY_UNIFIOS_HOST..."
+
+  # _json_encode always appends a trailing "\n" escape, even to input with
+  # no trailing newline (it normalizes via `echo`, unconditionally adding
+  # one). That's harmless for the key/cert file content below, which
+  # legitimately ends in a real newline anyway, but wrong for these plain
+  # strings -- strip the spurious escape it leaves behind.
+  _uos_user_json="$(printf '%s' "$DEPLOY_UNIFIOS_USERNAME" | _json_encode)"
+  _uos_user_json="${_uos_user_json%\\n}"
+  _uos_pass_json="$(printf '%s' "$DEPLOY_UNIFIOS_PASSWORD" | _json_encode)"
+  _uos_pass_json="${_uos_pass_json%\\n}"
+  _login_body="{\"username\":\"$_uos_user_json\",\"password\":\"$_uos_pass_json\",\"token\":\"\",\"rememberMe\":false}"
+
+  _login_json="$(_post "$_login_body" "$DEPLOY_UNIFIOS_HOST/api/auth/login" "" "POST" "application/json")"
+  _login_code="$(_uos_response_code)"
+
+  if [ "$_login_code" != "200" ]; then
+    _err "Login failed (HTTP $_login_code)."
+    _err "Response: $_login_json"
+    return 1
+  fi
+
+  # Credentials are proven correct now -- save them, rather than only at the
+  # very end, so a later step failing doesn't discard a working login.
+  # base64-encoded: _save_conf wraps values in single quotes with no
+  # escaping, so a literal "'" in the password would otherwise corrupt the
+  # domain conf (see deploy/synology_dsm.sh for the same pattern).
+  _savedeployconf DEPLOY_UNIFIOS_USERNAME "$DEPLOY_UNIFIOS_USERNAME" "base64"
+  _savedeployconf DEPLOY_UNIFIOS_PASSWORD "$DEPLOY_UNIFIOS_PASSWORD" "base64"
+
+  _uos_token="$(_uos_response_cookie TOKEN)"
+  if [ -z "$_uos_token" ]; then
+    _err "Login succeeded but no TOKEN cookie was returned."
+    return 1
+  fi
+
+  _H1="Cookie: $_uos_token"
+  export _H1
+
+  _uos_jwt_payload="$(echo "$_uos_token" | cut -d '=' -f 2- | cut -d '.' -f 2)"
+  _uos_csrf="$(_durl_replace_base64 "$_uos_jwt_payload" | _dbase64 | _egrep_o '"csrfToken":"[^"]*"' | cut -d '"' -f 4)"
+  if [ -z "$_uos_csrf" ]; then
+    _err "Could not extract csrfToken from session token."
+    return 1
+  fi
+
+  _H2="x-csrf-token: $_uos_csrf"
+  export _H2
+
+  _info "Uploading new certificate..."
+  # "name" is a purely cosmetic label -- the server never validates it
+  # against the certificate's actual CN/SAN, and accepts arbitrary text
+  # including spaces (confirmed: a cert for example.com served correctly
+  # after being uploaded under the unrelated name "totally unrelated label").
+  # The only constraint that matters here is uniqueness: the server rejects
+  # a second entry with a name it already has, so a bare domain name would
+  # collide with the previous deploy's entry on every renewal after the
+  # first. A full human-readable timestamp would make that obvious in the
+  # UI, but the certificate list's name column is fixed-width and doesn't
+  # wrap (confirmed against the real UI: a long name overlaps the Expires
+  # column and makes both unreadable), so keep the suffix short instead --
+  # Unix epoch seconds are still unique enough for this purpose.
+  #
+  # This name includes the key type (rsa or ecdsa), to keep an RSA
+  # deploy and an ECC deploy of the same domain from sharing this
+  # prefix. Without the key type, the cleanup step for each deploy
+  # removes the entry that the other deploy creates. `deploy/haproxy.sh`
+  # and `deploy/lighttpd.sh` use the same `_isEccKey` check, for the same
+  # reason.
+  # shellcheck disable=SC2154 # Le_Keylength is set by acme.sh core, not this hook
+  if _isEccKey "${Le_Keylength}"; then
+    _uos_keytype="ecdsa"
+  else
+    _uos_keytype="rsa"
+  fi
+  _uos_name="$_cdomain $_uos_keytype $(_time)"
+  _uos_key_json="$(_json_encode <"$_ckey")"
+  _uos_cert_json="$(_json_encode <"$_cfullchain")"
+  _create_body="{\"name\":\"$_uos_name\",\"key\":\"$_uos_key_json\",\"cert\":\"$_uos_cert_json\"}"
+
+  _create_json="$(_post "$_create_body" "$DEPLOY_UNIFIOS_HOST/api/userCertificates" "" "POST" "application/json")"
+  _create_code="$(_uos_response_code)"
+
+  if [ "$_create_code" = "201" ]; then
+    _new_id="$(echo "$_create_json" | _egrep_o '"id":"[^"]*"' | _head_n 1 | cut -d '"' -f 4)"
+    if [ -z "$_new_id" ]; then
+      _err "Could not determine new certificate ID from upload response."
+      return 1
+    fi
+  elif [ "$_create_code" = "400" ] && echo "$_create_json" | grep -q "USER_CERTIFICATE_DUPLICATE"; then
+    # HTTP 400 alone just means "bad request" -- it's the USER_CERTIFICATE_DUPLICATE
+    # code in the response body, checked above, that actually confirms this.
+    # The name above is unique to this run, so a duplicate here can only be
+    # the server's other uniqueness constraint: this exact certificate (by
+    # fingerprint) already exists as some other entry -- most likely a retry
+    # after a prior run already uploaded it (a real renewal always produces a
+    # new fingerprint, so this shouldn't happen in normal cron use). The
+    # response body doesn't include the existing entry's id, so look it up
+    # by fingerprint instead.
+    # The API's own fingerprint field is SHA-1 (20 bytes), not SHA-256 --
+    # confirmed against a real response, e.g.
+    # "fingerprint":"FC:02:50:9C:3B:3F:B7:79:9D:CA:4D:7C:AC:92:E7:D5:EA:F1:3A:29"
+    # (20 colon-separated groups). _fingerprint (core helper) strips the
+    # colons that field has, so re-insert them rather than stripping the
+    # JSON's own colons, which would also remove the ones separating every
+    # key from its value.
+    _uos_fingerprint="$(_fingerprint "$_cfullchain" sha1)"
+    if [ -z "$_uos_fingerprint" ]; then
+      _err "Could not compute the certificate's fingerprint."
+      return 1
+    fi
+    _uos_fingerprint="$(echo "$_uos_fingerprint" | sed 's/\(..\)/\1:/g; s/:$//')"
+
+    _list_json="$(_get "$DEPLOY_UNIFIOS_HOST/api/userCertificates")"
+    _list_code="$(_uos_response_code)"
+    if [ "$_list_code" != "200" ]; then
+      _err "Failed to list existing certificates (HTTP $_list_code)."
+      _err "Response: $_list_json"
+      return 1
+    fi
+    _list_json="$(_uos_split_json "$_list_json")"
+    _new_id="$(echo "$_list_json" | _uos_grep_literal "\"fingerprint\":\"$_uos_fingerprint\"" | _egrep_o '"id":"[^"]*"' | _head_n 1 | cut -d '"' -f 4)"
+    if [ -z "$_new_id" ]; then
+      _err "Certificate upload rejected as a duplicate (server reported USER_CERTIFICATE_DUPLICATE), but no existing entry matching this fingerprint was found."
+      _err "Response: $_create_json"
+      return 1
+    fi
+    # Reusing the existing entry rather than deleting it and re-uploading
+    # under today's name+timestamp: the served content is identical either
+    # way, so replacing it would only cost an extra delete+create round trip
+    # for no functional benefit. The tradeoff is cosmetic -- this entry keeps
+    # whatever name it was given whenever it was originally uploaded, so it
+    # won't reflect today's date in the UI.
+    _info "Certificate already present as entry $_new_id; reusing it."
+  else
+    _err "Certificate upload failed (HTTP $_create_code)."
+    _err "Response: $_create_json"
+    return 1
+  fi
+
+  _info "Activating certificate $_new_id..."
+  _activate_json="$(_post '{"active":true}' "$DEPLOY_UNIFIOS_HOST/api/userCertificates/$_new_id/status" "" "PUT" "application/json")"
+  _activate_code="$(_uos_response_code)"
+
+  if [ "$_activate_code" != "200" ]; then
+    _err "Failed to activate new certificate (HTTP $_activate_code)."
+    _err "Response: $_activate_json"
+    return 1
+  fi
+
+  # UniFi OS Server activation is exclusive server-wide. Tests against the
+  # real API confirm this: activation of one entry deactivates whichever
+  # other entry was active before, no matter its name or domain. As a
+  # result, the server serves the certificate that this hook just activated.
+  # This certificate is already live. If the removal of old entries below
+  # fails, the hook logs the failure. The deploy does not fail because of
+  # this.
+  _info "Checking for old certificate entries to remove..."
+  _list_json="$(_get "$DEPLOY_UNIFIOS_HOST/api/userCertificates")"
+  _list_code="$(_uos_response_code)"
+  if [ "$_list_code" != "200" ]; then
+    _err "Failed to list certificates for cleanup (HTTP $_list_code) -- leaving old entries in place."
+  else
+    _list_json="$(_uos_split_json "$_list_json")"
+    # The pattern below matches the domain name and key type, followed by
+    # a space. If the space is missing, the pattern can also match a
+    # different domain that starts with the same text as this domain.
+    _old_ids="$(echo "$_list_json" | _uos_grep_literal "\"name\":\"$_cdomain $_uos_keytype " | _egrep_o '"id":"[^"]*"' | cut -d '"' -f 4 | grep -v "^$_new_id$")"
+    for _old_id in $_old_ids; do
+      _info "Removing old certificate entry $_old_id..."
+      _del_json="$(_post "" "$DEPLOY_UNIFIOS_HOST/api/userCertificates/$_old_id" "" "DELETE")"
+      _del_code="$(_uos_response_code)"
+      if [ "$_del_code" != "204" ] && [ "$_del_code" != "200" ]; then
+        _err "Failed to delete old certificate $_old_id (HTTP $_del_code) -- leaving it in place."
+        _err "Response: $_del_json"
+      fi
+    done
+  fi
+
+  _info "UniFi OS Server certificate deployed and activated successfully."
+  return 0
+}

deploy/windows_rdp.sh

@@ -0,0 +1,158 @@
+#!/usr/bin/env sh
+
+# install a certificate on a Windows host over OpenSSH and bind it to the Remote
+# Desktop listener (RDP-Tcp).
+#
+# One ssh invocation does the whole job:
+#   * the PFX is built locally, base64'd, and embedded as a string literal
+#     inside a generated PowerShell script;
+#   * the script is piped to `powershell.exe -Command -` over ssh. No scp,
+#     no temp files on the Windows host.
+#
+# First run:
+#   export DEPLOY_WIN_RDP_HOST=winserver.example.com
+#   acme.sh --deploy -d winserver.example.com --deploy-hook windows_rdp
+#
+# Available variables:
+#   DEPLOY_WIN_RDP_HOST        required   SSH host
+#   DEPLOY_WIN_RDP_USER        optional   SSH user, must be a local administrator (can also by set via ssh_config)
+#   DEPLOY_WIN_RDP_PORT        optional   SSH port, default 22
+#   DEPLOY_WIN_RDP_SSH_OPTS    optional   extra ssh options, e.g.
+#   									  "-i /root/.ssh/win_id_ed25519 -o StrictHostKeyChecking=yes"
+#   DEPLOY_WIN_RDP_LISTENER    optional   RDP listener name, default RDP-Tcp
+#   DEPLOY_WIN_RDP_RESTART     optional   "1" to restart TermService after install.
+#   									  Active RDP sessions will drop!
+
+windows_rdp_deploy() {
+  _cdomain="$1"
+  _ckey="$2"
+  _ccert="$3"
+  _cca="$4"
+  _cfullchain="$5"
+
+  _debug _cdomain "$_cdomain"
+  _debug _ckey "$_ckey"
+  _debug _ccert "$_ccert"
+  _debug _cca "$_cca"
+  _debug _cfullchain "$_cfullchain"
+
+  if ! _exists "ssh"; then
+    _err "ssh is required but was not found in PATH."
+    return 1
+  fi
+
+  # ---- configuration ------------------------------------------------------
+  _getdeployconf DEPLOY_WIN_RDP_HOST
+  _getdeployconf DEPLOY_WIN_RDP_USER
+  _getdeployconf DEPLOY_WIN_RDP_PORT
+  _getdeployconf DEPLOY_WIN_RDP_SSH_OPTS
+  _getdeployconf DEPLOY_WIN_RDP_LISTENER
+  _getdeployconf DEPLOY_WIN_RDP_RESTART
+
+  if [ -z "$DEPLOY_WIN_RDP_HOST" ]; then
+    _err "DEPLOY_WIN_RDP_HOST must be set."
+    return 1
+  fi
+
+  _savedeployconf DEPLOY_WIN_RDP_HOST "$DEPLOY_WIN_RDP_HOST"
+  [ -n "$DEPLOY_WIN_RDP_USER" ] && _savedeployconf DEPLOY_WIN_RDP_USER "$DEPLOY_WIN_RDP_USER"
+  [ -n "$DEPLOY_WIN_RDP_PORT" ] && _savedeployconf DEPLOY_WIN_RDP_PORT "$DEPLOY_WIN_RDP_PORT"
+  [ -n "$DEPLOY_WIN_RDP_SSH_OPTS" ] && _savedeployconf DEPLOY_WIN_RDP_SSH_OPTS "$DEPLOY_WIN_RDP_SSH_OPTS"
+  [ -n "$DEPLOY_WIN_RDP_LISTENER" ] && _savedeployconf DEPLOY_WIN_RDP_LISTENER "$DEPLOY_WIN_RDP_LISTENER"
+  [ -n "$DEPLOY_WIN_RDP_RESTART" ] && _savedeployconf DEPLOY_WIN_RDP_RESTART "$DEPLOY_WIN_RDP_RESTART"
+
+  _port="${DEPLOY_WIN_RDP_PORT:-22}"
+  _listener="${DEPLOY_WIN_RDP_LISTENER:-RDP-Tcp}"
+  if [ -n "$DEPLOY_WIN_RDP_USER" ]; then
+    _target="$DEPLOY_WIN_RDP_USER@$DEPLOY_WIN_RDP_HOST"
+  else
+    _target="$DEPLOY_WIN_RDP_HOST"
+  fi
+  _pfx_pass="acme"
+
+  # ---- build thumbprint + PFX locally ------------------------------------
+  _thumb="$(_fingerprint "$_ccert" 'sha1')"
+  if [ -z "$_thumb" ]; then
+    _err "Failed to compute certificate thumbprint."
+    return 1
+  fi
+  _debug "Thumbprint: $_thumb"
+
+  _debug "Building PFX at $_pfx_file"
+  _pfx_file="$(_mktemp)"
+  if ! _toPkcs "$_pfx_file" "$_ckey" "$_ccert" "$_cca" "$_pfx_pass"; then
+    _err "Failed to build PFX archive."
+    rm -f "$_pfx_file"
+    return 1
+  fi
+  _pfx_b64=$(_base64 "multiline" <"$_pfx_file")
+  rm -f "$_pfx_file"
+
+  # ---- build installer script --------------------------------------------
+  if [ "$DEPLOY_WIN_RDP_RESTART" = "1" ]; then
+    _restart_ps='Restart-Service -Name TermService -Force'
+  else
+    _restart_ps='# New RdP connections will pick up the new cert automatically.'
+  fi
+
+  # Escape every literal `$` with `\$` so the shell does not expand it.
+  # Values substituted from shell: $_pfx_b64, $_pfx_pass, $_thumb, $_listener.
+  _ps1=$(
+    cat <<PSEOF
+
+\$ErrorActionPreference = 'Stop'
+
+\$pfxBytes = [Convert]::FromBase64String('${_pfx_b64}')
+
+# Note: It is quite important to use a X509Certificate2Collection here in any case, since we otherwise
+# could run into quite a lot of trouble when importing the certificate including its entire chain
+# and its private key. Windows might behave arbitrarily and not consistently import the certificate
+# at all - unless "Exportable" is included in the storage flags. However, then the certificate seems
+# unaccessible to TermService for some weird reasons despite all permissions being set (at least on my
+# Win 11 lab machine). This might be some security setting that prevents TermService from working with
+# exportable keys? I don't know - importing the entire collection including chain or not always fixes
+# the issues.
+#
+# Note2: If you should have kicked yourself out for some reason, then deleting the certificate will make
+# TermService restore the original, self-signed certificate after at least after the second login attempt.
+# Deleting the certificate can be easily accomplished via the Powershell, since SSH access will still be
+# present in any case - the following command should get you out of trouble:
+# \$cert = Get-ChildItem -Path 'Cert:\LocalMachine\My\\${_thumb}' | Select-Object -First 1 | Remove-Item
+
+\$flags    = [System.Security.Cryptography.X509Certificates.X509KeyStorageFlags]'MachineKeySet,PersistKeySet'
+\$certs    = New-Object System.Security.Cryptography.X509Certificates.X509Certificate2Collection
+\$certs.Import(\$pfxBytes, '${_pfx_pass}', \$flags)
+
+\$store = [System.Security.Cryptography.X509Certificates.X509Store]::new('My', 'LocalMachine')
+\$store.Open('ReadWrite')
+\$store.AddRange(\$certs)
+\$store.Close()
+Write-Host "Installed certs into LocalMachine\\My"
+
+\$ts = Get-CimInstance -Namespace root/cimv2/terminalservices -ClassName Win32_TSGeneralSetting -Filter "TerminalName='${_listener}'"
+if (-not \$ts) { throw "Listener '${_listener}' not found." }
+Set-CimInstance -InputObject \$ts -Property @{SSLCertificateSHA1Hash="${_thumb}"}
+Write-Host "Listener ${_listener} now uses ${_thumb}"
+
+${_restart_ps}
+PSEOF
+  )
+  _debug "Powershell script:${_ps1}"
+
+  # ---- run over a single ssh connection ----------------------------------
+  _ssh_opts="-o BatchMode=yes -p $_port"
+  if [ -n "$DEPLOY_WIN_RDP_SSH_OPTS" ]; then
+    _ssh_opts="$_ssh_opts $DEPLOY_WIN_RDP_SSH_OPTS"
+  fi
+
+  _info "Deploying to $DEPLOY_WIN_RDP_HOST ..."
+  # shellcheck disable=SC2086
+  if ! printf '%s\n' "$_ps1" | ssh $_ssh_opts "$_target" \
+    'powershell.exe -NoProfile -NonInteractive -ExecutionPolicy Bypass -Command -'; then
+    _err "Remote install failed. Re-run acme.sh with --debug to see the PowerShell output."
+    return 1
+  fi
+
+  _info "Certificate for $_cdomain deployed and bound to $_listener on $DEPLOY_WIN_RDP_HOST."
+  return 0
+}

dnsapi/dns_1984hosting.sh

@@ -7,6 +7,7 @@ Docs: github.com/acmesh-official/acme.sh/wiki/dnsapi2#dns_1984hosting
 Options:
  One984HOSTING_Username Username
  One984HOSTING_Password Password
+ One984HOSTING_TOTP_Secret Base32 TOTP shared secret. Required only if the account has 2FA enabled. Requires oathtool. Used to mint the OTP code automatically at login so cron renewals keep working.
 Issues: github.com/acmesh-official/acme.sh/issues/2851
 Author: Adrian Fedoreanu
 '
@@ -124,11 +125,28 @@ _1984hosting_login() {
   _debug "Login to 1984Hosting as user $One984HOSTING_Username."
   username=$(printf '%s' "$One984HOSTING_Username" | _url_encode)
   password=$(printf '%s' "$One984HOSTING_Password" | _url_encode)
-  url="https://1984.hosting/api/auth/"
 
-  _get "https://1984.hosting/accounts/login/" | grep "csrfmiddlewaretoken"
-  csrftoken="$(grep -i '^set-cookie:' "$HTTP_HEADER" | _egrep_o 'csrftoken=[^;]*;' | tr -d ';')"
-  sessionid="$(grep -i '^set-cookie:' "$HTTP_HEADER" | _egrep_o 'cookie1984nammnamm=[^;]*;' | tr -d ';')"
+  # When 2FA is enabled, mint a fresh TOTP code from the stored shared secret.
+  # Empty otpkey is accepted by the server when 2FA is off.
+  otpkey=""
+  if [ -n "$One984HOSTING_TOTP_Secret" ]; then
+    if ! _exists oathtool; then
+      _err "oathtool is required to use One984HOSTING_TOTP_Secret for 2FA. Please install it."
+      return 1
+    fi
+    otpcode="$(oathtool --base32 --totp "$One984HOSTING_TOTP_Secret" 2>/dev/null)"
+    if [ -z "$otpcode" ]; then
+      _err "Failed to generate TOTP code from One984HOSTING_TOTP_Secret."
+      return 1
+    fi
+    otpkey="$(printf '%s' "$otpcode" | _url_encode)"
+  fi
+
+  # Fetch the login page to obtain CSRF and session cookies.
+  # Note: _get sets the global 'url', so assign the auth URL afterwards.
+  _get "https://1984.hosting/accounts/login/" >/dev/null
+  csrftoken="$(grep -i '^set-cookie:' "$HTTP_HEADER" | _egrep_o 'csrftoken=[^;]*;' | _head_n 1 | tr -d ';')"
+  sessionid="$(grep -i '^set-cookie:' "$HTTP_HEADER" | _egrep_o 'cookie1984nammnamm=[^;]*;' | _head_n 1 | tr -d ';')"
 
   if [ -z "$csrftoken" ] || [ -z "$sessionid" ]; then
     _err "One or more cookies are empty: '$csrftoken', '$sessionid'."
@@ -140,17 +158,23 @@ _1984hosting_login() {
   csrf_header=$(echo "$csrftoken" | sed 's/csrftoken=//' | _head_n 1)
   export _H3="X-CSRFToken: $csrf_header"
 
-  response="$(_post "username=$username&password=$password&otpkey=" $url)"
+  url="https://1984.hosting/api/auth/"
+  response="$(_post "username=$username&password=$password&otpkey=$otpkey" "$url")"
   response="$(echo "$response" | _normalizeJson)"
   _debug2 response "$response"
 
   if _contains "$response" '"loggedin": true'; then
-    One984HOSTING_SESSIONID_COOKIE="$(grep -i '^set-cookie:' "$HTTP_HEADER" | _egrep_o 'cookie1984nammnamm=[^;]*;' | tr -d ';')"
-    One984HOSTING_CSRFTOKEN_COOKIE="$(grep -i '^set-cookie:' "$HTTP_HEADER" | _egrep_o 'csrftoken=[^;]*;' | tr -d ';')"
+    One984HOSTING_SESSIONID_COOKIE="$(grep -i '^set-cookie:' "$HTTP_HEADER" | _egrep_o 'cookie1984nammnamm=[^;]*;' | _head_n 1 | tr -d ';')"
+    One984HOSTING_CSRFTOKEN_COOKIE="$(grep -i '^set-cookie:' "$HTTP_HEADER" | _egrep_o 'csrftoken=[^;]*;' | _head_n 1 | tr -d ';')"
     export One984HOSTING_SESSIONID_COOKIE
     export One984HOSTING_CSRFTOKEN_COOKIE
     _saveaccountconf_mutable One984HOSTING_Username "$One984HOSTING_Username"
     _saveaccountconf_mutable One984HOSTING_Password "$One984HOSTING_Password"
+    if [ -n "$One984HOSTING_TOTP_Secret" ]; then
+      _saveaccountconf_mutable One984HOSTING_TOTP_Secret "$One984HOSTING_TOTP_Secret"
+    else
+      _clearaccountconf_mutable One984HOSTING_TOTP_Secret
+    fi
     _saveaccountconf_mutable One984HOSTING_SESSIONID_COOKIE "$One984HOSTING_SESSIONID_COOKIE"
     _saveaccountconf_mutable One984HOSTING_CSRFTOKEN_COOKIE "$One984HOSTING_CSRFTOKEN_COOKIE"
     return 0
@@ -161,6 +185,7 @@ _1984hosting_login() {
 _check_credentials() {
   One984HOSTING_Username="${One984HOSTING_Username:-$(_readaccountconf_mutable One984HOSTING_Username)}"
   One984HOSTING_Password="${One984HOSTING_Password:-$(_readaccountconf_mutable One984HOSTING_Password)}"
+  One984HOSTING_TOTP_Secret="${One984HOSTING_TOTP_Secret:-$(_readaccountconf_mutable One984HOSTING_TOTP_Secret)}"
   if [ -z "$One984HOSTING_Username" ] || [ -z "$One984HOSTING_Password" ]; then
     One984HOSTING_Username=""
     One984HOSTING_Password=""
@@ -225,9 +250,15 @@ _get_root() {
 
 # Usage: _get_zone_id url domain.com
 # Returns zone id for domain.com
+# Memoized per-domain so add/rm don't re-fetch the same zone list within a run.
+# Keyed on domain (not url) since the url is always the domains listing.
 _get_zone_id() {
   url=$1
   domain=$2
+  if [ "$_zone_id_for" = "$domain" ] && [ -n "$_zone_id" ]; then
+    _debug2 _zone_id "$_zone_id (cached)"
+    return 0
+  fi
   _htmlget "$url" "$domain"
   _zone_id="$(echo "$_response" | _egrep_o 'zone\/[0-9]+' | _head_n 1)"
   _debug2 _zone_id "$_zone_id"
@@ -235,6 +266,7 @@ _get_zone_id() {
     _err "Error getting _zone_id for $2."
     return 1
   fi
+  _zone_id_for="$domain"
   return 0
 }
 
@@ -257,9 +289,8 @@ _htmlget() {
 
 # Add extra headers to request
 _authpost() {
-  url="https://1984.hosting/domains"
-  _get_zone_id "$url" "$_domain"
-  csrf_header="$(echo "$One984HOSTING_CSRFTOKEN_COOKIE" | _egrep_o "=[^=][0-9a-zA-Z]*" | tr -d "=")"
+  _get_zone_id "https://1984.hosting/domains" "$_domain"
+  csrf_header="$(echo "$One984HOSTING_CSRFTOKEN_COOKIE" | sed 's/csrftoken=//' | _head_n 1)"
   export _H1="Cookie: $One984HOSTING_CSRFTOKEN_COOKIE; $One984HOSTING_SESSIONID_COOKIE"
   export _H2="Referer: https://1984.hosting/domains/$_zone_id"
   export _H3="X-CSRFToken: $csrf_header"

dnsapi/dns_acmedns.sh

@@ -37,6 +37,16 @@ dns_acmedns_add() {
   ACMEDNS_PASSWORD="${ACMEDNS_PASSWORD:-$(_readdomainconf ACMEDNS_PASSWORD)}"
   ACMEDNS_SUBDOMAIN="${ACMEDNS_SUBDOMAIN:-$(_readdomainconf ACMEDNS_SUBDOMAIN)}"
 
+  #for compatibility: old versions stored ACMEDNS_UPDATE_URL in the account
+  #conf (issue 3899). Do not clear it here: it must stay available for the
+  #other domains that have not migrated to their domain conf yet.
+  if [ -z "$ACMEDNS_BASE_URL" ]; then
+    _acmedns_update_url="$(_readaccountconf_mutable ACMEDNS_UPDATE_URL)"
+    if [ "$_acmedns_update_url" ]; then
+      ACMEDNS_BASE_URL="$(echo "$_acmedns_update_url" | sed 's#/update$##')"
+    fi
+  fi
+
   if [ "$ACMEDNS_BASE_URL" = "" ]; then
     ACMEDNS_BASE_URL="https://auth.acme-dns.io"
   fi
@@ -71,7 +81,7 @@ dns_acmedns_add() {
   data="{\"subdomain\":\"$ACMEDNS_SUBDOMAIN\", \"txt\": \"$txtvalue\"}"
 
   _debug data "$data"
-  response="$(_post "$data" "$ACMEDNS_UPDATE_URL" "" "POST")"
+  response="$(_post "$data" "$ACMEDNS_UPDATE_URL" "" "POST" "application/json")"
   _debug response "$response"
 
   if ! echo "$response" | grep "\"$txtvalue\"" >/dev/null; then

dnsapi/dns_ali.sh

@@ -18,7 +18,9 @@ Ali_DNS_API="https://alidns.aliyuncs.com/"
 
 #Usage: dns_ali_add   _acme-challenge.www.domain.com   "XKrxpRBosdIKFzxW_CT3KLZNf6q0HG9i01zxXp5CPBs"
 dns_ali_add() {
-  fulldomain=$1
+  # the API only accepts punycode for IDN domains, and a raw UTF-8 domain
+  # also breaks the request signature (issue 4733)
+  fulldomain=$(_idn "$1")
   txtvalue=$2
 
   _prepare_ali_credentials || return 1
@@ -33,7 +35,7 @@ dns_ali_add() {
 }
 
 dns_ali_rm() {
-  fulldomain=$1
+  fulldomain=$(_idn "$1")
   txtvalue=$2
   Ali_Key="${Ali_Key:-$(_readaccountconf_mutable Ali_Key)}"
   Ali_Secret="${Ali_Secret:-$(_readaccountconf_mutable Ali_Secret)}"
@@ -69,8 +71,8 @@ _ali_rest() {
   ign="$2"
   mtd="${3:-GET}"
 
-  signature=$(printf "%s" "$mtd&%2F&$(printf "%s" "$query" | _url_encode upper-hex)" | _hmac "sha1" "$(printf "%s" "$Ali_Secret&" | _hex_dump | tr -d " ")" | _base64)
-  signature=$(printf "%s" "$signature" | _url_encode upper-hex)
+  signature=$(printf "%s" "$mtd&%2F&$(printf "%s" "$query" | _ali_urlencode_upper)" | _hmac "sha1" "$(printf "%s" "$Ali_Secret&" | _hex_dump | tr -d " ")" | _base64)
+  signature=$(printf "%s" "$signature" | _ali_urlencode_upper)
   url="$endpoint?Signature=$signature"
 
   if [ "$mtd" = "GET" ]; then
@@ -96,6 +98,20 @@ _ali_rest() {
   fi
 }
 
+# stdin stdout
+# The Aliyun signature requires percent-encoding with upper-case hex.
+# Do not use "_url_encode upper-hex" here: this file is also bundled by
+# third parties (e.g. Proxmox VE proxmox-acme) whose older copies of the
+# acme.sh function library ignore the upper-hex argument and output
+# lower-case hex, which invalidates the signature.
+# https://github.com/acmesh-official/acme.sh/issues/6272
+_ali_urlencode_upper() {
+  {
+    _url_encode
+    echo
+  } | sed 's/%a/%A/g;s/%b/%B/g;s/%c/%C/g;s/%d/%D/g;s/%e/%E/g;s/%f/%F/g;s/%\(.\)a/%\1A/g;s/%\(.\)b/%\1B/g;s/%\(.\)c/%\1C/g;s/%\(.\)d/%\1D/g;s/%\(.\)e/%\1E/g;s/%\(.\)f/%\1F/g'
+}
+
 _ali_nonce() {
   if [ "$ACME_OPENSSL_BIN" ]; then
     "$ACME_OPENSSL_BIN" rand -hex 16 2>/dev/null && return 0

dnsapi/dns_arubabusiness.sh

@@ -0,0 +1,490 @@
+#!/usr/bin/env sh
+
+# shellcheck disable=SC2034
+dns_arubabusiness_info='ArubaBusiness
+Site: business.aruba.it
+Docs: github.com/acmesh-official/acme.sh/wiki/dnsapi#dns_arubabusiness
+Options:
+ AB_Key Your ArubaBusiness API Key
+ AB_User Your account user
+ AB_Pass Your account password
+'
+
+#
+# A word of warning: as of this writing, api.arubabusiness.it only supports oauth authentication using the "password" grant type.
+# If you are REALLY sure you want to use it, it would be wise set up a dedicated technical user without administrative privileges
+#
+
+ARUBABUSINESS_API='https://api.arubabusiness.it'
+
+######## Public functions ########
+
+#
+# Usage: dns_arubabusiness_add _acme-challenge.www.domain.com aaaabbbbcccc111122223333
+#
+# Add a new TXT record whose name and value match the given domain and value
+#
+# Variables
+#   _full_domain: $1 - the name of the TXT record
+#   _txt_value: $2 - the value of the TXT record
+#   _body
+#   dns_details
+#   domain_id
+#   dns_record_id
+#   response
+#
+dns_arubabusiness_add() {
+  _full_domain=$1
+  _txt_value=$2
+
+  if ! _ab_authenticate; then
+    return 1
+  fi
+
+  if ! _ab_domain_id "$_full_domain"; then
+    return 1
+  fi
+
+  if _ab_dns_record_id "$_full_domain" "$_txt_value" "$dns_details"; then
+    # This is very unlikely, but allow the process to use the existing record
+    _info "A TXT record with name: $_full_domain and value: $_txt_value already exists (id: $dns_record_id)"
+    return 0
+  fi
+
+  _body="{ \"IdDomain\": $domain_id, \"Type\": \"TXT\", \"Name\": \"$_full_domain\", \"Content\": \"\\\"$_txt_value\\\"\" }"
+
+  _debug "Adding TXT record with name: $_full_domain and value: $_txt_value"
+
+  if ! _ab_rest POST "api/domains/dns/record" "$_body" || ! _contains "$response" "DomainId"; then
+    _err "Failed to add TXT record with name: $_full_domain"
+    return 1
+  fi
+
+  _info "Sleeping 10 seconds to let ArubaBusiness do its magic"
+  _sleep 10
+
+  # Refresh dns details and check that the record was really added
+  if ! _ab_dns_details "$root_domain"; then
+    return 1
+  fi
+
+  if ! _ab_dns_record_id "$_full_domain" "$_txt_value" "$dns_details"; then
+    # This should never happen
+    _err "The TXT record with name: $_full_domain was not set"
+    _err "Please check that the dns records are clean"
+    return 1
+  fi
+
+  _info "Added TXT record with id: $dns_record_id"
+  return 0
+}
+
+#
+# Usage: dns_arubabusiness_rm _acme-challenge.www.domain.com aaaabbbbcccc111122223333
+#
+# Remove the TXT record whose name and value match the given domain and value
+#
+# Variables
+#   _full_domain: $1 - the name of the TXT record
+#   _txt_value: $2 - the value of the TXT record
+#   dns_details
+#   dns_record_id
+#
+dns_arubabusiness_rm() {
+  _full_domain=$1
+  _txt_value=$2
+
+  if ! _ab_authenticate; then
+    return 1
+  fi
+
+  if ! _ab_domain_id "$_full_domain"; then
+    return 1
+  fi
+
+  if ! _ab_dns_record_id "$_full_domain" "$_txt_value" "$dns_details" || [ -z "$dns_record_id" ]; then
+    _err "Could not retrieve the record id for: $_full_domain"
+    return 1
+  fi
+
+  _debug "Deleting TXT record: $dns_record_id"
+  if ! _ab_rest DELETE "api/domains/dns/record/$dns_record_id" || ! _contains "$response" "DomainId"; then
+    _err "Failed to delete TXT record: $dns_record_id"
+    return 1
+  fi
+
+  _info "Deleted TXT record: $dns_record_id"
+  return 0
+}
+
+######## Private functions ########
+
+#
+# Usage: _ab_domain_id _acme-challenge.www.domain.com
+#
+# Split the input domain into subdomain + root domain and get the id of the root domain
+#
+# Variables
+#   _full_domain: $1 - the domain whose root needs to be extracted
+#   _domain_sections
+#   _current_index
+#   _candidate_subdomain
+#   _candidate_domain
+#   sub_domain
+#   root_domain
+#   domain_id
+#   dns_details: a json containing all dns records registered on the root domain
+#
+# Example
+#   _get_root _acme-challenge.www.domain.com
+#
+# Should return
+#   sub_domain=_acme-challenge.www
+#   root_domain=domain.com
+#   domain_id=123123123123
+#   dns_details="{JSON_CONTENT}"
+#
+_ab_domain_id() {
+  _full_domain=$1
+
+  _info "Attempting to retrieve root domain details for: $_full_domain"
+
+  _domain_sections=$(_math "$(printf "%s" "$_full_domain" | tr '.' '\n' | wc -l)" + 1)
+
+  if [ "$_domain_sections" -lt 1 ]; then
+    _err "Invalid input $_full_domain"
+    return 1
+  fi
+
+  _current_index=1
+  while true; do
+    _candidate_subdomain=$(if [ "$_current_index" = "1" ]; then printf ""; else printf "%s" "$_full_domain" | cut -d . -f 1-"$(_math "$_current_index" - 1)"; fi)
+    _candidate_domain=$(printf "%s" "$_full_domain" | cut -d . -f "$_current_index"-"$_domain_sections")
+
+    if ! _ab_dns_details "$_candidate_domain"; then
+      _debug2 "Could not fetch dns details for: $_candidate_domain"
+      _current_index=$(_math "$_current_index" + 1)
+
+      # Fail if there are no candidates left
+      if [ "$_current_index" -gt "$_domain_sections" ]; then
+        _err "Could not determine the root domain for: $_full_domain"
+        return 1
+      fi
+    else
+      sub_domain="$_candidate_subdomain"
+      root_domain="$_candidate_domain"
+      # Extract the domain id, which is an integer and contains no commas
+      domain_id="$(printf "%s" "$dns_details" | _egrep_o '"Id":[^,]*' | _head_n 1 | cut -d : -f 2 | tr -d ' "')"
+
+      if [ -z "$domain_id" ]; then
+        _err "Could not determine the domain id for: $root_domain"
+        return 1
+      fi
+
+      _debug "Retrieved root domain id: $domain_id"
+      return 0
+    fi
+  done
+}
+
+#
+# Usage: _ab_dns_record_id _acme-challenge.www.domain.com "aaaabbbbcccc111122223333" "{JSON_CONTENT}"
+#
+# Extract the record id of the first TXT record whose name and content match the input values
+#
+# Variables
+#   _record_name: $1
+#   _txt_value: $2
+#   _dns_details: $3 - the json returned by a previous call to '_ab_dns_details() $root_domain'
+#   _record_ids
+#   _record_names
+#   _record_types
+#   _record_contents
+#   _record_ids_count
+#   _record_names_count
+#   _record_types_count
+#   _record_contents_count
+#   _i
+#   dns_record_id
+#
+# Notes
+#   TXT correspond to record type 5
+#   ArubaBusiness appends a terminating dot (.) to the record name
+#   The content field may contain the following character sequence: \"
+#   All record names are always converted to lowercase
+#
+_ab_dns_record_id() {
+  _record_name=$1
+  _txt_value=$2
+  _dns_details=$3
+
+  _record_name_lowercase=$(printf "%s" "$_record_name" | _lower_case)
+
+  # Extract the record ids, which are integers and contain no commas, colons or spaces
+  # The first id is skipped because it refers to the domain id
+  _record_ids=$(printf "%s" "$_dns_details" | sed 's/"Id":/\n"Id":/g' | _egrep_o '"Id":[^,]*' | _tail_n +2 | cut -d : -f 2 | tr -d ' ' | tr '\n' ' ')
+
+  # Extract the record names, which are strings but cannot contain commas, colons, spaces and quotes
+  # The first name is skipped because it refers to the domain name
+  _record_names=$(printf "%s" "$_dns_details" | sed 's/"Name":/\n"Name":/g' | _egrep_o '"Name":[^,]*' | _tail_n +2 | cut -d : -f 2 | tr -d ' "' | tr '\n' ' ')
+
+  # Extract the record types, which  are integers (except for the first one) and contain no commas, colons or spaces
+  # The first type is skipped because it refers to the domain type
+  _record_types=$(printf "%s" "$_dns_details" | sed 's/"Type":/\n"Type":/g' | _egrep_o '"Type":[^,]*' | _tail_n +2 | cut -d : -f 2 | tr -d ' ' | tr '\n' ' ')
+
+  # Extract the record contents, which are strings and may contain no quotes except for TXT records, which must be delimited by two \" literals
+  # Note: There is no domain related entry here
+  # Note: A " character is appended at the end of each content to make it easier to process the list later
+  _record_contents=$(printf "%s" "$_dns_details" | sed 's/"Content":/\n"Content":/g' | sed 's/\\"//g' | _egrep_o '"Content": *"[^"]*"' | cut -d : -f 2- | sed -n 's/"\(.*\)"/\1/p' | tr '\n' '#')
+
+  _info "IDS: $_record_ids"
+  _info "NAMES: $_record_names"
+  _info "TYPEs: $_record_types"
+  _info "CONTENTS: $_record_contents"
+
+  _record_ids_count=$(printf "%s" "$_record_ids" | tr ' ' '\n' | wc -l)
+  _record_names_count=$(printf "%s" "$_record_names" | tr ' ' '\n' | wc -l)
+  _record_types_count=$(printf "%s" "$_record_types" | tr ' ' '\n' | wc -l)
+  _record_contents_count=$(printf "%s" "$_record_contents" | tr '#' '\n' | wc -l)
+
+  _info "Ids: $_record_ids_count, names: $_record_names_count, types: $_record_types_count, contents: $_record_contents_count"
+
+  if [ "$_record_ids_count" != "$_record_names_count" ] || [ "$_record_ids_count" != "$_record_types_count" ] || [ "$_record_ids_count" != "$_record_contents_count" ]; then
+    _err "Failed to parse record elements. Ids: $_record_ids_count, names: $_record_names_count, types: $_record_types_count, contents: $_record_contents_count"
+    return 1
+  fi
+
+  _info "Looking for a TXT record matching inputs - name: $_record_name_lowercase value: $_txt_value"
+
+  _i=1
+  while [ "$_i" -le "$_record_ids_count" ]; do
+    _current_name=$(printf "%s" "$_record_names" | cut -d " " -f "$_i")
+    _current_type=$(printf "%s" "$_record_types" | cut -d " " -f "$_i")
+    _current_content=$(printf "%s" "$_record_contents" | cut -d "#" -f "$_i")
+
+    if [ "$_record_name_lowercase." = "$_current_name" ] && [ "5" = "$_current_type" ] && [ "$_txt_value" = "$_current_content" ]; then
+      dns_record_id=$(printf "%s" "$_record_ids" | cut -d " " -f "$_i")
+      _info "Found matching record with id: $dns_record_id"
+      return 0
+    else
+      _debug2 "Record does not match - type: '$_current_type' name: '$_current_name' value: '$_current_content'; Expected '$_record_name_lowercase.' '5' '$_txt_value'"
+    fi
+    _i=$(_math "$_i" + 1)
+  done
+
+  _debug2 "No matching record was found in $_dns_details"
+  return 1
+}
+
+#
+# Usage: _ab_dns_details domain.com
+#
+# Retrieve dns info for the given input domain
+#
+# Variables
+#   _domain: $1
+#   dns_details: the json returned by the call to $ARUBABUSINESS_API/api/domains/dns/$_domain/details (if return status is 0)
+#   response
+#
+_ab_dns_details() {
+  _domain=$1
+
+  if ! _ab_rest GET "api/domains/dns/$_domain/details" || ! _contains "$response" "DomainId"; then
+    return 1
+  fi
+
+  dns_details="$response"
+  return 0
+}
+
+#
+# Usage: _ab_authenticate
+#
+# Read account conf, update domain conf and perform user authentication to acquire an access token
+#
+# Variables
+#   AB_Key
+#   AB_User
+#   AB_Pass
+#   AB_Token
+#
+_ab_authenticate() {
+  AB_Key="${AB_Key:-$(_readaccountconf_mutable AB_Key)}"
+  AB_User="${AB_User:-$(_readaccountconf_mutable AB_User)}"
+  AB_Pass="${AB_Pass:-$(_readaccountconf_mutable AB_Pass)}"
+
+  if [ -z "$AB_Key" ] || [ -z "$AB_User" ] || [ -z "$AB_Pass" ]; then
+    AB_Key=""
+    AB_User=""
+    AB_Pass=""
+    _err "Either the ArubaBusiness API key, the user or the password has not been defined yet."
+    _err "Please configure them and try again."
+    return 1
+  fi
+
+  _saveaccountconf_mutable AB_Key "$AB_Key"
+  _saveaccountconf_mutable AB_User "$AB_User"
+  _saveaccountconf_mutable AB_Pass "$AB_Pass"
+
+  if ! _ab_get_token || [ -z "$AB_Token" ]; then
+    _err "Failed to acquire an access token"
+    return 1
+  fi
+
+  return 0
+}
+
+#
+# Usage: _ab_get_token
+#
+# Try acquiring a temporary access token. The token should have a 24h lifespan
+#
+# Variables
+#   _ab_user_enc
+#   _ab_pass_enc
+#   _ab_authdata
+#   AB_User
+#   AB_Pass
+#   AB_Token
+#   response
+#   _H2
+#
+_ab_get_token() {
+  _ab_user_enc=$(printf "%s" "$AB_User" | _url_encode)
+  _ab_pass_enc=$(printf "%s" "$AB_Pass" | _url_encode)
+  _ab_authdata="grant_type=password&username=$_ab_user_enc&password=$_ab_pass_enc"
+
+  _H2="Content-Type: application/x-www-form-urlencoded"
+
+  if ! _ab_rest POST "auth/token" "$_ab_authdata" || ! _contains "$response" "access_token"; then
+    _err "Authentication failure"
+    return 1
+  fi
+
+  AB_Token="$(printf "%s" "$response" | _egrep_o '"access_token":"[^\"]*"' | cut -d : -f 2 | tr -d '"')"
+
+  if [ -z "$AB_Token" ]; then
+    _err "Could not extract access token"
+    return 1
+  fi
+
+  _debug "Acquired access token"
+  return 0
+}
+
+#
+# Usage: _ab_rest POST "example/endpoint" "password=123"
+#
+# Perform a REST request using the given method, endpoint and data
+#
+# Variables
+#   _method: $1 - The http method
+#   _endpoint: $2 - The api path (relative to $ARUBABUSINESS_API)
+#   _data: $3 - The body of the request (optional)
+#   _key_trimmed
+#   _token_trimmed
+#   _ret_code
+#   AB_Key
+#   AB_Token
+#   ARUBABUSINESS_API
+#   _H1
+#   _H2
+#   _H3
+#   _H4
+#
+_ab_rest() {
+  _method=$1
+  _endpoint="$2"
+  _data="$3"
+
+  _key_trimmed=$(printf "%s" "$AB_Key" | tr -d '"')
+  _token_trimmed=$(printf "%s" "$AB_Token" | tr -d '"')
+
+  _H1="Accept: application/json"
+
+  if [ -z "$_H2" ]; then
+    # Default to application/json
+    _H2="Content-Type: application/json"
+  fi
+
+  if [ "$_key_trimmed" ]; then
+    _H3="Authorization-Key: $_key_trimmed"
+  else
+    _err "Missing Api Key"
+    _ab_cleanup_headers
+    return 1
+  fi
+
+  if [ "$_token_trimmed" ]; then
+    _H4="Authorization: Bearer $_token_trimmed"
+  else
+    _debug "No access token set"
+  fi
+
+  if [ "$_method" != "GET" ]; then
+    response="$(_post "$_data" "$ARUBABUSINESS_API/$_endpoint" "" "$_method")"
+  else
+    response="$(_get "$ARUBABUSINESS_API/$_endpoint")"
+  fi
+
+  _ret_code=$?
+
+  if [ "$_ret_code" = "0" ] && _ab_call_is_success; then
+    # Normalize the json response
+    response="$(printf "%s" "$response" | _normalizeJson)"
+    _ret_code=0
+  else
+    _err "Failed to call endpoint: $_endpoint"
+    _ret_code=1
+  fi
+
+  _ab_cleanup_headers
+
+  return $_ret_code
+}
+
+#
+# Usage: _ab_cleanup_headers
+#
+# Unset header variables to avoid interfering with other calls
+#
+# Variables
+#   _H1
+#   _H2
+#   _H3
+#   _H4
+#
+_ab_cleanup_headers() {
+  # Cleanup request headers
+  unset _H1 _H2 _H3 _H4 _H5
+
+  # Cleanup response headers
+  if [ -f "$HTTP_HEADER" ]; then
+    : >"$HTTP_HEADER"
+  fi
+}
+
+#
+# Usage: _ab_call_is_success
+#
+# Check whether a call's response http status is one of 200, 201, 202 or 204 (other 2xx are not handled)
+#
+# Variables
+#   _status
+#   _http_status
+#   _success_http_codes
+#   HTTP_HEADER
+#
+_ab_call_is_success() {
+  _success_http_codes="200 201 202 204"
+  if [ -f "$HTTP_HEADER" ]; then
+    _http_status=$(_egrep_o "^HTTP[\/0-9. ]*" <"$HTTP_HEADER" | _head_n 1 | cut -d " " -f 2)
+    for _status in $_success_http_codes; do
+      if [ "$_status" = "$_http_status" ]; then
+        return 0
+      fi
+    done
+  fi
+
+  return 1
+}

dnsapi/dns_autodns.sh

@@ -139,12 +139,21 @@ _get_autodns_zone() {
   return 1
 }
 
+# Escape the XML special characters (& < > ' ") so that credentials
+# containing them do not break the request document (issue 5317).
+_autodns_xml_encode() {
+  sed "s/&/\&amp;/g;s/</\&lt;/g;s/>/\&gt;/g;s/'/\&apos;/g;s/\"/\&quot;/g"
+}
+
 _build_request_auth_xml() {
+  _autodns_user_xml="$(printf "%s" "$AUTODNS_USER" | _autodns_xml_encode)"
+  _autodns_password_xml="$(printf "%s" "$AUTODNS_PASSWORD" | _autodns_xml_encode)"
+  _autodns_context_xml="$(printf "%s" "$AUTODNS_CONTEXT" | _autodns_xml_encode)"
   printf "<auth>
     <user>%s</user>
     <password>%s</password>
     <context>%s</context>
-  </auth>" "$AUTODNS_USER" "$AUTODNS_PASSWORD" "$AUTODNS_CONTEXT"
+  </auth>" "$_autodns_user_xml" "$_autodns_password_xml" "$_autodns_context_xml"
 }
 
 # Arguments:

dnsapi/dns_aws.sh

@@ -11,7 +11,8 @@ Options:
 # All `_sleep` commands are included to avoid Route53 throttling, see
 # https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/DNSLimitations.html#limits-api-requests
 
-AWS_HOST="route53.amazonaws.com"
+# Updated from "route53.amazonaws.com"
+AWS_HOST="route53.global.api.aws"
 AWS_URL="https://$AWS_HOST"
 
 AWS_WIKI="https://github.com/acmesh-official/acme.sh/wiki/How-to-use-Amazon-Route53-API"

dnsapi/dns_azure.sh

@@ -9,7 +9,8 @@ Options:
  AZUREDNS_APPID App ID. App ID of the service principal
  AZUREDNS_CLIENTSECRET Client Secret. Secret from creating the service principal
  AZUREDNS_MANAGEDIDENTITY Use Managed Identity. Use Managed Identity assigned to a resource instead of a service principal. "true"/"false"
- AZUREDNS_BEARERTOKEN Bearer Token. Used instead of service principal credentials or managed identity. Optional.
+ AZUREDNS_BEARERTOKEN Bearer Token. Used instead of service principal credentials or managed identity. Not saved, provide it on every run. Optional.
+ AZUREDNS_PRIVATEZONE Use Azure Private DNS Zones instead of Public DNS Zones. "true"/"false"
 '
 
 wiki=https://github.com/acmesh-official/acme.sh/wiki/How-to-use-Azure-DNS
@@ -39,6 +40,12 @@ dns_azure_add() {
   #save subscription id to account conf file.
   _saveaccountconf_mutable AZUREDNS_SUBSCRIPTIONID "$AZUREDNS_SUBSCRIPTIONID"
 
+  AZUREDNS_PRIVATEZONE="${AZUREDNS_PRIVATEZONE:-$(_readaccountconf_mutable AZUREDNS_PRIVATEZONE)}"
+  if [ -n "$AZUREDNS_PRIVATEZONE" ]; then
+    #save public/private dns to account conf file.
+    _saveaccountconf_mutable AZUREDNS_PRIVATEZONE "$AZUREDNS_PRIVATEZONE"
+  fi
+
   AZUREDNS_MANAGEDIDENTITY="${AZUREDNS_MANAGEDIDENTITY:-$(_readaccountconf_mutable AZUREDNS_MANAGEDIDENTITY)}"
   if [ "$AZUREDNS_MANAGEDIDENTITY" = true ]; then
     _info "Using Azure managed identity"
@@ -47,13 +54,15 @@ dns_azure_add() {
     _saveaccountconf_mutable AZUREDNS_TENANTID ""
     _saveaccountconf_mutable AZUREDNS_APPID ""
     _saveaccountconf_mutable AZUREDNS_CLIENTSECRET ""
-    _saveaccountconf_mutable AZUREDNS_BEARERTOKEN ""
+    _clearaccountconf_mutable AZUREDNS_BEARERTOKEN
   else
     _info "You didn't ask to use Azure managed identity, checking service principal credentials or provided bearer token"
     AZUREDNS_TENANTID="${AZUREDNS_TENANTID:-$(_readaccountconf_mutable AZUREDNS_TENANTID)}"
     AZUREDNS_APPID="${AZUREDNS_APPID:-$(_readaccountconf_mutable AZUREDNS_APPID)}"
     AZUREDNS_CLIENTSECRET="${AZUREDNS_CLIENTSECRET:-$(_readaccountconf_mutable AZUREDNS_CLIENTSECRET)}"
-    AZUREDNS_BEARERTOKEN="${AZUREDNS_BEARERTOKEN:-$(_readaccountconf_mutable AZUREDNS_BEARERTOKEN)}"
+    #AZUREDNS_BEARERTOKEN is short-lived, so it is taken from the environment only and never
+    #read from or saved to the account conf. Versions up to 3.0.9 cached their internal access
+    #token under the same name, which must not be replayed as a user token (#7218).
     if [ -z "$AZUREDNS_BEARERTOKEN" ]; then
       if [ -z "$AZUREDNS_TENANTID" ]; then
         AZUREDNS_SUBSCRIPTIONID=""
@@ -93,7 +102,7 @@ dns_azure_add() {
     _saveaccountconf_mutable AZUREDNS_TENANTID "$AZUREDNS_TENANTID"
     _saveaccountconf_mutable AZUREDNS_APPID "$AZUREDNS_APPID"
     _saveaccountconf_mutable AZUREDNS_CLIENTSECRET "$AZUREDNS_CLIENTSECRET"
-    _saveaccountconf_mutable AZUREDNS_BEARERTOKEN "$AZUREDNS_BEARERTOKEN"
+    _clearaccountconf_mutable AZUREDNS_BEARERTOKEN
   fi
 
   if [ -z "$AZUREDNS_BEARERTOKEN" ]; then
@@ -110,7 +119,9 @@ dns_azure_add() {
   _debug _sub_domain "$_sub_domain"
   _debug _domain "$_domain"
 
-  acmeRecordURI="https://management.azure.com$(printf '%s' "$_domain_id" | sed 's/\\//g')/TXT/$_sub_domain?api-version=2017-09-01"
+  _azure_set_zone_vars
+
+  acmeRecordURI="https://management.azure.com$(printf '%s' "$_domain_id" | sed 's/\\//g')/TXT/$_sub_domain?api-version=$_azure_api_version"
   _debug "$acmeRecordURI"
   # Get existing TXT record
   _azure_rest GET "$acmeRecordURI" "" "$accesstoken"
@@ -136,7 +147,7 @@ dns_azure_add() {
     fi
   fi
   # Add the txtvalue TXT Record
-  body="{\"properties\":{\"metadata\":{\"acmetscheck\":\"$timestamp\"},\"TTL\":10, \"TXTRecords\":[$values]}}"
+  body="{\"properties\":{\"metadata\":{\"acmetscheck\":\"$timestamp\"},\"$_azure_ttl_key\":10, \"$_azure_txt_key\":[$values]}}"
   _azure_rest PUT "$acmeRecordURI" "$body" "$accesstoken"
   if [ "$_code" = "200" ] || [ "$_code" = '201' ]; then
     _info "validation value added"
@@ -167,6 +178,8 @@ dns_azure_rm() {
     return 1
   fi
 
+  AZUREDNS_PRIVATEZONE="${AZUREDNS_PRIVATEZONE:-$(_readaccountconf_mutable AZUREDNS_PRIVATEZONE)}"
+
   AZUREDNS_MANAGEDIDENTITY="${AZUREDNS_MANAGEDIDENTITY:-$(_readaccountconf_mutable AZUREDNS_MANAGEDIDENTITY)}"
   if [ "$AZUREDNS_MANAGEDIDENTITY" = true ]; then
     _info "Using Azure managed identity"
@@ -175,7 +188,7 @@ dns_azure_rm() {
     AZUREDNS_TENANTID="${AZUREDNS_TENANTID:-$(_readaccountconf_mutable AZUREDNS_TENANTID)}"
     AZUREDNS_APPID="${AZUREDNS_APPID:-$(_readaccountconf_mutable AZUREDNS_APPID)}"
     AZUREDNS_CLIENTSECRET="${AZUREDNS_CLIENTSECRET:-$(_readaccountconf_mutable AZUREDNS_CLIENTSECRET)}"
-    AZUREDNS_BEARERTOKEN="${AZUREDNS_BEARERTOKEN:-$(_readaccountconf_mutable AZUREDNS_BEARERTOKEN)}"
+    #AZUREDNS_BEARERTOKEN comes from the environment only, see the note in dns_azure_add
     if [ -z "$AZUREDNS_BEARERTOKEN" ]; then
       if [ -z "$AZUREDNS_TENANTID" ]; then
         AZUREDNS_SUBSCRIPTIONID=""
@@ -225,8 +238,11 @@ dns_azure_rm() {
   _debug _sub_domain "$_sub_domain"
   _debug _domain "$_domain"
 
-  acmeRecordURI="https://management.azure.com$(printf '%s' "$_domain_id" | sed 's/\\//g')/TXT/$_sub_domain?api-version=2017-09-01"
+  _azure_set_zone_vars
+
+  acmeRecordURI="https://management.azure.com$(printf '%s' "$_domain_id" | sed 's/\\//g')/TXT/$_sub_domain?api-version=$_azure_api_version"
   _debug "$acmeRecordURI"
+
   # Get existing TXT record
   _azure_rest GET "$acmeRecordURI" "" "$accesstoken"
   timestamp="$(_time)"
@@ -250,7 +266,7 @@ dns_azure_rm() {
       fi
     else
       # Remove only txtvalue from the TXT Record
-      body="{\"properties\":{\"metadata\":{\"acmetscheck\":\"$timestamp\"},\"TTL\":10, \"TXTRecords\":[$values]}}"
+      body="{\"properties\":{\"metadata\":{\"acmetscheck\":\"$timestamp\"},\"$_azure_ttl_key\":10, \"$_azure_txt_key\":[$values]}}"
       _azure_rest PUT "$acmeRecordURI" "$body" "$accesstoken"
       if [ "$_code" = "200" ] || [ "$_code" = '201' ]; then
         _info "validation value removed"
@@ -381,6 +397,21 @@ _azure_getaccess_token() {
   return 0
 }
 
+_azure_set_zone_vars() {
+  if [ "$AZUREDNS_PRIVATEZONE" = "true" ]; then
+    _azure_zone_type="privateDnsZones"
+    _azure_api_version="2024-06-01"
+    _azure_ttl_key="ttl"
+    _azure_txt_key="txtRecords"
+    _debug "Querying private DNS zone"
+  else
+    _azure_zone_type="dnszones"
+    _azure_api_version="2017-09-01"
+    _azure_ttl_key="TTL"
+    _azure_txt_key="TXTRecords"
+  fi
+}
+
 _get_root() {
   domain=$1
   subscriptionId=$2
@@ -388,6 +419,8 @@ _get_root() {
   i=1
   p=1
 
+  _azure_set_zone_vars
+
   ## Ref: https://learn.microsoft.com/en-us/rest/api/dns/zones/list?view=rest-dns-2018-05-01&tabs=HTTP
   ## returns up to 100 zones in one response. Handling more results is not implemented
   ## (ZoneListResult with continuation token for the next page of results)
@@ -396,7 +429,7 @@ _get_root() {
   ## https://learn.microsoft.com/en-us/azure/azure-resource-manager/management/azure-subscription-service-limits#azure-dns-limits
   ## The new limit is 250 Public DNS zones per subscription, while the old limit was only 100
   ##
-  _azure_rest GET "https://management.azure.com/subscriptions/$subscriptionId/providers/Microsoft.Network/dnszones?\$top=500&api-version=2017-09-01" "" "$accesstoken"
+  _azure_rest GET "https://management.azure.com/subscriptions/$subscriptionId/providers/Microsoft.Network/$_azure_zone_type?\$top=500&api-version=$_azure_api_version" "" "$accesstoken"
   # Find matching domain name in Json response
   while true; do
     h=$(printf "%s" "$domain" | cut -d . -f "$i"-100)

dnsapi/dns_baidu.sh

@@ -49,26 +49,95 @@ Options:
  Baidu_SK SecretAccessKey
 OptionsAlt:
  Baidu_BCD_Host API host, default: bcd.baidubce.com
+ Baidu_DNS_Host New DNS API host, default: dns.baidubce.com
+ Baidu_API_Preference Engine preference, default: auto
  Baidu_BCD_Version API version number, default: 1
  Baidu_BCD_Expire Signature expiration seconds, default: 3600
  Baidu_View Resolve view, default: DEFAULT
+ Baidu_Line New DNS line, default: default
  Baidu_TTL Resolve ttl seconds, default: 300
  Baidu_RM_Max Max records to delete in one run, default: 20
 '
 
 BAIDU_BCD_DEFAULT_HOST="bcd.baidubce.com"
+BAIDU_DNS_DEFAULT_HOST="dns.baidubce.com"
 
 # --- Public API ---
 dns_baidu_add() {
   fulldomain=$(_idn "$1")
   txtvalue=$2
 
-  if ! _baidu_prepare_record "$fulldomain"; then
-    _baidu_err "baidu_prepare_record failed for add: $fulldomain"
+  if ! _baidu_run_with_fallback "add" "$fulldomain" "$txtvalue"; then
+    _baidu_err "all baidu api engines failed for add: $fulldomain"
     return 1
   fi
 
-  if ! _baidu_find_record_ids "$_zone_name" "$_record_domain" "TXT" "$txtvalue"; then
+  return 0
+}
+
+dns_baidu_rm() {
+  fulldomain=$(_idn "$1")
+  txtvalue=$2
+
+  if ! _baidu_run_with_fallback "rm" "$fulldomain" "$txtvalue"; then
+    _baidu_err "all baidu api engines failed for delete: $fulldomain"
+    return 1
+  fi
+
+  return 0
+}
+
+_baidu_run_with_fallback() {
+  _action="$1"
+  _fulldomain="$2"
+  _txtvalue="$3"
+
+  if ! _baidu_load_credentials; then
+    _baidu_err "baidu_load_credentials failed"
+    return 1
+  fi
+
+  for _baidu_api_engine in $(_baidu_engine_order); do
+    if ! _baidu_prepare_record "$_fulldomain"; then
+      _baidu_info "prepare failed for engine: $_baidu_api_engine"
+      continue
+    fi
+
+    if [ "$_action" = "add" ]; then
+      if _baidu_add_record "$_txtvalue"; then
+        return 0
+      fi
+    else
+      if _baidu_rm_record "$_txtvalue"; then
+        return 0
+      fi
+    fi
+
+    _baidu_info "engine failed, try next if available: $_baidu_api_engine"
+  done
+
+  return 1
+}
+
+_baidu_engine_order() {
+  _pref="$(_lower_case "$(_baidu_trim_ws "${Baidu_API_Preference:-auto}")")"
+  case "$_pref" in
+  legacy)
+    printf "%s" "legacy new"
+    ;;
+  new)
+    printf "%s" "new legacy"
+    ;;
+  *)
+    printf "%s" "new legacy"
+    ;;
+  esac
+}
+
+_baidu_add_record() {
+  _txtvalue="$1"
+
+  if ! _baidu_find_record_ids_current "$_zone_name" "$_record_domain" "TXT" "$_txtvalue"; then
     _baidu_err "baidu_find_record_ids failed for add: $_record_domain.$_zone_name"
     return 1
   fi
@@ -85,16 +154,28 @@ dns_baidu_add() {
     _ttl="300"
     ;;
   esac
-  _view="$(_baidu_trim_ws "${Baidu_View:-DEFAULT}")"
-  txtvalue="$(_baidu_trim_ws "$txtvalue")"
+
+  txtvalue="$(_baidu_trim_ws "$_txtvalue")"
   _record_domain="$(_baidu_trim_ws "$_record_domain")"
   _zone_name="$(_baidu_trim_ws "$_zone_name")"
 
-  _body="$(_baidu_payload_add_txt "$_zone_name" "$_record_domain" "$txtvalue" "$_ttl" "$_view")"
-
-  if ! _baidu_bcd_post "/domain/resolve/add" "$_body"; then
-    _baidu_err "baidu_bcd_post failed: add record"
-    return 1
+  if [ "$_baidu_api_engine" = "new" ]; then
+    _line="$(_baidu_trim_ws "${Baidu_Line:-default}")"
+    if [ -z "$_line" ]; then
+      _line="default"
+    fi
+    _body="$(_baidu_payload_add_txt_dns "$_record_domain" "$txtvalue" "$_ttl" "$_line")"
+    if ! _baidu_dns_call "POST" "/v1/dns/zone/${_zone_name}/record" "$_body"; then
+      _baidu_err "baidu_dns_call failed: add record"
+      return 1
+    fi
+  else
+    _view="$(_baidu_trim_ws "${Baidu_View:-DEFAULT}")"
+    _body="$(_baidu_payload_add_txt "$_zone_name" "$_record_domain" "$txtvalue" "$_ttl" "$_view")"
+    if ! _baidu_bcd_post "/domain/resolve/add" "$_body"; then
+      _baidu_err "baidu_bcd_post failed: add record"
+      return 1
+    fi
   fi
 
   if _baidu_is_api_error "$response"; then
@@ -105,16 +186,10 @@ dns_baidu_add() {
   return 0
 }
 
-dns_baidu_rm() {
-  fulldomain=$(_idn "$1")
-  txtvalue=$2
+_baidu_rm_record() {
+  _txtvalue="$1"
 
-  if ! _baidu_prepare_record "$fulldomain"; then
-    _baidu_err "baidu_prepare_record failed for delete: $fulldomain"
-    return 1
-  fi
-
-  if ! _baidu_find_record_ids "$_zone_name" "$_record_domain" "TXT" "$txtvalue"; then
+  if ! _baidu_find_record_ids_current "$_zone_name" "$_record_domain" "TXT" "$_txtvalue"; then
     _baidu_err "baidu_find_record_ids failed for delete: $_record_domain.$_zone_name"
     return 1
   fi
@@ -138,28 +213,37 @@ dns_baidu_rm() {
   fi
 
   for _rid in $_ids; do
-    _body="$(_baidu_payload_delete "$_zone_name" "$_rid")"
-    if ! _baidu_bcd_post "/domain/resolve/delete" "$_body"; then
-      _baidu_err "baidu_bcd_post failed: delete recordId=$_rid"
-      return 1
-    fi
-    if _baidu_is_api_error "$response"; then
-      _baidu_err "$response"
-      return 1
+    if [ "$_baidu_api_engine" = "new" ]; then
+      if ! _baidu_dns_call "DELETE" "/v1/dns/zone/${_zone_name}/record/${_rid}" ""; then
+        _baidu_err "baidu_dns_call failed: delete recordId=$_rid"
+        return 1
+      fi
+    else
+      _body="$(_baidu_payload_delete "$_zone_name" "$_rid")"
+      if ! _baidu_bcd_post "/domain/resolve/delete" "$_body"; then
+        _baidu_err "baidu_bcd_post failed: delete recordId=$_rid"
+        return 1
+      fi
+      if _baidu_is_api_error "$response"; then
+        _baidu_err "$response"
+        return 1
+      fi
     fi
   done
 
-  if ! _baidu_find_record_ids "$_zone_name" "$_record_domain" "TXT" "$txtvalue"; then
-    _baidu_err "baidu_find_record_ids failed for delete verify: $_record_domain.$_zone_name"
-    return 1
-  fi
-  _left_ids="$_BAIDU_FIND_RESULT"
-  if [ -z "$_left_ids" ]; then
-    return 0
-  fi
-  if [ -n "$_left_ids" ]; then
-    _baidu_err "delete verification failed: $_record_domain.$_zone_name still has TXT records"
-    return 1
+  if [ "$_baidu_api_engine" = "legacy" ]; then
+    if ! _baidu_find_record_ids "$_zone_name" "$_record_domain" "TXT" "$_txtvalue"; then
+      _baidu_err "baidu_find_record_ids failed for delete verify: $_record_domain.$_zone_name"
+      return 1
+    fi
+    _left_ids="$_BAIDU_FIND_RESULT"
+    if [ -z "$_left_ids" ]; then
+      return 0
+    fi
+    if [ -n "$_left_ids" ]; then
+      _baidu_err "delete verification failed: $_record_domain.$_zone_name still has TXT records"
+      return 1
+    fi
   fi
 
   return 0
@@ -182,6 +266,7 @@ _baidu_load_credentials() {
   _saveaccountconf_mutable Baidu_SK "$Baidu_SK"
 
   BAIDU_BCD_HOST="${Baidu_BCD_Host:-$BAIDU_BCD_DEFAULT_HOST}"
+  BAIDU_DNS_HOST="${Baidu_DNS_Host:-$BAIDU_DNS_DEFAULT_HOST}"
   BAIDU_BCD_VERSION="${Baidu_BCD_Version:-1}"
 
   return 0
@@ -189,13 +274,16 @@ _baidu_load_credentials() {
 
 _baidu_prepare_record() {
   _fulldomain="$1"
-  if ! _baidu_load_credentials; then
-    _baidu_err "baidu_load_credentials failed"
-    return 1
-  fi
-  if ! _baidu_get_root "$_fulldomain"; then
-    _baidu_err "Could not find zone for $_fulldomain"
-    return 1
+  if [ "$_baidu_api_engine" = "new" ]; then
+    if ! _baidu_get_root_dns "$_fulldomain"; then
+      _baidu_err "Could not find zone by new dns api for $_fulldomain"
+      return 1
+    fi
+  else
+    if ! _baidu_get_root "$_fulldomain"; then
+      _baidu_err "Could not find zone by legacy bcd api for $_fulldomain"
+      return 1
+    fi
   fi
   _record_domain="$_sub_domain"
   _zone_name="$_domain"
@@ -234,6 +322,43 @@ _baidu_get_root() {
   done
 }
 
+_baidu_get_root_dns() {
+  domain=$1
+  i=1
+  p=1
+
+  while true; do
+    h=$(printf "%s" "$domain" | cut -d . -f "$i"-100)
+    if [ -z "$h" ]; then
+      _baidu_err "invalid domain: $domain"
+      return 1
+    fi
+
+    if ! _baidu_dns_call "GET" "/v1/dns/zone/${h}/record" ""; then
+      _baidu_info "baidu_dns_call failed: list zones"
+    elif ! _baidu_is_api_error "$response" && (_contains "$response" "\"records\"" || _contains "$response" "\"maxKeys\""); then
+      _sub_domain=$(printf "%s" "$domain" | cut -d . -f 1-"$p")
+      _domain=$h
+      if [ "$_sub_domain" = "$_domain" ]; then
+        _sub_domain="@"
+      fi
+      _baidu_info "zone matched by dns api: $_domain (host: $_sub_domain)"
+      return 0
+    fi
+
+    p=$i
+    i=$(_math "$i" + 1)
+  done
+}
+
+_baidu_find_record_ids_current() {
+  if [ "$_baidu_api_engine" = "new" ]; then
+    _baidu_find_record_ids_dns "$@"
+  else
+    _baidu_find_record_ids "$@"
+  fi
+}
+
 _baidu_find_record_ids() {
   _zone_name="$1"
   _record_domain="$2"
@@ -293,6 +418,39 @@ EOF
   _BAIDU_FIND_RESULT="$_ids"
 }
 
+_baidu_find_record_ids_dns() {
+  _zone_name="$1"
+  _record_domain="$2"
+  _rdtype="$3"
+  _rdata="$4"
+  _BAIDU_FIND_RESULT=""
+
+  if ! _baidu_dns_call "GET" "/v1/dns/zone/${_zone_name}/record" ""; then
+    _baidu_err "baidu_dns_call failed: list records"
+    return 1
+  fi
+
+  if _baidu_is_api_error "$response"; then
+    _baidu_err "baidu_dns error: $(_baidu_json_get_str "$response" "code") $(_baidu_json_get_str "$response" "message")"
+    return 1
+  fi
+
+  _normalized="$(printf "%s" "$response" | _normalizeJson)"
+  _records=$(printf "%s" "$_normalized" | sed 's/},{/}\n{/g')
+  _ids=""
+
+  while IFS= read -r _line; do
+    _id="$(_baidu_match_record_id_dns "$_line" "$_record_domain" "$_rdtype" "$_rdata")"
+    if [ "$_id" ]; then
+      _ids="$_ids $_id"
+    fi
+  done <<EOF
+$_records
+EOF
+
+  _BAIDU_FIND_RESULT="$_ids"
+}
+
 # --- HTTP ---
 _baidu_bcd_post() {
   _api_path="$1"
@@ -317,18 +475,17 @@ _baidu_bcd_post() {
     return 1
   fi
 
-  _H1="Authorization: $_auth"
-  _H2="x-bce-date: $_ts"
-  _H3="x-bce-content-sha256: $_payload_hash"
-  _H4="Host: $BAIDU_BCD_HOST"
-  _H5=""
-
   _url="https://${BAIDU_BCD_HOST}${_uri}"
   _signed_headers_dbg="$(printf "%s" "$_auth" | cut -d / -f 5)"
   _baidu_info "POST ${_uri}"
   _baidu_info "signedHeaders: $_signed_headers_dbg"
   _baidu_info "payload_sha256: $_payload_hash"
   _baidu_debug "baidu_bcd.http.payload" "$(_baidu_dbg_trim "$(_baidu_redact_txt "$_payload")")"
+  _H1="Authorization: $_auth"
+  _H2="x-bce-date: $_ts"
+  _H3="x-bce-content-sha256: $_payload_hash"
+  _H4="Host: $BAIDU_BCD_HOST"
+  _H5=""
   response="$(_post "$_payload" "$_url" "" "POST" "$_content_type")"
   _ret="$?"
   _baidu_info "ret: $_ret"
@@ -344,6 +501,56 @@ _baidu_bcd_post() {
   return 0
 }
 
+_baidu_dns_call() {
+  _method="$1"
+  _uri="$2"
+  _payload="$3"
+  _content_type="application/json"
+  _attempt=1
+  _max_attempts=3
+
+  while [ "$_attempt" -le "$_max_attempts" ]; do
+    _ts="$(date -u +"%Y-%m-%dT%H:%M:%SZ")"
+    _payload_hash="$(printf "%s" "$_payload" | _digest sha256 hex)"
+
+    if ! _baidu_bce_auth "$_method" "$_uri" "" "$BAIDU_DNS_HOST" "$_ts" "${Baidu_BCD_Expire:-3600}" "$_content_type" "$_payload_hash"; then
+      _baidu_err "baidu_dns auth failed"
+      return 1
+    fi
+    _auth="$_BAIDU_BCE_AUTH_RESULT"
+    _url="https://${BAIDU_DNS_HOST}${_uri}"
+
+    # Route through acme.sh's _get/_post (they honor _H1.._H5); no raw curl.
+    _H1="Authorization: $_auth"
+    _H2="x-bce-date: $_ts"
+    _H3="x-bce-content-sha256: $_payload_hash"
+    _H4="Host: $BAIDU_DNS_HOST"
+    _H5="Content-Type: $_content_type"
+
+    if [ "$_method" = "GET" ]; then
+      response="$(_get "$_url")"
+    elif [ "$_method" = "DELETE" ]; then
+      response="$(_post "" "$_url" "" "DELETE")"
+    else
+      response="$(_post "$_payload" "$_url")"
+    fi
+    _ret="$?"
+    _baidu_info "${_method} ${_uri} ret=${_ret}"
+
+    # Baidu may return a business error (Exception / 平台服务繁忙) inside HTTP 200.
+    if [ "$_ret" = "0" ] && ! _contains "$response" "\"code\":\"Exception\"" && ! _contains "$response" "平台服务繁忙"; then
+      return 0
+    fi
+
+    if [ "$_attempt" -lt "$_max_attempts" ]; then
+      sleep 2
+    fi
+    _attempt=$(_math "$_attempt" + 1)
+  done
+
+  return 1
+}
+
 # --- Auth / Signing ---
 _baidu_bce_auth() {
   # Signing algorithm (bce-auth-v1):
@@ -499,6 +706,14 @@ _baidu_payload_add_txt() {
   printf "%s" "{\"domain\":\"${_domain}\",\"view\":\"${_view}\",\"rdType\":\"TXT\",\"ttl\":${_ttl},\"rdata\":\"${_rdata}\",\"zoneName\":\"${_zoneName}\"}"
 }
 
+_baidu_payload_add_txt_dns() {
+  _rr="$(printf "%s" "$1" | tr -d '\r\n' | sed 's/\\/\\\\/g; s/"/\\"/g')"
+  _value="$(printf "%s" "$2" | tr -d '\r\n' | sed 's/\\/\\\\/g; s/"/\\"/g')"
+  _ttl="$3"
+  _line="$(printf "%s" "$4" | tr -d '\r\n' | sed 's/\\/\\\\/g; s/"/\\"/g')"
+  printf "%s" "{\"rr\":\"${_rr}\",\"type\":\"TXT\",\"value\":\"${_value}\",\"ttl\":${_ttl},\"line\":\"${_line}\",\"description\":\"acme.sh\"}"
+}
+
 _baidu_payload_delete() {
   _zoneName="$(_baidu_json_escape "$1")"
   _recordId="$2"
@@ -541,6 +756,18 @@ _baidu_match_record_id() {
   printf "%s" "$_line" | _egrep_o "\"recordId\": *[0-9]*" | _head_n 1 | cut -d : -f 2 | tr -d " "
 }
 
+_baidu_match_record_id_dns() {
+  _line="$1"
+  _rr="$(printf "%s" "$2" | tr -d '\r\n' | sed 's/\\/\\\\/g; s/"/\\"/g')"
+  _type="$(printf "%s" "$3" | tr -d '\r\n' | sed 's/\\/\\\\/g; s/"/\\"/g')"
+  _value="$(printf "%s" "$4" | tr -d '\r\n' | sed 's/\\/\\\\/g; s/"/\\"/g')"
+  case "$_line" in
+  *"\"rr\":\"${_rr}\""*"\"type\":\"${_type}\""*"\"value\":\"${_value}\""*)
+    printf "%s" "$_line" | sed -n 's/.*"id":"\{0,1\}\([^",}]*\)"\{0,1\}.*/\1/p' | _head_n 1
+    ;;
+  esac
+}
+
 _baidu_hmac_sha256_hexkey() {
   _key_hex="$1"
   _msg="$2"

dnsapi/dns_bergdns.sh

@@ -0,0 +1,348 @@
+#!/usr/bin/env sh
+# shellcheck disable=SC2034
+dns_bergdns_info='bergdns.at
+Site: bergdns.at
+Docs: github.com/acmesh-official/acme.sh/wiki/dnsapi2#dns_bergdns
+Options:
+ BERGDNS_API_KEY API key, as issued in the account UI. Needs read (to find the zone and the record) and write over the challenge names.
+ BERGDNS_API_URL API base URL. Optional. Default "https://bergdns.at/v1".
+ BERGDNS_TTL TTL of the challenge record, in seconds. Optional. Default "60".
+ BERGDNS_PROPAGATION_TIMEOUT Seconds to wait for the record to reach every secondary. Optional. Default "60". "0" does not wait.
+Issues: github.com/acmesh-official/acme.sh/issues/7261
+Author: Kenny Kropp <https://github.com/kekropp>
+'
+
+_BERGDNS_DEFAULT_URL='https://bergdns.at/v1'
+_BERGDNS_DEFAULT_TTL='60'
+_BERGDNS_DEFAULT_WAIT='60'
+
+########  Public functions  ####################################################
+
+# Usage: dns_bergdns_add _acme-challenge.www.example.com "token"
+# The value is added to the RRset, so a domain and its wildcard can be
+# validated at the same time.
+dns_bergdns_add() {
+  fulldomain=$(echo "$1" | _lower_case)
+  txtvalue=$2
+
+  _bergdns_init || return 1
+  _bergdns_find_zone "$fulldomain" || return 1
+  _bergdns_find_rrset "$fulldomain" || return 1
+
+  _info "Adding TXT $fulldomain in zone $_bergdns_zone_name"
+  if [ -z "$_bergdns_rrset_id" ]; then
+    if _bergdns_rest POST "zones/$_bergdns_zone_id/rrsets" \
+      "{\"name\":\"$fulldomain\",\"type\":\"TXT\",\"ttl\":$BERGDNS_TTL,\"records\":[\"\\\"$txtvalue\\\"\"]}"; then
+      _bergdns_rrset_id=$(echo "$response" | _egrep_o '"id":"[^"]*"' | _head_n 1 | cut -d '"' -f 4)
+      _debug _bergdns_rrset_id "$_bergdns_rrset_id"
+      _bergdns_wait "$fulldomain"
+      return 0
+    fi
+    if [ "$_bergdns_code" != "rrset_exists" ]; then
+      _err "bergdns: could not add the challenge record: $_bergdns_error"
+      return 1
+    fi
+    # another run created it since the lookup above
+    _bergdns_find_rrset "$fulldomain" || return 1
+    if [ -z "$_bergdns_rrset_id" ]; then
+      _err "bergdns: could not find the challenge record at $fulldomain"
+      return 1
+    fi
+  fi
+
+  if ! _bergdns_rest POST \
+    "zones/$_bergdns_zone_id/rrsets/$_bergdns_rrset_id/records" \
+    "{\"records\":[\"\\\"$txtvalue\\\"\"]}"; then
+    _err "bergdns: could not add the challenge record: $_bergdns_error"
+    return 1
+  fi
+
+  _bergdns_wait "$fulldomain"
+}
+
+# Usage: dns_bergdns_rm _acme-challenge.www.example.com "token"
+# Only this value is removed. Removing the last value deletes the RRset, and
+# removing a value that does not exist is not an error.
+dns_bergdns_rm() {
+  fulldomain=$(echo "$1" | _lower_case)
+  txtvalue=$2
+
+  _bergdns_init || return 1
+  _bergdns_find_zone "$fulldomain" || return 1
+  _bergdns_find_rrset "$fulldomain" || return 1
+
+  if [ -z "$_bergdns_rrset_id" ]; then
+    _info "bergdns: no TXT records at $fulldomain, nothing to remove"
+    return 0
+  fi
+
+  _info "Removing TXT $fulldomain from zone $_bergdns_zone_name"
+  if ! _bergdns_rest DELETE \
+    "zones/$_bergdns_zone_id/rrsets/$_bergdns_rrset_id/records" \
+    "{\"records\":[\"\\\"$txtvalue\\\"\"]}"; then
+    # Any flavour of not-found is a cleanup that has already happened: the
+    # RRset was removed by a previous run, or by the other half of a
+    # domain-and-wildcard pair taking the last value with it.
+    if [ "$_bergdns_status" = "404" ]; then
+      _info "bergdns: $fulldomain holds no such record any more, nothing to remove"
+      return 0
+    fi
+    _err "bergdns: could not remove the challenge record: $_bergdns_error"
+    return 1
+  fi
+  return 0
+}
+
+########  Private functions  ###################################################
+
+_bergdns_init() {
+  BERGDNS_API_KEY="${BERGDNS_API_KEY:-$(_readaccountconf_mutable BERGDNS_API_KEY)}"
+  BERGDNS_API_URL="${BERGDNS_API_URL:-$(_readaccountconf_mutable BERGDNS_API_URL)}"
+  BERGDNS_TTL="${BERGDNS_TTL:-$(_readaccountconf_mutable BERGDNS_TTL)}"
+  BERGDNS_PROPAGATION_TIMEOUT="${BERGDNS_PROPAGATION_TIMEOUT:-$(_readaccountconf_mutable BERGDNS_PROPAGATION_TIMEOUT)}"
+
+  if [ -z "$BERGDNS_API_KEY" ]; then
+    BERGDNS_API_KEY=""
+    _clearaccountconf_mutable BERGDNS_API_KEY
+    _err "You have not set BERGDNS_API_KEY. Create a key in the bergdns UI and export it:"
+    _err "  export BERGDNS_API_KEY=\"bgd_...\""
+    return 1
+  fi
+
+  [ -n "$BERGDNS_API_URL" ] || BERGDNS_API_URL="$_BERGDNS_DEFAULT_URL"
+  [ -n "$BERGDNS_TTL" ] || BERGDNS_TTL="$_BERGDNS_DEFAULT_TTL"
+  [ -n "$BERGDNS_PROPAGATION_TIMEOUT" ] || BERGDNS_PROPAGATION_TIMEOUT="$_BERGDNS_DEFAULT_WAIT"
+
+  # strip trailing slashes
+  BERGDNS_API_URL=$(echo "$BERGDNS_API_URL" | sed 's#/*$##')
+
+  # The TTL is interpolated into the request body and the timeout is counted
+  # down in arithmetic, so a stray value from the environment or from an old
+  # account.conf has to be caught here rather than become malformed JSON and
+  # an opaque 400.
+  case "$BERGDNS_TTL" in
+  *[!0-9]* | '')
+    _err "bergdns: BERGDNS_TTL must be a number of seconds, not \"$BERGDNS_TTL\"."
+    return 1
+    ;;
+  esac
+  case "$BERGDNS_PROPAGATION_TIMEOUT" in
+  *[!0-9]* | '')
+    _err "bergdns: BERGDNS_PROPAGATION_TIMEOUT must be a number of seconds, not \"$BERGDNS_PROPAGATION_TIMEOUT\"."
+    return 1
+    ;;
+  esac
+
+  _saveaccountconf_mutable BERGDNS_API_KEY "$BERGDNS_API_KEY"
+  # Only what the user actually chose is written back, and a value equal to
+  # the default clears any older setting. Persisting a default would pin the
+  # install to today's value, and a later change to the shipped one -- a move
+  # of the API base above all -- would never reach it; leaving an old setting
+  # in place would mean the environment could never put one back to default.
+  if [ "$BERGDNS_API_URL" = "$_BERGDNS_DEFAULT_URL" ]; then
+    _clearaccountconf_mutable BERGDNS_API_URL
+  else
+    _saveaccountconf_mutable BERGDNS_API_URL "$BERGDNS_API_URL"
+  fi
+  if [ "$BERGDNS_TTL" = "$_BERGDNS_DEFAULT_TTL" ]; then
+    _clearaccountconf_mutable BERGDNS_TTL
+  else
+    _saveaccountconf_mutable BERGDNS_TTL "$BERGDNS_TTL"
+  fi
+  if [ "$BERGDNS_PROPAGATION_TIMEOUT" = "$_BERGDNS_DEFAULT_WAIT" ]; then
+    _clearaccountconf_mutable BERGDNS_PROPAGATION_TIMEOUT
+  else
+    _saveaccountconf_mutable BERGDNS_PROPAGATION_TIMEOUT "$BERGDNS_PROPAGATION_TIMEOUT"
+  fi
+  return 0
+}
+
+# Usage: _bergdns_find_zone _acme-challenge.www.example.com
+# Sets _bergdns_zone_id and _bergdns_zone_name.
+# Zones are addressed by an id, not by name, so the zone list is fetched once
+# and the longest matching zone name wins.
+_bergdns_find_zone() {
+  _bergdns_fqdn=$1
+  _bergdns_zone_id=""
+  _bergdns_zone_name=""
+
+  if ! _bergdns_rest GET "zones"; then
+    _err "bergdns: could not list zones: $_bergdns_error"
+    return 1
+  fi
+
+  # one zone object per line, so id and name stay together
+  _bergdns_zone_lines=$(echo "$response" | tr '{' '\n')
+
+  _bergdns_cand="$_bergdns_fqdn"
+  while [ -n "$_bergdns_cand" ]; do
+    _bergdns_line=$(echo "$_bergdns_zone_lines" | _bergdns_select "$_bergdns_cand" | _head_n 1)
+    if [ -n "$_bergdns_line" ]; then
+      _bergdns_zone_id=$(echo "$_bergdns_line" | _egrep_o '"id":"[^"]*"' | _head_n 1 | cut -d '"' -f 4)
+      _bergdns_zone_name="$_bergdns_cand"
+      _debug _bergdns_zone_id "$_bergdns_zone_id"
+      _debug _bergdns_zone_name "$_bergdns_zone_name"
+      [ -n "$_bergdns_zone_id" ] && return 0
+      break
+    fi
+    case "$_bergdns_cand" in
+    *.*) _bergdns_cand=${_bergdns_cand#*.} ;;
+    *) _bergdns_cand="" ;;
+    esac
+  done
+
+  _err "bergdns: no zone in this account holds $_bergdns_fqdn."
+  _err "bergdns: the key must be able to read the zone as well as write the record."
+  return 1
+}
+
+# Usage: _bergdns_find_rrset _acme-challenge.www.example.com
+# Sets _bergdns_rrset_id to the id of the TXT RRset at that name, or to an
+# empty string if there is none. Records are addressed by id, so the zone's
+# RRsets are listed to find it.
+_bergdns_find_rrset() {
+  _bergdns_fqdn=$1
+  _bergdns_rrset_id=""
+
+  if ! _bergdns_rest GET "zones/$_bergdns_zone_id/rrsets"; then
+    _err "bergdns: could not list the records of $_bergdns_zone_name: $_bergdns_error"
+    return 1
+  fi
+
+  _bergdns_line=$(echo "$response" | tr '{' '\n' | _bergdns_select "$_bergdns_fqdn" TXT | _head_n 1)
+  if [ -n "$_bergdns_line" ]; then
+    _bergdns_rrset_id=$(echo "$_bergdns_line" | _egrep_o '"id":"[^"]*"' | _head_n 1 | cut -d '"' -f 4)
+  fi
+  _debug _bergdns_rrset_id "$_bergdns_rrset_id"
+  return 0
+}
+
+# Usage: ... | _bergdns_select name [type]
+# Reads one JSON object per line and prints those whose "name" is name and,
+# when a type is given, whose "type" is that type. The two fields are matched
+# one at a time, so neither the order the server writes its keys in nor
+# anything sitting between them changes the answer.
+#
+# The comparison is a shell case, which is literal by construction: grep -F
+# does not exist on Solaris, and _contains and _startswith would read the name
+# as a regular expression. Each pattern anchors on the start of the object or
+# on the comma before the key, so a key that merely ends in "name" cannot
+# match.
+_bergdns_select() {
+  _bergdns_sel_name=$1
+  _bergdns_sel_type=$2
+  while IFS= read -r _bergdns_sel_line || [ -n "$_bergdns_sel_line" ]; do
+    case "$_bergdns_sel_line" in
+    '"name":"'"$_bergdns_sel_name"'"'* | *',"name":"'"$_bergdns_sel_name"'"'*) ;;
+    *) continue ;;
+    esac
+    if [ -n "$_bergdns_sel_type" ]; then
+      case "$_bergdns_sel_line" in
+      '"type":"'"$_bergdns_sel_type"'"'* | *',"type":"'"$_bergdns_sel_type"'"'*) ;;
+      *) continue ;;
+      esac
+    fi
+    printf '%s\n' "$_bergdns_sel_line"
+  done
+}
+
+# Usage: _bergdns_wait _acme-challenge.www.example.com
+# Polls the propagation endpoint until all bergdns nameservers serve the
+# record. A timeout is logged but does not fail the issuance.
+#
+# This covers the zone transfer from the primary to the secondaries, which
+# takes seconds; the resolver side is acme.sh's own _check_dns_entries, which
+# runs after every record has been added and has a timeout of its own.
+_bergdns_wait() {
+  _bergdns_fqdn=$1
+  if [ "$BERGDNS_PROPAGATION_TIMEOUT" = "0" ] || [ -z "$_bergdns_rrset_id" ]; then
+    return 0
+  fi
+
+  _bergdns_waited=0
+  while [ "$_bergdns_waited" -lt "$BERGDNS_PROPAGATION_TIMEOUT" ]; do
+    if _bergdns_rest GET "zones/$_bergdns_zone_id/rrsets/$_bergdns_rrset_id/propagation"; then
+      case "$response" in
+      *'"propagated":true'*)
+        _info "bergdns: $_bergdns_fqdn is served by every secondary after ${_bergdns_waited}s"
+        return 0
+        ;;
+      esac
+    elif [ "$_bergdns_code" = "propagation_unavailable" ]; then
+      # propagation checks are not configured on this server
+      _info "bergdns: this deployment does not offer propagation checks; not waiting"
+      return 0
+    else
+      case "$_bergdns_status" in
+      429) ;; # rate limited, worth another go
+      4*)
+        # The check is refused rather than pending, and waiting will not
+        # change that. _check_dns_entries still has to pass, so this is not
+        # the place to fail the issuance.
+        _info "bergdns: the propagation check is unavailable ($_bergdns_error); not waiting"
+        return 0
+        ;;
+      esac
+    fi
+    _sleep 5
+    _bergdns_waited=$((_bergdns_waited + 5))
+  done
+
+  _info "bergdns: $_bergdns_fqdn was not on every secondary after ${BERGDNS_PROPAGATION_TIMEOUT}s; continuing anyway"
+  return 0
+}
+
+# Usage: _bergdns_rest method endpoint [body]
+# Sets response and _bergdns_status. On failure also sets _bergdns_error and,
+# where the API itself answered, _bergdns_code.
+_bergdns_rest() {
+  _bergdns_method=$1
+  _bergdns_endpoint=$2
+  _bergdns_body=$3
+  _bergdns_error=""
+  _bergdns_code=""
+  _bergdns_status=""
+
+  export _H1="Authorization: Bearer $BERGDNS_API_KEY"
+  export _H2="Accept: application/json"
+
+  _bergdns_url="$BERGDNS_API_URL/$_bergdns_endpoint"
+  _debug _bergdns_url "$_bergdns_url"
+
+  # drop the headers of the previous request, so that a request which never
+  # reaches the server cannot be read as carrying its status
+  if [ -f "$HTTP_HEADER" ]; then
+    : >"$HTTP_HEADER"
+  fi
+
+  if [ "$_bergdns_method" = "GET" ]; then
+    response="$(_get "$_bergdns_url")"
+  else
+    _debug2 _bergdns_body "$_bergdns_body"
+    response="$(_post "$_bergdns_body" "$_bergdns_url" "" "$_bergdns_method" "application/json")"
+  fi
+  _bergdns_ret="$?"
+  _debug2 response "$response"
+
+  if [ "$_bergdns_ret" != "0" ]; then
+    _bergdns_error="the request to $_bergdns_url could not be made"
+    return 1
+  fi
+
+  _bergdns_status="$(grep "^HTTP" "$HTTP_HEADER" | _tail_n 1 | cut -d " " -f 2 | tr -d "\r\n")"
+  _debug _bergdns_status "$_bergdns_status"
+
+  # The HTTP status decides. Errors from the API itself are RFC 9457
+  # problem+json and carry a "detail" to show and a stable "code" to branch on,
+  # but a request that never gets that far -- bergdns.at answers from behind a
+  # reverse proxy, whose 502 and 504 are HTML -- has neither, and reading the
+  # body alone would take those for success.
+  case "$_bergdns_status" in
+  2*) return 0 ;;
+  esac
+  _bergdns_error=$(echo "$response" | _egrep_o '"detail":"[^"]*"' | _head_n 1 | cut -d '"' -f 4)
+  _bergdns_code=$(echo "$response" | _egrep_o '"code":"[^"]*"' | _head_n 1 | cut -d '"' -f 4)
+  [ -n "$_bergdns_error" ] || _bergdns_error="$_bergdns_url answered HTTP ${_bergdns_status:-(none)}"
+  _debug _bergdns_code "$_bergdns_code"
+  return 1
+}

dnsapi/dns_bhosted.sh

@@ -323,21 +323,21 @@ _bhosted_extract_id() {
   fi
 
   # JSON: "id":12345
-  _id="$(printf "%s" "$_resp" | _egrep_o '"id"[[:space:]]*:[[:space:]]*[0-9]+' | _head_n 1 | tr -cd '0-9')"
+  _id="$(printf "%s" "$_resp" | _egrep_o '"id"[ ]*:[ ]*[0-9]+' | _head_n 1 | tr -cd '0-9')"
   if [ -n "$_id" ]; then
     printf "%s" "$_id"
     return 0
   fi
 
   # key=value: id=12345
-  _id="$(printf "%s" "$_resp" | _egrep_o '(^|[[:space:][:punct:]])id[[:space:]]*=[[:space:]]*[0-9]+' | _head_n 1 | tr -cd '0-9')"
+  _id="$(printf "%s" "$_resp" | _egrep_o '(^|[^0-9a-zA-Z])id[ ]*=[ ]*[0-9]+' | _head_n 1 | tr -cd '0-9')"
   if [ -n "$_id" ]; then
     printf "%s" "$_id"
     return 0
   fi
 
   # "record id 12345" / "recordid 12345"
-  _id="$(printf "%s" "$_resp" | _egrep_o '(record[[:space:]]*id|recordid)[^0-9]*[0-9]+' | _head_n 1 | tr -cd '0-9')"
+  _id="$(printf "%s" "$_resp" | _egrep_o '(record[ ]*id|recordid)[^0-9]*[0-9]+' | _head_n 1 | tr -cd '0-9')"
   if [ -n "$_id" ]; then
     printf "%s" "$_id"
     return 0

dnsapi/dns_calrissia.sh

@@ -0,0 +1,137 @@
+#!/usr/bin/env sh
+# shellcheck disable=SC2034
+dns_calrissia_info='Calrissia.be DNS API
+Site: calrissia.be
+Docs: github.com/acmesh-official/acme.sh/wiki/dnsapi2#dns_calrissia
+Options:
+ CALRISSIA_TOKEN Personal access token
+Issues: github.com/acmesh-official/acme.sh/issues/6809
+Author: Ward Hus
+'
+
+CALRISSIA_API="https://my.calrissia.com/api"
+
+dns_calrissia_add() {
+  fulldomain="$1"
+  txtvalue="$2"
+
+  _calrissia_load_token || return 1
+
+  if ! _calrissia_get_root "$fulldomain"; then
+    _err "Unable to find domain in Calrissia account for: $fulldomain"
+    return 1
+  fi
+
+  _debug "domain='$_domain' id='$_domain_id' sub='$_sub_domain'"
+  _info "Adding TXT record for $fulldomain"
+
+  _body="{\"name\":\"$_sub_domain\",\"type\":\"TXT\",\"content\":\"$txtvalue\",\"ttl\":120,\"prio\":0}"
+  _response="$(_calrissia_request POST "/domain/$_domain_id/record" "$_body")"
+
+  if ! _contains "$_response" '"id"'; then
+    _err "Failed to create TXT record: $_response"
+    return 1
+  fi
+
+  return 0
+}
+
+dns_calrissia_rm() {
+  fulldomain="$1"
+  txtvalue="$2"
+
+  _calrissia_load_token || return 1
+
+  if ! _calrissia_get_root "$fulldomain"; then
+    _err "Unable to find domain in Calrissia account for: $fulldomain"
+    return 1
+  fi
+
+  _debug "domain='$_domain' id='$_domain_id' sub='$_sub_domain'"
+
+  # Look the record up from the API instead of relying on local state.
+  # The record list is embedded in the domain object.
+  _response="$(_calrissia_request GET "/domain/$_domain_id")"
+  _debug2 "Response: $_response"
+
+  # Split the record objects onto separate lines, then match on both the
+  # subdomain name and the TXT value to find the record id to delete.
+  _record_id="$(printf "%s" "$_response" |
+    tr '{}' '\n' |
+    grep "\"name\" *: *\"$_sub_domain\"" |
+    grep "\"content\" *: *\"$txtvalue\"" |
+    _egrep_o '"id" *: *[0-9]+' |
+    _head_n 1 |
+    _egrep_o '[0-9]+')"
+
+  if [ -z "$_record_id" ]; then
+    _info "No matching TXT record found for $fulldomain; nothing to remove"
+    return 0
+  fi
+
+  _info "Removing TXT record id=$_record_id from domain id=$_domain_id"
+  if ! _response="$(_calrissia_request DELETE "/domain/$_domain_id/record/$_record_id")" || _contains "$_response" '"error"'; then
+    _err "Failed to remove TXT record: $_response"
+    return 1
+  fi
+  return 0
+}
+
+####################
+# Private helpers  #
+####################
+
+_calrissia_load_token() {
+  CALRISSIA_TOKEN="${CALRISSIA_TOKEN:-$(_readaccountconf_mutable CALRISSIA_TOKEN)}"
+  if [ -z "$CALRISSIA_TOKEN" ]; then
+    _err "CALRISSIA_TOKEN is not set. Generate one at https://identity.calrissia.com under API Keys."
+    return 1
+  fi
+  _saveaccountconf_mutable CALRISSIA_TOKEN "$CALRISSIA_TOKEN"
+}
+
+# Sets _domain, _domain_id, _sub_domain for a given FQDN.
+_calrissia_get_root() {
+  _fqdn="$1"
+
+  i=1
+  while true; do
+    _candidate="$(printf "%s" "$_fqdn" | cut -d . -f "$i"-)"
+    [ -z "$_candidate" ] && return 1
+
+    _debug "Trying root domain: $_candidate"
+    _response="$(_calrissia_request GET "/domain?full_domain_name=$_candidate")"
+    _debug2 "Response: $_response"
+
+    _domain_id="$(printf "%s" "$_response" |
+      _egrep_o '"id" *: *[0-9]+' |
+      _head_n 1 |
+      _egrep_o '[0-9]+')"
+
+    if [ -n "$_domain_id" ]; then
+      if [ "$i" = "1" ]; then
+        # The FQDN itself is the zone apex, e.g. a challenge-alias domain.
+        _sub_domain=""
+      else
+        _sub_domain="$(printf "%s" "$_fqdn" | cut -d . -f "1-$((i - 1))")"
+      fi
+      _domain="$_candidate"
+      return 0
+    fi
+
+    i=$((i + 1))
+  done
+}
+
+_calrissia_request() {
+  _method="$1"
+  _path="$2"
+  _body="$3"
+  export _H1="Authorization: Bearer $CALRISSIA_TOKEN"
+  export _H2="Accept: application/json"
+  if [ "$_method" = "GET" ]; then
+    _get "$CALRISSIA_API$_path"
+  else
+    _post "$_body" "$CALRISSIA_API$_path" "" "$_method" "application/json"
+  fi
+}

dnsapi/dns_cdmon.sh

@@ -0,0 +1,137 @@
+#!/usr/bin/env sh
+# shellcheck disable=SC2034
+
+dns_cdmon_info='cdmon
+Site: www.cdmon.com
+Docs: github.com/acmesh-official/acme.sh/wiki/dnsapi#dns_cdmon
+Options:
+ CDMON_Key API Key
+'
+
+CDMON_Api="https://api-domains.cdmon.services/api-domains"
+
+########  Public functions #####################
+# Usage: add  _acme-challenge.www.domain.com   "XKrxpRBosdIKFzxW_CT3KLZNf6q0HG9i01zxXp5CPBs"
+# Used to add txt record
+dns_cdmon_add() {
+  fulldomain=$1
+  txtvalue=$2
+
+  CDMON_Key="${CDMON_Key:-$(_readaccountconf_mutable CDMON_Key)}"
+
+  if [ -z "$CDMON_Key" ]; then
+    CDMON_Key=""
+    _err "You didn't specify your cdmon api key yet."
+    _err "Please create your key and try again."
+    return 1
+  fi
+
+  _saveaccountconf_mutable CDMON_Key "$CDMON_Key"
+
+  _debug "First, we detect the root zone"
+  if ! _get_root "$fulldomain"; then
+    _err "invalid domain"
+    return 1
+  fi
+
+  _debug _sub_domain "$_sub_domain"
+  _debug _domain "$_domain"
+  _info "Adding record"
+  if _cdmon_rest "dnsrecords/create" "{\"data\":{\"type\":\"TXT\",\"domain\":\"$_domain\",\"value\":\"$txtvalue\",\"ttl\":120,\"host\":\"$_sub_domain\"}}"; then
+    if _contains "$response" "\"status\":\"ok\""; then
+      _info "Added, OK"
+      return 0
+    else
+      _err "Add txt record error."
+      return 1
+    fi
+  fi
+  _err "Add txt record error."
+  return 1
+}
+
+# Usage: fulldomain txtvalue
+# Used to remove the txt record after validation
+dns_cdmon_rm() {
+  fulldomain=$1
+  txtvalue=$2
+
+  CDMON_Key="${CDMON_Key:-$(_readaccountconf_mutable CDMON_Key)}"
+  _debug "First, we detect the root zone"
+  if ! _get_root "$fulldomain"; then
+    _err "invalid domain"
+    return 1
+  fi
+
+  _debug _sub_domain "$_sub_domain"
+  _debug _domain "$_domain"
+
+  _info "Removing record"
+  if _cdmon_rest "dnsrecords/delete" "{\"data\":{\"value\":\"$txtvalue\",\"type\":\"TXT\",\"domain\":\"$_domain\",\"host\":\"$_sub_domain\"}}"; then
+    if _contains "$response" "\"status\":\"ok\""; then
+      _info "Deleted, OK"
+      return 0
+    else
+      _err "Delete txt record error."
+      return 1
+    fi
+  fi
+  _err "Delete txt record error."
+  return 1
+}
+
+####################  Private functions below ##################################
+#_acme-challenge.www.domain.com
+#returns
+# _sub_domain=_acme-challenge.www
+# _domain=domain.com
+_get_root() {
+  domain=$1
+  i=1
+  p=1
+
+  if ! _cdmon_rest "domains/list"; then
+    return 1
+  fi
+
+  while true; do
+    h=$(printf "%s" "$domain" | cut -d . -f "$i"-100)
+    _debug h "$h"
+    if [ -z "$h" ]; then
+      #not valid
+      return 1
+    fi
+    if _contains "$response" "\"domain\":\"$h\""; then
+      _sub_domain=$(printf "%s" "$domain" | cut -d . -f 1-"$p")
+      _domain=$h
+      return 0
+    fi
+    p=$i
+    i=$(_math "$i" + 1)
+  done
+  return 1
+}
+
+_cdmon_rest() {
+  ep="$1"
+  data="$2"
+  _debug "$ep"
+
+  key_trimmed=$(echo "$CDMON_Key" | tr -d '"')
+
+  export _H1="Content-Type: application/json"
+  export _H2="apikey: $key_trimmed"
+
+  _debug data "$data"
+  response="$(_post "$data" "$CDMON_Api/$ep")"
+  _ret="$?"
+
+  unset _H1 _H2
+
+  if [ "$_ret" != "0" ]; then
+    _err "error $ep"
+    return 1
+  fi
+  _debug2 response "$response"
+  return 0
+}

dnsapi/dns_cloudns.sh

@@ -135,7 +135,7 @@ _dns_cloudns_init_check() {
   _dns_cloudns_http_api_call "dns/login.json" ""
 
   if ! _contains "$response" "\"status\":\"Success\""; then
-    _err "Invalid CLOUDNS_AUTH_ID or CLOUDNS_AUTH_PASSWORD. Please check your login credentials."
+    _err "Invalid CLOUDNS_AUTH_ID or CLOUDNS_AUTH_PASSWORD. Server response: $response"
     return 1
   fi
 

dnsapi/dns_cn.sh

@@ -15,7 +15,8 @@ CN_API="https://beta.api.core-networks.de"
 ########  Public functions  #####################
 
 dns_cn_add() {
-  fulldomain=$1
+  # Core-Networks API requires punycode for IDN domains
+  fulldomain=$(_idn "$1")
   txtvalue=$2
 
   if ! _cn_login; then
@@ -58,7 +59,8 @@ dns_cn_add() {
 }
 
 dns_cn_rm() {
-  fulldomain=$1
+  # Core-Networks API requires punycode for IDN domains
+  fulldomain=$(_idn "$1")
   txtvalue=$2
 
   if ! _cn_login; then

dnsapi/dns_comlaude.sh

@@ -0,0 +1,248 @@
+#!/usr/bin/env sh
+
+# shellcheck disable=SC2034
+dns_comlaude_info='comlaude.com
+Site: comlaude.com
+Docs: github.com/acmesh-official/acme.sh/wiki/dnsapi2#dns_comlaude
+Options:
+ COMLAUDE_USERNAME User account
+ COMLAUDE_PASSWORD User password
+ COMLAUDE_API_KEY generated API key
+ COMLAUDE_GROUP_ID Group ID in comlaude user profile
+ Get it from the https://www.comlaude.com
+Issues: github.com/acmesh-official/acme.sh/issues/7112
+'
+# ===== CONFIG =====
+COMLAUDE_API="https://api.comlaude.com"
+
+########## AUTH ##########
+
+_comlaude_auth() {
+  _debug "Checking cached ComLaude token"
+
+  # Try to get token from account.conf
+  if [ -z "$COMLAUDE_ACCESS_TOKEN" ]; then
+    COMLAUDE_ACCESS_TOKEN="$(_readaccountconf_mutable COMLAUDE_ACCESS_TOKEN)"
+    COMLAUDE_TOKEN_EXPIRY="$(_readaccountconf_mutable COMLAUDE_TOKEN_EXPIRY)"
+  fi
+
+  _now=$(_time)
+  if [ -n "$COMLAUDE_ACCESS_TOKEN" ] && [ -n "$COMLAUDE_TOKEN_EXPIRY" ] && [ "$_now" -lt "$COMLAUDE_TOKEN_EXPIRY" ]; then
+    _debug "Using cached ComLaude token (valid ${COMLAUDE_TOKEN_EXPIRY} > ${_now})"
+    return 0
+  fi
+
+  _info "ComLaude auth..."
+  _comlaude_body="{\"username\":\"$COMLAUDE_USERNAME\",\"password\":\"$COMLAUDE_PASSWORD\",\"api_key\":\"$COMLAUDE_API_KEY\"}"
+  _comlaude_response="$(_post "$_comlaude_body" "$COMLAUDE_API/api_login" "" "POST" "application/json")"
+
+  if ! _contains "$_comlaude_response" "access_token"; then
+    _err "Auth failed: $_comlaude_response"
+    return 1
+  fi
+
+  COMLAUDE_ACCESS_TOKEN=$(echo "$_comlaude_response" | _egrep_o '"access_token":"[^"]*"' | cut -d'"' -f4)
+  # store expiracy from api reply l'API ("expires_in" in seconds)
+  _comlaude_expires_in=$(echo "$_comlaude_response" | _egrep_o '"expires_in":[0-9]*' | cut -d: -f2)
+  [ -z "$_comlaude_expires_in" ] && _comlaude_expires_in=3000 # fallback if no info
+
+  COMLAUDE_TOKEN_EXPIRY=$(($(_time) + _comlaude_expires_in - 60)) # margin of 60s to secure renew
+
+  _saveaccountconf_mutable COMLAUDE_ACCESS_TOKEN "$COMLAUDE_ACCESS_TOKEN"
+  _saveaccountconf_mutable COMLAUDE_TOKEN_EXPIRY "$COMLAUDE_TOKEN_EXPIRY"
+
+  return 0
+}
+
+########## DOMAIN RESOLUTION ##########
+
+_comlaude_get_root() {
+  COMLAUDE_GROUP_ID="${COMLAUDE_GROUP_ID:-$(_readaccountconf_mutable COMLAUDE_GROUP_ID)}"
+  if [ -z "$COMLAUDE_GROUP_ID" ]; then
+    _err "Missing COMLAUDE_GROUP_ID"
+    return 1
+  fi
+
+  _comlaude_input_domain="$1"
+  _comlaude_input_domain="${_comlaude_input_domain#_acme-challenge.}"
+  case "$_comlaude_input_domain" in
+  \*.*) _comlaude_input_domain="${_comlaude_input_domain#*.}" ;;
+  esac
+
+  _debug "Normalized domain: $_comlaude_input_domain"
+
+  _comlaude_i=1
+  while true; do
+    _comlaude_d=$(printf "%s" "$_comlaude_input_domain" | cut -d . -f "$_comlaude_i-")
+    [ -z "$_comlaude_d" ] && {
+      _debug "No matching domain found for $_comlaude_input_domain"
+      return 1
+    }
+
+    # don't test unnecessary levels
+    # registered domain : TLD only (no dot after cut).
+    case "$_comlaude_d" in
+    *.*) : ;;
+    *)
+      _debug "Skipping bare TLD candidate: $_comlaude_d"
+      _comlaude_i=$((_comlaude_i + 1))
+      continue
+      ;;
+    esac
+
+    _debug "Checking domain: $_comlaude_d"
+
+    _comlaude_retry=0
+    _comlaude_max_retry=3 # to avoid network errors
+    _comlaude_DOM_ID=""
+    _comlaude_Z_ID=""
+
+    while [ "$_comlaude_retry" -lt "$_comlaude_max_retry" ]; do
+      export _H1="Authorization: Bearer $COMLAUDE_ACCESS_TOKEN"
+      _debug "Full URL: $COMLAUDE_API/groups/$COMLAUDE_GROUP_ID/domains?filter[name]=$_comlaude_d&fields=id,name,active_zone"
+      _comlaude_response="$(_get "$COMLAUDE_API/groups/$COMLAUDE_GROUP_ID/domains?filter[name]=$_comlaude_d&fields=id,name,active_zone")"
+      _H1=""
+
+      _debug "RAW response for $_comlaude_d (try $((_comlaude_retry + 1))): $_comlaude_response"
+
+      # If empty -> true network issue, we retry
+      if [ -z "$_comlaude_response" ]; then
+        _comlaude_retry=$((_comlaude_retry + 1))
+        [ "$_comlaude_retry" -lt "$_comlaude_max_retry" ] && sleep 2
+        continue
+      fi
+
+      # 404 -> domain not found in that level. no retry : continue
+      if echo "$_comlaude_response" | grep -q '"status_code":404'; then
+        _debug "404 for $_comlaude_d, moving to next level (not retrying)"
+        break
+      fi
+
+      # Domain missing (200 reply, data empty) -> continue
+      if echo "$_comlaude_response" | grep -q '"data":\[\]'; then
+        _debug "Empty data for $_comlaude_d, moving to next level"
+        break
+      fi
+
+      # Extraction via _egrep_o
+      _comlaude_DOM_ID="$(echo "$_comlaude_response" | _egrep_o '"id":"[^"]*"' | head -n1 | cut -d':' -f2 | tr -d '"')"
+      _comlaude_Z_ID="$(echo "$_comlaude_response" | _egrep_o '"active_zone":\{"id":"[^"]*"' | _egrep_o '"id":"[^"]*"$' | cut -d':' -f2 | tr -d '"')"
+
+      if [ -n "$_comlaude_DOM_ID" ] && [ -n "$_comlaude_Z_ID" ]; then
+        break
+      fi
+
+      # 200 reply but malformed data /  noid -> retry transport
+      _comlaude_retry=$((_comlaude_retry + 1))
+      [ "$_comlaude_retry" -lt "$_comlaude_max_retry" ] && sleep 2
+    done
+
+    _debug "_comlaude_DOM_ID=$_comlaude_DOM_ID"
+    _debug "_comlaude_Z_ID=$_comlaude_Z_ID"
+
+    if [ -n "$_comlaude_DOM_ID" ] && [ -n "$_comlaude_Z_ID" ]; then
+      _comlaude_domain="$_comlaude_d"
+      _comlaude_domain_id="$_comlaude_DOM_ID"
+      _comlaude_zone_id="$_comlaude_Z_ID"
+      return 0
+    fi
+
+    _comlaude_i=$((_comlaude_i + 1))
+  done
+}
+########## ADD TXT ##########
+
+dns_comlaude_add() {
+  fulldomain="$1"
+  txtvalue="$2"
+
+  COMLAUDE_USERNAME="${COMLAUDE_USERNAME:-$(_readaccountconf_mutable COMLAUDE_USERNAME)}"
+  COMLAUDE_PASSWORD="${COMLAUDE_PASSWORD:-$(_readaccountconf_mutable COMLAUDE_PASSWORD)}"
+  COMLAUDE_API_KEY="${COMLAUDE_API_KEY:-$(_readaccountconf_mutable COMLAUDE_API_KEY)}"
+  COMLAUDE_GROUP_ID="${COMLAUDE_GROUP_ID:-$(_readaccountconf_mutable COMLAUDE_GROUP_ID)}"
+
+  if [ -z "$COMLAUDE_USERNAME" ] || [ -z "$COMLAUDE_PASSWORD" ] || [ -z "$COMLAUDE_API_KEY" ]; then
+    _err "You didn't specify ComLaude credentials (COMLAUDE_USERNAME, COMLAUDE_PASSWORD, COMLAUDE_API_KEY)."
+    return 1
+  fi
+
+  # Backup variable after validation
+  _saveaccountconf_mutable COMLAUDE_USERNAME "$COMLAUDE_USERNAME"
+  _saveaccountconf_mutable COMLAUDE_PASSWORD "$COMLAUDE_PASSWORD"
+  _saveaccountconf_mutable COMLAUDE_API_KEY "$COMLAUDE_API_KEY"
+  _saveaccountconf_mutable COMLAUDE_GROUP_ID "$COMLAUDE_GROUP_ID"
+
+  _info "Adding TXT: $fulldomain"
+  _comlaude_auth || return 1
+  _comlaude_get_root "$fulldomain" || return 1
+
+  _debug "Root: $_comlaude_domain"
+
+  _comlaude_data="{\"type\":\"TXT\",\"name\":\"$fulldomain\",\"value\":\"$txtvalue\",\"ttl\":60}"
+
+  export _H1="Authorization: Bearer $COMLAUDE_ACCESS_TOKEN"
+  export _H2="Content-Type: application/json"
+
+  _comlaude_response="$(_post "$_comlaude_data" "$COMLAUDE_API/groups/$COMLAUDE_GROUP_ID/zones/$_comlaude_zone_id/records")"
+
+  _H1=""
+  _H2=""
+  if ! echo "$_comlaude_response" | grep -q '"id"'; then
+    _err "Failed to create TXT"
+    _debug "$_comlaude_response"
+    return 1
+  fi
+
+  return 0
+}
+
+########## REMOVE TXT ##########
+
+dns_comlaude_rm() {
+  fulldomain="$1"
+  txtvalue="$2"
+
+  COMLAUDE_USERNAME="${COMLAUDE_USERNAME:-$(_readaccountconf_mutable COMLAUDE_USERNAME)}"
+  COMLAUDE_PASSWORD="${COMLAUDE_PASSWORD:-$(_readaccountconf_mutable COMLAUDE_PASSWORD)}"
+  COMLAUDE_API_KEY="${COMLAUDE_API_KEY:-$(_readaccountconf_mutable COMLAUDE_API_KEY)}"
+  COMLAUDE_GROUP_ID="${COMLAUDE_GROUP_ID:-$(_readaccountconf_mutable COMLAUDE_GROUP_ID)}"
+
+  _info "Removing TXT: $fulldomain"
+
+  _comlaude_auth || return 1
+  _comlaude_get_root "$fulldomain" || return 1
+
+  export _H1="Authorization: Bearer $COMLAUDE_ACCESS_TOKEN"
+  _comlaude_encoded_name="$(printf '%s' "$fulldomain" | _url_encode)"
+  _comlaude_encoded_value="$(printf '%s' "$txtvalue" | _url_encode)"
+  _comlaude_url="$COMLAUDE_API/groups/$COMLAUDE_GROUP_ID/zones/$_comlaude_zone_id/records?filter[type]=TXT&filter[name]=$_comlaude_encoded_name&filter[value]=$_comlaude_encoded_value"
+  _comlaude_response="$(_get "$_comlaude_url")"
+  _H1=""
+
+  _debug "Filtered records response: $_comlaude_response"
+
+  # first "id" top-level of reply (record itself,
+  # always on first position of each data[] object)
+  _comlaude_record_id="$(echo "$_comlaude_response" | _egrep_o '"data":\[\{"id":"[^"]*"' | _egrep_o '"[^"]*"$' | tr -d '"')"
+
+  if [ -z "$_comlaude_record_id" ]; then
+    _info "No matching TXT record found to delete for $fulldomain / $txtvalue"
+    return 0
+  fi
+
+  _debug "Deleting record $_comlaude_record_id"
+
+  export _H1="Authorization: Bearer $COMLAUDE_ACCESS_TOKEN"
+  _comlaude_del_url="$COMLAUDE_API/groups/$COMLAUDE_GROUP_ID/zones/$_comlaude_zone_id/records/$_comlaude_record_id"
+  _comlaude_del_resp="$(_post "" "$_comlaude_del_url" "" "DELETE")"
+  _H1=""
+
+  if echo "$_comlaude_del_resp" | grep -q '"error"'; then
+    _err "Delete failed for $_comlaude_record_id"
+    _debug "$_comlaude_del_resp"
+    return 1
+  fi
+
+  _info "Deleted record $_comlaude_record_id"
+  return 0
+}

dnsapi/dns_cpanel.sh

@@ -38,7 +38,7 @@ dns_cpanel_add() {
   fi
   # adding entry
   _info "Adding the entry"
-  stripped_fulldomain=$(echo "$fulldomain" | sed "s/.$_domain//")
+  stripped_fulldomain="${fulldomain%."$_domain"}"
   _debug "Adding $stripped_fulldomain to $_domain zone"
   _myget "json-api/cpanel?cpanel_jsonapi_apiversion=2&cpanel_jsonapi_module=ZoneEdit&cpanel_jsonapi_func=add_zone_record&domain=$_domain&name=$stripped_fulldomain&type=TXT&txtdata=$txtvalue&ttl=1"
   if _successful_update; then return 0; fi
@@ -128,13 +128,27 @@ _get_root() {
     _err "Primary domain list not found!"
     return 1
   fi
-  for _domain in $_domains; do
-    _debug "Checking if $fulldomain ends with $_domain"
-    if (_endswith "$fulldomain" "$_domain"); then
-      _debug "Root domain: $_domain"
-      return 0
-    fi
+  # Pick the LONGEST matching zone, dot-anchored: with both domain.tld and
+  # sub.domain.tld zones on the account, cPanel stores the record in the
+  # most specific zone, so add and rm must both resolve to that one.
+  _domain=""
+  for d in $_domains; do
+    _debug "Checking if $fulldomain ends with $d"
+    # case with quoted patterns gives an exact literal suffix match;
+    # _endswith treats the needle as a regex, so its dots would let
+    # xdomain.tld wrongly match zone domain.tld
+    case "$fulldomain" in
+    "$d" | *".$d")
+      if [ "${#d}" -gt "${#_domain}" ]; then
+        _domain="$d"
+      fi
+      ;;
+    esac
   done
+  if [ -n "$_domain" ]; then
+    _debug "Root domain: $_domain"
+    return 0
+  fi
   return 1
 }
 

dnsapi/dns_creoline.sh

@@ -0,0 +1,181 @@
+#!/usr/bin/env sh
+# shellcheck disable=SC2034
+dns_creoline_info='creoline
+Site: https://www.creoline.com/de
+Docs: github.com/acmesh-official/acme.sh/wiki/dnsapi2#dns_creoline
+Help: https://help.creoline.com
+Options:
+ creolineApiToken
+ creolineApiSecret
+Issues: github.com/acmesh-official/acme.sh/issues/7103
+'
+
+creolineApi="https://api.creoline.com/v1"
+
+########  Public functions #####################
+
+# Usage: add _acme-challenge.www.domain.com "XKrxpRBosdIKFzxW_CT3KLZNf6q0HG9i01zxXp5CPB8"
+dns_creoline_add() {
+  fulldomain=$1
+  txtvalue=$2
+
+  creolineApiToken="${creolineApiToken:-$(_readaccountconf_mutable creolineApiToken)}"
+  creolineApiSecret="${creolineApiSecret:-$(_readaccountconf_mutable creolineApiSecret)}"
+
+  if [ -z "$creolineApiToken" ] || [ -z "$creolineApiSecret" ]; then
+    _err "Error required creoline API Token or creoline API Secret not specified."
+    _err "Please set it with the Command 'export creolineApiToken=<YourToken>' and 'export creolineApiSecret=<YourSecret>'."
+    return 1
+  else
+    _saveaccountconf_mutable creolineApiToken "$creolineApiToken"
+    _saveaccountconf_mutable creolineApiSecret "$creolineApiSecret"
+  fi
+
+  _debug "Detecting the root dns zone."
+  if ! _get_root "$fulldomain"; then
+    _err "Error on detecting the root dns zone."
+    return 1
+  fi
+
+  _info "Adding record"
+  if _creoline_rest POST "dns/zone/$_domain/record" "{\"type\":\"TXT\",\"host\":\"$_sub_domain\",\"record\":\"$txtvalue\",\"ttl\":\"60\"}"; then
+    if _contains "$response" "$txtvalue"; then
+      _info "Added, OK"
+      return 0
+    else
+      _err "Add txt record error."
+      return 1
+    fi
+  fi
+  _err "Add txt record error."
+  return 1
+}
+
+#fulldomain txtvalue
+dns_creoline_rm() {
+  fulldomain=$1
+  txtvalue=$2
+
+  creolineApiToken="${creolineApiToken:-$(_readaccountconf_mutable creolineApiToken)}"
+  creolineApiSecret="${creolineApiSecret:-$(_readaccountconf_mutable creolineApiSecret)}"
+
+  _debug "Detecting the root dns zone."
+  if ! _get_root "$fulldomain"; then
+    _err "Error on detecting the root dns zone."
+    return 1
+  fi
+
+  _info "Getting earlier created txt record."
+  if ! _creoline_rest GET "dns/zone/$_domain/record/type/TXT/record/$txtvalue"; then
+    if _contains "$response" "errors" || _contains "$response" "message"; then
+      _err "Error on getting earlier created txt record."
+      return 1
+    fi
+    _err "Error on getting earlier created txt record."
+    return 1
+  fi
+
+  record_id=$(echo "$response" | _egrep_o "\"id\"[ ]*:[ ]*[0-9]+" | cut -d : -f 2 | tr -d \" | _head_n 1 | tr -d " ")
+  _debug "record_id" "$record_id"
+
+  if [ -z "$record_id" ]; then
+    _err "Error on deleting earlier created txt record. No record id found in response."
+    return 1
+  fi
+
+  _info "Deleting earlier created txt record."
+  if ! _creoline_rest DELETE "dns/zone/$_domain/record/$record_id"; then
+    if _contains "$response" "errors" || _contains "$response" "message"; then
+      _err "Error on deleting earlier created txt record."
+      return 1
+    fi
+    _err "Error on deleting earlier created txt record."
+    return 1
+  fi
+
+  _info "Deleted, OK"
+  return 0
+}
+
+####################  Private functions below ##################################
+#_acme-challenge.www.domain.com
+#returns
+# _sub_domain=_acme-challenge.www
+# _domain=domain.com
+_get_root() {
+  domain=$1
+  if ! _creoline_rest GET "dns/zone/root/$domain"; then
+    return 1
+  fi
+
+  _sub_domain=$(echo "$response" | _egrep_o "\"subDomain\"[ ]*:[ ]*\"[^\"]+\"" | cut -d : -f 2 | tr -d \" | _head_n 1 | tr -d " ")
+  _debug _sub_domain "$_sub_domain"
+
+  _domain=$(echo "$response" | _egrep_o "\"domain\"[ ]*:[ ]*\"[^\"]+\"" | cut -d : -f 2 | tr -d \" | _head_n 1 | tr -d " ")
+  _debug _domain "$_domain"
+
+  if [ -z "$_domain" ] || [ -z "$_sub_domain" ]; then
+    return 1
+  fi
+}
+
+_creoline_rest() {
+  method=$1
+  uri="$2"
+  data="$3"
+  timestamp=$(_time)
+  canonical_request="${timestamp}.${creolineApi}/${uri}"
+  signature_hash=$(printf "%s" "$canonical_request" | _hmac sha256 "$(printf "%s" "$creolineApiSecret" | _hex_dump | tr -d " ")" hex)
+
+  _debug method "$method"
+  _debug uri "$uri"
+  _debug data "$data"
+
+  _debug2 timestamp "$timestamp"
+  _debug2 canonical_request "$canonical_request"
+  _debug2 signature_hash "$signature_hash"
+
+  token_trimmed=$(echo "$creolineApiToken" | tr -d '"')
+  hmac_trimmed=$(echo "$signature_hash" | tr -d '"')
+
+  export _H1="Content-Type: application/json"
+
+  if [ "$token_trimmed" ]; then
+    export _H2="X-Api-Token: $token_trimmed"
+  fi
+
+  if [ "$hmac_trimmed" ]; then
+    export _H3="X-Creoline-Api-Signature: $hmac_trimmed"
+  fi
+
+  if [ "$timestamp" ]; then
+    export _H4="X-Creoline-Api-Timestamp: $timestamp"
+  fi
+
+  if [ "$method" != "GET" ]; then
+    response="$(_post "$data" "$creolineApi/$uri" "" "$method")"
+  else
+    response="$(_get "$creolineApi/$uri")"
+  fi
+
+  if [ "$?" != "0" ]; then
+    _err "error $uri"
+    return 1
+  fi
+
+  _debug response "$response"
+
+  if _contains "$response" "errors"; then
+    error=$(echo "$response" | _egrep_o "\"errors\":[[]*\"[^\"]+\"" | cut -d : -f 2 | tr -d \" | tr -d "[")
+    _err "Error: $error"
+    _err "URI:$uri"
+    return 1
+  elif _contains "$response" "message"; then
+    message=$(echo "$response" | _egrep_o "\"message\"[ ]*:[ ]*\"[^\"]+\"" | cut -d : -f 2 | tr -d \")
+    _err "Error: $message"
+    _err "URI:$uri"
+    return 1
+  fi
+
+  return 0
+}

dnsapi/dns_cyon.sh

@@ -285,15 +285,15 @@ _cyon_delete_txt() {
 
   list_txt_url="https://my.cyon.ch/domain/dnseditor/list-async"
 
-  list_txt_response="$(_get "${list_txt_url}" | sed -e 's/data-hash/\\ndata-hash/g')"
+  list_txt_response="$(_get "${list_txt_url}")"
   _debug list_txt_response "${list_txt_response}"
 
   if ! _cyon_check_if_2fa_missed "${list_txt_response}"; then return 1; fi
 
   # Find and delete all acme challenge entries for the $fulldomain.
-  _dns_entries="$(printf "%b\n" "${list_txt_response}" | sed -n 's/data-hash=\\"\([^"]*\)\\" data-identifier=\\"\([^"]*\)\\".*/\1 \2/p')"
+  _dns_entries="$(printf "%s\n" "${list_txt_response}" | _egrep_o 'data-hash=\\"[^"]*\\" data-identifier=\\"[^"]*\\"' | sed 's/data-hash=\\"\([^"]*\)\\" data-identifier=\\"\([^"]*\)\\"/\1 \2/')"
 
-  printf "%s" "${_dns_entries}" | while read -r _hash _identifier; do
+  printf "%s\n" "${_dns_entries}" | while read -r _hash _identifier; do
     dns_type="$(printf "%s" "$_identifier" | cut -d'|' -f1)"
     dns_domain="$(printf "%s" "$_identifier" | cut -d'|' -f2)"
 

dnsapi/dns_czechia.sh

@@ -30,8 +30,9 @@ dns_czechia_add() {
     return 1
   fi
 
-  _cz=$(printf "%s" "$_current_zone" | _lower_case | sed 's/[[:space:]]//g; s/\.$//')
-  _tk=$(printf "%s" "$CZ_AuthorizationToken" | sed 's/^[[:space:]]*//; s/[[:space:]]*$//')
+  _czechia_tab="$(printf '\t')"
+  _cz=$(printf "%s" "$_current_zone" | _lower_case | sed "s/[ $_czechia_tab]//g; s/\.\$//")
+  _tk=$(printf "%s" "$CZ_AuthorizationToken" | sed "s/^[ $_czechia_tab]*//; s/[ $_czechia_tab]*\$//")
 
   if [ -z "$_cz" ] || [ -z "$_tk" ]; then
     _err "Missing zone or CZ_AuthorizationToken."
@@ -76,7 +77,7 @@ dns_czechia_add() {
     return 0
   fi
 
-  _nres="$(_normalizeJson "$_res")"
+  _nres="$(printf '%s' "$_res" | _normalizeJson)"
   if [ "$?" -ne 0 ] || [ -z "$_nres" ]; then
     _nres="$_res"
   fi
@@ -108,8 +109,9 @@ dns_czechia_rm() {
     return 1
   fi
 
-  _cz=$(printf "%s" "$_current_zone" | _lower_case | sed 's/[[:space:]]//g; s/\.$//')
-  _tk=$(printf "%s" "$CZ_AuthorizationToken" | sed 's/^[[:space:]]*//; s/[[:space:]]*$//')
+  _czechia_tab="$(printf '\t')"
+  _cz=$(printf "%s" "$_current_zone" | _lower_case | sed "s/[ $_czechia_tab]//g; s/\.\$//")
+  _tk=$(printf "%s" "$CZ_AuthorizationToken" | sed "s/^[ $_czechia_tab]*//; s/[ $_czechia_tab]*\$//")
 
   if [ -z "$_cz" ] || [ -z "$_tk" ]; then
     _err "Missing zone or CZ_AuthorizationToken."
@@ -180,12 +182,13 @@ _czechia_load_conf() {
 }
 
 _czechia_pick_zone() {
+  _czechia_pz_tab="$(printf '\t')"
   _fd=$(printf "%s" "$1" | _lower_case | sed 's/\.$//')
   _best_zone=""
 
   _zones_space=$(printf "%s" "$CZ_Zones" | sed 's/,/ /g')
   for _z in $_zones_space; do
-    _clean_z=$(printf "%s" "$_z" | _lower_case | sed 's/[[:space:]]//g; s/\.$//')
+    _clean_z=$(printf "%s" "$_z" | _lower_case | sed "s/[ $_czechia_pz_tab]//g; s/\.\$//")
     [ -z "$_clean_z" ] && continue
 
     case "$_fd" in

dnsapi/dns_da.sh

@@ -4,7 +4,7 @@ dns_da_info='DirectAdmin Server API
 Site: DirectAdmin.com/api.php
 Docs: github.com/acmesh-official/acme.sh/wiki/dnsapi#dns_da
 Options:
- DA_Api API Server URL. E.g. "https://remoteUser:remotePassword@da.domain.tld:8443"
+ DA_Api API Server URL. E.g. "https://remoteUser:remotePassword@da.domain.tld:8443". Special characters in the user/password must be percent-encoded, e.g. "@" -> "%40".
  DA_Api_Insecure Insecure TLS. 0: check for cert validity, 1: always accept
 Issues: github.com/TigerP/acme.sh/issues
 '

dnsapi/dns_desec.sh

@@ -4,7 +4,7 @@ dns_desec_info='deSEC.io
 Site: desec.readthedocs.io/en/latest/
 Docs: github.com/acmesh-official/acme.sh/wiki/dnsapi#dns_desec
 Options:
- DDNSS_Token API Token
+ DEDYN_TOKEN API Token
 Issues: github.com/acmesh-official/acme.sh/issues/2180
 Author: Zheng Qian
 '
@@ -39,6 +39,7 @@ dns_desec_add() {
     _err "invalid domain"
     return 1
   fi
+  _sub_domain=$(echo "$_sub_domain" | _lower_case)
   _debug _sub_domain "$_sub_domain"
   _debug _domain "$_domain"
 
@@ -48,7 +49,7 @@ dns_desec_add() {
   _desec_rest GET "$REST_API/$_domain/rrsets/$_sub_domain/TXT/"
 
   if [ "$_code" = "200" ]; then
-    oldtxtvalues="$(echo "$response" | _egrep_o "\"records\":\\[\"\\S*\"\\]" | cut -d : -f 2 | tr -d "[]\\\\\"" | sed "s/,/ /g")"
+    oldtxtvalues="$(echo "$response" | _egrep_o "\"records\":\\[\"[^ ]*\"\\]" | cut -d : -f 2 | tr -d "[]\\\\\"" | sed "s/,/ /g")"
     _debug "existing TXT found"
     _debug oldtxtvalues "$oldtxtvalues"
     if [ -n "$oldtxtvalues" ]; then
@@ -100,7 +101,7 @@ dns_desec_rm() {
     _err "invalid domain"
     return 1
   fi
-
+  _sub_domain=$(echo "$_sub_domain" | _lower_case)
   _debug _sub_domain "$_sub_domain"
   _debug _domain "$_domain"
 
@@ -110,7 +111,7 @@ dns_desec_rm() {
   _desec_rest GET "$REST_API/$_domain/rrsets/$_sub_domain/TXT/"
 
   if [ "$_code" = "200" ]; then
-    oldtxtvalues="$(echo "$response" | _egrep_o "\"records\":\\[\"\\S*\"\\]" | cut -d : -f 2 | tr -d "[]\\\\\"" | sed "s/,/ /g")"
+    oldtxtvalues="$(echo "$response" | _egrep_o "\"records\":\\[\"[^ ]*\"\\]" | cut -d : -f 2 | tr -d "[]\\\\\"" | sed "s/,/ /g")"
     _debug "existing TXT found"
     _debug oldtxtvalues "$oldtxtvalues"
     if [ -n "$oldtxtvalues" ]; then
@@ -150,6 +151,8 @@ _desec_rest() {
   if [ "$m" != "GET" ]; then
     _secure_debug2 data "$data"
     response="$(_post "$data" "$ep" "" "$m")"
+    _info "Sleeping 1s to respect deSEC write rate limit"
+    _sleep 1
   else
     response="$(_get "$ep")"
   fi

dnsapi/dns_dnsexit.sh

@@ -5,14 +5,11 @@ Site: DNSExit.com
 Docs: github.com/acmesh-official/acme.sh/wiki/dnsapi2#dns_dnsexit
 Options:
  DNSEXIT_API_KEY API Key
- DNSEXIT_AUTH_USER Username
- DNSEXIT_AUTH_PASS Password
 Issues: github.com/acmesh-official/acme.sh/issues/4719
 Author: Samuel Jimenez
 '
 
 DNSEXIT_API_URL="https://api.dnsexit.com/dns/"
-DNSEXIT_HOSTS_URL="https://update.dnsexit.com/ipupdate/hosts.jsp"
 
 ########  Public functions #####################
 #Usage: dns_dnsexit_add   _acme-challenge.*.domain.com   "XKrxpRBosdIKFzxW_CT3KLZNf6q0HG9i01zxXp5CPBs"
@@ -28,20 +25,7 @@ dns_dnsexit_add() {
     return 1
   fi
 
-  _debug 'First detect the root zone'
-  if ! _get_root "$fulldomain"; then
-    return 1
-  fi
-  _debug _sub_domain "$_sub_domain"
-  _debug _domain "$_domain"
-
-  if ! _dnsexit_rest "{\"domain\":\"$_domain\",\"add\":{\"type\":\"TXT\",\"name\":\"$_sub_domain\",\"content\":\"$txtvalue\",\"ttl\":0,\"overwrite\":false}}"; then
-    _err "$response"
-    return 1
-  fi
-
-  _debug2 _response "$response"
-  return 0
+  _dnsexit_zone_op add ',"ttl":1,"overwrite":false'
 }
 
 #Usage: fulldomain txtvalue
@@ -58,54 +42,43 @@ dns_dnsexit_rm() {
     return 1
   fi
 
-  _debug 'First detect the root zone'
-  if ! _get_root "$fulldomain"; then
-    _err "$response"
-    return 1
-  fi
-  _debug _sub_domain "$_sub_domain"
-  _debug _domain "$_domain"
-
-  if ! _dnsexit_rest "{\"domain\":\"$_domain\",\"delete\":{\"type\":\"TXT\",\"name\":\"$_sub_domain\",\"content\":\"$txtvalue\"}}"; then
-    _err "$response"
-    return 1
-  fi
-
-  _debug2 _response "$response"
-  return 0
+  _dnsexit_zone_op delete ''
 }
 
 ####################  Private functions below ##################################
-#_acme-challenge.www.domain.com
-#returns
-# _sub_domain=_acme-challenge.www
-# _domain=domain.com
-_get_root() {
-  domain=$1
+# The legacy zone-detection endpoint (update.dnsexit.com/ipupdate/hosts.jsp)
+# was shut down by DNSExit and now returns 503, and the JSON API offers no
+# zone-list call. So find the root zone by attempting the actual operation at
+# each domain level: the API answers "code":0 only when the domain matches a
+# zone of the account. https://github.com/acmesh-official/acme.sh/issues/6914
+#Usage: _dnsexit_zone_op <add|delete> <extra-json-fields>
+_dnsexit_zone_op() {
+  _op="$1"
+  _extra="$2"
   i=1
   while true; do
-    _domain=$(printf "%s" "$domain" | cut -d . -f "$i"-100)
-    _debug h "$_domain"
+    _domain=$(printf "%s" "$fulldomain" | cut -d . -f "$i"-100)
+    _debug _domain "$_domain"
     if [ -z "$_domain" ]; then
+      _err "Could not find the root zone of $fulldomain in your DNSExit account"
       return 1
     fi
 
-    _debug login "$DNSEXIT_AUTH_USER"
-    _debug password "$DNSEXIT_AUTH_PASS"
-    _debug domain "$_domain"
+    _sub_domain="$(printf "%s" "$fulldomain" | sed "s/\\.$_domain\$//")"
+    if [ "$_sub_domain" = "$fulldomain" ]; then
+      _sub_domain=""
+    fi
+    _debug _sub_domain "$_sub_domain"
 
-    _dnsexit_http "login=$DNSEXIT_AUTH_USER&password=$DNSEXIT_AUTH_PASS&domain=$_domain"
-
-    if _contains "$response" "0=$_domain"; then
-      _sub_domain="$(echo "$fulldomain" | sed "s/\\.$_domain\$//")"
-      return 0
-    else
-      _debug "Go to next level of $_domain"
+    if _dnsexit_rest "{\"domain\":\"$_domain\",\"$_op\":{\"type\":\"TXT\",\"name\":\"$_sub_domain\",\"content\":\"$txtvalue\"$_extra}}"; then
+      if _contains "$response" "\"code\":0" || _contains "$response" "\"code\": 0"; then
+        _debug2 _response "$response"
+        return 0
+      fi
+      _debug "Zone $_domain was not accepted, trying the next level" "$response"
     fi
     i=$(_math "$i" + 1)
   done
-
-  return 1
 }
 
 _dnsexit_rest() {
@@ -136,27 +109,7 @@ _dnsexit_rest() {
   return 0
 }
 
-_dnsexit_http() {
-  m=GET
-  param="$1"
-  _debug param "$param"
-  _debug get "$DNSEXIT_HOSTS_URL?$param"
-
-  response="$(_get "$DNSEXIT_HOSTS_URL?$param")"
-
-  _debug response "$response"
-
-  if [ "$?" != "0" ]; then
-    _err "Error $param"
-    return 1
-  fi
-
-  _debug2 response "$response"
-  return 0
-}
-
 get_account_info() {
-
   DNSEXIT_API_KEY="${DNSEXIT_API_KEY:-$(_readaccountconf_mutable DNSEXIT_API_KEY)}"
   if test -z "$DNSEXIT_API_KEY"; then
     DNSEXIT_API_KEY=''
@@ -166,23 +119,5 @@ get_account_info() {
 
   _saveaccountconf_mutable DNSEXIT_API_KEY "$DNSEXIT_API_KEY"
 
-  DNSEXIT_AUTH_USER="${DNSEXIT_AUTH_USER:-$(_readaccountconf_mutable DNSEXIT_AUTH_USER)}"
-  if test -z "$DNSEXIT_AUTH_USER"; then
-    DNSEXIT_AUTH_USER=""
-    _err 'DNSEXIT_AUTH_USER was not exported'
-    return 1
-  fi
-
-  _saveaccountconf_mutable DNSEXIT_AUTH_USER "$DNSEXIT_AUTH_USER"
-
-  DNSEXIT_AUTH_PASS="${DNSEXIT_AUTH_PASS:-$(_readaccountconf_mutable DNSEXIT_AUTH_PASS)}"
-  if test -z "$DNSEXIT_AUTH_PASS"; then
-    DNSEXIT_AUTH_PASS=""
-    _err 'DNSEXIT_AUTH_PASS was not exported'
-    return 1
-  fi
-
-  _saveaccountconf_mutable DNSEXIT_AUTH_PASS "$DNSEXIT_AUTH_PASS"
-
   return 0
 }

dnsapi/dns_dnsimple.sh

@@ -5,6 +5,7 @@ Site: DNSimple.com
 Docs: github.com/acmesh-official/acme.sh/wiki/dnsapi#dns_dnsimple
 Options:
  DNSimple_OAUTH_TOKEN OAuth Token
+ DNSimple_ACCOUNT_ID Account ID. Optional, only needed when the token can access multiple accounts.
 Issues: github.com/pho3nixf1re/acme.sh/issues
 '
 
@@ -17,6 +18,7 @@ dns_dnsimple_add() {
   fulldomain=$1
   txtvalue=$2
 
+  DNSimple_OAUTH_TOKEN="${DNSimple_OAUTH_TOKEN:-$(_readaccountconf_mutable DNSimple_OAUTH_TOKEN)}"
   if [ -z "$DNSimple_OAUTH_TOKEN" ]; then
     DNSimple_OAUTH_TOKEN=""
     _err "You have not set the dnsimple oauth token yet."
@@ -25,10 +27,10 @@ dns_dnsimple_add() {
   fi
 
   # save the oauth token for later
-  _saveaccountconf DNSimple_OAUTH_TOKEN "$DNSimple_OAUTH_TOKEN"
+  _saveaccountconf_mutable DNSimple_OAUTH_TOKEN "$DNSimple_OAUTH_TOKEN"
 
   if ! _get_account_id; then
-    _err "failed to retrive account id"
+    _err "failed to retrieve account id"
     return 1
   fi
 
@@ -56,8 +58,14 @@ dns_dnsimple_add() {
 dns_dnsimple_rm() {
   fulldomain=$1
 
+  DNSimple_OAUTH_TOKEN="${DNSimple_OAUTH_TOKEN:-$(_readaccountconf_mutable DNSimple_OAUTH_TOKEN)}"
+  if [ -z "$DNSimple_OAUTH_TOKEN" ]; then
+    _err "You have not set the dnsimple oauth token yet."
+    return 1
+  fi
+
   if ! _get_account_id; then
-    _err "failed to retrive account id"
+    _err "failed to retrieve account id"
     return 1
   fi
 
@@ -122,13 +130,16 @@ _get_root() {
 
 # returns _account_id
 _get_account_id() {
-  _debug "retrive account id"
-  if ! _dnsimple_rest GET "whoami"; then
-    return 1
+  DNSimple_ACCOUNT_ID="${DNSimple_ACCOUNT_ID:-$(_readaccountconf_mutable DNSimple_ACCOUNT_ID)}"
+  if [ "$DNSimple_ACCOUNT_ID" ]; then
+    _saveaccountconf_mutable DNSimple_ACCOUNT_ID "$DNSimple_ACCOUNT_ID"
+    _account_id="$DNSimple_ACCOUNT_ID"
+    _debug _account_id "$_account_id"
+    return 0
   fi
 
-  if _contains "$response" "\"account\":null"; then
-    _err "no account associated with this token"
+  _debug "retrieve account id"
+  if ! _dnsimple_rest GET "whoami"; then
     return 1
   fi
 
@@ -137,7 +148,25 @@ _get_account_id() {
     return 1
   fi
 
+  if _contains "$response" "\"account\":null"; then
+    # the whoami of a user token (dnsimple_u_*) carries no account,
+    # so list the accounts the token can access instead
+    # https://github.com/acmesh-official/acme.sh/issues/6491
+    if ! _dnsimple_rest GET "accounts"; then
+      return 1
+    fi
+  fi
+
   _account_id=$(printf "%s" "$response" | _egrep_o "\"id\":[^,]*,\"email\":" | cut -d: -f2 | cut -d, -f1)
+  if [ -z "$_account_id" ]; then
+    _err "no account associated with this token"
+    return 1
+  fi
+  if [ "$(echo "$_account_id" | wc -l)" -gt 1 ]; then
+    _err "The token has access to multiple accounts, please pick one and set it explicitly:"
+    _err "export DNSimple_ACCOUNT_ID=<one of: $(echo "$_account_id" | tr '\n' ' ')>"
+    return 1
+  fi
   _debug _account_id "$_account_id"
 
   return 0

dnsapi/dns_dnsmint.sh

@@ -0,0 +1,243 @@
+#!/usr/bin/env sh
+# shellcheck disable=SC2034
+dns_dnsmint_info='DNSMint.com
+ DNSMint mints hostnames on domains it operates and serves from its own
+ authoritative nameservers, so records are published through its API rather
+ than a zone you run.
+Site: dnsmint.com
+Docs: github.com/acmesh-official/acme.sh/wiki/dnsapi2#dns_dnsmint
+Options:
+ DNSMINT_API_KEY API key. dns01:write is enough to issue certificates.
+Issues: github.com/acmesh-official/acme.sh/issues/7251
+Author: DNSMint
+'
+
+DNSMint_Api="${DNSMint_Api:-https://dnsmint.com/api}"
+
+########  Public functions #####################
+
+#Usage: dns_dnsmint_add _acme-challenge.q7k4m2.example.dev "XKrxpRBosdIKFzxW_CT3KLZNf6q0HG9i01zxXp5CPBs"
+dns_dnsmint_add() {
+  fulldomain=$1
+  txtvalue=$2
+
+  _info "Using DNSMint"
+  _debug fulldomain "$fulldomain"
+  _debug txtvalue "$txtvalue"
+
+  if ! _dnsmint_key; then
+    return 1
+  fi
+
+  # An ACME challenge goes to the DNS-01 endpoint, which derives the hostname
+  # itself and needs only dns01:write. Any other name is an ordinary record
+  # under a hostname, which is a different endpoint and a wider scope.
+  if _startswith "$fulldomain" "_acme-challenge."; then
+    if _dnsmint_challenge present "$fulldomain" "$txtvalue"; then
+      _info "Added, OK"
+      return 0
+    fi
+    return 1
+  fi
+
+  if _dnsmint_record_add "$fulldomain" "$txtvalue"; then
+    _info "Added, OK"
+    return 0
+  fi
+  return 1
+}
+
+#Usage: dns_dnsmint_rm _acme-challenge.q7k4m2.example.dev "XKrxpRBosdIKFzxW_CT3KLZNf6q0HG9i01zxXp5CPBs"
+dns_dnsmint_rm() {
+  fulldomain=$1
+  txtvalue=$2
+
+  _info "Using DNSMint"
+  _debug fulldomain "$fulldomain"
+  _debug txtvalue "$txtvalue"
+
+  if ! _dnsmint_key; then
+    return 1
+  fi
+
+  if _startswith "$fulldomain" "_acme-challenge."; then
+    if _dnsmint_challenge cleanup "$fulldomain" "$txtvalue"; then
+      _info "Removed, OK"
+      return 0
+    fi
+    return 1
+  fi
+
+  if _dnsmint_record_rm "$fulldomain" "$txtvalue"; then
+    _info "Removed, OK"
+    return 0
+  fi
+  return 1
+}
+
+####################  Private functions below ##################################
+
+_dnsmint_key() {
+  DNSMINT_API_KEY="${DNSMINT_API_KEY:-$(_readaccountconf_mutable DNSMINT_API_KEY)}"
+  if [ -z "$DNSMINT_API_KEY" ]; then
+    DNSMINT_API_KEY=""
+    _err "You did not specify DNSMINT_API_KEY yet."
+    _err "Create a key with the dns01:write scope at https://dnsmint.com/dashboard"
+    _err "e.g."
+    _err "export DNSMINT_API_KEY=dnsm_xxxxxxxxxxxx_xxxxxxxx"
+    return 1
+  fi
+  _saveaccountconf_mutable DNSMINT_API_KEY "$DNSMINT_API_KEY"
+  return 0
+}
+
+_dnsmint_headers() {
+  export _H1="Authorization: Bearer $DNSMINT_API_KEY"
+  export _H2="Accept: application/json"
+  export _H3="Content-Type: application/json"
+}
+
+# One request. Sets $response and $_code; returns non-zero on a transport error.
+_dnsmint_rest() {
+  _m="$1"
+  _ep="$2"
+  _data="$3"
+
+  _dnsmint_headers
+  if [ "$_m" = "GET" ]; then
+    response="$(_get "$DNSMint_Api$_ep")"
+  else
+    _secure_debug2 _data "$_data"
+    response="$(_post "$_data" "$DNSMint_Api$_ep" "" "$_m")"
+  fi
+  _ret="$?"
+  _code="$(grep "^HTTP" "$HTTP_HEADER" | _tail_n 1 | cut -d " " -f 2 | tr -d "\\r\\n")"
+  _debug "http response code $_code"
+  _debug2 response "$response"
+  if [ "$_ret" != "0" ]; then
+    _err "error $_ep"
+    return 1
+  fi
+  case "$_code" in
+  2*) return 0 ;;
+  *)
+    # The API says why in the body - a key narrowed to another hostname, a
+    # name that is not live - and that is more use than the status alone.
+    _err "error $_ep: HTTP $_code $response"
+    return 1
+    ;;
+  esac
+}
+
+# The DNS-01 endpoint. It derives the hostname from the challenge name, so
+# there is no zone to look up and no record id to track: the value published
+# is the value removed.
+_dnsmint_challenge() {
+  _action="$1"
+  _fqdn="$2"
+  _value="$3"
+  _dnsmint_rest POST "/httpreq/$_action" "{\"fqdn\":\"$_fqdn\",\"value\":\"$_value\"}"
+}
+
+# Everything below here is for names that are not ACME challenges. A record
+# under a hostname is addressed by the hostname's id and a name relative to
+# it, so the hostname has to be found first.
+_dnsmint_host() {
+  _name="$1"
+  _host_id=""
+  _host_sub=""
+
+  if ! _dnsmint_rest GET "/v1/hostnames?limit=500"; then
+    return 1
+  fi
+
+  for _h in $(echo "$response" | _egrep_o '"hostname":"[^"]*"' | cut -d'"' -f4); do
+    case "$_name" in
+    *".$_h")
+      # Longest suffix wins, so a.b.example.dev prefers b.example.dev over
+      # example.dev when both are hostnames on the account.
+      if [ "${#_h}" -gt "${#_host_sub}" ]; then
+        _host_sub="$_h"
+      fi
+      ;;
+    esac
+  done
+
+  if [ -z "$_host_sub" ]; then
+    _err "$_name is not under a hostname on this account"
+    return 1
+  fi
+
+  # The id sits next to the hostname in the same object.
+  _host_id="$(echo "$response" | _egrep_o "\"id\":\"[^\"]*\",\"hostname\":\"$_host_sub\"" | cut -d'"' -f4)"
+  if [ -z "$_host_id" ]; then
+    _err "could not read the id for $_host_sub"
+    return 1
+  fi
+
+  _record_name="${_name%".$_host_sub"}"
+  _debug _host_sub "$_host_sub"
+  _debug _record_name "$_record_name"
+  return 0
+}
+
+_dnsmint_record_add() {
+  _name="$1"
+  _value="$2"
+
+  if ! _dnsmint_host "$_name"; then
+    return 1
+  fi
+  _dnsmint_rest POST "/v1/hostnames/$_host_id/records" \
+    "{\"name\":\"$_record_name\",\"type\":\"TXT\",\"text\":\"$_value\"}"
+}
+
+_dnsmint_record_rm() {
+  _name="$1"
+  _value="$2"
+
+  if ! _dnsmint_host "$_name"; then
+    return 1
+  fi
+  if ! _dnsmint_rest GET "/v1/hostnames/$_host_id/records"; then
+    return 1
+  fi
+
+  # Records come back as {"id":...,"name":"<fqdn>","type":"TXT","ttl":...,
+  # "data":{...,"text":["<value>"]}}. Match on the value so a name holding
+  # several TXT records loses only the one that was added.
+  #
+  # The replacement carries a literal newline: "\n" there is a GNU extension
+  # and BSD sed inserts the letter n, which would leave the whole reply on one
+  # line and match the first record under the hostname whatever its value.
+  #
+  # echo rather than printf "%s": the reply arrives with no trailing newline,
+  # and Solaris /usr/bin/sed discards an incomplete final line. Here that line
+  # is the entire reply, so every removal would report the record already gone.
+  _records="$(
+    echo "$response" | sed 's/},{/}\
+{/g'
+  )"
+
+  _rid=""
+  while IFS= read -r _line; do
+    case "$_line" in
+    *"\"$_value\""*)
+      # _head_n 1 because a record object may carry a nested id under "data",
+      # and two lines in _rid would break the DELETE URL.
+      _rid="$(echo "$_line" | _egrep_o '"id":"[^"]*"' | cut -d'"' -f4 | _head_n 1)"
+      if [ -n "$_rid" ]; then
+        break
+      fi
+      ;;
+    esac
+  done <<EOF
+$_records
+EOF
+
+  if [ -z "$_rid" ]; then
+    _info "Record already gone, nothing to remove"
+    return 0
+  fi
+  _dnsmint_rest DELETE "/v1/hostnames/$_host_id/records/$_rid" ""
+}

dnsapi/dns_dynu.sh

@@ -23,6 +23,8 @@ dns_dynu_add() {
   fulldomain=$1
   txtvalue=$2
 
+  Dynu_ClientId="${Dynu_ClientId:-$(_readaccountconf_mutable Dynu_ClientId)}"
+  Dynu_Secret="${Dynu_Secret:-$(_readaccountconf_mutable Dynu_Secret)}"
   if [ -z "$Dynu_ClientId" ] || [ -z "$Dynu_Secret" ]; then
     Dynu_ClientId=""
     Dynu_Secret=""
@@ -32,8 +34,8 @@ dns_dynu_add() {
   fi
 
   #save the client id and secret to the account conf file.
-  _saveaccountconf Dynu_ClientId "$Dynu_ClientId"
-  _saveaccountconf Dynu_Secret "$Dynu_Secret"
+  _saveaccountconf_mutable Dynu_ClientId "$Dynu_ClientId"
+  _saveaccountconf_mutable Dynu_Secret "$Dynu_Secret"
 
   if [ -z "$Dynu_Token" ]; then
     _info "Getting Dynu token."
@@ -69,6 +71,8 @@ dns_dynu_rm() {
   fulldomain=$1
   txtvalue=$2
 
+  Dynu_ClientId="${Dynu_ClientId:-$(_readaccountconf_mutable Dynu_ClientId)}"
+  Dynu_Secret="${Dynu_Secret:-$(_readaccountconf_mutable Dynu_Secret)}"
   if [ -z "$Dynu_ClientId" ] || [ -z "$Dynu_Secret" ]; then
     Dynu_ClientId=""
     Dynu_Secret=""
@@ -78,8 +82,8 @@ dns_dynu_rm() {
   fi
 
   #save the client id and secret to the account conf file.
-  _saveaccountconf Dynu_ClientId "$Dynu_ClientId"
-  _saveaccountconf Dynu_Secret "$Dynu_Secret"
+  _saveaccountconf_mutable Dynu_ClientId "$Dynu_ClientId"
+  _saveaccountconf_mutable Dynu_Secret "$Dynu_Secret"
 
   if [ -z "$Dynu_Token" ]; then
     _info "Getting Dynu token."
@@ -214,11 +218,11 @@ _dynu_authentication() {
 
   response="$(_get "$Dynu_EndPoint/oauth2/token")"
   if [ "$?" != "0" ]; then
-    _err "Authentication failed."
+    _err "Authentication failed: no response from $Dynu_EndPoint/oauth2/token"
     return 1
   fi
   if _contains "$response" "Authentication Exception"; then
-    _err "Authentication failed."
+    _err "Authentication failed. Server response: $response"
     return 1
   fi
   if _contains "$response" "access_token"; then

dnsapi/dns_dynv6.sh

@@ -150,6 +150,9 @@ _dns_dynv6_add_http() {
   fi
   _get_zone_name "$_zone_id"
   record=${fulldomain%%."$_zone_name"}
+  if [ "$fulldomain" = "$_zone_name" ]; then
+    record=""
+  fi
   _set_record TXT "$record" "$txtvalue"
   if _contains "$response" "$txtvalue"; then
     _info "Successfully added record"
@@ -168,6 +171,9 @@ _dns_dynv6_rm_http() {
   fi
   _get_zone_name "$_zone_id"
   record=${fulldomain%%."$_zone_name"}
+  if [ "$fulldomain" = "$_zone_name" ]; then
+    record=""
+  fi
   _get_record_id "$_zone_id" "$record" "$txtvalue"
   _del_record "$_zone_id" "$_record_id"
   if [ -z "$response" ]; then

dnsapi/dns_easydns.sh

@@ -75,6 +75,11 @@ dns_easydns_rm() {
   EASYDNS_Token="${EASYDNS_Token:-$(_readaccountconf_mutable EASYDNS_Token)}"
   EASYDNS_Key="${EASYDNS_Key:-$(_readaccountconf_mutable EASYDNS_Key)}"
 
+  if [ -z "$EASYDNS_Token" ] || [ -z "$EASYDNS_Key" ]; then
+    _err "You didn't specify an easydns.net token or api key. Signup at https://cp.easydns.com/manage/security/api/signup.php"
+    return 1
+  fi
+
   _debug "First detect the root zone"
   if ! _get_root "$fulldomain"; then
     _err "invalid domain"
@@ -91,24 +96,21 @@ dns_easydns_rm() {
     return 1
   fi
 
-  count=$(printf "%s\n" "$response" | _egrep_o "\"count\":[^,]*" | cut -d : -f 2)
-  _debug count "$count"
-  if [ "$count" = "0" ]; then
+  record_id=$(printf "%s\n" "$response" | tr '{' '\n' | grep "\"rdata\":\"$txtvalue\"" | _egrep_o "\"id\":\"[^\"]*\"" | cut -d : -f 2 | tr -d \")
+  _debug "record_id" "$record_id"
+
+  if [ -z "$record_id" ]; then
     _info "Don't need to remove."
-  else
-    record_id=$(printf "%s\n" "$response" | _egrep_o "\"id\":\"[^\"]*\"" | cut -d : -f 2 | tr -d \" | head -n 1)
-    _debug "record_id" "$record_id"
-    if [ -z "$record_id" ]; then
-      _err "Can not get record id to remove."
-      return 1
-    fi
-    if ! _EASYDNS_rest DELETE "zones/records/$_domain/$record_id"; then
-      _err "Delete record error."
-      return 1
-    fi
-    _contains "$response" "\"status\":200"
+    return 0
   fi
 
+  if ! _EASYDNS_rest DELETE "zones/records/$_domain/$record_id"; then
+    _err "Delete record error."
+    return 1
+  fi
+
+  _contains "$response" "\"status\":200"
+
 }
 
 ####################  Private functions below ##################################

dnsapi/dns_edgedns.sh

@@ -363,17 +363,12 @@ _edgedns_rest() {
 
 _edgedns_eg_timestamp() {
   _debug "Generating signature Timestamp"
-  _debug3 "Retriving ntp time"
-  _timeheaders="$(_get "https://www.ntp.org" "onlyheader")"
-  _debug3 "_timeheaders" "$_timeheaders"
-  _ntpdate="$(echo "$_timeheaders" | grep -i "Date:" | _head_n 1 | cut -d ':' -f 2- | tr -d "\r\n")"
-  _debug3 "_ntpdate" "$_ntpdate"
-  _ntpdate="$(echo "${_ntpdate}" | sed -e 's/^[[:space:]]*//')"
-  _debug3 "_NTPDATE" "$_ntpdate"
-  _ntptime="$(echo "${_ntpdate}" | _head_n 1 | cut -d " " -f 5 | tr -d "\r\n")"
-  _debug3 "_ntptime" "$_ntptime"
-  _eg_timestamp=$(date -u "+%Y%m%dT")
-  _eg_timestamp="$(printf "%s%s+0000" "$_eg_timestamp" "$_ntptime")"
+  #Akamai accepts a clock skew of +/-30s, so use the system clock directly.
+  #The previous code fetched the Date header from www.ntp.org, which is not
+  #a reliable time source (it served a wrong time for hours, issue 3973),
+  #cost an extra https round-trip for every API request, and combined the
+  #remote time of day with the LOCAL date, breaking around UTC midnight.
+  _eg_timestamp="$(date -u "+%Y%m%dT%H:%M:%S+0000")"
   _debug "_eg_timestamp" "$_eg_timestamp"
 }
 

dnsapi/dns_eurodns.sh

@@ -0,0 +1,267 @@
+#!/usr/bin/env sh
+# shellcheck disable=SC2034
+dns_eurodns_info='EuroDNS
+Site: eurodns.com
+Docs: github.com/acmesh-official/acme.sh/wiki/dnsapi2#dns_eurodns
+Options:
+ EURODNS_APP_ID Application ID
+ EURODNS_API_KEY API Key
+ EURODNS_TTL TTL. Default: "600".
+Issues: github.com/acmesh-official/acme.sh/issues
+Author: Nicolas Santorelli
+'
+
+#
+# EuroDNS DNS API
+#
+# EuroDNS API documentation:
+# https://docapi.eurodns.com
+#
+# Usage:
+#   export EURODNS_APP_ID="your-app-id"
+#   export EURODNS_API_KEY="your-api-key"
+#   acme.sh --issue --dns dns_eurodns -d example.com -d *.example.com
+#
+# The credentials will be saved in ~/.acme.sh/account.conf
+#
+# Optional:
+#   export EURODNS_API_URL="https://rest-api.eurodns.com"  # Default API URL
+#   export EURODNS_TTL=600  # Default TTL (minimum 600 for EuroDNS)
+#
+
+EURODNS_API_DEFAULT="https://rest-api.eurodns.com"
+EURODNS_TTL_DEFAULT=600
+
+########  Public functions #####################
+
+#Usage: dns_eurodns_add   _acme-challenge.www.domain.com   "XKrxpRBosdIKFzxW_CT3KLZNf6q0HG9i01zxXp5CPBs"
+dns_eurodns_add() {
+  fulldomain="$(echo "$1" | _lower_case)"
+  txtvalue=$2
+
+  _info "Using EuroDNS DNS API"
+  _debug fulldomain "$fulldomain"
+  _debug txtvalue "$txtvalue"
+
+  EURODNS_APP_ID="${EURODNS_APP_ID:-$(_readaccountconf_mutable EURODNS_APP_ID)}"
+  EURODNS_API_KEY="${EURODNS_API_KEY:-$(_readaccountconf_mutable EURODNS_API_KEY)}"
+  EURODNS_API_URL="${EURODNS_API_URL:-$(_readaccountconf_mutable EURODNS_API_URL)}"
+  EURODNS_API_URL="${EURODNS_API_URL:-$EURODNS_API_DEFAULT}"
+  EURODNS_TTL="${EURODNS_TTL:-$(_readaccountconf_mutable EURODNS_TTL)}"
+  EURODNS_TTL="${EURODNS_TTL:-$EURODNS_TTL_DEFAULT}"
+
+  if [ -z "$EURODNS_APP_ID" ] || [ -z "$EURODNS_API_KEY" ]; then
+    EURODNS_APP_ID=""
+    EURODNS_API_KEY=""
+    _err "You didn't specify EuroDNS App ID and API Key."
+    _err "Please export EURODNS_APP_ID and EURODNS_API_KEY and try again."
+    return 1
+  fi
+
+  _saveaccountconf_mutable EURODNS_APP_ID "$EURODNS_APP_ID"
+  _saveaccountconf_mutable EURODNS_API_KEY "$EURODNS_API_KEY"
+  if [ "$EURODNS_API_URL" != "$EURODNS_API_DEFAULT" ]; then
+    _saveaccountconf_mutable EURODNS_API_URL "$EURODNS_API_URL"
+  fi
+  if [ "$EURODNS_TTL" != "$EURODNS_TTL_DEFAULT" ]; then
+    _saveaccountconf_mutable EURODNS_TTL "$EURODNS_TTL"
+  fi
+
+  _debug "First detect the root zone"
+  if ! _get_root "$fulldomain"; then
+    _err "Invalid domain"
+    return 1
+  fi
+  _debug _domain "$_domain"
+  _debug _sub_domain "$_sub_domain"
+
+  _info "Adding TXT record"
+  if _eurodns_add_txt_record "$_domain" "$_sub_domain" "$txtvalue"; then
+    _info "Added TXT record successfully."
+    return 0
+  else
+    _err "Failed to add TXT record."
+    return 1
+  fi
+}
+
+#Usage: fulldomain txtvalue
+dns_eurodns_rm() {
+  fulldomain="$(echo "$1" | _lower_case)"
+  txtvalue=$2
+
+  _info "Using EuroDNS DNS API"
+  _debug fulldomain "$fulldomain"
+  _debug txtvalue "$txtvalue"
+
+  EURODNS_APP_ID="${EURODNS_APP_ID:-$(_readaccountconf_mutable EURODNS_APP_ID)}"
+  EURODNS_API_KEY="${EURODNS_API_KEY:-$(_readaccountconf_mutable EURODNS_API_KEY)}"
+  EURODNS_API_URL="${EURODNS_API_URL:-$(_readaccountconf_mutable EURODNS_API_URL)}"
+  EURODNS_API_URL="${EURODNS_API_URL:-$EURODNS_API_DEFAULT}"
+
+  if [ -z "$EURODNS_APP_ID" ] || [ -z "$EURODNS_API_KEY" ]; then
+    EURODNS_APP_ID=""
+    EURODNS_API_KEY=""
+    _err "You didn't specify EuroDNS App ID and API Key."
+    return 1
+  fi
+
+  _debug "First detect the root zone"
+  if ! _get_root "$fulldomain"; then
+    _err "Invalid domain"
+    return 1
+  fi
+  _debug _domain "$_domain"
+  _debug _sub_domain "$_sub_domain"
+
+  _info "Removing TXT record"
+  if _eurodns_rm_txt_record "$_domain" "$_sub_domain" "$txtvalue"; then
+    _info "Removed TXT record successfully."
+    return 0
+  else
+    _err "Failed to remove TXT record."
+    return 1
+  fi
+}
+
+####################  Private functions below ##################################
+
+# _sub_domain=_acme-challenge.www
+# _domain=domain.com
+_get_root() {
+  domain=$1
+  i=1
+  p=1
+
+  while true; do
+    h=$(printf "%s" "$domain" | cut -d . -f "$i"-100)
+    _debug h "$h"
+    if [ -z "$h" ]; then
+      return 1
+    fi
+
+    _eurodns_rest GET "dns-zones/$h"
+    if [ "$?" != "0" ]; then
+      if [ "$_code" = "404" ]; then
+        _debug "Zone $h not found, continuing..."
+      else
+        _err "API error looking up zone $h"
+        return 1
+      fi
+      p=$i
+      i=$(_math "$i" + 1)
+      continue
+    fi
+
+    if _contains "$response" '"name"'; then
+      if [ "$i" = "1" ]; then
+        _sub_domain="@"
+      else
+        _sub_domain=$(printf "%s" "$domain" | cut -d . -f 1-"$p")
+      fi
+      _domain=$h
+      return 0
+    fi
+
+    p=$i
+    i=$(_math "$i" + 1)
+  done
+
+  return 1
+}
+
+_eurodns_add_txt_record() {
+  domain=$1
+  subdomain=$2
+  txtvalue=$3
+
+  data='[{"type":"TXT","host":"'"$subdomain"'","rdata":"'"$txtvalue"'","ttl":'"$EURODNS_TTL"'}]'
+
+  _debug "Adding TXT record via API"
+  if _eurodns_rest POST "dns-zones/$domain/dns-records" "$data"; then
+    if _contains "$response" "$txtvalue"; then
+      return 0
+    fi
+  fi
+  _err "Failed to add TXT record"
+  return 1
+}
+
+_eurodns_rm_txt_record() {
+  domain=$1
+  subdomain=$2
+  txtvalue=$3
+
+  _debug "Getting current zone data for $domain"
+
+  if ! _eurodns_rest GET "dns-zones/$domain"; then
+    _err "Failed to get zone data"
+    return 1
+  fi
+
+  zone_data=$(echo "$response" | _normalizeJson)
+  _debug2 zone_data "$zone_data"
+
+  # Find the record ID matching our TXT record
+  record_id=$(echo "$zone_data" | tr '{' '\n' | grep -F '"TXT"' | grep -F "\"$subdomain\"" | grep -F "\"$txtvalue\"" | _egrep_o '"id" *: *[0-9]+' | cut -d : -f 2 | _head_n 1)
+  _debug record_id "$record_id"
+
+  if [ -z "$record_id" ]; then
+    _info "TXT record not found or already removed"
+    return 0
+  fi
+
+  _debug "Deleting TXT record $record_id"
+  if ! _eurodns_rest DELETE "dns-zones/$domain/dns-records/$record_id"; then
+    _err "Failed to delete TXT record"
+    return 1
+  fi
+
+  return 0
+}
+
+# Usage: _eurodns_rest METHOD ENDPOINT [DATA]
+_eurodns_rest() {
+  method=$1
+  endpoint=$2
+  data="$3"
+
+  export _H1="X-APP-ID: $EURODNS_APP_ID"
+  export _H2="X-API-KEY: $EURODNS_API_KEY"
+  export _H3="Content-Type: application/json"
+
+  url="$EURODNS_API_URL/$endpoint"
+
+  _debug2 url "$url"
+  _debug2 method "$method"
+  _debug2 data "$data"
+
+  : >"$HTTP_HEADER"
+
+  if [ "$method" = "GET" ]; then
+    response="$(_get "$url")"
+  else
+    response="$(_post "$data" "$url" "" "$method")"
+  fi
+
+  _ret="$?"
+  unset _H1 _H2 _H3
+  _debug2 response "$response"
+
+  _code="$(grep "^HTTP" "$HTTP_HEADER" | _tail_n 1 | cut -d " " -f 2 | tr -d "\\r\\n")"
+  _debug2 _code "$_code"
+
+  if [ "$_ret" != "0" ]; then
+    _err "Error calling API: $endpoint"
+    return 1
+  fi
+
+  if [ "$_code" != "200" ] && [ "$_code" != "201" ] && [ "$_code" != "204" ]; then
+    if [ "$_code" != "404" ]; then
+      _err "API error (HTTP $_code): $response"
+    fi
+    return 1
+  fi
+
+  return 0
+}

dnsapi/dns_firestorm.sh

@@ -0,0 +1,110 @@
+#!/usr/bin/env sh
+# shellcheck disable=SC2034
+dns_firestorm_info='Firestorm.ch
+Site: firestorm.ch
+Docs: github.com/acmesh-official/acme.sh/wiki/dnsapi2#dns_firestorm
+Options:
+ FST_Key Customer ID
+ FST_Secret API Secret
+ FST_Url API URL. Optional. Default "https://api.firestorm.ch/acme-dns".
+Issues: github.com/acmesh-official/acme.sh/issues/6839
+Author: FireStorm GmbH
+'
+
+FST_Url_DEFAULT="https://api.firestorm.ch/acme-dns"
+
+########  Public functions #####################
+
+# Usage: dns_firestorm_add _acme-challenge.www.example.com "XKrxpRBosdIKFzxW_CT3KLZNf6q0HG9i01zxXp5CPBs"
+dns_firestorm_add() {
+  fulldomain=$1
+  txtvalue=$2
+
+  FST_Key="${FST_Key:-$(_readaccountconf_mutable FST_Key)}"
+  FST_Secret="${FST_Secret:-$(_readaccountconf_mutable FST_Secret)}"
+  FST_Url="${FST_Url:-$(_readaccountconf_mutable FST_Url)}"
+
+  if [ -z "$FST_Key" ] || [ -z "$FST_Secret" ]; then
+    _err "FST_Key and FST_Secret must be set"
+    _err "Get your API credentials at https://admin.firestorm.ch"
+    return 1
+  fi
+
+  FST_Url="${FST_Url:-$FST_Url_DEFAULT}"
+
+  _saveaccountconf_mutable FST_Key "$FST_Key"
+  _saveaccountconf_mutable FST_Secret "$FST_Secret"
+  if [ "$FST_Url" != "$FST_Url_DEFAULT" ]; then
+    _saveaccountconf_mutable FST_Url "$FST_Url"
+  else
+    _clearaccountconf_mutable FST_Url
+  fi
+
+  subdomain=$(printf "%s" "$fulldomain" | sed 's/^_acme-challenge\.//')
+
+  _info "Adding TXT record for $fulldomain"
+  _debug "Subdomain" "$subdomain"
+  _debug "TXT value" "$txtvalue"
+
+  body="{\"subdomain\":\"$(_json_safe "$subdomain")\",\"txt\":\"$(_json_safe "$txtvalue")\"}"
+
+  response="$(_firestorm_api "update" "$body")"
+
+  if _contains "$response" "$txtvalue"; then
+    _info "TXT record added successfully"
+    return 0
+  fi
+
+  _err "Failed to add TXT record: $response"
+  return 1
+}
+
+# Usage: dns_firestorm_rm _acme-challenge.www.example.com "XKrxpRBosdIKFzxW_CT3KLZNf6q0HG9i01zxXp5CPBs"
+dns_firestorm_rm() {
+  fulldomain=$1
+  txtvalue=$2
+
+  FST_Key="${FST_Key:-$(_readaccountconf_mutable FST_Key)}"
+  FST_Secret="${FST_Secret:-$(_readaccountconf_mutable FST_Secret)}"
+  FST_Url="${FST_Url:-$(_readaccountconf_mutable FST_Url)}"
+  FST_Url="${FST_Url:-$FST_Url_DEFAULT}"
+
+  if [ -z "$FST_Key" ] || [ -z "$FST_Secret" ]; then
+    _err "FST_Key and FST_Secret must be set"
+    return 1
+  fi
+
+  subdomain=$(printf "%s" "$fulldomain" | sed 's/^_acme-challenge\.//')
+
+  _info "Removing TXT record for $fulldomain"
+
+  body="{\"subdomain\":\"$(_json_safe "$subdomain")\",\"txt\":\"$(_json_safe "$txtvalue")\"}"
+
+  response="$(_firestorm_api "remove" "$body")"
+
+  if _contains "$response" "removed"; then
+    _info "TXT record removed"
+    return 0
+  fi
+
+  _err "Failed to remove TXT record: $response"
+  return 1
+}
+
+####################  Private functions below ##################################
+
+# Escape special characters for safe JSON string interpolation
+_json_safe() {
+  printf '%s' "$1" | sed 's/\\/\\\\/g; s/"/\\"/g'
+}
+
+_firestorm_api() {
+  action=$1
+  data=$2
+
+  export _H1="X-Api-User: $FST_Key"
+  export _H2="X-Api-Key: $FST_Secret"
+  export _H3="Content-Type: application/json"
+
+  _post "$data" "$FST_Url/$action" "" "POST"
+}

dnsapi/dns_freedns.sh

@@ -305,7 +305,7 @@ _freedns_domain_id() {
     fi
 
     domain_id="$(echo "$htmlpage" | tr -d " \t\r\n\v\f" | sed 's/<tr>/@<tr>/g' | tr '@' '\n' |
-      grep "<td>$search_domain</td>\|<td>$search_domain(.*)</td>" |
+      grep -E "<td>$search_domain</td>|<td>$search_domain\(.*\)</td>" |
       sed -n 's/.*\(edit\.php?edit_domain_id=[0-9a-zA-Z]*\).*/\1/p' |
       cut -d = -f 2)"
     # The above beauty extracts domain ID from the html page...

dnsapi/dns_freemyip.sh

@@ -6,7 +6,7 @@ Docs: github.com/acmesh-official/acme.sh/wiki/dnsapi2#dns_freemyip
 Options:
  FREEMYIP_Token API Token
 Issues: github.com/acmesh-official/acme.sh/issues/6247
-Author: Recolic Keghart <root@recolic.net>, @Giova96
+Author: Recolic Keghart <root@recolic.net>, @Giova96, ExtremeFiretop
 '
 
 FREEMYIP_DNS_API="https://freemyip.com/update?"
@@ -68,22 +68,30 @@ dns_freemyip_rm() {
   return $?
 }
 
-################ Private functions below  ################
+################ Private functions below ################
 _get_root() {
   _fmi_d="$1"
 
-  echo "$_fmi_d" | rev | cut -d '.' -f 1-3 | rev
+  echo "$_fmi_d" | sed 's/.*\.\([^.]*\.[^.]*\.[^.]*\)$/\1/'
 }
 
 # There is random failure while calling freemyip API too fast. This function automatically retry until success.
 _freemyip_get_until_ok() {
   _fmi_url="$1"
-  for i in $(seq 1 8); do
-    _debug "HTTP GET freemyip.com API '$_fmi_url', retry $i/8..."
-    _get "$_fmi_url" | tee /dev/fd/2 | grep OK && return 0
+  _fmi_i=1
+  while [ "$_fmi_i" -le 8 ]; do
+    _debug "HTTP GET freemyip.com API '$_fmi_url', retry $_fmi_i/8..."
+    _fmi_response="$(_get "$_fmi_url")"
+    printf '%s\n' "$_fmi_response" >&2
+
+    if _contains "$_fmi_response" "OK"; then
+      return 0
+    fi
+
     _sleep 1 # DO NOT send the request too fast
+    _fmi_i=$((_fmi_i + 1))
   done
-  _err "Failed to request freemyip API: $_fmi_url . Server does not say 'OK'"
+  _err "Failed to request freemyip API. Server does not say 'OK'"
   return 1
 }
 
@@ -93,13 +101,16 @@ _is_root_domain_published() {
   _webroot="$(_get_root "$_fmi_d")"
 
   _info "Verifying '""$_fmi_d""' freemyip webroot (""$_webroot"") is not published yet"
-  for i in $(seq 1 3); do
-    _debug "'$_webroot' ns lookup, retry $i/3..."
+  _fmi_i=1
+  while [ "$_fmi_i" -le 3 ]; do
+    _debug "'$_webroot' ns lookup, retry $_fmi_i/3..."
+
     if [ "$(_ns_lookup "$_fmi_d" TXT)" ]; then
       _debug "'$_webroot' already has a TXT record published!"
       return 0
     fi
     _sleep 10 # Give it some time to propagate the TXT record
+    _fmi_i=$((_fmi_i + 1))
   done
   return 1
 }

dnsapi/dns_gd.sh

@@ -69,7 +69,12 @@ dns_gd_add() {
       return 1
     fi
 
-    if ! _contains "$response" "$txtvalue"; then
+    if _contains "$response" "UNKNOWN_DOMAIN"; then
+      # GoDaddy sometimes returns UNKNOWN_DOMAIN when reading a record back even
+      # though the PUT above succeeded; skip the local readback check and let
+      # acme.sh's own DNS propagation check verify the record was published.
+      _info "GoDaddy API won't allow reading the record back; skipping local verification."
+    elif ! _contains "$response" "$txtvalue"; then
       _err "TXT record '${txtvalue}' for '${fulldomain}', value wasn't set!"
       return 1
     fi
@@ -145,8 +150,8 @@ dns_gd_rm() {
 # _domain=domain.com
 _get_root() {
   domain=$1
-  i=2
-  p=1
+  i=1
+  p=0
   while true; do
     h=$(printf "%s" "$domain" | cut -d . -f "$i"-100)
     if [ -z "$h" ]; then
@@ -154,17 +159,41 @@ _get_root() {
       return 1
     fi
 
-    if ! _gd_rest GET "domains/$h"; then
-      return 1
+    # The record name is whatever precedes the candidate zone. Do not assume
+    # _acme-challenge here: with DNS alias mode it can be any name, and the
+    # record may even sit at the zone apex (name "@").
+    if [ "$p" = "0" ]; then
+      _probe_sub="@"
+    else
+      _probe_sub=$(printf "%s" "$domain" | cut -d . -f 1-"$p")
     fi
 
-    if _contains "$response" '"code":"NOT_FOUND"'; then
-      _debug "$h not found"
-    else
-      _sub_domain=$(printf "%s" "$domain" | cut -d . -f 1-"$p")
+    # Probe with the records endpoint instead of "GET domains/$h": since
+    # 2024-05 GoDaddy rejects the domain details call for accounts with
+    # fewer than 10 domains, while record-level calls keep working.
+    # https://github.com/acmesh-official/acme.sh/issues/4487
+    if ! _gd_rest GET "domains/$h/records/TXT/$_probe_sub"; then
+      return 1
+    fi
+    if _startswith "$response" '\['; then
+      _sub_domain="$_probe_sub"
       _domain="$h"
       return 0
     fi
+
+    # Some accounts get UNKNOWN_DOMAIN when reading records of a valid zone
+    # even though writes succeed (see issue #6517); fall back to the domain
+    # details call for them.
+    if ! _gd_rest GET "domains/$h"; then
+      return 1
+    fi
+    if _contains "$response" '"domainId"'; then
+      _sub_domain="$_probe_sub"
+      _domain="$h"
+      return 0
+    fi
+
+    _debug "$h not found"
     p="$i"
     i=$(_math "$i" + 1)
   done

dnsapi/dns_glesys.sh

@@ -0,0 +1,263 @@
+#!/usr/bin/env sh
+# shellcheck disable=SC2034
+dns_glesys_info='Glesys
+Site: Glesys.se
+Docs: https://github.com/acmesh-official/acme.sh/wiki/dnsapi2#dns_glesys
+Options:
+ GLESYS_API_KEY Generated API key.
+ GLESYS_PROJECT_ID Project ID for the API key (e.g. cl12345).
+ GLESYS_API API endpoint. Default "https://api.glesys.com/domain".
+ GLESYS_TTL TXT record TTL. Default 120.
+Issues: https://github.com/acmesh-official/acme.sh/issues/7057
+Author: Toni Karppi
+'
+
+GLESYS_API_DEFAULT="https://api.glesys.com/domain"
+GLESYS_TTL_DEFAULT="120"
+
+######## Public functions #####################################################
+
+# Usage:
+#   dns_glesys_add _acme-challenge.www.example.com "txt-value"
+dns_glesys_add() {
+  fulldomain="$1"
+  txtvalue="$2"
+
+  _debug fulldomain "$fulldomain"
+  _debug txtvalue "$txtvalue"
+
+  _glesys_init || return 1
+
+  if ! _glesys_get_root "$fulldomain"; then
+    _err "Could not find root zone for $fulldomain"
+    return 1
+  fi
+
+  _debug _domain "$_domain"
+  _debug _sub_domain "$_sub_domain"
+
+  host_value="${_sub_domain:-@}"
+  _debug _host_value "$host_value"
+
+  data="{\"domainname\":\"$_domain\",\"host\":\"$host_value\",\"type\":\"TXT\",\"data\":\"$txtvalue\",\"ttl\":\"$GLESYS_TTL\"}"
+
+  _debug2 data "$data"
+
+  if ! _glesys_rest POST "/addrecord" "$data"; then
+    _err "Failed to send HTTP request to add TXT record"
+    return 1
+  fi
+
+  response_code=$(
+    printf "%s" "$response" |
+      tr -d '\r\n\t ' |
+      _egrep_o '"code":"?[0-9]+' |
+      _egrep_o '[0-9]+$'
+  )
+
+  _debug response_code "$response_code"
+
+  if [ "$response_code" != "200" ]; then
+    _err "GleSYS API responded with an unexpected status when attempting to add TXT record"
+    _debug2 "API response" "$response"
+    return 1
+  fi
+
+  _info "TXT record added"
+
+  return 0
+}
+
+# Usage:
+#   dns_glesys_rm _acme-challenge.www.example.com "txt-value"
+dns_glesys_rm() {
+  fulldomain="$1"
+  txtvalue="$2"
+
+  _debug fulldomain "$fulldomain"
+  _debug txtvalue "$txtvalue"
+
+  _glesys_init || return 1
+
+  if ! _glesys_get_root "$fulldomain"; then
+    _err "Could not find root zone for $fulldomain"
+    return 1
+  fi
+
+  if ! _glesys_find_record_id "$txtvalue"; then
+    _info "TXT record not present, skip removal"
+    return 0
+  fi
+
+  _debug _record_id "$_record_id"
+
+  if ! _glesys_rest POST "/deleterecord" "{\"recordid\":$_record_id}"; then
+    _err "Failed to send HTTP request to remove TXT record"
+    return 1
+  fi
+
+  response_code=$(
+    printf "%s" "$response" |
+      tr -d '\r\n\t ' |
+      _egrep_o '"code":"?[0-9]+' |
+      _egrep_o '[0-9]+$'
+  )
+
+  _debug response_code "$response_code"
+
+  if [ "$response_code" != "200" ]; then
+    _err "GleSYS API responded with unexpected status when attempting to remove TXT record"
+    _debug2 "API response" "$response"
+    return 1
+  fi
+
+  _info "TXT record removed"
+
+  return 0
+}
+
+######## Private functions ####################################################
+
+_glesys_find_record_id() {
+  txtvalue="$1"
+
+  _debug txtvalue "$txtvalue"
+
+  if [ -z "$txtvalue" ]; then
+    return 1
+  fi
+
+  _record_id=""
+
+  _debug "Looking for TXT record with value" "$txtvalue"
+
+  if ! _glesys_rest GET "/listrecords?domainname=$_domain"; then
+    _err "Failed to list DNS records"
+    return 1
+  fi
+
+  records="$(
+    printf "%s" "$response" |
+      tr -d '\r\n\t ' |
+      sed 's/},{/}\
+{/g'
+  )"
+
+  _debug2 records "$records"
+
+  expected_data="\"data\":\"$txtvalue\""
+
+  _record_id="$(
+    printf "%s\n" "$records" |
+      while IFS= read -r record; do
+        printf "%s" "$record" | grep -q '"type":"TXT"' || continue
+        printf "%s" "$record" | grep -Fq "$expected_data" || continue
+
+        printf "%s" "$record" |
+          grep -E -o '"recordid":"?[0-9]+' |
+          grep -E -o '[0-9]+$'
+
+        break
+      done
+  )"
+
+  _debug _record_id "$_record_id"
+
+  if [ -z "$_record_id" ]; then
+    return 1
+  fi
+
+  return 0
+}
+
+# Finds:
+#   _domain     example.com
+#   _sub_domain _acme-challenge.www
+_glesys_get_root() {
+  domain="$1"
+  i=1
+
+  while true; do
+    h="$(printf "%s" "$domain" | cut -d . -f "$i"-100)"
+
+    if [ -z "$h" ]; then
+      return 1
+    fi
+
+    if _glesys_rest GET "/listrecords?domainname=$h"; then
+      response_code=$(
+        printf "%s" "$response" |
+          tr -d '\r\n\t ' |
+          _egrep_o '"code":"?[0-9]+' |
+          _egrep_o '[0-9]+$'
+      )
+
+      _debug response_code "$response_code"
+
+      if [ "$response_code" = "200" ]; then
+        cut_len="$((${#domain} - ${#h} - 1))"
+        _domain="$h"
+        _sub_domain="$(printf "%s" "$domain" | cut -c "1-$cut_len")"
+        return 0
+      fi
+    fi
+
+    i="$((i + 1))"
+  done
+}
+
+_glesys_init() {
+  [ -z "$GLESYS_API" ] && GLESYS_API="$GLESYS_API_DEFAULT"
+  [ -z "$GLESYS_TTL" ] && GLESYS_TTL="$GLESYS_TTL_DEFAULT"
+
+  _debug GLESYS_API "$GLESYS_API"
+  _debug GLESYS_TTL "$GLESYS_TTL"
+
+  GLESYS_API_KEY="${GLESYS_API_KEY:-$(_readaccountconf_mutable GLESYS_API_KEY)}"
+  GLESYS_PROJECT_ID="${GLESYS_PROJECT_ID:-$(_readaccountconf_mutable GLESYS_PROJECT_ID)}"
+
+  if [ -z "$GLESYS_API_KEY" ] || [ -z "$GLESYS_PROJECT_ID" ]; then
+    _err "GLESYS_API_KEY and GLESYS_PROJECT_ID must be set for this provider"
+    return 1
+  fi
+
+  _secure_debug GLESYS_API_KEY "$GLESYS_API_KEY"
+  _secure_debug GLESYS_PROJECT_ID "$GLESYS_PROJECT_ID"
+
+  _glesys_basic_auth="$(printf "%s:%s" "$GLESYS_PROJECT_ID" "$GLESYS_API_KEY" | _base64)"
+  _secure_debug2 _glesys_basic_auth "$_glesys_basic_auth"
+
+  _saveaccountconf_mutable GLESYS_API_KEY "$GLESYS_API_KEY"
+  _saveaccountconf_mutable GLESYS_PROJECT_ID "$GLESYS_PROJECT_ID"
+
+  return 0
+}
+
+_glesys_rest() {
+  method="$1"
+  path="$2"
+  data="$3"
+
+  export _H1="Authorization: Basic $_glesys_basic_auth"
+  export _H2="Content-Type: application/json"
+  export _H3="Accept: application/json"
+
+  url="$GLESYS_API$path"
+  _debug "$method $url"
+
+  if [ "$method" = "GET" ]; then
+    response="$(_get "$url")"
+  else
+    response="$(_post "$data" "$url" "" "$method")"
+  fi
+
+  ret="$?"
+  _debug2 response "$response"
+  _debug ret "$ret"
+
+  if [ "$ret" != "0" ]; then
+    return 1
+  fi
+
+  return 0
+}

dnsapi/dns_hestiacp.sh

@@ -0,0 +1,198 @@
+#!/usr/bin/env sh
+# shellcheck disable=SC2034
+dns_hestiacp_info='HestiaCP Server API
+Site: hestiacp.com
+Docs: github.com/acmesh-official/acme.sh/wiki/dnsapi2#dns_hestiacp
+Options:
+ HESTIA_HOST Panel URL. E.g. "https://panel.example.com:8083"
+ HESTIA_ACCESS API access key
+ HESTIA_SECRET API secret key
+ HESTIA_USER Username owning the DNS zones. Default "admin". Optional.
+Issues: github.com/acmesh-official/acme.sh/issues/6251
+Author: Radu Malica <radu.malica@gmail.com>
+'
+
+########  Public functions #####################
+
+# Usage: dns_hestiacp_add fulldomain txtvalue
+dns_hestiacp_add() {
+  fulldomain=$1
+  txtvalue=$2
+
+  if ! _hestia_init; then
+    return 1
+  fi
+
+  _debug "Detecting the root zone for $fulldomain"
+  if ! _hestia_get_root "$fulldomain"; then
+    _err "Cannot find a DNS zone for $fulldomain under user $HESTIA_USER"
+    return 1
+  fi
+  _debug _hestia_domain "$_hestia_domain"
+  _debug _hestia_sub "$_hestia_sub"
+
+  # _hestia_get_root left the zone record listing in _hestia_response
+  if _hestia_find_records "$_hestia_sub" "TXT" | grep -F -- "$txtvalue" >/dev/null; then
+    _info "The TXT record already exists, skipping"
+    return 0
+  fi
+
+  _info "Adding TXT record for $fulldomain"
+  if ! _hestia_rest "v-add-dns-record" "$HESTIA_USER" "$_hestia_domain" "$_hestia_sub" "TXT" "$txtvalue" "" "" "yes" "600"; then
+    _err "Error adding TXT record: $_hestia_response"
+    return 1
+  fi
+  _info "TXT record added successfully"
+  return 0
+}
+
+# Usage: dns_hestiacp_rm fulldomain txtvalue
+dns_hestiacp_rm() {
+  fulldomain=$1
+  txtvalue=$2
+
+  if ! _hestia_init; then
+    return 1
+  fi
+
+  _debug "Detecting the root zone for $fulldomain"
+  if ! _hestia_get_root "$fulldomain"; then
+    _err "Cannot find a DNS zone for $fulldomain under user $HESTIA_USER"
+    return 1
+  fi
+  _debug _hestia_domain "$_hestia_domain"
+  _debug _hestia_sub "$_hestia_sub"
+
+  _hestia_removed=0
+  _hestia_failed=0
+  while IFS='|' read -r _hestia_id _hestia_value || [ -n "$_hestia_id" ]; do
+    if [ -z "$_hestia_id" ]; then
+      continue
+    fi
+    if ! _contains "$_hestia_value" "$txtvalue"; then
+      continue
+    fi
+    _info "Deleting TXT record $_hestia_id"
+    if ! _hestia_rest "v-delete-dns-record" "$HESTIA_USER" "$_hestia_domain" "$_hestia_id" "yes"; then
+      _err "Error deleting TXT record $_hestia_id: $_hestia_response"
+      _hestia_failed=$(_math "$_hestia_failed" + 1)
+      continue
+    fi
+    _hestia_removed=$(_math "$_hestia_removed" + 1)
+  done <<EOF
+$(_hestia_find_records "$_hestia_sub" "TXT")
+EOF
+
+  if [ "$_hestia_removed" = "0" ] && [ "$_hestia_failed" = "0" ]; then
+    _info "No matching TXT record found to remove"
+  else
+    _info "Removed $_hestia_removed TXT record(s)"
+  fi
+
+  if [ "$_hestia_failed" != "0" ]; then
+    return 1
+  fi
+  return 0
+}
+
+####################  Private functions below ##################################
+
+_hestia_init() {
+  HESTIA_HOST="${HESTIA_HOST:-$(_readaccountconf_mutable HESTIA_HOST)}"
+  HESTIA_ACCESS="${HESTIA_ACCESS:-$(_readaccountconf_mutable HESTIA_ACCESS)}"
+  HESTIA_SECRET="${HESTIA_SECRET:-$(_readaccountconf_mutable HESTIA_SECRET)}"
+  HESTIA_USER="${HESTIA_USER:-$(_readaccountconf_mutable HESTIA_USER)}"
+
+  if [ -z "$HESTIA_HOST" ] || [ -z "$HESTIA_ACCESS" ] || [ -z "$HESTIA_SECRET" ]; then
+    HESTIA_HOST=""
+    HESTIA_ACCESS=""
+    HESTIA_SECRET=""
+    _err "You must export HESTIA_HOST, HESTIA_ACCESS and HESTIA_SECRET first"
+    return 1
+  fi
+
+  HESTIA_HOST="${HESTIA_HOST%/}"
+  if ! echo "$HESTIA_HOST" | grep -qE '^https?://[^/]+$'; then
+    _err "HESTIA_HOST must be a valid URL (e.g. https://panel.example.com:8083)"
+    return 1
+  fi
+
+  if [ -z "$HESTIA_USER" ]; then
+    HESTIA_USER="admin"
+  fi
+
+  _saveaccountconf_mutable HESTIA_HOST "$HESTIA_HOST"
+  _saveaccountconf_mutable HESTIA_ACCESS "$HESTIA_ACCESS"
+  _saveaccountconf_mutable HESTIA_SECRET "$HESTIA_SECRET"
+  _saveaccountconf_mutable HESTIA_USER "$HESTIA_USER"
+  return 0
+}
+
+# Walk up the domain labels until the API returns a DNS zone.
+# Sets _hestia_domain to the zone and _hestia_sub to the record name
+# relative to the zone. The zone record listing stays in _hestia_response.
+_hestia_get_root() {
+  _hestia_fqdn="${1%.}"
+  _hestia_i=1
+  while true; do
+    _hestia_h=$(printf "%s" "$_hestia_fqdn" | cut -d . -f "$_hestia_i"-100)
+    _debug2 _hestia_h "$_hestia_h"
+    if [ -z "$_hestia_h" ]; then
+      return 1
+    fi
+    if _hestia_rest "v-list-dns-records" "$HESTIA_USER" "$_hestia_h" "json"; then
+      _hestia_domain="$_hestia_h"
+      if [ "$_hestia_h" = "$_hestia_fqdn" ]; then
+        _hestia_sub="@"
+      else
+        _hestia_sub=$(printf "%s" "$_hestia_fqdn" | cut -d . -f 1-"$(_math "$_hestia_i" - 1)")
+      fi
+      return 0
+    fi
+    _hestia_i=$(_math "$_hestia_i" + 1)
+  done
+}
+
+# Call the HestiaCP API. Args: cmd [arg1 arg2 ...]
+# The response body is stored in _hestia_response.
+_hestia_rest() {
+  _hestia_cmd=$1
+  shift
+
+  _hestia_data="{\"access_key\":\"$HESTIA_ACCESS\",\"secret_key\":\"$HESTIA_SECRET\",\"cmd\":\"$_hestia_cmd\""
+  _hestia_argn=1
+  for _hestia_arg in "$@"; do
+    _hestia_data="$_hestia_data,\"arg$_hestia_argn\":\"$_hestia_arg\""
+    _hestia_argn=$(_math "$_hestia_argn" + 1)
+  done
+  _hestia_data="$_hestia_data}"
+
+  _debug2 "Calling $_hestia_cmd"
+  _hestia_response=$(_post "$_hestia_data" "$HESTIA_HOST/api/" "" "POST" "application/json")
+  _hestia_ret=$?
+  _debug2 _hestia_response "$_hestia_response"
+  if [ "$_hestia_ret" != "0" ]; then
+    _err "Error connecting to the HestiaCP API"
+    return 1
+  fi
+  if _contains "$_hestia_response" "Error:"; then
+    return 1
+  fi
+  return 0
+}
+
+# Extract records matching name and type from the v-list-dns-records
+# response in _hestia_response. Prints one "id|value" line per match.
+_hestia_find_records() {
+  _hestia_fname=$1
+  _hestia_ftype=$2
+
+  echo "$_hestia_response" | tr -d '\n' | sed 's/},/}\
+/g' | grep -F -- "\"RECORD\": \"$_hestia_fname\"" | grep -F -- "\"TYPE\": \"$_hestia_ftype\"" | while read -r _hestia_line; do
+    _hestia_id=$(echo "$_hestia_line" | _egrep_o '"ID": "[^"]*' | cut -d '"' -f 4)
+    _hestia_value=$(echo "$_hestia_line" | _egrep_o '"VALUE": "[^"]*' | cut -d '"' -f 4)
+    if [ -n "$_hestia_id" ]; then
+      echo "$_hestia_id|$_hestia_value"
+    fi
+  done
+}

dnsapi/dns_hetzner.sh

@@ -1,256 +0,0 @@
-#!/usr/bin/env sh
-# shellcheck disable=SC2034
-dns_hetzner_info='Hetzner.com
-Site: Hetzner.com
-Docs: github.com/acmesh-official/acme.sh/wiki/dnsapi#dns_hetzner
-Options:
- HETZNER_Token API Token
-Issues: github.com/acmesh-official/acme.sh/issues/2943
-'
-
-HETZNER_Api="https://dns.hetzner.com/api/v1"
-
-########  Public functions #####################
-
-# Usage: add  _acme-challenge.www.domain.com   "XKrxpRBosdIKFzxW_CT3KLZNf6q0HG9i01zxXp5CPBs"
-# Used to add txt record
-# Ref: https://dns.hetzner.com/api-docs/
-dns_hetzner_add() {
-  full_domain=$1
-  txt_value=$2
-
-  HETZNER_Token="${HETZNER_Token:-$(_readaccountconf_mutable HETZNER_Token)}"
-
-  if [ -z "$HETZNER_Token" ]; then
-    HETZNER_Token=""
-    _err "You didn't specify a Hetzner api token."
-    _err "You can get yours from here https://dns.hetzner.com/settings/api-token."
-    return 1
-  fi
-
-  #save the api key and email to the account conf file.
-  _saveaccountconf_mutable HETZNER_Token "$HETZNER_Token"
-
-  _debug "First detect the root zone"
-
-  if ! _get_root "$full_domain"; then
-    _err "Invalid domain"
-    return 1
-  fi
-  _debug _domain_id "$_domain_id"
-  _debug _sub_domain "$_sub_domain"
-  _debug _domain "$_domain"
-
-  _debug "Getting TXT records"
-  if ! _find_record "$_sub_domain" "$txt_value"; then
-    return 1
-  fi
-
-  if [ -z "$_record_id" ]; then
-    _info "Adding record"
-    if _hetzner_rest POST "records" "{\"zone_id\":\"${HETZNER_Zone_ID}\",\"type\":\"TXT\",\"name\":\"$_sub_domain\",\"value\":\"$txt_value\",\"ttl\":120}"; then
-      if _contains "$response" "$txt_value"; then
-        _info "Record added, OK"
-        _sleep 2
-        return 0
-      fi
-    fi
-    _err "Add txt record error${_response_error}"
-    return 1
-  else
-    _info "Found record id: $_record_id."
-    _info "Record found, do nothing."
-    return 0
-    # we could modify a record, if the names for txt records for *.example.com and example.com would be not the same
-    #if _hetzner_rest PUT "records/${_record_id}" "{\"zone_id\":\"${HETZNER_Zone_ID}\",\"type\":\"TXT\",\"name\":\"$full_domain\",\"value\":\"$txt_value\",\"ttl\":120}"; then
-    #  if _contains "$response" "$txt_value"; then
-    #    _info "Modified, OK"
-    #    return 0
-    #  fi
-    #fi
-    #_err "Add txt record error (modify)."
-    #return 1
-  fi
-}
-
-# Usage: full_domain txt_value
-# Used to remove the txt record after validation
-dns_hetzner_rm() {
-  full_domain=$1
-  txt_value=$2
-
-  HETZNER_Token="${HETZNER_Token:-$(_readaccountconf_mutable HETZNER_Token)}"
-
-  _debug "First detect the root zone"
-  if ! _get_root "$full_domain"; then
-    _err "Invalid domain"
-    return 1
-  fi
-  _debug _domain_id "$_domain_id"
-  _debug _sub_domain "$_sub_domain"
-  _debug _domain "$_domain"
-
-  _debug "Getting TXT records"
-  if ! _find_record "$_sub_domain" "$txt_value"; then
-    return 1
-  fi
-
-  if [ -z "$_record_id" ]; then
-    _info "Remove not needed. Record not found."
-  else
-    if ! _hetzner_rest DELETE "records/$_record_id"; then
-      _err "Delete record error${_response_error}"
-      return 1
-    fi
-    _sleep 2
-    _info "Record deleted"
-  fi
-}
-
-####################  Private functions below ##################################
-#returns
-# _record_id=a8d58f22d6931bf830eaa0ec6464bf81  if found; or 1 if error
-_find_record() {
-  unset _record_id
-  _record_name=$1
-  _record_value=$2
-
-  if [ -z "$_record_value" ]; then
-    _record_value='[^"]*'
-  fi
-
-  _debug "Getting all records"
-  _hetzner_rest GET "records?zone_id=${_domain_id}"
-
-  if _response_has_error; then
-    _err "Error${_response_error}"
-    return 1
-  else
-    _record_id=$(
-      echo "$response" |
-        grep -o "{[^\{\}]*\"name\":\"$_record_name\"[^\}]*}" |
-        grep "\"value\":\"$_record_value\"" |
-        while read -r record; do
-          # test for type and
-          if [ -n "$(echo "$record" | _egrep_o '"type":"TXT"')" ]; then
-            echo "$record" | _egrep_o '"id":"[^"]*"' | cut -d : -f 2 | tr -d \"
-            break
-          fi
-        done
-    )
-  fi
-}
-
-#_acme-challenge.www.domain.com
-#returns
-# _sub_domain=_acme-challenge.www
-# _domain=domain.com
-# _domain_id=sdjkglgdfewsdfg
-_get_root() {
-  domain=$1
-  i=1
-  p=1
-
-  domain_without_acme=$(echo "$domain" | cut -d . -f 2-)
-  domain_param_name=$(echo "HETZNER_Zone_ID_for_${domain_without_acme}" | sed 's/[\.\-]/_/g')
-
-  _debug "Reading zone_id for '$domain_without_acme' from config..."
-  HETZNER_Zone_ID=$(_readdomainconf "$domain_param_name")
-  if [ "$HETZNER_Zone_ID" ]; then
-    _debug "Found, using: $HETZNER_Zone_ID"
-    if ! _hetzner_rest GET "zones/${HETZNER_Zone_ID}"; then
-      _debug "Zone with id '$HETZNER_Zone_ID' does not exist."
-      _cleardomainconf "$domain_param_name"
-      unset HETZNER_Zone_ID
-    else
-      if _contains "$response" "\"id\":\"$HETZNER_Zone_ID\""; then
-        _domain=$(printf "%s\n" "$response" | _egrep_o '"name":"[^"]*"' | cut -d : -f 2 | tr -d \" | head -n 1)
-        if [ "$_domain" ]; then
-          _cut_length=$((${#domain} - ${#_domain} - 1))
-          _sub_domain=$(printf "%s" "$domain" | cut -c "1-$_cut_length")
-          _domain_id="$HETZNER_Zone_ID"
-          return 0
-        else
-          return 1
-        fi
-      else
-        return 1
-      fi
-    fi
-  fi
-
-  _debug "Trying to get zone id by domain name for '$domain_without_acme'."
-  while true; do
-    h=$(printf "%s" "$domain" | cut -d . -f "$i"-100)
-    if [ -z "$h" ]; then
-      #not valid
-      return 1
-    fi
-    _debug h "$h"
-
-    _hetzner_rest GET "zones?name=$h"
-
-    if _contains "$response" "\"name\":\"$h\"" || _contains "$response" '"total_entries":1'; then
-      _domain_id=$(echo "$response" | _egrep_o "\[.\"id\":\"[^\"]*\"" | _head_n 1 | cut -d : -f 2 | tr -d \")
-      if [ "$_domain_id" ]; then
-        _sub_domain=$(printf "%s" "$domain" | cut -d . -f 1-"$p")
-        _domain=$h
-        HETZNER_Zone_ID=$_domain_id
-        _savedomainconf "$domain_param_name" "$HETZNER_Zone_ID"
-        return 0
-      fi
-      return 1
-    fi
-    p=$i
-    i=$(_math "$i" + 1)
-  done
-  return 1
-}
-
-#returns
-# _response_error
-_response_has_error() {
-  unset _response_error
-
-  err_part="$(echo "$response" | _egrep_o '"error":\{[^\}]*\}')"
-
-  if [ -n "$err_part" ]; then
-    err_code=$(echo "$err_part" | _egrep_o '"code":[0-9]+' | cut -d : -f 2)
-    err_message=$(echo "$err_part" | _egrep_o '"message":"[^"]+"' | cut -d : -f 2 | tr -d \")
-
-    if [ -n "$err_code" ] && [ -n "$err_message" ]; then
-      _response_error=" - message: ${err_message}, code: ${err_code}"
-      return 0
-    fi
-  fi
-
-  return 1
-}
-
-#returns
-# response
-_hetzner_rest() {
-  m=$1
-  ep="$2"
-  data="$3"
-  _debug "$ep"
-
-  key_trimmed=$(echo "$HETZNER_Token" | tr -d \")
-
-  export _H1="Content-TType: application/json"
-  export _H2="Auth-API-Token: $key_trimmed"
-
-  if [ "$m" != "GET" ]; then
-    _debug data "$data"
-    response="$(_post "$data" "$HETZNER_Api/$ep" "" "$m")"
-  else
-    response="$(_get "$HETZNER_Api/$ep")"
-  fi
-
-  if [ "$?" != "0" ] || _response_has_error; then
-    _debug "Error$_response_error"
-    return 1
-  fi
-  _debug2 response "$response"
-  return 0
-}

dnsapi/dns_hostingde.sh

@@ -40,6 +40,11 @@ _hostingde_apiKey() {
     return 1
   fi
 
+  # The endpoint is the base URL only; the api path is appended below.
+  # hosting.de's own docs show the full api URL, so strip it if pasted in.
+  # https://github.com/acmesh-official/acme.sh/issues/6896
+  HOSTINGDE_ENDPOINT="$(echo "$HOSTINGDE_ENDPOINT" | sed 's|/api/dns/v1/json||; s|/*$||')"
+
   _saveaccountconf_mutable HOSTINGDE_APIKEY "$HOSTINGDE_APIKEY"
   _saveaccountconf_mutable HOSTINGDE_ENDPOINT "$HOSTINGDE_ENDPOINT"
 }

dnsapi/dns_hostinger.sh

@@ -0,0 +1,196 @@
+#!/usr/bin/env sh
+# shellcheck disable=SC2034
+dns_hostinger_info='Hostinger
+Site: Hostinger.com
+Domains: hostinger.nl
+Docs: github.com/acmesh-official/acme.sh/wiki/dnsapi2#dns_hostinger
+Options:
+ HOSTINGER_Token API Key
+Issues: https://github.com/acmesh-official/acme.sh/issues/6831
+Author: Sasha Reid <github@sasha.hackl.es>
+'
+
+HOSTINGER_Api="https://developers.hostinger.com/api/dns/v1/zones"
+
+########  Public functions #####################
+
+#Usage: add  _acme-challenge.www.domain.com   "XKrxpRBosdIKFzxW_CT3KLZNf6q0HG9i01zxXp5CPBs"
+dns_hostinger_add() {
+  fulldomain=$1
+  txtvalue=$2
+
+  HOSTINGER_Token="${HOSTINGER_Token:-$(_readaccountconf_mutable HOSTINGER_Token)}"
+
+  if [ -z "$HOSTINGER_Token" ]; then
+    HOSTINGER_Token=""
+    _err "You didn't specify a Hostinger API Key yet."
+    _err "Please read the documentation for the Hostinger API authentication at https://developers.hostinger.com/#description/authentication"
+    return 1
+  fi
+  _saveaccountconf_mutable HOSTINGER_Token "$HOSTINGER_Token"
+
+  _debug "First detect the root zone"
+  if ! _get_root "$fulldomain"; then
+    _err "invalid domain"
+    return 1
+  fi
+  _debug _sub_domain "$_sub_domain"
+  _debug _domain "$_domain"
+
+  _debug "Getting existing records"
+  _hostinger_rest GET "${_domain}"
+
+  if [ -z "$response" ]; then
+    _err "Error"
+    return 1
+  fi
+
+  # For wildcard cert, the main root domain and the wildcard domain have the same txt subdomain name, so
+  # we can not use updating anymore.
+  #  count=$(printf "%s\n" "$response" | _egrep_o "\"count\":[^,]*" | cut -d : -f 2)
+  #  _debug count "$count"
+  #  if [ "$count" = "0" ]; then
+  _info "Adding record"
+  if _hostinger_rest PUT "$_domain" "{\"zone\":[{\"name\": \"$_sub_domain\",\"records\": [{\"content\":\"$txtvalue\"}],\"type\":\"TXT\",\"ttl\":\"120\"}],\"overwrite\":false}"; then
+    if _contains "$response" "Request accepted"; then
+      _info "Added, OK"
+      return 0
+    elif _contains "$response" "DNS resource record is not valid or conflicts with another resource record" ||
+      _contains "$response" 'DNS:4008'; then
+      _info "Already exists, OK"
+      return 0
+    else
+      _err "Add txt record error."
+      return 1
+    fi
+  fi
+  _err "Add txt record error."
+  return 1
+
+}
+
+#fulldomain txtvalue
+dns_hostinger_rm() {
+  fulldomain=$1
+  txtvalue=$2
+
+  HOSTINGER_Token="${HOSTINGER_Token:-$(_readaccountconf_mutable HOSTINGER_Token)}"
+
+  if [ -z "$HOSTINGER_Token" ]; then
+    HOSTINGER_Token=""
+    _err "You didn't specify a Hostinger API Key yet."
+    _err "Please read the documentation for the Hostinger API authentication at https://developers.hostinger.com/#description/authentication"
+    return 1
+  fi
+  _saveaccountconf_mutable HOSTINGER_Token "$HOSTINGER_Token"
+
+  _debug "First detect the root zone"
+  if ! _get_root "$fulldomain"; then
+    _err "invalid domain"
+    return 1
+  fi
+  _debug _sub_domain "$_sub_domain"
+  _debug _domain "$_domain"
+
+  _debug "Getting existing records"
+  _hostinger_rest GET "${_domain}"
+
+  if [ -z "$response" ]; then
+    _err "Error"
+    return 1
+  fi
+
+  if _contains "$response" "\"name\":\"$_sub_domain\""; then
+    # Match the record, and make certain it is a TXT record for the domain not another type. Then remove our target record from the list
+    remaining_records=$(echo "$response" | _normalizeJson | _egrep_o '{"name":"'"$_sub_domain"'","records":\[[^]]+\],"ttl":[0-9]+,"type":"TXT"\}' | _egrep_o "\[.*\]" | sed -E 's#\{"content":"\\"'"$txtvalue"'\\"","is_disabled":false\},?##g')
+    if [ "$remaining_records" != "[]" ]; then
+      remaining_json=$(echo "$remaining_records" | _egrep_o '"content":"\\"[^}]+\\""' | sed -E 's/^(.*)$/{\1},/g' | tr -d '\n' | sed 's/,$//')
+      # We need to set the remaining records back to Hostinger, as we can't partially delete
+      _info "Removing $txtvalue from $_sub_domain by setting records to ${remaining_json}"
+      if _hostinger_rest PUT "$_domain" "{\"zone\":[{\"name\": \"$_sub_domain\",\"records\": [${remaining_json}],\"type\":\"TXT\",\"ttl\":\"120\"}],\"overwrite\":true}"; then
+        if _contains "$response" "Request accepted"; then
+          _info "Updated remaining records, OK"
+          return 0
+        elif _contains "$response" "DNS resource record is not valid or conflicts with another resource record" ||
+          _contains "$response" 'DNS:4008'; then
+          _info "Already exists, OK"
+          return 0
+        else
+          _err "Add txt record error."
+          return 1
+        fi
+      fi
+    # Otherwise delete the TXT record that matches the subdomain
+    else
+      if ! _hostinger_rest DELETE "$_domain" "{\"filters\":[{\"name\":\"$_sub_domain\",\"type\":\"TXT\"}]}"; then
+        _err "Delete record error."
+        return 1
+      fi
+    fi
+    echo "$response" | grep "Request accepted" >/dev/null
+  else
+    _info "Don't need to remove."
+  fi
+
+}
+
+####################  Private functions below ##################################
+#_acme-challenge.www.domain.com
+#returns
+# _sub_domain=_acme-challenge.www
+# _domain=domain.com
+_get_root() {
+  domain=$1
+  i=1
+  p=1
+
+  while true; do
+    h=$(printf "%s" "$domain" | cut -d . -f "$i"-100)
+    _debug h "$h"
+    if [ -z "$h" ]; then
+      #not valid
+      return 1
+    fi
+
+    _hostinger_rest GET "$h"
+    if _contains "$response" "records"; then
+      if [ "$response" = "[]" ]; then
+        _debug "Valid subdomains are not the root"
+      else
+        _sub_domain=$(printf "%s" "$domain" | cut -d . -f 1-"$p")
+        _domain=$h
+        return 0
+      fi
+    fi
+
+    p=$i
+    i=$(_math "$i" + 1)
+  done
+  return 1
+}
+
+_hostinger_rest() {
+  m=$1
+  ep="$2"
+  data="$3"
+  _debug "$ep"
+
+  token_trimmed=$(echo "$HOSTINGER_Token" | tr -d '"')
+
+  export _H1="Content-Type: application/json"
+  export _H2="Authorization: Bearer $token_trimmed"
+
+  if [ "$m" != "GET" ]; then
+    _debug data "$data"
+    response="$(_post "$data" "$HOSTINGER_Api/$ep" "" "$m")"
+  else
+    response="$(_get "$HOSTINGER_Api/$ep")"
+  fi
+
+  if [ "$?" != "0" ]; then
+    _err "error $ep"
+    return 1
+  fi
+  _debug2 response "$response"
+  return 0
+}

dnsapi/dns_hostup.sh

@@ -6,13 +6,13 @@ Site: hostup.se
 Docs: https://developer.hostup.se/
 Options:
  HOSTUP_API_KEY     Required. HostUp API key with read:dns + write:dns + read:domains scopes.
- HOSTUP_API_BASE    Optional. Override API base URL (default: https://cloud.hostup.se/api).
+ HOSTUP_API_BASE    Optional. Override API base URL (default: https://cloud.hostup.se/api/v2).
  HOSTUP_TTL         Optional. TTL for TXT records (default: 60 seconds).
- HOSTUP_ZONE_ID     Optional. Force a specific zone ID (skip auto-detection).
+ HOSTUP_ZONE_ID     Optional. Force a specific v2 zone ID (zone_...) and skip auto-detection.
 Author: HostUp (https://cloud.hostup.se/contact/en)
 '
 
-HOSTUP_API_BASE_DEFAULT="https://cloud.hostup.se/api"
+HOSTUP_API_BASE_DEFAULT="https://cloud.hostup.se/api/v2"
 HOSTUP_DEFAULT_TTL=60
 
 # Public: add TXT record
@@ -20,6 +20,7 @@ HOSTUP_DEFAULT_TTL=60
 dns_hostup_add() {
   fulldomain="$1"
   txtvalue="$2"
+  hostup_add_txtvalue="$2"
 
   _info "Using HostUp DNS API"
 
@@ -34,31 +35,34 @@ dns_hostup_add() {
 
   record_name="$(_hostup_record_name "$fulldomain" "$HOSTUP_ZONE_DOMAIN")"
   record_name="$(_hostup_sanitize_name "$record_name")"
-  record_value="$(_hostup_json_escape "$txtvalue")"
+  hostup_add_record_value="$(_hostup_json_escape "$hostup_add_txtvalue")"
 
-  ttl="${HOSTUP_TTL:-$HOSTUP_DEFAULT_TTL}"
+  raw_ttl="${HOSTUP_TTL:-$HOSTUP_DEFAULT_TTL}"
+  ttl="$(_hostup_normalize_ttl "$raw_ttl")"
+  if [ -z "$ttl" ]; then
+    _err "HOSTUP_TTL must be a whole number between 60 and 86400 seconds."
+    return 1
+  fi
+  if [ -n "$HOSTUP_TTL" ]; then
+    HOSTUP_TTL="$ttl"
+    _saveaccountconf_mutable HOSTUP_TTL "$HOSTUP_TTL"
+  fi
 
   _debug "zone_id" "$HOSTUP_ZONE_ID"
   _debug "zone_domain" "$HOSTUP_ZONE_DOMAIN"
   _debug "record_name" "$record_name"
   _debug "ttl" "$ttl"
 
-  request_body="{\"name\":\"$record_name\",\"type\":\"TXT\",\"value\":\"$record_value\",\"ttl\":$ttl}"
-
-  if ! _hostup_rest "POST" "/dns/zones/$HOSTUP_ZONE_ID/records" "$request_body"; then
-    return 1
+  record_name_fqdn="$(_hostup_fqdn "$fulldomain")"
+  if _hostup_find_record "$HOSTUP_ZONE_ID" "$record_name_fqdn" "$hostup_add_txtvalue"; then
+    _info "TXT record already exists for $fulldomain"
+    return 0
   fi
 
-  if ! _contains "$_hostup_response" '"success":true'; then
-    _err "HostUp DNS API: failed to create TXT record for $fulldomain"
-    _debug2 "_hostup_response" "$_hostup_response"
-    return 1
-  fi
+  request_body="{\"name\":\"$record_name\",\"type\":\"TXT\",\"value\":\"$hostup_add_record_value\",\"ttl\":$ttl}"
 
-  record_id="$(_hostup_extract_record_id "$_hostup_response")"
-  if [ -n "$record_id" ]; then
-    _hostup_save_record_id "$HOSTUP_ZONE_ID" "$fulldomain" "$record_id"
-    _debug "hostup_saved_record_id" "$record_id"
+  if ! _hostup_rest "POST" "/dns-zones/$HOSTUP_ZONE_ID/records" "$request_body"; then
+    return 1
   fi
 
   _info "Added TXT record for $fulldomain"
@@ -85,20 +89,9 @@ dns_hostup_rm() {
   record_name_fqdn="$(_hostup_fqdn "$fulldomain")"
   record_value="$txtvalue"
 
-  record_id_cached="$(_hostup_get_saved_record_id "$HOSTUP_ZONE_ID" "$fulldomain")"
-  if [ -n "$record_id_cached" ]; then
-    _debug "hostup_record_id_cached" "$record_id_cached"
-    if _hostup_delete_record_by_id "$HOSTUP_ZONE_ID" "$record_id_cached"; then
-      _info "Deleted TXT record $record_id_cached"
-      _hostup_clear_record_id "$HOSTUP_ZONE_ID" "$fulldomain"
-      HOSTUP_ZONE_ID=""
-      return 0
-    fi
-  fi
-
   if ! _hostup_find_record "$HOSTUP_ZONE_ID" "$record_name_fqdn" "$record_value"; then
     _info "TXT record not found for $record_name_fqdn. Skipping removal."
-    _hostup_clear_record_id "$HOSTUP_ZONE_ID" "$fulldomain"
+    _hostup_clear_record_id "$HOSTUP_ZONE_ID" "$fulldomain" "$record_value"
     return 0
   fi
 
@@ -109,7 +102,7 @@ dns_hostup_rm() {
   fi
 
   _info "Deleted TXT record $HOSTUP_RECORD_ID"
-  _hostup_clear_record_id "$HOSTUP_ZONE_ID" "$fulldomain"
+  _hostup_clear_record_id "$HOSTUP_ZONE_ID" "$fulldomain" "$record_value"
   HOSTUP_ZONE_ID=""
   return 0
 }
@@ -127,21 +120,18 @@ _hostup_init() {
   if [ -z "$HOSTUP_API_BASE" ]; then
     HOSTUP_API_BASE="$HOSTUP_API_BASE_DEFAULT"
   fi
+  HOSTUP_API_BASE="$(_hostup_normalize_api_base "$HOSTUP_API_BASE")"
 
   if [ -z "$HOSTUP_API_KEY" ]; then
     HOSTUP_API_KEY=""
     _err "HOSTUP_API_KEY is not set."
-    _err "Please export your HostUp API key with read:dns and write:dns scopes."
+    _err "Please export your HostUp API key with read:dns, write:dns, and read:domains scopes."
     return 1
   fi
 
   _saveaccountconf_mutable HOSTUP_API_KEY "$HOSTUP_API_KEY"
   _saveaccountconf_mutable HOSTUP_API_BASE "$HOSTUP_API_BASE"
 
-  if [ -n "$HOSTUP_TTL" ]; then
-    _saveaccountconf_mutable HOSTUP_TTL "$HOSTUP_TTL"
-  fi
-
   if [ -n "$HOSTUP_ZONE_ID" ]; then
     _saveaccountconf_mutable HOSTUP_ZONE_ID "$HOSTUP_ZONE_ID"
   fi
@@ -149,11 +139,80 @@ _hostup_init() {
   return 0
 }
 
+_hostup_normalize_api_base() {
+  api_base="${1%/}"
+
+  case "$api_base" in
+  */api/v2)
+    printf "%s" "$api_base"
+    ;;
+  */api)
+    printf "%s/v2" "$api_base"
+    ;;
+  *)
+    printf "%s" "$api_base"
+    ;;
+  esac
+}
+
+_hostup_normalize_ttl() {
+  ttl_value="$1"
+
+  case "$ttl_value" in
+  "" | *[!0-9]*)
+    return 1
+    ;;
+  esac
+
+  while [ "${ttl_value#0}" != "$ttl_value" ]; do
+    ttl_value="${ttl_value#0}"
+  done
+  [ -z "$ttl_value" ] && ttl_value=0
+
+  case "$ttl_value" in
+  ??????*)
+    return 1
+    ;;
+  esac
+
+  if [ "$ttl_value" -lt 60 ] || [ "$ttl_value" -gt 86400 ]; then
+    return 1
+  fi
+
+  printf "%s" "$ttl_value"
+}
+
+_hostup_domain_in_zone() {
+  host="$(printf "%s" "${1%.}" | _lower_case)"
+  zone="$(printf "%s" "${2%.}" | _lower_case)"
+
+  if [ -z "$host" ] || [ -z "$zone" ]; then
+    return 1
+  fi
+
+  if [ "$host" = "$zone" ]; then
+    return 0
+  fi
+
+  case "$host" in
+  *."$zone")
+    return 0
+    ;;
+  esac
+
+  return 1
+}
+
 _hostup_detect_zone() {
   fulldomain="$1"
 
   if [ -n "$HOSTUP_ZONE_ID" ] && [ -n "$HOSTUP_ZONE_DOMAIN" ]; then
-    return 0
+    if _hostup_domain_in_zone "$fulldomain" "$HOSTUP_ZONE_DOMAIN"; then
+      return 0
+    fi
+    _debug "hostup_cached_zone_mismatch" "$HOSTUP_ZONE_DOMAIN"
+    HOSTUP_ZONE_ID=""
+    HOSTUP_ZONE_DOMAIN=""
   fi
 
   HOSTUP_ZONE_DOMAIN=""
@@ -162,16 +221,16 @@ _hostup_detect_zone() {
   if [ -n "$HOSTUP_ZONE_ID" ] && [ -z "$HOSTUP_ZONE_DOMAIN" ]; then
     # Attempt to fetch domain name for provided zone ID
     if _hostup_fetch_zone_details "$HOSTUP_ZONE_ID"; then
-      return 0
+      if _hostup_domain_in_zone "$fulldomain" "$HOSTUP_ZONE_DOMAIN"; then
+        return 0
+      fi
+      _debug "hostup_forced_zone_mismatch" "$HOSTUP_ZONE_DOMAIN"
     fi
     HOSTUP_ZONE_ID=""
+    HOSTUP_ZONE_DOMAIN=""
   fi
 
-  if ! _hostup_load_zones; then
-    return 1
-  fi
-
-  _domain_candidate="$(printf "%s" "$fulldomain" | _lower_case)"
+  _domain_candidate="$(printf "%s" "${fulldomain%.}" | _lower_case)"
   _debug "hostup_initial_candidate" "$_domain_candidate"
 
   while [ -n "$_domain_candidate" ]; do
@@ -240,11 +299,11 @@ _hostup_fqdn() {
 _hostup_fetch_zone_details() {
   zone_id="$1"
 
-  if ! _hostup_rest "GET" "/dns/zones/$zone_id/records" ""; then
+  if ! _hostup_rest "GET" "/dns-zones/$zone_id/records" ""; then
     return 1
   fi
 
-  zonedomain="$(printf "%s" "$_hostup_response" | _egrep_o '"domain":"[^"]*"' | sed -n '1p' | cut -d ':' -f 2 | tr -d '"')"
+  zonedomain="$(_hostup_json_extract "name" "$_hostup_response")"
   if [ -n "$zonedomain" ]; then
     HOSTUP_ZONE_DOMAIN="$zonedomain"
     return 0
@@ -254,7 +313,7 @@ _hostup_fetch_zone_details() {
 }
 
 _hostup_load_zones() {
-  if ! _hostup_rest "GET" "/dns/zones" ""; then
+  if ! _hostup_rest "GET" "/dns-zones?limit=1000" ""; then
     return 1
   fi
 
@@ -263,9 +322,9 @@ _hostup_load_zones() {
 
   while IFS= read -r line; do
     case "$line" in
-    *'"domain_id"'*'"domain"'*)
-      zone_id="$(printf "%s" "$line" | _hostup_json_extract "domain_id")"
-      zone_domain="$(printf "%s" "$line" | _hostup_json_extract "domain")"
+    *'"id"'*'"name"'*)
+      zone_id="$(_hostup_json_extract "id" "$line")"
+      zone_domain="$(_hostup_json_extract "name" "$line")"
       if [ -n "$zone_id" ] && [ -n "$zone_domain" ]; then
         HOSTUP_ZONES_CACHE="${HOSTUP_ZONES_CACHE}${zone_domain}|${zone_id}
 "
@@ -290,9 +349,30 @@ _hostup_lookup_zone() {
   _lookup_zone_id=""
   _lookup_zone_domain=""
 
+  encoded_domain="$(printf "%s" "$lookup_domain" | _url_encode)"
+  if _hostup_rest "GET" "/dns-zones?name=$encoded_domain&limit=1" ""; then
+    zone_id="$(_hostup_json_extract "id" "$_hostup_response")"
+    zone_domain="$(_hostup_json_extract "name" "$_hostup_response")"
+    if [ -n "$zone_id" ] && [ -n "$zone_domain" ]; then
+      zone_domain_lower="$(printf "%s" "$zone_domain" | _lower_case)"
+      if [ "$zone_domain_lower" = "$lookup_domain" ]; then
+        _lookup_zone_domain="$zone_domain"
+        _lookup_zone_id="$zone_id"
+        HOSTUP_ZONE_DOMAIN="$zone_domain"
+        HOSTUP_ZONE_ID="$zone_id"
+        return 0
+      fi
+    fi
+  fi
+
+  if [ -z "$HOSTUP_ZONES_CACHE" ] && ! _hostup_load_zones; then
+    return 1
+  fi
+
   while IFS='|' read -r domain zone_id; do
     [ -z "$domain" ] && continue
-    if [ "$domain" = "$lookup_domain" ]; then
+    domain_lower="$(printf "%s" "$domain" | _lower_case)"
+    if [ "$domain_lower" = "$lookup_domain" ]; then
       _lookup_zone_domain="$domain"
       _lookup_zone_id="$zone_id"
       HOSTUP_ZONE_DOMAIN="$domain"
@@ -307,50 +387,50 @@ EOF
 }
 
 _hostup_find_record() {
-  zone_id="$1"
-  fqdn="$2"
-  txtvalue="$3"
+  _hostup_find_zone_id="$1"
+  _hostup_find_fqdn="$2"
+  _hostup_find_txtvalue="$3"
 
-  if ! _hostup_rest "GET" "/dns/zones/$zone_id/records" ""; then
+  _hostup_find_encoded_name="$(printf "%s" "$_hostup_find_fqdn" | _url_encode)"
+  if ! _hostup_rest "GET" "/dns-zones/$_hostup_find_zone_id/records?type=TXT&name=$_hostup_find_encoded_name" ""; then
     return 1
   fi
 
   HOSTUP_RECORD_ID=""
-  records="$(printf "%s" "$_hostup_response" | tr '{' '\n')"
+  _hostup_find_records="$(printf "%s" "$_hostup_response" | tr '{' '\n')"
 
-  while IFS= read -r line; do
+  while IFS= read -r _hostup_find_line; do
     # Normalize line to make TXT value matching reliable
-    line_clean="$(printf "%s" "$line" | tr -d '\r\n')"
-    line_value_clean="$(printf "%s" "$line_clean" | sed 's/\\"//g')"
+    _hostup_find_line_clean="$(printf "%s" "$_hostup_find_line" | tr -d '\r\n')"
+    _hostup_find_line_value_clean="$(printf "%s" "$_hostup_find_line_clean" | sed 's/\\"//g')"
 
-    case "$line_clean" in
-    *'"type":"TXT"'*'"name"'*'"value"'*)
-      name_value="$(_hostup_json_extract "name" "$line_clean")"
-      record_value="$(_hostup_json_extract "value" "$line_value_clean")"
+    _hostup_find_record_type="$(_hostup_json_extract "type" "$_hostup_find_line_clean")"
+    [ "$_hostup_find_record_type" != "TXT" ] && continue
 
-      _debug "hostup_record_raw" "$record_value"
-      if [ "${record_value#\"}" != "$record_value" ] && [ "${record_value%\"}" != "$record_value" ]; then
-        record_value="${record_value#\"}"
-        record_value="${record_value%\"}"
-      fi
-      if [ "${record_value#\'}" != "$record_value" ] && [ "${record_value%\'}" != "$record_value" ]; then
-        record_value="${record_value#\'}"
-        record_value="${record_value%\'}"
-      fi
-      record_value="$(printf "%s" "$record_value" | tr -d '\r\n')"
-      _debug "hostup_record_value" "$record_value"
+    _hostup_find_name_value="$(_hostup_json_extract "name" "$_hostup_find_line_clean")"
+    _hostup_find_record_value="$(_hostup_json_extract "value" "$_hostup_find_line_value_clean")"
 
-      if [ "$name_value" = "$fqdn" ] && [ "$record_value" = "$txtvalue" ]; then
-        record_id="$(_hostup_json_extract "id" "$line_clean")"
-        if [ -n "$record_id" ]; then
-          HOSTUP_RECORD_ID="$record_id"
-          return 0
-        fi
+    _debug "hostup_record_raw" "$_hostup_find_record_value"
+    if [ "${_hostup_find_record_value#\"}" != "$_hostup_find_record_value" ] && [ "${_hostup_find_record_value%\"}" != "$_hostup_find_record_value" ]; then
+      _hostup_find_record_value="${_hostup_find_record_value#\"}"
+      _hostup_find_record_value="${_hostup_find_record_value%\"}"
+    fi
+    if [ "${_hostup_find_record_value#\'}" != "$_hostup_find_record_value" ] && [ "${_hostup_find_record_value%\'}" != "$_hostup_find_record_value" ]; then
+      _hostup_find_record_value="${_hostup_find_record_value#\'}"
+      _hostup_find_record_value="${_hostup_find_record_value%\'}"
+    fi
+    _hostup_find_record_value="$(printf "%s" "$_hostup_find_record_value" | tr -d '\r\n')"
+    _debug "hostup_record_value" "$_hostup_find_record_value"
+
+    if [ "$_hostup_find_name_value" = "$_hostup_find_fqdn" ] && [ "$_hostup_find_record_value" = "$_hostup_find_txtvalue" ]; then
+      _hostup_find_record_id="$(_hostup_json_extract "id" "$_hostup_find_line_clean")"
+      if [ -n "$_hostup_find_record_id" ]; then
+        HOSTUP_RECORD_ID="$_hostup_find_record_id"
+        return 0
       fi
-      ;;
-    esac
+    fi
   done <<EOF
-$records
+$_hostup_find_records
 EOF
 
   return 1
@@ -361,22 +441,22 @@ _hostup_json_extract() {
   input="${2:-$line}"
 
   # First try to extract quoted values (strings)
-  quoted_match="$(printf "%s" "$input" | _egrep_o "\"$key\":\"[^\"]*\"" | _head_n 1)"
+  quoted_match="$(printf "%s" "$input" | _egrep_o "\"$key\"[ ]*:[ ]*\"[^\"]*\"" | _head_n 1)"
   if [ -n "$quoted_match" ]; then
     printf "%s" "$quoted_match" |
       cut -d : -f2- |
-      sed 's/^"//' |
-      sed 's/"$//' |
+      sed 's/^[ ]*"//' |
+      sed 's/"[ ]*$//' |
       sed 's/\\"/"/g'
     return 0
   fi
 
   # Fallback for unquoted values (e.g., numeric IDs)
-  unquoted_match="$(printf "%s" "$input" | _egrep_o "\"$key\":[^,}]*" | _head_n 1)"
+  unquoted_match="$(printf "%s" "$input" | _egrep_o "\"$key\"[ ]*:[ ]*[^,}]*" | _head_n 1)"
   if [ -n "$unquoted_match" ]; then
     printf "%s" "$unquoted_match" |
       cut -d : -f2- |
-      tr -d '", ' |
+      tr -d '", 	' |
       tr -d '\r\n'
     return 0
   fi
@@ -391,58 +471,56 @@ _hostup_json_escape() {
 _hostup_record_key() {
   zone_id="$1"
   domain="$2"
+  txtvalue="$3"
   safe_zone="$(printf "%s" "$zone_id" | sed 's/[^A-Za-z0-9]/_/g')"
   safe_domain="$(printf "%s" "$domain" | _lower_case | sed 's/[^a-z0-9]/_/g')"
+  if [ -n "$txtvalue" ]; then
+    safe_value="$(printf "%s" "$txtvalue" | sed 's/[^A-Za-z0-9]/_/g')"
+    printf "%s_%s_%s" "$safe_zone" "$safe_domain" "$safe_value"
+    return 0
+  fi
   printf "%s_%s" "$safe_zone" "$safe_domain"
 }
 
-_hostup_save_record_id() {
-  zone_id="$1"
-  domain="$2"
-  record_id="$3"
-  key="$(_hostup_record_key "$zone_id" "$domain")"
-  _saveaccountconf_mutable "HOSTUP_RECORD_$key" "$record_id"
-}
-
-_hostup_get_saved_record_id() {
-  zone_id="$1"
-  domain="$2"
-  key="$(_hostup_record_key "$zone_id" "$domain")"
-  _readaccountconf_mutable "HOSTUP_RECORD_$key"
-}
-
 _hostup_clear_record_id() {
   zone_id="$1"
   domain="$2"
-  key="$(_hostup_record_key "$zone_id" "$domain")"
+  txtvalue="$3"
+  key="$(_hostup_record_key "$zone_id" "$domain" "$txtvalue")"
   _clearaccountconf_mutable "HOSTUP_RECORD_$key"
-}
-
-_hostup_extract_record_id() {
-  record_id="$(_hostup_json_extract "id" "$1")"
-  if [ -n "$record_id" ]; then
-    printf "%s" "$record_id"
-    return 0
+  legacy_key="$(_hostup_record_key "$zone_id" "$domain")"
+  if [ "$legacy_key" != "$key" ]; then
+    _clearaccountconf_mutable "HOSTUP_RECORD_$legacy_key"
   fi
-
-  printf "%s" "$1" | _egrep_o '"id":[0-9]+' | _head_n 1 | cut -d: -f2
 }
 
 _hostup_delete_record_by_id() {
   zone_id="$1"
   record_id="$2"
 
-  if ! _hostup_rest "DELETE" "/dns/zones/$zone_id/records/$record_id" ""; then
-    return 1
-  fi
-
-  if ! _contains "$_hostup_response" '"success":true'; then
+  if ! _hostup_rest "DELETE" "/dns-zones/$zone_id/records/$record_id" ""; then
     return 1
   fi
 
   return 0
 }
 
+_hostup_problem_error() {
+  problem_code="$(_hostup_json_extract "code" "$_hostup_response")"
+  problem_detail="$(_hostup_json_extract "detail" "$_hostup_response")"
+
+  if [ -n "$problem_detail" ]; then
+    if [ -n "$problem_code" ]; then
+      _err "HostUp API error ($problem_code): $problem_detail"
+    else
+      _err "HostUp API error: $problem_detail"
+    fi
+    return 0
+  fi
+
+  return 1
+}
+
 _hostup_rest() {
   method="$1"
   route="$2"
@@ -451,8 +529,7 @@ _hostup_rest() {
   _hostup_response=""
 
   export _H1="Authorization: Bearer $HOSTUP_API_KEY"
-  export _H2="Content-Type: application/json"
-  export _H3="Accept: application/json"
+  export _H2="Accept: application/json"
 
   if [ "$method" = "GET" ]; then
     _hostup_response="$(_get "$HOSTUP_API_BASE$route")"
@@ -464,7 +541,6 @@ _hostup_rest() {
 
   unset _H1
   unset _H2
-  unset _H3
 
   if [ "$ret" != "0" ]; then
     _err "HTTP request failed for $route"
@@ -478,23 +554,23 @@ _hostup_rest() {
   case "$http_status" in
   200 | 201 | 204) return 0 ;;
   401)
-    _err "HostUp API returned 401 Unauthorized. Check HOSTUP_API_KEY scopes and IP restrictions."
+    _hostup_problem_error || _err "HostUp API returned 401 Unauthorized. Check HOSTUP_API_KEY scopes and IP restrictions."
     return 1
     ;;
   403)
-    _err "HostUp API returned 403 Forbidden. The API key lacks required DNS scopes."
+    _hostup_problem_error || _err "HostUp API returned 403 Forbidden. The API key lacks required DNS/domain scopes."
     return 1
     ;;
   404)
-    _err "HostUp API returned 404 Not Found for $route"
+    _hostup_problem_error || _err "HostUp API returned 404 Not Found for $route"
     return 1
     ;;
   429)
-    _err "HostUp API rate limit exceeded. Please retry later."
+    _hostup_problem_error || _err "HostUp API rate limit exceeded. Please retry later."
     return 1
     ;;
   *)
-    _err "HostUp API request failed with status $http_status"
+    _hostup_problem_error || _err "HostUp API request failed with status $http_status"
     return 1
     ;;
   esac

dnsapi/dns_huaweicloud.sh

@@ -7,11 +7,11 @@ Options:
  HUAWEICLOUD_Username Username
  HUAWEICLOUD_Password Password
  HUAWEICLOUD_DomainName DomainName
+ HUAWEICLOUD_Region Region. E.g. "cn-north-4". Optional, defaults to "ap-southeast-1".
 Issues: github.com/acmesh-official/acme.sh/issues/3265
 '
 
 iam_api="https://iam.myhuaweicloud.com"
-dns_api="https://dns.ap-southeast-1.myhuaweicloud.com" # Should work
 
 ########  Public functions #####################
 
@@ -30,6 +30,7 @@ dns_huaweicloud_add() {
   HUAWEICLOUD_Username="${HUAWEICLOUD_Username:-$(_readaccountconf_mutable HUAWEICLOUD_Username)}"
   HUAWEICLOUD_Password="${HUAWEICLOUD_Password:-$(_readaccountconf_mutable HUAWEICLOUD_Password)}"
   HUAWEICLOUD_DomainName="${HUAWEICLOUD_DomainName:-$(_readaccountconf_mutable HUAWEICLOUD_DomainName)}"
+  HUAWEICLOUD_Region="${HUAWEICLOUD_Region:-$(_readaccountconf_mutable HUAWEICLOUD_Region)}"
 
   # Check information
   if [ -z "${HUAWEICLOUD_Username}" ] || [ -z "${HUAWEICLOUD_Password}" ] || [ -z "${HUAWEICLOUD_DomainName}" ]; then
@@ -37,8 +38,11 @@ dns_huaweicloud_add() {
     return 1
   fi
 
+  _huaweicloud_region="${HUAWEICLOUD_Region:-ap-southeast-1}"
+  dns_api="https://dns.${_huaweicloud_region}.myhuaweicloud.com"
+
   unset token # Clear token
-  token="$(_get_token "${HUAWEICLOUD_Username}" "${HUAWEICLOUD_Password}" "${HUAWEICLOUD_DomainName}")"
+  token="$(_get_token "${HUAWEICLOUD_Username}" "${HUAWEICLOUD_Password}" "${HUAWEICLOUD_DomainName}" "${_huaweicloud_region}")"
   if [ -z "${token}" ]; then # Check token
     _err "dns_api(dns_huaweicloud): Error getting token."
     return 1
@@ -65,6 +69,9 @@ dns_huaweicloud_add() {
   _saveaccountconf_mutable HUAWEICLOUD_Username "${HUAWEICLOUD_Username}"
   _saveaccountconf_mutable HUAWEICLOUD_Password "${HUAWEICLOUD_Password}"
   _saveaccountconf_mutable HUAWEICLOUD_DomainName "${HUAWEICLOUD_DomainName}"
+  if [ -n "${HUAWEICLOUD_Region}" ]; then
+    _saveaccountconf_mutable HUAWEICLOUD_Region "${HUAWEICLOUD_Region}"
+  fi
   return 0
 }
 
@@ -81,6 +88,7 @@ dns_huaweicloud_rm() {
   HUAWEICLOUD_Username="${HUAWEICLOUD_Username:-$(_readaccountconf_mutable HUAWEICLOUD_Username)}"
   HUAWEICLOUD_Password="${HUAWEICLOUD_Password:-$(_readaccountconf_mutable HUAWEICLOUD_Password)}"
   HUAWEICLOUD_DomainName="${HUAWEICLOUD_DomainName:-$(_readaccountconf_mutable HUAWEICLOUD_DomainName)}"
+  HUAWEICLOUD_Region="${HUAWEICLOUD_Region:-$(_readaccountconf_mutable HUAWEICLOUD_Region)}"
 
   # Check information
   if [ -z "${HUAWEICLOUD_Username}" ] || [ -z "${HUAWEICLOUD_Password}" ] || [ -z "${HUAWEICLOUD_DomainName}" ]; then
@@ -88,8 +96,11 @@ dns_huaweicloud_rm() {
     return 1
   fi
 
+  _huaweicloud_region="${HUAWEICLOUD_Region:-ap-southeast-1}"
+  dns_api="https://dns.${_huaweicloud_region}.myhuaweicloud.com"
+
   unset token # Clear token
-  token="$(_get_token "${HUAWEICLOUD_Username}" "${HUAWEICLOUD_Password}" "${HUAWEICLOUD_DomainName}")"
+  token="$(_get_token "${HUAWEICLOUD_Username}" "${HUAWEICLOUD_Password}" "${HUAWEICLOUD_DomainName}" "${_huaweicloud_region}")"
   if [ -z "${token}" ]; then # Check token
     _err "dns_api(dns_huaweicloud): Error getting token."
     return 1
@@ -298,6 +309,7 @@ _get_token() {
   _username=$1
   _password=$2
   _domain_name=$3
+  _region_name=$4
 
   _debug "Getting Token"
   body="{
@@ -318,7 +330,7 @@ _get_token() {
       },
       \"scope\": {
         \"project\": {
-          \"name\": \"ap-southeast-1\"
+          \"name\": \"${_region_name}\"
         }
       }
     }